gmane.linux.drivers.sensors

Supermicro X8DTN config file

Gary E. Miller — 2012-05-25T18:10:56

Yo lm-sesors!

See below for a working sensors3.conf file for the Supermicro X8DTN
motherboard.

How do I get it posted on the wiki for others to use?

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97701
gem< at >rellim.com  Tel:+1(541)382-8588

# /etc/sensors.d/X8DTN
# settings for the supermicro X8DTN
# originally written by Gary E. Miller <gem< at >rellim.com>
# use at your own risk !
# Date: 25 May 2012

# Here's the info as supplied by Supermicro:

#
# Bus Type = ISAIO/SMBus
# One W83795AG
# 
# Windbond W83795AG, Slave Address=0x2f (0x5E in 8-Bit format)
# =============================================================
# Fan1 Fan Speed, Offset 0x2eRPM = 84375/Data
# Fan2 Fan Speed, Offset 0x2fRPM = 84375/Data
# Fan3 Fan Speed, Offset 0x30RPM = 84375/Data
# Fan4 Fan Speed, Offset 0x31RPM = 84375/Data
# Fan5 Fan Speed, Offset 0x32RPM = 84375/Data
# Fan6 Fan Speed, Offset 0x33RPM = 84375/Data
# Fan7 Fan

rocky hu与您共享了照片

rocky hu — 2012-05-24T16:36:16

If you are anxious for not find good supplier ? please contact us, we will  
offer you best service.
we are serious business person.

wholesale Louis Vuitton, Gucci, Fendi, Prada, Hermes, Chloe, Balenciage,  
Chanel, Coach, Jimmy choo, Juicy etc.

Such as Handbags, Wallets, T-shirt, sport shoes, Jerseys,Jackets,  
Jeans,Jewelry, hoody, Sunglasses, Belts, Bikini, Boots, the north face  
jacket ect

Website: www.sobagssoyou.com


Payment: Paypal, western union,Money Gram

Shipping: 5-6 business days
  more order, more discount

Hope to do business with you.
Email:cnwholesalelist< at >hotmail.com
_______________________________________________
lm-sensors mailing list
lm-sensors< at >lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

[patch] watchdog: sch56xx-common: set correct bits inregister()

Dan Carpenter — 2012-05-24T15:58:02

WDOG_NO_WAY_OUT (3) and WDOG_ACTIVE (0) are the bit numbers, not a mask.
So "data->wddev.status |= WDOG_ACTIVE;" was intended to set bit zero but
it is a no-op.

Signed-off-by: Dan Carpenter <dan.carpenter< at >oracle.com>

diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c
index 839087c..4380f5d 100644
--- a/drivers/hwmon/sch56xx-common.c
+++ b/drivers/hwmon/sch56xx-common.c
< at >< at > -464,9 +464,9 < at >< at > struct sch56xx_watchdog_data *sch56xx_watchdog_register(struct device *parent,
 data->wddev.min_timeout = 1;
 data->wddev.max_timeout = 255 * 60;
 if (nowayout)
-data->wddev.status |= WDOG_NO_WAY_OUT;
+set_bit(WDOG_NO_WAY_OUT, &data->wddev.status);
 if (output_enable & SCH56XX_WDOG_OUTPUT_ENABLE)
-data->wddev.status |= WDOG_ACTIVE;
+set_bit(WDOG_ACTIVE, &data->wddev.status);
 
 /* Since the watchdog uses a downcounter there is no register to read
    the BIOS set timeout from (if any was set at all) ->

_______________________________________________
lm-sensors mailing list
lm-senso

Nuvoton NCT6776D - AsRock

clement clem — 2012-05-23T16:25:06

Hello to all,

Have a new card *AsRock B75 Pro 3 M* yesterday.

This card uses a new chip *Nuvoton NCT6776D.*

Can we have full support for Lm-Sensors ?

For now only the temperature of my i3 2100 are displayed.


Thank you for your help.

Clem from South France
_______________________________________________
lm-sensors mailing list
lm-sensors< at >lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

lavoriamo insieme

Lucia Casati — 2012-05-23T10:05:18

Salve,

vorrei cogliere questa occasione per presentarmi.
Il mio nome &egrave; Lucia Casati e sono la responsabile di Italy-SEO.

Lavoro al fianco di numerosi siti internet. Gestisco il loro SEO
in base alle particolarit&agrave; dei maggiori motori di ricerca on line,
tra cui Google, Bing e Yahoo.

