http://blog.gmane.org/gmane.linux.swsusp.general hourly 1 1901-01-01T00:00+00:00 http://gmane.org/img/gmane-25t.png http://gmane.org http://comments.gmane.org/gmane.linux.swsusp.general/10054 <pre>Some help here please. Firstly, my 64-bit nvidia-using laptop hibernate works without compression, but can't resume when compression is turned on. Here's the dmesg - http://pastebin.com/CsXSuesZ The interesting (to me) lines are as follows:- TuxOnIce 3.2.1 (http://tuxonice.net) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 TuxOnIce: Can't translate "/dev/sda7" into a device id yet. PM: Checking hibernation image partition swap:/dev/sda7:0x1087070 PM: Hibernation image not present or could not be loaded. After this, the system continues booting as if from a cold boot. This is the contents of tuxonice.conf (minus the commented lines). lzf or lzo makes no difference. Both kernel modules have been tried either within initramfs or compiled into the kernel. UseTuxOnIce yes Reboot no EnableEscape yes DefaultConsoleLevel 7 Compressor lzo Encryptor none SuspendDevice swap:/dev/sda7:0x1087070 ProcSetting extra_pages_allowance 7500 ProcSetting userui_program /usr/sbin/tuxoniceui</pre> Oon-Ee Ng 2012-05-07T07:08:30 http://comments.gmane.org/gmane.linux.swsusp.general/10049 <pre>[Neil: Cc:ed even though this is probably a TuxOnIce problem because I figure you might be interested in crashes with md even tangentially involved, and it's right at the heart of this one, dancing a folie a deux with TuxOnIce] I see this on suspend with 3.3.4, and a kernel panic on resume (with nothing logged over the netconsole, just a quintuple pulse of the keyboard lights and a reboot during atomic copy). I'm using the 3.3-tuxonice branch merged to 3.3.4 because that branch is not at 3.3.4 itself yet. (No merge conflicts.) I'm not sure what to do about this. We can't stop md until everything is written, but it is clear that this is too late. [29422.686424] Initiating a hibernation cycle. [29455.808465] ------------[ cut here ]------------ [29455.808516] kernel BUG at block/blk-core.c:1703! [29455.808550] invalid opcode: 0000 [#1] PREEMPT SMP [29455.808584] CPU 0 [29455.808596] Modules linked in: firewire_ohci firewire_core [29455.808631] [29455.808641] Pid: 17239, comm: hibernate Not tainted 3.</pre> Nix 2012-04-30T10:29:29 http://comments.gmane.org/gmane.linux.swsusp.general/10046 <pre>Hi all, tuxonice is ready for Ubuntu 12.04 (and for many previous versions). Simply add the tuxonice PPA: https://launchpad.net/~tuxonice/+archive/ppa and install the following 3 packages: "tuxonice-userui linux-generic-tuxonice linux-headers-generic-tuxonice" On Ubuntu 12.04 hibernate is disabled by default. Re-enable it as follows: https://help.ubuntu.com/12.04/ubuntu-help/power-hibernate.html It's disabled for the LTS version of Ubuntu, since in-kernel hibernation is not reliable enough. We hope this is much better using TuxOnIce! Martin </pre> Martin Schläffer 2012-04-29T09:47:02 http://comments.gmane.org/gmane.linux.swsusp.general/10043 <pre>Has anyone succeeded in merging the latest 3.3.2 release with the 3.3 branch of tuxonice-kernel? I get conflicts in kernel/power/user.c kernel/kmod.c which I'm not entirely sure how to fix. I'm trying to merge two git branches, if that matters. Haven't tried patches. </pre> Damjan 2012-04-20T15:17:56 http://comments.gmane.org/gmane.linux.swsusp.general/10031 <pre>Hello, I have tried to use tuxonice on my laptop but after resuming from hibernation some acpi events are not working any more, lid event is not working and battery status is not being reported, the fn key events are working only switching display off is not working and AC plug events are working also. If I suspend to ram after hibernation everything is working properly after that. Also hibernation using the kernel method also works without propblems. Can somebody help me resolve this problem because I would like to use tuxonice for hibernating because it is far superior to the kernel method, it is faster and more flexible. My System Info: ASUS P31SD laptop Ubuntu 11.10 Latest x86_64 Kernel from tuxonice ppa Best regards! </pre> SkullBurner 