gmane.linux.network.networkmanager.devel
http://blog.gmane.org/gmane.linux.network.networkmanager.devel
hourly11901-01-01T00:00+00:00Gmanehttp://gmane.org/img/gmane-25t.png
http://gmane.org
OPENVPN on VPS with ascii schema
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21221
<pre>Dears,
I need your help to set up a VPN on a VPS server.
I have this ifconfig:
root< at >akylez:/etc/openvpn# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1176 (1.1 KB) TX bytes:1176 (1.1 KB)
venet0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:127.0.0.2 P-t-P:127.0.0.2 Bcast:0.0.0.0
Mask:255.255.255.255
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:3342590 errors:0 dropped:0 overruns:0 frame:0
TX packets:15174216 errors:0 dropped:8 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:305438458 (305.4 MB) TX bytes:1578969381 (1.5 GB)
venet0:0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:31.210.100.100 P-t-P:31.21.10.10 Bcast:0.0.0.0
Mask:255.255.255.0
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
I would love to set up a network like this:
computer1-ip:10.1.1.2=====>|
computer2-ip:10.1.1.3=====>|VPS(VPN--ip:10.1.1.1)====>|Internet(
31.210.100.100)
computer9-ip:10.1.1.4====>|
to computer1 on http://www.whatismyip.com/ will be: 31.210.100.100
to computer2 on http://www.whatismyip.com/ will be: 31.210.100.100
to computer9 on http://www.whatismyip.com/ will be: 31.210.100.100
(sorry my last e-mail, since the image was not in ascii)
To do this I have:
A VPS server with ubuntu 11.04
OpenVPN installed.
My certificates are working.
my keys are working.
But I can not get the server settings.
I've tried several examples in support of the VPN, but can not adapt them to my
reality.
How that could make the OpenVPN configuration? (server.conf)
I've tried various way, and I can not make functional changes.
have this type of configuration, but can anyone help me?
the openvpn site, there is an example configuration file for server and
client:
server:
*#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
# This file is for the server side #
# of a many-clients one-server #
# OpenVPN configuration. #
# #
# OpenVPN also supports #
# single-machine single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
# #
# Comments are preceded with '#' or ';' #
#################################################
# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d
# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port 1194
# TCP or UDP server?
;proto tcp
proto udp
# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap
# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca ca.crt
cert server.crt
key server.key # This file should be kept secret
# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh1024.pem 1024
# Substitute 2048 for 1024 if you are using
# 2048 bit keys.
dh dh1024.pem
# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0
# Maintain a record of client virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt
# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"
# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).
# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.
# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2
# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script
# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# the TUN/TAP interface to the internet in
# order for this to work properly).
# CAVEAT: May break client's network config if
# client's local DHCP server packets get routed
# through the tunnel. Solution: make sure
# client's local DHCP server is reachable via
# a more specific route than the default route
# of 0.0.0.0/0.0.0.0.
;push "redirect-gateway"
# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
;push "dhcp-option DNS 10.8.0.1"
;push "dhcp-option WINS 10.8.0.1"
# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client
# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn
# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120
# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
# openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
;tls-auth ta.key 0 # This file is secret
# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
;cipher BF-CBC # Blowfish (default)
;cipher AES-128-CBC # AES
;cipher DES-EDE3-CBC # Triple-DES
# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo
# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100
# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
;user nobody
;group nobody
# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun
# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log
# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
;log openvpn.log
;log-append openvpn.log
# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3
# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20*
Client:
*##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
##############################################
# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client
# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap
# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp
# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote my-server-1 1194
;remote my-server-2 1194
# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random
# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite
# Most clients don't need to bind to
# a specific local port number.
nobind
# Downgrade privileges after initialization (non-Windows only)
;user nobody
;group nobody
# Try to preserve some state across restarts.
persist-key
persist-tun
# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings
# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ca.crt
cert client.crt
key client.key
# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server". This is an
# important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server". The build-key-server
# script in the easy-rsa folder will do this.
;ns-cert-type server
# If a tls-auth key is used on the server
# then every client must also have the key.
;tls-auth ta.key 1
# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x
# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo
# Set log file verbosity.
verb 3
# Silence repeating messages
;mute 20
*
_______________________________________________
networkmanager-list mailing list
networkmanager-list< at >gnome.org
https://mail.gnome.org/mailman/listinfo/networkmanager-list
</pre>Gustavo2012-05-26T12:50:31OPENVPN on VPS
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21220
<pre>Dears,
I need your help to set up a VPN on a VPS server.
I have this ifconfig:
root< at >akylez:/etc/openvpn# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1176 (1.1 KB) TX bytes:1176 (1.1 KB)
venet0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:127.0.0.2 P-t-P:127.0.0.2 Bcast:0.0.0.0
Mask:255.255.255.255
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:3342590 errors:0 dropped:0 overruns:0 frame:0
TX packets:15174216 errors:0 dropped:8 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:305438458 (305.4 MB) TX bytes:1578969381 (1.5 GB)
venet0:0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:31.210.100.100 P-t-P:31.21.10.10 Bcast:0.0.0.0
Mask:255.255.255.0
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
I would love to set up a network like this:
[image: Imagem inline 1]
To do this I have:
A VPS server with ubuntu 11.04
OpenVPN installed.