Lavorando al sito web di uno dei miei partner lavorativi,
ho incrociato lists.lm-sensors.org
Sono convinta di poter esserle utile per incrementare il traffico,
la visibilit&agrave; e il Page Rank del suo sito.

Se interessato, sarei pi&ugrave; che felice di elaborare meglio
i dettagli della mia proposta di assistenza.

Le auguro una buona giornata,

Lucia Casati
Italyseo.com

_______________________________________________
lm-sensors mailing list
lm-sensors< at >lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

ASUS Sabertooth Z77 / nct6775.ko report

Dmitriy Pinchukov — 2012-05-23T09:37:30

Hi,

Got a new ASUS Sabertooth Z77 mobo recently and found out that lm-sensors didn't support
anything but the core temperatures and also a couple ones from the
'acpitz-virtual-0' device. Trying the trunk version of sensors-detect didn't help.

I then searched and finally found the shiny new 'nct6775' driver. Compiled and loaded it successfully (linux 3.4.0 x86_64):

[ 1082.377370] nct6775: Found NCT6779D chip at 0x290

Here's how my sensors output looking now (lm-sensors 3.3.2 from Debian wheezy/sid):

acpitz-virtual-0
Adapter: Virtual device
temp1:        +27.8°C  (crit = +106.0°C)
temp2:        +29.8°C  (crit = +106.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +45.0°C  (high = +85.0°C, crit = +105.0°C)
Core 0:         +44.0°C  (high = +85.0°C, crit = +105.0°C)
Core 1:         +45.0°C  (high = +85.0°C, crit = +105.0°C)
Core 2:         +43.0°C  (high = +85.0°C, crit = +105.0°C)
Core 3:         +43.0°C  (high = +85.0°C, crit = +105.0°C)

nct6779-isa

ASRock 970 Extreme3

James — 2012-05-21T13:45:53

I use the nct6776-isa-0290
Adapter: ISA adapter

I have 3 fans:
1. The CPU fan (about 3300 RPM)
2. The rear case fan (about 1050 RPM)
3. The front case fan (about 1350 RPM)

Do the fans in Power Supplies typically get monitored?

I have 6 fan connectors:
1. Chassis fan connector (#12 on the motherboard)
2. Chassis fan connector (#15 on the motherboard)
3. Chassis fan connector (#2 on the motherboard)
1. CPU fan connector (#6 on the motherboard)
2. CPU fan connector (#5 on the motherboard)
1. Power fan connector (#10 on the motherboard)

Maybe someone can see a pattern.

1. I plugged the rear case fan in #12
fan1 was 1060 RPM (the rear case fan probably)
fan2 was 3300 RPM (the CPU  fan probably)
other fans reported 0 RPMs

2. I plugged the rear case fan in #2
all fans reported 0 RPM
other fans reported 0 RPMs

3. I plugged the rear case fan in #12 and the front case fan in #15.
fan1 was 1053 RPM (the rear case fan probably)
fan2 was 3316 (the CPU fan probably)
other fans reported 0 RPMs

4. I plugged the rear

[PATCH] hwmon: Driver for Nuvoton NCT6775F, NCT6776F,and NCT6779D

Guenter Roeck — 2012-05-21T02:40:31

This driver will replace the w83627ehf driver for NCT6775F and NCT6776F,
and provides support for NCT6779D.

Signed-off-by: Guenter Roeck <linux< at >roeck-us.net>
---

Successfully tested on all supported chips. Time to submit for a first round of
reviews.

A new driver was chosen instead of adding support for NCT6779D to the w83627ehf
driver, since the amount of conditional code was getting too large to manage.
Also, with a new driver it was easier to implement additional fan control
support.

The driver implements a number of non-standard sysfs attributes for fan control.

TODO: Update Documentation/hwmon/nct6775 to list all supported sysfs attributes
(after we have an agreement about the non-standard attributes).

 Documentation/hwmon/nct6775 |  138 ++
 drivers/hwmon/Kconfig       |   13 +
 drivers/hwmon/Makefile      |    1 +
 drivers/hwmon/nct6775.c     | 3832 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 3984 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/hwmon/nct6775
 cre

gelegenheit zur webverbesserung

Sven Daffner — 2012-05-21T03:01:36

Hallo,

Mein Name ist Sven und ich bin der Webmaster von SEO DE.

Nebenbei arbeite ich auch f&uuml;r meine anderen Projekt-Webseiten und dadurch
stie&szlig; ich auf lists.lm-sensors.org und ich sch&auml;tze wirklich das gute Design und die Informationen.