2012-04-10T02:48:04 http://comments.gmane.org/gmane.linux.swsusp.general/10027 <pre>Hi all, there seems to be the same question on the list every now and then: "where can I find the current tuxonice patch for kernel x.y?". I want to ask the question differently: What's the best way to extract a tuxonice patch for kernel x.y from Nigel's (github) git tree? I tried a few things, but I'm sure there are people reading the list who now better how to do it right. Thanks, Martin </pre> Martin Schläffer 2012-04-06T10:00:59 http://comments.gmane.org/gmane.linux.swsusp.general/10024 <pre>Hello. I'd like to hibernate my system, which is based on linux-3.2.11 I can hibernate with echo shutdown &gt; /sys/power/disk echo disk &gt; /sys/power/state (I don't use tuxonice yet because patches to the kernel source don't seem to be available for 3.2.11) However, when I restart the system, the bluetooth device on hci0 doesn't seem to wake up, and is not available, so that hciconfig hci0 up gives No such device available Is it a bug, or an unfixable problem? Should I unload the btusb module before hibernating? Thanks! </pre> Fabrice DELENTE 2012-04-05T13:31:46 http://comments.gmane.org/gmane.linux.swsusp.general/10023 <pre>I have a problem that after resume I loose the hostname. This happens once in 3 hibernate/resume cycles with both 3.2 and now 3.3 kernels that I patch myself with TOI. I have no idea how to test this further. My system is ArchLinux with systemd. The hardware is Thinkpad X60s with a i950 gpu. </pre> Damjan 2012-03-21T22:36:27 http://comments.gmane.org/gmane.linux.swsusp.general/10022 <pre>I've compiled the latest 1.1 tuxonice userui from https://github.com/NigelCunningham/Tuxonice-Userui I'm compiling it with "make USE_FBSPLASH=yes" on ArchLinux there are some warnings when it compiles but no errors, so I guess it's all fine. The problem is that tuxonice doesn't show the graphical splash but only the text one. In the initramfs I have something like this: tuxonice_sys="/sys/power/tuxonice" tuxoniceui_cmd="/usr/sbin/tuxoniceui" if [ -c /dev/fb0 -a -d /etc/splash/tuxonice ]; then tuxoniceui_opt="-f" fi echo $tuxoniceui_cmd $tuxoniceui_opt &gt; $tuxonice_sys/user_interface/program and after resume /sys/power/tuxonice/user_interface/program does contain "/usr/sbin/tuxoniceui -f" so all seems good. Also "/usr/sbin/tuxoniceui -f -t" doesn't display the graphical splash, only the text splash, and also doesn't show any errors. How can I debug this further? </pre> Damjan 2012-03-21T20:08:01 http://comments.gmane.org/gmane.linux.swsusp.general/10017 <pre>Hi, I'm not sure if that's the right place to ask for. If not, please point me accordingly. My box hangs about every 5th to 10th resume after hibernating to disk, claiming that sda would not be present. The problem occurs with the Debian-kernel 2.6.32-5-686-bigmem as well as with a self-toasted vanilla 3.2.8. With the vanilla kernel 3.2.8 at the last resume I got this (copied by hand from a screenshot): PM: Loading and decompressing image data ... PM: Read ... kbytes in ... seconds ... sd 2:0:0:0 [sdb] Syncronizing SCSI cache sd 0:0:1:0 [sda] Syncronizing SCSI cache i0842 kbd 00:09: wake-up capability enabled by ACPI serial 00:05: disabled ahci 0000:00:11.0:PCI INT A disabled sd 0:0:1:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:1:0 [sda] Sense Key : Not Ready [current] sd 0:0:1:0 [sda] Add. Sense: Medium not present - tray closed pm_op(): scsi_bus_freeze+0x0/0x7 [scsi_mod] returns -5 PM: Device 0:0:1:0 failed to quiesce async: error -5 I already tried to unload all modules before hi</pre> Til Schubbe 2012-03-14T23:17:02 http://comments.gmane.org/gmane.linux.swsusp.general/10016 <pre>Hi, i am using tuxonice with kernel 3.0.22 and this patch http://tuxonice.net/files/current-tuxonice-for-3.0.patch.bz2 I am starting STD with a hibernation-file on a raid5-md device. Before I am stopping the system with echo &gt;/sys/power/tuxonice/do_hibernate i am checking the hwclock time. (hwclock -r) The time is correct. The system is now off. After power on I am checking on bios the system-time and the time is wrong. I found dates between 2008 and 2072. Who change this