http://blog.gmane.org/gmane.network.tight-vnc.general hourly 1 1901-01-01T00:00+00:00 http://gmane.org/img/gmane-25t.png http://gmane.org http://comments.gmane.org/gmane.network.tight-vnc.general/10408 <pre>Hi all! TightVNC Dispatcher was announced rather long time ago. As far as I understood it’s a kind of proxy to connect client and server to each other. Are you still working on it? Regards den ------------------------------------------------------------------------------ Try New Relic Now &amp; We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, &amp; servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_may___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> den 2013-05-21T11:35:39 http://comments.gmane.org/gmane.network.tight-vnc.general/10407 <pre>Hi, does anyone know why I get this message when connecting to a TightVNC server? ------------------------------------------------------------------------------ AlienVault Unified Security Management (USM) platform delivers complete security visibility with the essential security capabilities. Easily and efficiently configure, manage, and operate all of your security controls from a single console and one unified framework. Download a free trial. http://p.sf.net/sfu/alienvault_d2d___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Edmund 2013-05-18T17:13:49 http://comments.gmane.org/gmane.network.tight-vnc.general/10406 <pre>Hi I'm using tightvnc to access my machines. Using a browser, on port 5801 I used to get a usual login screen as you'd get it when sitting in front of the machine. As of this week the login won't come up any longer. The background image is loaded and that's it. No login/password prompt. I can still start sessions for specific users from the command line and access them on other ports. I already reinstalled tighvnc and double checked the ports being open in the firewall. Where else could I look for the cause of the problem? -- View this message in context: http://tightvnc.10971.n7.nabble.com/login-screen-not-showing-up-tp3556.html Sent from the VNC Tight List mailing list archive at Nabble.com. ------------------------------------------------------------------------------ AlienVault Unified Security Management (USM) platform delivers complete security visibility with the essential security capabilities. Easily and efficiently configure, manage, and operate all of your security controls from a single console and one unified framework. Download a free trial. http://p.sf.net/sfu/alienvault_d2d ___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Reims 2013-05-17T12:40:14 http://comments.gmane.org/gmane.network.tight-vnc.general/10402 <pre>After I upgrade my AV to Kaspersky endpoint security 10 on the remote computer I can open the Kaspersky console BUT after that I can't click all tab in that console and can't close that console, just kaspersky other apps in remote PC is normal. Before I upgrade the AV to ver 10 everything is normal on Kaspersky ver 6. Any info ? Thanks ------------------------------------------------------------------------------ AlienVault Unified Security Management (USM) platform delivers complete security visibility with the essential security capabilities. Easily and efficiently configure, manage, and operate all of your security controls from a single console and one unified framework. Download a free trial. http://p.sf.net/sfu/alienvault_d2d ___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Ivan Leonardo 2013-05-16T01:07:35 http://comments.gmane.org/gmane.network.tight-vnc.general/10400 <pre>Details: 3 monitor setup: 2 monitors connected to a Nvidia card, 3rd monitor connected to Intel integrated graphics Teamviewer, Crossloop, LogMeIn all display &amp; handle this three monitor setup just fine. A) However when I connect using TightVNC only the right most monitor is displayed yet the mouse actions sent via TightVNC are applied to the left most monitor. Here is a link to a rough video showing this behavior using simultaneous teamviewer connections to the host &amp; VM, plus a TightVNC connection to the host: https://docs.google.com/file/d/0B1O4HMQ4myAdT0NkRExpWEU4UTA/edit?usp=sharing in the video: --top window is connection via teamviewer to the host. Also shows an active windows remote desktop connection to a virtual machine (VM). --middle connection is teamviewer connection directly to the VM running on the host, B) note (more below): this teamviewer connection does not terminate the widows remote desktop connection between host &amp; VM where as connections with logmein, crossloop(ultravnc), TightVNC all cause the host windows remote desktop session to the VM to end (not shown in the video) --bottom connection is the mis-behaving TightVNC connection to the host. I welcome suggestions regarding TightVNC &amp; multiple monitor setups that might resolve this. B) Also, more on the above note: somehow Teamviewer's type of connection directly to the VM does not cause the windows remote desktop connection from the host to the VM to disconnect.  If there is a setting that keeps TightVNC from disconnecting the remote desktop connection to the VM, please let me know.  