Ich habe Seiten von sehr guter Qualit&auml;t , von wo aus Sie verlinkt w&uuml;rden.
Wie Sie vielleicht wissen, Links von guter Qualit&auml;t k&ouml;nnenauf jeden Fall
helfen beim Page Rank, Verkehr und bei h&ouml;herer Platzierung in den wichtigsten Suchmaschinen
wie Google, Yahoo und Bing.

Sollten Sie Interesse an weiteren Details haben, dann melden Sie sich bitte zur&uuml;ck bei mir
und ich werde Ihnen den perfekte Vorschlag f&uuml;r Ihre Website machen, der bei der Verbesserung
Ihrer Website in allen Aspektenhilft.

Hoffebaldvon Ihnen zu h&ouml;ren und einen sch&ouml;nen Tag w&uuml;nsche ich Ihnen

Mit freundlichen Gr&uuml;&szlig;en,

Sven Daffner
SEOde.org

_______________________________________________
lm-sensors mailing list
lm-sensors< at >lm-sensors.or

[PATCH] sensors-detect: Add detection of NCT6779D andNCT6102D/NCT6106D

Guenter Roeck — 2012-05-21T00:59:36

Signed-off-by: Guenter Roeck <linux< at >roeck-us.net>
---
 CHANGES                    |    1 +
 prog/detect/sensors-detect |   12 ++++++++++++
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/CHANGES b/CHANGES
index 615ed65..b08d205 100644
--- a/CHANGES
+++ b/CHANGES
< at >< at > -6,6 +6,7 < at >< at > SVN HEAD
   sensors: Fix libiconv linkage need detection in rare corner case
   sensors-detect: Don't choke on systems without PCI
                   Avoid probing EDID addresses on graphics cards (#2386)
+  Add detection of NCT6779D and NCT6102D/NCT6106D
 
 3.3.2 (2012-03-14)
   libsensors: Added support for new sysfs attributes
diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect
index 58f7fd0..6bfd1e2 100755
--- a/prog/detect/sensors-detect
+++ b/prog/detect/sensors-detect
< at >< at > -2034,6 +2034,18 < at >< at > use constant FEAT_SMBUS=> (1 << 7);
 logdev => 0x0b,
 features => FEAT_IN | FEAT_FAN | FEAT_TEMP,
 }, {
+name => "Nuvoton NCT6779D Super IO Sensors",
+driver => "to-be-written",# nct6775, new dr

Fan control for Asus P8Z77

Andrée 'Glaucous' — 2012-05-20T17:19:46

Hi,

The (somewhat) new Asus P8Z77 boards have arrived, I'm wondering how the
status for fan control is for them?
I have a Asus P8Z77-V Pro, tried both it87 and asus_atk0110, both result in
that pwmconfig cannot find any controllable fans.

Currently running libsensors version 3.3.2+SVN. I'm up for testing any
patches related to this chipset.
_______________________________________________
lm-sensors mailing list
lm-sensors< at >lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

[PATCH 1/2] hwmon: (pmbus) Add support fornon-standard status register

Guenter Roeck — 2012-05-19T18:48:19

Not all PMBus devices support the byte status register at 0x78.
Add support for non-standard status registers to work around this problem.

Signed-off-by: Guenter Roeck <linux< at >roeck-us.net>
---
 drivers/hwmon/pmbus/pmbus.h      |    1 +
 drivers/hwmon/pmbus/pmbus_core.c |   13 +++++++++----
 2 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index 3fe03dc..8073dc4 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
< at >< at > -332,6 +332,7 < at >< at > struct pmbus_driver_info {
 int R[PSC_NUM_CLASSES];/* exponent */
 
 u32 func[PMBUS_PAGES];/* Functionality, per page */
+u8 status_register;/* Set if not PMBUS_STATUS_BYTE */
 /*
  * The following functions map manufacturing specific register values
  * to PMBus standard register values. Specify only if mapping is
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 29b319d..0d8d50c 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/

[SPAM:4.1] International Order

Robertson Spencer — 2012-05-16T17:50:15

 Hello Sales
      I went over your contact online and found some items which we have interest in purchasing to our store in Spain for urgent supply. I will like to know the prices per each items plus the shipping cost. I Also want to know if Letter of Credit or T/T is acceptable for payment. I await your quick response asap so i can proceed with my needed items and quantity.