My certificates are working.
my keys are working.
But I can not get the server settings.
I've tried several examples in support of the VPN, but can not adapt them to my
reality.
How that could make the OpenVPN configuration? (server.conf)
I've tried various way, and I can not make functional changes.
have this type of configuration, but can anyone help me?
the openvpn site, there is an example configuration file for server and
client:
server:
*#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
# This file is for the server side #
# of a many-clients one-server #
# OpenVPN configuration. #
# #
# OpenVPN also supports #
# single-machine single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
# #
# Comments are preceded with '#' or ';' #
#################################################
# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d
# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port 1194
# TCP or UDP server?
;proto tcp
proto udp
# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap
# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca ca.crt
cert server.crt
key server.key # This file should be kept secret
# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh1024.pem 1024
# Substitute 2048 for 1024 if you are using
# 2048 bit keys.
dh dh1024.pem
# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0
# Maintain a record of client virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt
# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"
# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).
# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.
# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2
# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script
# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# the TUN/TAP interface to the internet in
# order for this to work properly).
# CAVEAT: May break client's network config if
# client's local DHCP server packets get routed
# through the tunnel. Solution: make sure
# client's local DHCP server is reachable via
# a more specific route than the default route
# of 0.0.0.0/0.0.0.0.
;push "redirect-gateway"
# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
;push "dhcp-option DNS 10.8.0.1"
;push "dhcp-option WINS 10.8.0.1"
# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client
# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn
# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120
# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
# openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
;tls-auth ta.key 0 # This file is secret
# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
;cipher BF-CBC # Blowfish (default)
;cipher AES-128-CBC # AES
;cipher DES-EDE3-CBC # Triple-DES
# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo
# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100
# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
;user nobody
;group nobody
# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun
# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log
# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
;log openvpn.log
;log-append openvpn.log
# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3
# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20*
Client:
*##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
##############################################
# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client
# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap
# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp
# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote my-server-1 1194
;remote my-server-2 1194
# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random
# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite
# Most clients don't need to bind to
# a specific local port number.
nobind
# Downgrade privileges after initialization (non-Windows only)
;user nobody
;group nobody
# Try to preserve some state across restarts.
persist-key
persist-tun
# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings
# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ca.crt
cert client.crt
key client.key
# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server". This is an
# important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server". The build-key-server
# script in the easy-rsa folder will do this.
;ns-cert-type server
# If a tls-auth key is used on the server
# then every client must also have the key.
;tls-auth ta.key 1
# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x
# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo
# Set log file verbosity.
verb 3
# Silence repeating messages
;mute 20
*
_______________________________________________
networkmanager-list mailing list
networkmanager-list< at >gnome.org
https://mail.gnome.org/mailman/listinfo/networkmanager-list
</pre>Gustavo2012-05-26T12:28:27NM vlan config documentation ?
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21217
<pre>Hello all,
I would like to use some VLAN configuration with my NM 0.9.4.
However, it seems like the graphical interfaces do not support vlan
config yet. So we have to do it in /etc/NetworkManager ?
Looking around on NM site and wiki, and the list archives, I did not
find any Doc about how to configure VLAN connections.
I even tried to look in the source, but I'm not an expert.
Could you provide a sample config for VLAN config ? or I have to do it
with dbus with some commands ?
Thanks in advance,
and for your work on NM!
Marc
</pre>Marc MAURICE2012-05-24T12:36:03Strange issues in debian testing, no idea what's going on
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21214
<pre>
Hi,
On my debian testing (i486) I run into issue with my modem + recent 0.5.2 MM + kernel 3.2.0-2-486
Modem stopped working, so, I made two logs using modem-manager.
1st case: cannot use the modem, even cannot see in devices list etc.: modem-manager.connection-lost.log
2nd case: I pull out the modem and plug back after some seconds, it get known, tried to connect but dropped the connection immediately. modem-manager.connection-lost_new_plug.log
3rd case: reboot, working well.
The attached messages.log contains the end of the 2nd case and a normal operation (boot, activated, everything working well at this moment).
In fact, I have no idea, what is going on and why these things happen. I did not see any segfault. Even, last night it was working all the night, but in the morning I had several issues.
It is possible, the weather is not so good here nowadays, probably the mobile service provider kicks out from the network, I do not know.
Could somebody check the logs, maybe you have more experiences.
Thank you!
IStván
<info> [1337773534.332130] [main.c:167] main(): ModemManager (version 0.5.2.0) starting...