This is valuable for reasons such as the remote desktop session runs at full 3 monitor resolution plus supports shared drives, etc with the host and enables users at the host side to see what I am seeing on the VM at the same time. Thank you, Chad------------------------------------------------------------------------------ AlienVault Unified Security Management (USM) platform delivers complete security visibility with the essential security capabilities. Easily and efficiently configure, manage, and operate all of your security controls from a single console and one unified framework. Download a free trial. http://p.sf.net/sfu/alienvault_d2d___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Chad Ledgett 2013-05-15T22:33:13 http://comments.gmane.org/gmane.network.tight-vnc.general/10398 <pre>Hi all I have am facing a issue in Tight VNC , If someone can help it will be appreciated. Problem: I am accessing a server (Windows Server 2008, Tight VNC Server installed ) from my desktop using Tight VNC View. Everything is working fine except one problem . I am remoting other servers from that VNC session using Microsoft remote desktop connection and when I do Caps lock of keyboard is not working. I am not able to type Caps letter and special characters. Regards Rohit Saluja Copyright Policy: Except where otherwise stated, the copyright and all other intellectual property rights in the contents and any files transmitted with this email (including but not limited to, designs, texts, and layout) are the property of Ministry of Oil and Gas. As such, they may not be reproduced, transmitted, or altered, in anyway whatsoever howsoever, without the express written permission of Ministry of Oil and Gas. Disclaimer: Ministry of Oil and Gas, assumes no responsibility for the results of any actions taken on the basis of information contained in this email and any files transmitted with it, nor for the accuracy, adequacy, completeness, or reasonableness of any material contained herein. Ministry of Oil and Gas also disclaims liability for any errors in , or omissions from, such information and materials. Confidential Policy: This email and any files transmitted it contain information, which may be confidential and proprietary information of Ministry of Oil and Gas. It is intended solely for the use of the individual or the entity to which they are addressed. If you are not the intended recipient, please be advised that you have received this email in error and that any use, dissemination, forwarding or printing of this email is strictly prohibited. If you have received this email in error, please notify us by returning the email at the address above and delete all copies from your system. Thank for your cooperation. Ministry of Oil and Gas. ------------------------------------------------------------------------------ AlienVault Unified Security Management (USM) platform delivers complete security visibility with the essential security capabilities. Easily and efficiently configure, manage, and operate all of your security controls from a single console and one unified framework. Download a free trial. http://p.sf.net/sfu/alienvault_d2d___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Rohit Saluja 2013-05-15T04:44:56 http://comments.gmane.org/gmane.network.tight-vnc.general/10392 <pre>I've had no problems with the Tight VNC program until now. The last time I connected to the host (server), I clicked on a .JPG image an selected "view in Windows Explorer." I shut down the host machine properly, but now I can't connect to it anymore. The prompt tells me that either the host can't be found, or that it's taking too long. The only way I see to repair this is to connect the old monitor, keyboard, and mouse to the host machine and reinstall the Tight VNC program, which is very inconvenient. Doe anyone know of any other cure?  ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. This 200-page book is written by three acclaimed leaders in the field. The early access version is available now. Download your free book today! http://p.sf.net/sfu/neotech_d2d_may___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Bob 2013-05-12T13:20:36 http://comments.gmane.org/gmane.network.tight-vnc.general/10391 <pre>Hello all I am using windows8 - 32 bit and I have installed tightvnc-2.7.1-setup-32bit.msi on my machine. When I connect my machine as "Tight VNC Viewer" to a remote 64 bit Windows "Tight VNC Server" machine which is also running windows 8 with tightvnc-2.7.1-setup-64bit.msi installed, I see a distorted remote screen like the Picture below: What did I do wrong ? Thanks in advance. Josias ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. This 200-page book is written by three acclaimed leaders in the field. The early access version is available now. Download your free book today! http://p.sf.net/sfu/neotech_d2d_may___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Josias Martins Jr 2013-05-10T22:35:27 http://comments.gmane.org/gmane.network.tight-vnc.general/10390 <pre>------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. This 200-page book is written by three acclaimed leaders in the field. The early access version is available now. Download your free book today! http://p.sf.net/sfu/neotech_d2d_may___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Jon