time on suspend? Thomas </pre> Thomas Himmelmann 2012-03-14T13:30:01 http://comments.gmane.org/gmane.linux.swsusp.general/10006 <pre>Hi, Firstly, I wanted to thank Nigel &amp; his team for this remarkable job! I've patched my 3.0.22 kernel with the 'current-tuxonice-for-3.0.patch' successfully. Also added support for ARM arch based on the old 'Swsusp-arm-2.6.11.patch'. The suspend works OK (completes the suspend procedure w/o any issue) The thing is that after/during resume, instead of continuing to run from the the point suspend ended at, the execution is continued from an earlier stage of the suspend (somewhere inside __save_image() ) and eventually re-writes the 'kernel &amp; process data' (see log below). The abnormal thing is the "Writing kernel &amp; process data..." right after/during resume. One important thing is, that I am looping the 'restore_pblist' to copy back pages within my swsusp_arch_resume() at swsusp.S. This same swsusp_arch_resume() function works ok with swsusp. ============== My suspend log is: ============== # echo &gt; /sys/power/tuxonice/do_hibernate TuxOnIce 3.2, with support for usm, compression, block i/o, swap storage</pre> Yechiel Cohen 2012-03-07T22:42:17 http://comments.gmane.org/gmane.linux.swsusp.general/10005 <pre>Hi, Thanks to Nigel and others for all their work on TuxOnIce. I've been using in-kernel suspend for some time on my Debian stable box, but have become frustrated with the long time taken to resume, so have been trying TOI. Kernel is 2.6.32 and latest stable TOI (3.2). I am perhaps using a more unusual configuration, / is separate non-LVM partition, formatted in xfs, system and home folders are xfs on LVM, swap is separate non-LVM partition. I use an initramfs and grub2. I followed the instructions from http://r.outlyer.net/debian:toikerneldeb (which mostly worked) as being the best I could find for my system. I also read the Arch and Slax Wikis. It'd be great if the ToI Wiki could be fixed, so there were some updated fuller instructions available. Do you recommend using the hibernate script? I wondered if someone could post a typical config file(s) for with and without the hibernate script? I have had fast and successful suspends and resumes, but also some issues... Usually suspends, but s</pre> Arthur Butler 2012-02-13T19:01:05 http://comments.gmane.org/gmane.linux.swsusp.general/10004 <pre>Hello, is there a "ready to use" patch available for the latest 3.2 kernel sources (like 3.2.5)? Regards </pre> rfk 2012-02-10T10:02:40 http://comments.gmane.org/gmane.linux.swsusp.general/10003 <pre>Hi, I am using GENTOO, which I update about once a day. I have installed sys-power/hibernate-script-2.0-r1 As source for this package Homepage: http://www.tuxonice.net/ is mentioned. My system consists of: Kernel &gt; Linux 3.2.5 (vanilla kernel) CPU &gt; AMD Phenom(tm) II X6 1090T Processor AuthenticAMD GNU/Linux MOBO &gt; ASUS Crosshair Formula 4 GRAKA1 &gt; VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1) GRAKA2 &gt; VGA compatible controller: NVIDIA Corporation GF110 [GeForce GTX 560 Ti] (rev a1) The GT430 Graka is used for desktop perposes - it is connected to my monitor. The GTX 560 Ti is used for rendering purposes only. It is not connected to any monitor. As I had installed only one of the Graka, there were no problems to hibernate the desktop pc. This was valid for both cards. As I had installed both cards to not to "lock" my desktop while rendering, peace was over...no sleep was the result. When I try to hibernate my PC to disk, the script runs until </pre> meino.cramer< at >gmx.de 2012-02-07T18:03:14 http://comments.gmane.org/gmane.linux.swsusp.general/9999 <pre>Hello, I am planning on installing TuxOnIce to CentOS Rocks Linux 5.4.3 (Viper). The Kernel information is 2.6.18-238.19.1-el5 x86_64. Is it possible to install TuxOnIce to this kind of operating system, and which one of the source files found on http://tuxonice.net/ should be downloaded for the installation? I could not find any installation instructions on the TuxOnIce website, can they be found somewhere? BR, Olli _______________________________________________ TuxOnIce-users mailing