<info> [1337773535.136193] [mm-manager.c:120] load_plugin(): Loaded plugin ZTE
<info> [1337773535.157170] [mm-manager.c:120] load_plugin(): Loaded plugin Gobi
<info> [1337773535.168162] [mm-manager.c:120] load_plugin(): Loaded plugin X22X
<info> [1337773535.181725] [mm-manager.c:120] load_plugin(): Loaded plugin Novatel
<info> [1337773535.193928] [mm-manager.c:120] load_plugin(): Loaded plugin Sierra
<info> [1337773535.205966] [mm-manager.c:120] load_plugin(): Loaded plugin Option
<info> [1337773535.216908] [mm-manager.c:120] load_plugin(): Loaded plugin Huawei
<info> [1337773535.231988] [mm-manager.c:120] load_plugin(): Loaded plugin MotoC
<info> [1337773535.242999] [mm-manager.c:120] load_plugin(): Loaded plugin AnyData
<info> [1337773535.256385] [mm-manager.c:120] load_plugin(): Loaded plugin Linktop
<info> [1337773535.267157] [mm-manager.c:120] load_plugin(): Loaded plugin Option High-Speed
<info> [1337773535.280797] [mm-manager.c:120] load_plugin(): Loaded plugin Generic
<info> [1337773535.293368] [mm-manager.c:120] load_plugin(): Loaded plugin Nokia
<info> [1337773535.305709] [mm-manager.c:120] load_plugin(): Loaded plugin Ericsson MBM
<info> [1337773535.316779] [mm-manager.c:120] load_plugin(): Loaded plugin Longcheer
<info> [1337773535.331753] [mm-manager.c:120] load_plugin(): Loaded plugin Samsung
<info> [1337773535.343101] [mm-manager.c:120] load_plugin(): Loaded plugin Wavecom
<info> [1337773535.356869] [mm-manager.c:120] load_plugin(): Loaded plugin SimTech
<debug> [1337773535.420155] [mm-manager.c:809] device_added(): (tty/ttyS0): port's parent platform driver is not whitelisted
<debug> [1337773535.433230] [mm-manager.c:809] device_added(): (tty/ttyS1): port's parent platform driver is not whitelisted
<debug> [1337773535.445574] [mm-manager.c:809] device_added(): (tty/ttyS2): port's parent platform driver is not whitelisted
<debug> [1337773535.457176] [mm-manager.c:809] device_added(): (tty/ttyS3): port's parent platform driver is not whitelisted
<info> [1337773535.490697] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773535.511986] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773535.521997] [mm-plugin-base.c:859] try_open(): (ttyUSB0): probe requested by plugin 'ZTE'
<info> [1337773535.534469] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773535.545086] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773535.557244] [mm-plugin-base.c:859] try_open(): (ttyUSB1): probe requested by plugin 'ZTE'
<info> [1337773535.568595] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773535.581319] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773535.590496] [mm-plugin-base.c:859] try_open(): (ttyUSB2): probe requested by plugin 'ZTE'
<debug> [1337773535.639960] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773535.676131] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773535.711254] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773536.734850] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773536.747539] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+GCAP<CR>'
<debug> [1337773536.779409] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773536.790237] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GCAP<CR>'
<debug> [1337773537.489255] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773537.505838] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB1) device open count is 0 (close)
<info> [1337773539.399267] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB1) closing serial port...
<info> [1337773539.426643] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB1) serial port closed
<debug> [1337773539.571347] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB1) type secondary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info> [1337773539.795639] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB1
<debug> [1337773539.804533] [mm-manager.c:317] add_modem(): Added modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773539.814057] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773539.826102] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773539.835686] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773539.848248] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info> [1337773539.857323] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info> [1337773539.868614] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773539.884302] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB2) type primary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info> [1337773539.894529] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773539.906195] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773539.918049] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773539.927266] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 3 (open)
<info> [1337773539.950652] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB2
<debug> [1337773539.960133] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773539.970484] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773540.002484] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773540.341022] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMI<CR>'
<debug> [1337773540.350517] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773540.392040] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773540.721146] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMM<CR>'
<debug> [1337773540.762380] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773541.190624] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMR<CR>'
<debug> [1337773541.243975] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773541.563843] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMI<CR>'
<debug> [1337773541.626947] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773541.934543] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMM<CR>'
<debug> [1337773541.995176] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773542.302684] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMR<CR>'
<debug> [1337773542.355702] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773542.671901] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI<CR>'
<debug> [1337773542.715144] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773543.059514] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI1<CR>'
<debug> [1337773543.778736] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773543.802197] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GSN<CR>'
<debug> [1337773543.862503] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773543.874542] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGSN<CR>'
<debug> [1337773543.950214] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773543.962166] [mm-modem-helpers.c:920] mm_create_device_identifier(): Device ID source '000019d200000117Manufacturer:ZTEINCORPORATEDModel:MF668ARevision:BD_MF668AV1.0.1B02IMEI:864851005185039+GCAP:+CGSM,+FCLASS,+DS864851005185039BD_MF668AV1.0.1B02MF668AZTEINCORPORATED'
<debug> [1337773543.973275] [mm-modem-helpers.c:921] mm_create_device_identifier(): Device ID 'b735f6159cf589e85f8a66cfff7b0bd4eea1a73a'
<debug> [1337773543.982603] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 2 (close)
<debug> [1337773543.992216] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773544.038260] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773544.048762] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773544.059481] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMEE=1<CR>'
<debug> [1337773544.142524] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773544.155010] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPIN?<CR>'
<debug> [1337773544.231146] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPIN: READY<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773544.240849] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773544.250372] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773544.262606] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CRSM=176,12258,0,0,10<CR>'
<debug> [1337773544.827472] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CRSM: 144,0,"986302003053001571F2"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773544.838623] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info> [1337773544.848121] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info> [1337773544.860238] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773544.871586] [mm-generic-gsm.c:507] get_iccid_done(): SIM ID source '8936200003350051172'
<debug> [1337773544.880645] [mm-generic-gsm.c:508] get_iccid_done(): SIM ID '77ac780d92e5c18295a5d48747eaa490ab1b8473'
<debug> [1337773544.890488] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773547.151968] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773552.156471] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773556.148942] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773560.149383] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773564.154098] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773568.150344] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773570.759048] [mm-serial-port.c:636] data_available(): (ttyUSB0) unexpected port hangup!