Thank you
Robertson Spencer


N.B.M Supply Inc
Address: Autovía A-5, 
salidas 22 y 26. 
Arroyomolinos, 
28939 Madrid Spain
Tel: +34 902 26 77 26
Email: robertsonspencer1< at >gmail.com
Website : http://www.brplastics.com



_______________________________________________
lm-sensors mailing list
lm-sensors< at >lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

[PATCH] hwmon: (it87) Drop uart6 condition forvin5&vin6 for IT8783F

Björn Gerhart — 2012-05-15T17:25:03

From: Bjoern Gerhart <oss< at >extracloud.de>

Drop UART6 condition for IT8783F related to VIN5 and VIN6.
In case UART6 is routed via JP4 to a different set of pins,
VIN5 and VIN6 can be used at the same time.

diff -Naur a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
--- a/drivers/hwmon/it87.c2012-05-15 16:53:07.156061059 +0200
+++ b/drivers/hwmon/it87.c2012-05-15 17:19:31.717061875 +0200
< at >< at > -1806,11 +1806,11 < at >< at >
 sio_data->skip_pwm |= (1 << 1);
 
 /* VIN5 */
-if ((reg27 & (1 << 0)) || uart6)
+if (reg27 & (1 << 0))
 sio_data->skip_in |= (1 << 5); /* No VIN5 */
 
 /* VIN6 */
-if ((reg27 & (1 << 1)) || uart6)
+if (reg27 & (1 << 1))
 sio_data->skip_in |= (1 << 6); /* No VIN6 */
 
 /*



_______________________________________________
lm-sensors mailing list
lm-sensors< at >lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

HP TONERS Cartridge

dan rhodes — 2012-05-14T04:50:40

Can  you  send  me  the pricing  and  availablity  of this  product

 LASER JET PRINT CARTRIDGE, (OEM ONLY)
 HP LASER JET PRINT CARTRIDGE
 1Q6000A (OEM ONLY)
 2. HEWC9730A (30A) (OEM ONLY)
 3. HEWC9731A (31A) (OEM ONLY)
 4. Q5942A (42A)(OEM ONLY)
 5. HP Q7551A (51A)(OEM ONLY)
 6. HP Q3964A (64A) BLACK  COULOUR ONLY (OEM ONLY)
 7  HP    Q7553A 53A)  OEM ONLY
 8 NEW & USED, COMPUTERS  NOTEBOOK
9 USB  FLASH  DRIVES

 The mode of our  payment  is   with  our visa, master
 cards


Hope  to  read  from  you  asap
DAN RHODES
CA 90703





_______________________________________________
lm-sensors mailing list
lm-sensors< at >lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Howto compile py-smbus with python 3.2

Bernhard Renz — 2012-05-14T08:36:47

Hello < at >All,

i try to compile i2c-tools-3.1.0 py-smbus, smbusmodule.c with the following command under Ubuntu 12.04:
python3.2 ./setup.py build

But it fail. With Python 2.7 it works.
Has onlybody a solution to use that module with python 3.2?

With kind regards
Bernhard

Community & educational development

AP — 2012-05-14T01:32:34

PRESS RELEASE

The American Grants and Loans Catalog is now available. Our new and revised
2012 edition contains more than 2800 financial programs, subsidies, scholarships,
grants and loans offered by the US federal government.

In addition you will also have access to over 2400 programs funded by private
corporations and foundations. That is over 5200 programs available through
various sources of financial providing organizations.

NEW: You will also have access to our live Database that is updated on a daily
basis. This product also provides daily email alerts as programs are announced.

The Database is also available with IP recognition. This allows you to login
without a username or password (Great for libraries or educational institutions
who want their users to access the database).

Businesses, students, researchers, scientists, teachers, doctors, private individuals,
municipalities, government departments, educational institutions, law enforcement
agencies, nonprofits, foundations and associations wi

missing fan RPMS

James — 2012-05-12T21:25:21

I bought a new motherboard (ASRock 970 Extreme3) and it doesn't report the fans.