list TuxOnIce-users&lt; at &gt;lists.tuxonice.net http://lists.tuxonice.net/listinfo/tuxonice-users</pre> Mämmelä Olli 2012-02-03T08:25:40 http://comments.gmane.org/gmane.linux.swsusp.general/9998 <pre>_______________________________________________ TuxOnIce-users mailing list TuxOnIce-users&lt; at &gt;lists.tuxonice.net http://lists.tuxonice.net/listinfo/tuxonice-users</pre> Arthur Butler 2012-01-28T20:06:48 http://comments.gmane.org/gmane.linux.swsusp.general/9996 <pre>Hi, I have an (apparently) random problem with tuxonice not resuming. Hibernation the night before works fine. When testing by resuming immediately afterwards it seems to work fine (also, no issues once resume is completed). Some mornings resume works fine and very quickly. Other mornings it stops resuming at around 300MB and freezes at that point. Leaving it this way for a while does not change anything (ESC does nothing), requires a hard reboot (holding power button and booting ubuntu normally). Other mornings it resumes just fine and I am up and running in a minute. I have not been able to find any particular pattern (same programs open at hibernate). Here is the pm-suspend.log from last night when everything seemed to work fine (freeze happened again this morning): ------------------------------------------------------------------------------- Initial commandline parameters: Wed Jan 18 19:12:42 CET 2012: Running hooks for hibernate. Running hook /usr/lib/pm-utils/sleep.d/000kernel-change hibernate hib</pre> Matthis Drolet 2012-01-19T09:24:46 http://comments.gmane.org/gmane.linux.swsusp.general/9994 <pre>Hi, I'm aware that there's some development being done regarding tux-on-ice in relation to linux-3.1 and linux-3.2 (see http://git.tuxonice.net/?p=tuxonice-head.git;a=tag;h=refs/tags/TuxOnIce-3.2.1-for-Linux-3.2.0-rc7 ). Without wanting to add unnecessary workload to Nigel, I'm wondering whether there's a way for me to download a TOI patch for linux-3.2. In a similar previous post to this ML someone posted up a patch as an attachment, but for my purposes (maintaining an Arch User PKGBUILD) I'd need a publicly available tarball patch. If its not possible that's fine, I'm sure there's good reasons none have been released since 3.0. Just thought I'd ask, in case there's (for example) some equivalent to github's 'tarball-from-tag' feature that can be used here. </pre> Oon-Ee Ng 2012-01-16T07:22:49 http://comments.gmane.org/gmane.linux.swsusp.general/9989 <pre> Hi: I rarely write to the list, but I try to follow it as much as possible. I noticed too late about the TOI end thread. I'd like to take this chance to congratulate and thank for the effort you people are doing, and specially Nigel for sure. You rock! Now my issue. I can't remember exactly when, maybe some months, maybe around a year ago, I started to see this kind of messages on all of the consoles in my system, this includes the opened yakuake (a KDE console terminal) sessions. When I hibernate, I see messages, like the ones in the attached file, cluttering the yakuake console sessions. I'm not sure what the reason for this may be and how to avoid them. Ideas welcome. Thanks and regards. </pre> Raúl Sánchez Siles 2012-01-11T20:21:24 http://comments.gmane.org/gmane.linux.swsusp.general/9988 <pre>hi, guys, I am trying to port tuxonice to devkit8000. the system condition is below: kernel version 2.6.29 + android 2.2 UBOOT settings: bootargs=console=ttyS2,115200n8 root=/dev/mmcblk0p2 init=/init bootdelay=1 video=omapfb:43.inch_LCD resume=/dev/block/mmcbkl0p3 starting info: Power Management for TI OMAP3. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 TuxOnIce 3.2 (http://tuxonice.net) TuxOnIce: Can't translate "/dev/block/mmcblk0p3" into a device id yet. twl4030_rtc twl4030_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions: 1f00 512 mtdblock0 (driver?) 1f01 1920 mtdblock1 (driver?) 1f02 128 mtdblock2 (driver?) 1f03 4096 mtdblock3 (driver?) 1f04 124416 mtdblock4 (driver?) Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) </pre> pingwei.wu 2011-12-19T05:55:06 Search the mailing list at Gmane query http://search.gmane.org/?group=$group=gmane.linux.swsusp.general