<debug> [1337773571.569620] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info> [1337773571.620216] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info> [1337773571.629584] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
mm_serial_port_close: assertion `priv->open_count > 0' failed<info> [1337773571.658086] [mm-manager.c:862] device_removed(): (tty/ttyUSB1): released by modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773571.697520] [mm-modem-base.c:185] mm_modem_base_remove_port(): (ttyUSB1) type secondary removed from /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info> [1337773571.721814] [mm-manager.c:862] device_removed(): (tty/ttyUSB2): released by modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773571.745818] [mm-modem-base.c:185] mm_modem_base_remove_port(): (ttyUSB2) type primary removed from /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773571.757021] [mm-manager.c:204] remove_modem(): Removed modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
marshal_object: assertion `g_variant_is_object_path (path)' failedfailed to marshal parameter 1 for signal DeviceRemoved<info> [1337773593.603675] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773595.166112] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773596.380467] [mm-plugin-base.c:859] try_open(): (ttyUSB1): probe requested by plugin 'ZTE'
<info> [1337773596.441247] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773596.798584] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773596.812503] [mm-plugin-base.c:859] try_open(): (ttyUSB0): probe requested by plugin 'ZTE'
<info> [1337773596.827215] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773596.842199] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773596.854463] [mm-plugin-base.c:859] try_open(): (ttyUSB2): probe requested by plugin 'ZTE'
<debug> [1337773596.868625] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773596.929885] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773596.970087] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773597.924967] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773597.938927] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+GCAP<CR>'
<debug> [1337773598.032484] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773598.046164] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GCAP<CR>'
<debug> [1337773598.683251] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773598.695905] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB1) device open count is 0 (close)
<info> [1337773598.706381] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB1) closing serial port...
<info> [1337773598.722352] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB1) serial port closed
<debug> [1337773598.811486] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB1) type secondary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info> [1337773598.833879] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB1
<debug> [1337773598.847680] [mm-manager.c:317] add_modem(): Added modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773598.859674] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773598.869863] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773598.896390] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773598.910120] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info> [1337773598.920467] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info> [1337773598.931240] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773598.954872] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB2) type primary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info> [1337773598.967896] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773598.981707] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773598.991594] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773599.343825] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 3 (open)
<info> [1337773599.353955] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB2
<debug> [1337773599.363049] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773599.372504] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773599.403050] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773599.412735] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMI<CR>'
<debug> [1337773599.453321] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.462991] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMM<CR>'
<debug> [1337773599.500587] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.512008] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMR<CR>'
<debug> [1337773599.552866] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.562598] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMI<CR>'
<debug> [1337773599.624654] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.634427] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMM<CR>'
<debug> [1337773599.680866] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.690659] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMR<CR>'
<debug> [1337773599.736816] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.747996] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI<CR>'
<debug> [1337773599.780616] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.790477] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI1<CR>'
<debug> [1337773599.824035] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.836354] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GSN<CR>'
<debug> [1337773599.880500] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.890745] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGSN<CR>'
<debug> [1337773599.936900] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773599.947381] [mm-modem-helpers.c:920] mm_create_device_identifier(): Device ID source '000019d200000117Manufacturer:ZTEINCORPORATEDModel:MF668ARevision:BD_MF668AV1.0.1B02IMEI:864851005185039+GCAP:+CGSM,+FCLASS,+DS864851005185039BD_MF668AV1.0.1B02MF668AZTEINCORPORATED'
<debug> [1337773599.958097] [mm-modem-helpers.c:921] mm_create_device_identifier(): Device ID 'b735f6159cf589e85f8a66cfff7b0bd4eea1a73a'
<debug> [1337773599.969401] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 2 (close)
<debug> [1337773599.978578] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773600.007298] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773600.020371] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773600.030317] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMEE=1<CR>'
<debug> [1337773600.082820] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773600.092876] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPIN?<CR>'
<debug> [1337773600.143625] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPIN: READY<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773600.167074] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773600.176319] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773600.186083] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CRSM=176,12258,0,0,10<CR>'
<debug> [1337773600.650810] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CRSM: 144,0,"986302003053001571F2"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773600.660999] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info> [1337773600.671973] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info> [1337773600.684097] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773600.695333] [mm-generic-gsm.c:507] get_iccid_done(): SIM ID source '8936200003350051172'
<debug> [1337773600.706589] [mm-generic-gsm.c:508] get_iccid_done(): SIM ID '77ac780d92e5c18295a5d48747eaa490ab1b8473'