Larimore 2013-05-10T19:13:53 http://comments.gmane.org/gmane.network.tight-vnc.general/10385 <pre>Is there any documentation on how to embed the TightVNC Java Viewer into my own application, such as my own JPanel? Thanks, David </pre> David R Robison 2013-04-29T16:41:25 http://comments.gmane.org/gmane.network.tight-vnc.general/10380 <pre>We are running an operator display that's operating Windows CE 6.0, and was provide with TightVNC's VNC Server. We are interested in reducing the data packets that need to be transmitted and so became interested in installing DF Mirage since many of the pixels are not update. So the question is therefore can DF Mirage be installed on a Windows CE 6.0 terminal or is there alternative product we could purchase. Gerrit J Marks Application Solutions Inc. (O) +1(858)952-0809 (C) +1(858)229-9118 (F) +1(858)408-2423 (E) &lt;mailto:gmarks&lt; at &gt;appsolu.com&gt; gmarks&lt; at &gt;appsolu.com (S) gerrit.j.marks ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis &amp; visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Gerrit J Marks 2013-04-19T19:51:44 http://comments.gmane.org/gmane.network.tight-vnc.general/10378 <pre>Greetings, First here's bit of background info: On Monday april 8, 2013 my roomate indicated he think he has a computer virus. On april 11, 2013 I'm at the office connecting from knoppix RDP Terminal Server Client to my winxp box at home as usual when I notice the connection wasn't as fast as I like. This isn't a big deal because sometimes the connection is slow using RDP with Terminal Server Client. So I use VNC with Terminal Server Client. No issues, work as it should. I'm not sure if i disconnected when I was done or not but it didn't matter since when I leave the office it would disconnect. I reconnected my knoppix laptop once I got home later that night wired to my D-link switch, not sure if I use the internet router address or my local private address, using either VNC or RDP. As you all know sometime we fall asleep at the wheel with the engine running..lol..lol. Then on Friday morning april 12, 2013 received a call from microsoft requesting my roommate saying his computer was infected and he could fix it. I went along with him cause of reason maybe the roommate did call microsoft and they were calling him back. I didn't have his computer in front of me so, I thought I would go through part way on my box and understand what the guy was talking about. It go strange when he asked who is may cable provider. I didn't respond to the question because to me it didn't matter. So they want me to check the eventviewer and thats when I lost connection with them and thats when my problems with RDP started . Recalled the number on my phone and it was a (240-xxx-0000). After looking it up online, I find it is a scam. So I need some help from you good people. laptop is knoppix liveDVD I went to reconnect using TSClient with my wired knoppix laptop using the private local address and noticed once I connected and logged-in, the winxp box would show the desktop for a few seconds and the winxp box would reboot resulting in my knoppix laptop system being disconnected. I ran ad-aware and avast. Both software found something that could be removed. This didn't solve the issue, winxp system still reboots upon logging-in using RDP. VNC never presented an issue. Tried Remmina RDP. It worked with it worked with the desktop but the sound didn't work and the drip mapping didn't work I upgraded remmina to the latest experimental version. When I tried to connect from the laptop just enabling the option for hard drive mapping caused the desktop to reboot. I reinstalled the TSClient. It acted like it was going to work but as soon as I attempted to transfer a file the desktop would reboot. I rebooted the knoppix dvd and start over from scratch. I then went into synoptics to reload and allowed the system to get all the most up to date plugins and binaries. After 2hrs of downloading, the system failed to up grade. I then finally got the upgraded remmina to install. first by downloading http://ftp.us.debian.org/debian/pool/main/r/remmina/remmina_1.0.0-4+deb7u1_i386.deb and placing it in the /home/knoppix/.remmina and going to the synaptics and upgrading from there. The RDP was installed with no errors. Set map drive option and test connection all is well. I was able to see the laptop drives but as soon as I attempted to transfer a file from the desktop to the laptop, the desktop reboots. I turn my attention to upgrade TightVNC from 2.0.4 to 2.6 leaving all setting the same. Attempted RDP from laptop to desktop so I can transfer a file. Still the transfer failed although all the rebooting at loging is no longer happening and the sound is workin. Question, how to get file transfer working in RDP with either TSClient or Remmina? Oh and I did reducess the hardware acceleration on the video but it too had no effect. facebook ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis &amp; visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter ___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> computersupport< at >datalogg.com 2013-04-16T01:05:20 http://comments.gmane.org/gmane.network.tight-vnc.general/10377 <pre>Dear "App developer(s)", My name is Shiguang Tim Hao, a student of CCT college in Dublin, Ireland. My colleagues and myself are doing a final year project for our degree course. Which is required a function of --- sending a input(scanned barcode) from a phone(iPhone/Android Phone) to a Android tablet.