# sensors-detect
Driver `adt7475':
  * Bus `nouveau-0000:01:00.0-2'
    Busdriver `drm', I2C address 0x2e
    Chip `Analog Devices ADT7473' (confidence: 5)

Driver `w83627ehf':
  * ISA bus, address 0x290
    Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9)

Driver `fam15h_power':
  * Chip `AMD Family 15h power sensors' (confidence: 9)

Driver `k10temp':
  * Chip `AMD Family 15h thermal sensors' (confidence: 9)


# sensors            
nouveau-pci-0100
Adapter: PCI adapter
temp1:         +0.0 C  (high = +100.0 C, crit = +110.0 C)

fam15h_power-pci-00c4
Adapter: PCI adapter
power1:      101.61 W  (crit =  95.01 W)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +15.8 C  (high = +70.0 C)
                       (crit = +70.0 C, hyst = +67.0 C)

nct6776-isa-0290
Adapter: ISA adapter
Vcore:        +0.86 V  (min =  +0.00 V, max =  +1.74 V)
in1:          +1.85 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
AVCC:         +3.33

[PATCH] hwmon: INA219 and INA226 support

Guenter Roeck — 2012-05-12T19:50:18

From: "Felten, Lothar" <l-felten< at >ti.com>

Add support for the Texas Instruments INA219 and INA226 power monitors.

Signed-off-by: Lothar Felten <l-felten< at >ti.com>
[guenter.roeck< at >ericsson.com: Cosmetic formatting changes]
Signed-off-by: Guenter Roeck <guenter.roeck< at >ericsson.com>
---
Just realized Lothar forgot to copy the list on this. So here it is.

 Documentation/hwmon/ina2xx           |   29 +++
 drivers/hwmon/Kconfig                |   13 ++
 drivers/hwmon/Makefile               |    1 +
 drivers/hwmon/ina2xx.c               |  368 ++++++++++++++++++++++++++++++++++
 include/linux/platform_data/ina2xx.h |   19 ++
 5 files changed, 430 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/hwmon/ina2xx
 create mode 100644 drivers/hwmon/ina2xx.c
 create mode 100644 include/linux/platform_data/ina2xx.h

diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
new file mode 100644
index 0000000..f50a6cc
--- /dev/null
+++ b/Documentation/hwmon/ina2xx
< at >< at > -0,0 +1,29 < at >< at >
+Kernel driver ina2xx

fancontrol and applesmc

Jérémy Lal — 2012-05-11T22:27:07

Hi,
i managed to get fancontrol to play nice with applesmc,
the only modification i had to make was to allow unbounded
PWM values (i basically removed the <= 255 condition, there
is still a small issue with pwmenable/disable functions).

That kind of fancontrol config works quite well :

DEVPATH=hwmon0=devices/platform/applesmc.768
DEVNAME=hwmon0=applesmc
INTERVAL=10
# fan1 : Optical Disk Drive, near GPU, temp15 : TG0D GPU Die
# fan2 : Hard Disk Drive, temp45 : Tp1P Power board
# fan3 : CPU, temp5 : TC0P CPU Proximity
FCTEMPS=hwmon0/device/fan1_min=hwmon0/device/temp15_input hwmon0/device/fan2_min=hwmon0/device/temp45_input hwmon0/device/fan3_min=hwmon0/device/temp5_input
FCFANS=hwmon0/device/fan1_min=hwmon0/device/fan1_output hwmon0/device/fan2_min=hwmon0/device/fan2_output hwmon0/device/fan3_min=hwmon0/device/fan3_output
MINPWM=hwmon0/device/fan1_min=100 hwmon0/device/fan2_min=100 hwmon0/device/fan3_min=800
MAXPWM=hwmon0/device/fan1_min=2100 hwmon0/device/fan2_min=5500 hwmon0/device/fan3_min=2500
MINTEMP=h

[PATCH v2] hwmon: (it87) Convert to use devm_kzallocand devm_request_region

Guenter Roeck — 2012-05-11T21:42:32

From: Guenter Roeck <linux< at >roeck-us.net>

This makes the code a bit simpler and smaller.

Signed-off-by: Guenter Roeck <linux< at >roeck-us.net>
---
v2: Also convert devm_request_region for further simplification

 drivers/hwmon/it87.c |   32 +++++++++-----------------------
 1 files changed, 9 insertions(+), 23 deletions(-)

diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index e2e68eb..5f65fef 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
< at >< at > -1968,19 +1968,17 < at >< at > static int __devinit it87_probe(struct platform_device *pdev)
 };
 
 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-if (!request_region(res->start, IT87_EC_EXTENT, DRVNAME)) {
+if (!devm_request_region(&pdev->dev, res->start, IT87_EC_EXTENT,
+ DRVNAME)) {
 dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
 (unsigned long)res->start,
 (unsigned long)(res->start + IT87_EC_EXTENT - 1));
-err = -EBUSY;
-goto ERROR0;
+return -EBUSY;
 }
 
-data = kzalloc(sizeof(struct it87_data), GFP_KERNEL);
-if (!