<debug> [1337773600.716169] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773601.149906] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773605.150303] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773609.150739] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773613.151180] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773619.151842] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773623.152422] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773627.152855] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773631.149165] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info> [1337773631.166177] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info> [1337773631.193439] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
<info> [1337773631.207643] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773631.219427] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773631.231061] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): --> 00 78 f0 7e
<debug> [1337773634.149487] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): --> 00 78 f0 7e
<debug> [1337773634.174466] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): <-- 00 4d 61 72 20 32 39 20 32 30 31 31 31 39 3a 31 39 3a 30 35 4d 61 72 20 32 39 20 32 30 31 31 31 39 3a 31 39 3a 30 35 4d 46 36 36 38 41 4d 31 00 00 08 00 00 00 04 e0 87 b4 7e
<debug> [1337773634.186671] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info> [1337773634.196594] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info> [1337773634.207091] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
<debug> [1337773634.222657] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB0) type QCDM claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info> [1337773634.235710] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB0
<debug> [1337773634.247888] [mm-manager.c:265] check_export_modem(): Exported modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 as /org/freedesktop/ModemManager/Modems/0
<debug> [1337773634.257646] [mm-manager.c:278] check_export_modem(): (/org/freedesktop/ModemManager/Modems/0): VID 0x19D2 PID 0x0117 (usb)
<debug> [1337773634.268799] [mm-manager.c:279] check_export_modem(): (/org/freedesktop/ModemManager/Modems/0): data port is ttyUSB2
<info> [1337773640.775896] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773641.893327] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<info> [1337773641.904280] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (disabled -> enabling)
<debug> [1337773642.018993] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0 V1<CR>'
<debug> [1337773642.064612] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773642.075454] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT%IPSYS?<CR>'
<debug> [1337773642.128495] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ERROR<CR><LF>'
<debug> [1337773642.138131] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 100: Unknown error
<debug> [1337773642.149391] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATZ E0 V1 X4 &C1 +CMEE=1;+CFUN=1;<CR>'
<debug> [1337773642.298726] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773642.309200] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773642.349565] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773642.359537] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPMS?<CR>'
<debug> [1337773642.406263] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<info> [1337773642.418515] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773642.430046] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773642.439858] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+IFC=1,1<CR>'
<debug> [1337773642.500501] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773642.511341] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPMS="ME","ME","ME"<CR>'
<debug> [1337773642.623317] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: 2,100,2,100,2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773642.633237] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CNMI=2,1,2,1,0<CR>'
<debug> [1337773642.728853] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CMS ERROR: 303<CR><LF>'
<debug> [1337773642.742446] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 303: Operation not supported
<debug> [1337773642.754604] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMGF=?<CR>'
<debug> [1337773642.809617] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CMGF: (0-1)<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773642.821043] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CUSD=1<CR>'
<debug> [1337773642.872574] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773642.886235] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND=?<CR>'
<debug> [1337773642.938037] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: ("battchg",(0-5)),("signal",(0-5)),("service",(0-1)),("call",(0-1)),("roam",(0-1)),("smsfull",(0-1)),("GPRS coverage",(0-1)),("callsetup",(0-3))<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773642.951405] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZSNT?<CR>'
<debug> [1337773643.006098] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZSNT: 0,0,1<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773643.018522] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS=?<CR>'
<debug> [1337773643.076816] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CSCS: ("IRA","GSM","UCS2")<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773643.088298] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMGF=1<CR>'
<debug> [1337773643.144533] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<info> [1337773643.158158] [mm-generic-gsm.c:1704] sms_set_format_cb(): (ttyUSB2): using text mode for SMS
<debug> [1337773643.171007] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMER=3,0,0,1<CR>'
<debug> [1337773643.249741] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773643.261751] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CMER=3,0,0,1<CR>'
<debug> [1337773643.273726] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS="UCS2"<CR>'
<debug> [1337773643.348958] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773643.360981] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773643.380451] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS?<CR>'
<debug> [1337773643.436546] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CSCS: "UCS2"<CR><LF><CR><LF>OK<CR><LF>'
<info> [1337773643.451985] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabling -> enabled)
<debug> [1337773643.465814] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG=2<CR>'
<debug> [1337773643.924751] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): number => "*99#"
<debug> [1337773643.947388] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): network_mode => 5
<debug> [1337773643.960909] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): apn => "net"
<debug> [1337773643.970788] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): allowed_mode => 1
<debug> [1337773643.983852] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): allowed_auth => 63
<debug> [1337773644.006507] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 0
<debug> [1337773644.021398] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 2
<debug> [1337773644.065958] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.084960] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773644.134694] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.154797] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773644.210641] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.223500] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZSNT=0,0,1<CR>'
<debug> [1337773644.306884] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.319073] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG?<CR>'
<debug> [1337773644.335930] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 3