(Most likely by using VNC) So far, I could only manage to use iPhone as scanner(iPhone app) to scan the barcode and send it to Windows Operating System(by using "TightVNC"), or to Mac OS X(by using "Real VNC"); Which is for instance, open any editor in Windows or OS X, once the barcode is scanned from the phone, the text will transferred to Windows or OS X, and inputed to that editor automatically. ****But, I cannot get any App to display the input from phone to the tablet.*** I think, there should be no problem for establish the VNC connection between those two devices, specially since I have tried most of the free VNC servers in App store on the tablet. By the way, I already managed to rooted the Android tablet, but still the input is not showing. I assuming, there are some other permissions are blocking the input which is sent from VNC client, in my case, from the phone. (Or maybe I need install other packages) I am considering to buy a paid VNC server in the App store, to achieve the function for the tablet. But surely without waste any money of our funding. So, dear App developer(s), if your VNC App in App store has this kind of function, I will be glad to get it and present it to my other friends in the further. Thank you very very much!!!! Also, if there is anything you could think of that may help me to an achieve this task, please let me know, I am much much appreciated!!!! Thank you very very much for your time. Kindly regards Tim(Shiguang) ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis &amp; visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Shiguang Hao 2013-04-15T22:19:00 http://comments.gmane.org/gmane.network.tight-vnc.general/10376 <pre>------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis &amp; visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> computersupport< at >datalogg.com 2013-04-15T21:42:20 http://comments.gmane.org/gmane.network.tight-vnc.general/10375 <pre>I have TightVNC server installed on Windows XP. I can connect to the server from my iPad and Linux fine. The problem is I can not connect from Windows 7. I tried disabling the firewall on Windows 7 with no success. Any suggestions? It seems to be a Windows 7 issue. ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis &amp; visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter ___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Rob Fausey 2013-04-14T14:13:33 http://comments.gmane.org/gmane.network.tight-vnc.general/10368 <pre>Hello all, I require some assistance with TightVNC Server 2.6.4, please. When we try to connect to a PC that no one is logged into, connect after authentication, but it's still necessary to have to accept the incoming request. It appears that we can either shut that feature off so intervention isn't required at all for any instance, or turn it on so it's the complete opposite. Our older XP boxes are running version 1.3.9 and it works as it should. We're running Server/Viewer 2.6.4 on Windows 7 Ent. SP1 Any assistance would be appreciated! Sincerely, JS ------------------------------------------------------------------------------ Own the Future-Intel&amp;reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Jeff Smalley 2013-03-27T15:47:51 http://comments.gmane.org/gmane.network.tight-vnc.general/10367 <pre>I've used tightvnc for years with no problem at all. The ability to copy/cut and paste between server and viewer is amazing and very useful. But, just recently, I installed TVNC 2.6.4 on a new Windows 7 (64 bit) machine. I'm trying to view, also with TVNC with 2.6.4 on a Windows XP machine. The first session, everything was fine. But now, when I start the session, I only see the top left hand corner of the server screen, and the apparent cursor location does not correspond with the actual location. Looking at the connection information, I see a resolution of 1280x720, but the actual resolution of the server's screen is 1920x1080. I tried setting different resolutions on the server's machine via the standard windows controls. The resolution numbers in the VNC connection information dialogue would also change, but they wouldn't match. Seems like it could be a setup issue, but that theory doesn't jibe with the fact that it worked for the first session. The windows 7 machine is 5000 miles away from me and what may have happened between the 1st session and subsequent sessions is something only an omniscient being could disclose. (Example: "Now hit the enter key." Response:"Where's that?") ------------------------------------------------------------------------------ Own the Future-Intel&amp;reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> T A Lenz 2013-03-27T10:12:43 http://comments.gmane.org/gmane.network.tight-vnc.general/10366 <pre> ------------------------------------------------------------------------------ Own the Future-Intel&amp;reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d ___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> T A Lenz 2013-03-27T08:40:42 http://comments.gmane.org/gmane.network.tight-vnc.general/10365 <pre>I'm using TightVNC viewer 2.6.4 (installed without server) on Windows 7, running on a Sony Vaio Z. This laptop uses a different graphics card depending on whether it is attached to its docking station. I'm connecting to the tightvnc 1.3.10-8.1.4 that comes with openSUSE-12.2-1.6, running on a Dell rack server. I haven't changed any of the server's VNC configuration, except to add an additional server command at 5904 for 1920x1200 resolution. It works fantastically well when it is working. But I am having numerous problems connecting. I'm not able to find any web information about these issues, so I'm guessing they are specific to my installation. None of these problems occur with the RealVNC viewer. Here they are: * Using Tight encoding causes an unreadable image. Repainted areas appear as bluish speckled rectangles. Hextile works fine. I've tried turning off various encoding parameters in the client options, with no change. The problems occur with both graphics cards. * I have different server commands on ports 5901, 5902 and 5903 to provide different resolutions, which is the default configuration. The viewer can only connect at 1024x768, on 5901 (:1). Attempts to connect at higher resolutions result in the message "Pseudo encoding &lt;nn...nn&gt; not supported" where &lt;nn...nn&gt; is some number -- very often -128, but sometimes an eight digit number. I changed the server command for :2 to 1024x768 and it then connects properly, so it is the resolution rather than the display number that is the problem. * Once that error occurs once, the viewer will seldom (if ever) connect at all, even at 1024x768. The same error as above is produced. Rebooting Windows 7 clears that problem. When it does connect, as I mentioned, it works very well. However, when disconnecting, it produces one of these messages chosen at random: "Connection gracefully closed by host." "Failed to send data to socket." "Failed to recv data from socket." The "pseudo encoding..." error is the showstopper for me. I would like very much to connect at 1920x1200, my display resolution. I'd be grateful for any new directions; I've been fighting with this issue for several days. Thanks, Derry -- View this message in context: http://tightvnc.10971.n7.nabble.com/TightVNC-on-Windows-2-6-4-numerous-problems-tp3507.html Sent from the VNC Tight List mailing list archive at Nabble.com. ------------------------------------------------------------------------------ Own the Future-Intel&amp;reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d ___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> Derry 2013-03-26T16:47:13 http://comments.gmane.org/gmane.network.tight-vnc.general/10364 <pre>Hi, After installing the Oracle Java plugin on 2 Macbooks (one running 10.7.5 and another running 10.8.x), I'm seeing the following screen distortion on top of the applet when inserted in a web page : &lt;http://tightvnc.10971.n7.nabble.com/file/n3504/vnc-viewer-distored-java-plugin.png&gt; (https://dl.dropbox.com/u/13246619/IntelAmt/vnc-viewer-distored-java-plugin.png) This issue started occurring on Mac OS X system that don't have the Apple provided Java Plugin anymore. The same Oracle Java Plugin version on Windows doesn't seem to experience this issue. Any ideas ? Is this a known issue and is there a way to fix this ? -- View this message in context: http://tightvnc.10971.n7.nabble.com/Applet-screen-distortion-on-Mac-OS-X-with-Oracle-Java-Plugin-tp3504.html Sent from the VNC Tight List mailing list archive at Nabble.com. ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_mar ___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> ddewaele 2013-03-22T18:22:05 http://comments.gmane.org/gmane.network.tight-vnc.general/10363 <pre>I apologize if this has been answered, but I have searched and cannot find it! I have installed the latest version 2.6.4 on all of my systems (this problem started with previous version update) my systems are running Windows 8 Pro &amp; one Server 2012. When I go to full screen mode and screen resolution is larger than viewing screen, on all systems, I have side &amp; bottom scroll bars, where-as before the screen would auto-scroll as I moved the mouse around. I read on the website that auto-scroll is still an option, but I cannot find where I enable the option. Please, if anyone can give me some direction/instruction it would be much appreciated! And, again, I apologize if this is something covered previously. Robert E. Ward Robert E. Ward President 816 Blanton Ave. Richmond, VA 23221 804.340.1288 phone 804.340.1289 fax 804.402.4250 mobile www.matryxsystems.com &lt;http://www.matryxsystems.com/&gt; ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_mar___________________________________________________________ TightVNC mailing list, VNC-Tight-list&lt; at &gt;lists.sourceforge.net To change your subscription or to UNSUBSCRIBE, please visit https://lists.sourceforge.net/lists/listinfo/vnc-tight-list </pre> REWard 2013-03-20T16:42:20 Search the mailing list at Gmane query http://search.gmane.org/?group=$group=gmane.network.tight-vnc.general