<debug> [1337773644.389780] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.399847] [mm-generic-gsm.c:3007] mm_generic_gsm_set_reg_status(): CS registration state changed: 1
<info> [1337773644.413618] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabled -> registered)
<debug> [1337773644.425540] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG=2<CR>'
<debug> [1337773644.485696] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.495980] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CREG=2<CR>'
<debug> [1337773644.507835] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=0,,<CR>'
<debug> [1337773644.553050] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.563955] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CGREG=2<CR>'
<debug> [1337773644.597734] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.613773] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,2;+COPS?<CR>'
<debug> [1337773644.656319] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773644.729313] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,2,"21601",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.740398] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,0;+COPS?<CR>'
<debug> [1337773644.834071] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,0,"Telenor HU",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.847527] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773644.897602] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.908190] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZPAS?<CR>'
<debug> [1337773644.970196] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZPAS: "EDGE","CS_PS"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773644.984187] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG?<CR>'
<debug> [1337773645.037903] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.047776] [mm-generic-gsm.c:3007] mm_generic_gsm_set_reg_status(): PS registration state changed: 1
<debug> [1337773645.061169] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG?<CR>'
<debug> [1337773645.109630] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.121987] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG?<CR>'
<debug> [1337773645.177338] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.525779] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 4
<debug> [1337773645.535415] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,2;+COPS?<CR>'
<debug> [1337773645.634652] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,2,"21601",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.644466] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,0;+COPS?<CR>'
<debug> [1337773645.749760] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,0,"Telenor HU",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.761981] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773645.815709] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.826487] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZPAS?<CR>'
<debug> [1337773645.874498] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZPAS: "EDGE","CS_PS"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.884869] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGDCONT?<CR>'
<debug> [1337773645.953761] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGDCONT: 1,"IP","net","",0,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773645.965800] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 5
<info> [1337773645.975889] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (registered -> connecting)
<debug> [1337773645.985954] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATD*99***1#<CR>'
<debug> [1337773646.054839] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>CONNECT 28000000<CR><LF>'
<debug> [1337773646.065198] [mm-port.c:181] mm_port_set_connected(): (ttyUSB2): port now connected
<info> [1337773646.076728] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (connecting -> connected)
<debug> [1337773646.086689] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 6
<debug> [1337773646.479041] [mm-manager.c:793] device_added(): (net/ppp0): could not get port's parent device
<debug> [1337773650.893267] [mm-serial-port.c:636] data_available(): (ttyUSB1) unexpected port hangup!
<debug> [1337773653.216816] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB1) device open count is 0 (close)
<info> [1337773654.067517] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB1) closing serial port...
<info> [1337773654.079909] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB1) serial port closed
<info> [1337773654.104295] [mm-manager.c:862] device_removed(): (tty/ttyUSB0): released by modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773654.118549] [mm-modem-base.c:185] mm_modem_base_remove_port(): (ttyUSB0) type QCDM removed from /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773654.128234] [mm-serial-port.c:636] data_available(): (ttyUSB2) unexpected port hangup!
<debug> [1337773654.138995] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info> [1337773654.150100] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<debug> [1337773654.159361] [mm-port.c:181] mm_port_set_connected(): (ttyUSB2): port now disconnected
<info> [1337773654.169036] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<info> [1337773654.183997] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (connected -> disconnecting)
<info> [1337773654.208324] [mm-manager.c:862] device_removed(): (tty/ttyUSB1): released by modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773654.219633] [mm-modem-base.c:185] mm_modem_base_remove_port(): (ttyUSB1) type secondary removed from /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info> [1337773654.256186] [mm-manager.c:862] device_removed(): (tty/ttyUSB2): released by modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773654.274332] [mm-modem-base.c:185] mm_modem_base_remove_port(): (ttyUSB2) type primary removed from /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info> [1337773654.286176] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (disconnecting -> disabled)
<debug> [1337773654.297247] [mm-manager.c:204] remove_modem(): Removed modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info> [1337773667.463966] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773669.028285] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773670.261752] [mm-plugin-base.c:859] try_open(): (ttyUSB1): probe requested by plugin 'ZTE'
<info> [1337773670.317398] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773670.329979] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773670.341162] [mm-plugin-base.c:859] try_open(): (ttyUSB0): probe requested by plugin 'ZTE'
<info> [1337773670.351037] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773670.362583] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773670.374496] [mm-plugin-base.c:859] try_open(): (ttyUSB2): probe requested by plugin 'ZTE'
<debug> [1337773670.389172] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773670.454213] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773670.494130] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773671.444968] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773671.456287] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+GCAP<CR>'
<debug> [1337773671.551633] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: "ME",2,100,"ME",2,100,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773671.561557] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GCAP<CR>'
<debug> [1337773672.199424] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773672.551770] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB1) device open count is 0 (close)
<info> [1337773672.562857] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB1) closing serial port...
<info> [1337773672.574634] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB1) serial port closed
<debug> [1337773672.679071] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773672.709444] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB1) type secondary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info> [1337773672.721678] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB1
<debug> [1337773672.732568] [mm-manager.c:317] add_modem(): Added modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773672.754694] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773672.765688] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773672.777843] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info> [1337773672.787169] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info> [1337773672.797758] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773672.812639] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB2) type primary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<info> [1337773672.823862] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773672.836354] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773672.846072] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773672.857598] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 3 (open)
<info> [1337773672.871669] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3 claimed port ttyUSB2
<debug> [1337773672.887742] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773672.898709] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773672.927146] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773672.937228] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMI<CR>'
<debug> [1337773672.981753] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773672.991886] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMM<CR>'
<debug> [1337773673.032560] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.042482] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMR<CR>'
<debug> [1337773673.084650] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.096636] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMI<CR>'
<debug> [1337773673.144872] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.155072] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMM<CR>'
<debug> [1337773673.204789] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.214923] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMR<CR>'
<debug> [1337773673.260765] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.270667] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI<CR>'
<debug> [1337773673.304734] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.316377] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI1<CR>'
<debug> [1337773673.348592] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.358822] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GSN<CR>'
<debug> [1337773673.412812] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.423111] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGSN<CR>'
<debug> [1337773673.472823] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.483080] [mm-modem-helpers.c:920] mm_create_device_identifier(): Device ID source '000019d200000117Manufacturer:ZTEINCORPORATEDModel:MF668ARevision:BD_MF668AV1.0.1B02IMEI:864851005185039+GCAP:+CGSM,+FCLASS,+DS864851005185039BD_MF668AV1.0.1B02MF668AZTEINCORPORATED'
<debug> [1337773673.495136] [mm-modem-helpers.c:921] mm_create_device_identifier(): Device ID 'b735f6159cf589e85f8a66cfff7b0bd4eea1a73a'
<debug> [1337773673.506233] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 2 (close)
<debug> [1337773673.516794] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773673.543608] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773673.558683] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773673.568071] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMEE=1<CR>'
<debug> [1337773673.622935] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773673.634154] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPIN?<CR>'
<debug> [1337773673.687646] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPIN: READY<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773673.697520] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773673.707460] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773673.721857] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CRSM=176,12258,0,0,10<CR>'
<debug> [1337773674.187583] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CRSM: 144,0,"986302003053001571F2"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773674.198803] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info> [1337773674.208568] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info> [1337773674.220572] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773674.232050] [mm-generic-gsm.c:507] get_iccid_done(): SIM ID source '8936200003350051172'
<debug> [1337773674.241328] [mm-generic-gsm.c:508] get_iccid_done(): SIM ID '77ac780d92e5c18295a5d48747eaa490ab1b8473'
<debug> [1337773674.251387] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
<debug> [1337773675.150065] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773679.150457] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773683.150935] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<info> [1337773688.560038] [main.c:41] mm_signal_handler(): Caught signal 2, shutting down...
<debug> [1337773688.915612] [mm-manager.c:204] remove_modem(): Removed modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.3
marshal_object: assertion `g_variant_is_object_path (path)' failedfailed to marshal parameter 1 for signal DeviceRemoved<debug> [1337773688.931450] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info> [1337773688.943001] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info> [1337773688.957462] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
<info> [1337773740.722483] [main.c:167] main(): ModemManager (version 0.5.2.0) starting...
<info> [1337773741.567195] [mm-manager.c:120] load_plugin(): Loaded plugin ZTE
<info> [1337773741.600272] [mm-manager.c:120] load_plugin(): Loaded plugin Gobi
<info> [1337773741.614259] [mm-manager.c:120] load_plugin(): Loaded plugin X22X
<info> [1337773741.626365] [mm-manager.c:120] load_plugin(): Loaded plugin Novatel
<info> [1337773741.639401] [mm-manager.c:120] load_plugin(): Loaded plugin Sierra
<info> [1337773741.650522] [mm-manager.c:120] load_plugin(): Loaded plugin Option
<info> [1337773741.663114] [mm-manager.c:120] load_plugin(): Loaded plugin Huawei
<info> [1337773741.676437] [mm-manager.c:120] load_plugin(): Loaded plugin MotoC
<info> [1337773741.688010] [mm-manager.c:120] load_plugin(): Loaded plugin AnyData
<info> [1337773741.698891] [mm-manager.c:120] load_plugin(): Loaded plugin Linktop
<info> [1337773741.713284] [mm-manager.c:120] load_plugin(): Loaded plugin Option High-Speed
<info> [1337773741.725311] [mm-manager.c:120] load_plugin(): Loaded plugin Generic
<info> [1337773741.738436] [mm-manager.c:120] load_plugin(): Loaded plugin Nokia
<info> [1337773741.749382] [mm-manager.c:120] load_plugin(): Loaded plugin Ericsson MBM
<info> [1337773741.762308] [mm-manager.c:120] load_plugin(): Loaded plugin Longcheer
<info> [1337773742.109172] [mm-manager.c:120] load_plugin(): Loaded plugin Samsung
<info> [1337773742.119382] [mm-manager.c:120] load_plugin(): Loaded plugin Wavecom
<info> [1337773742.130616] [mm-manager.c:120] load_plugin(): Loaded plugin SimTech
<debug> [1337773742.159294] [mm-manager.c:809] device_added(): (tty/ttyS0): port's parent platform driver is not whitelisted
<debug> [1337773742.171122] [mm-manager.c:809] device_added(): (tty/ttyS1): port's parent platform driver is not whitelisted
<debug> [1337773742.198060] [mm-manager.c:809] device_added(): (tty/ttyS2): port's parent platform driver is not whitelisted
<debug> [1337773742.208555] [mm-manager.c:809] device_added(): (tty/ttyS3): port's parent platform driver is not whitelisted
<info> [1337773760.830035] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773763.433703] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773764.182846] [mm-plugin-base.c:859] try_open(): (ttyUSB1): probe requested by plugin 'ZTE'
<info> [1337773764.223361] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773764.234273] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773764.245996] [mm-plugin-base.c:859] try_open(): (ttyUSB0): probe requested by plugin 'ZTE'
<info> [1337773764.255534] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773764.269223] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773764.278576] [mm-plugin-base.c:859] try_open(): (ttyUSB2): probe requested by plugin 'ZTE'
<debug> [1337773764.307023] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773765.331240] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- 'ATE0+CPMS?'
<debug> [1337773765.355832] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773765.365174] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773765.382092] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773765.391752] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773765.402087] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773766.444618] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773766.455202] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773766.466507] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773766.477723] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773766.490829] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773766.499963] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773767.532861] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773767.545112] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773767.556394] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773767.568797] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773767.580160] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773767.591056] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773768.635719] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773768.645846] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773768.660451] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773768.674465] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773768.685808] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773768.696820] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'ATE0+CPMS?<CR>'
<debug> [1337773769.749972] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773769.760771] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773769.773648] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0+CPMS?<CR>'
<debug> [1337773769.784718] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773769.795804] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773769.808341] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+GCAP<CR>'
<debug> [1337773770.152595] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773770.573954] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773770.585832] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB1) device open count is 0 (close)
<info> [1337773770.615358] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB1) closing serial port...
<info> [1337773770.629053] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB1) serial port closed
<debug> [1337773770.825537] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB1) type secondary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<info> [1337773770.841152] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1 claimed port ttyUSB1
<debug> [1337773770.853255] [mm-manager.c:317] add_modem(): Added modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<debug> [1337773770.864330] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<debug> [1337773770.875094] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<debug> [1337773770.999806] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CME ERROR: SIM busy<CR><LF>'
<debug> [1337773771.010424] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 14: SIM busy
<debug> [1337773771.023118] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GCAP<CR>'
<debug> [1337773771.790514] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773771.805913] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info> [1337773771.814753] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info> [1337773771.825106] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773771.839761] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB2) type primary claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<info> [1337773771.850771] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773771.863197] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<debug> [1337773771.872658] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773771.883186] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 3 (open)
<info> [1337773771.894632] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1 claimed port ttyUSB2
<debug> [1337773771.903731] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<debug> [1337773771.913228] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773771.957979] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773771.967925] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMI<CR>'
<debug> [1337773772.029631] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.039450] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMM<CR>'
<debug> [1337773772.100669] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.127464] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GMR<CR>'
<debug> [1337773772.188535] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.201152] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMI<CR>'
<debug> [1337773772.275024] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ZTE INCORPORATED<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.286764] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMM<CR>'
<debug> [1337773772.358939] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>MF668A<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.714193] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGMR<CR>'
<debug> [1337773772.791213] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>BD_MF668AV1.0.1B02<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.800963] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI<CR>'
<debug> [1337773772.850487] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.862005] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATI1<CR>'
<debug> [1337773772.915259] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>Manufacturer: ZTE INCORPORATED<CR><LF>Model: MF668A<CR><LF>Revision: BD_MF668AV1.0.1B02<CR><LF>IMEI: 864851005185039<CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773772.925031] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+GSN<CR>'
<debug> [1337773772.994947] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773773.004856] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGSN<CR>'
<debug> [1337773773.046885] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>864851005185039<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773773.058318] [mm-modem-helpers.c:920] mm_create_device_identifier(): Device ID source '000019d200000117Manufacturer:ZTEINCORPORATEDModel:MF668ARevision:BD_MF668AV1.0.1B02IMEI:864851005185039+GCAP:+CGSM,+FCLASS,+DS864851005185039BD_MF668AV1.0.1B02MF668AZTEINCORPORATED'
<debug> [1337773773.069335] [mm-modem-helpers.c:921] mm_create_device_identifier(): Device ID 'b735f6159cf589e85f8a66cfff7b0bd4eea1a73a'
<debug> [1337773773.079140] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 2 (close)
<debug> [1337773773.090037] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773773.128904] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773773.139060] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773773.148953] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMEE=1<CR>'
<debug> [1337773773.213968] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773773.224271] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPIN?<CR>'
<debug> [1337773773.270919] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPIN: READY<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773773.281351] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 2 (open)
<debug> [1337773773.292467] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 1 (close)
<debug> [1337773773.303734] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CRSM=176,12258,0,0,10<CR>'
<debug> [1337773774.088394] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CRSM: 144,0,"986302003053001571F2"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773774.098617] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info> [1337773774.110909] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<info> [1337773774.121719] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<debug> [1337773774.132658] [mm-generic-gsm.c:507] get_iccid_done(): SIM ID source '8936200003350051172'
<debug> [1337773774.142257] [mm-generic-gsm.c:508] get_iccid_done(): SIM ID '77ac780d92e5c18295a5d48747eaa490ab1b8473'
<debug> [1337773774.153359] [mm-manager.c:243] check_export_modem(): (tty/ttyUSB0): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<debug> [1337773774.164910] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773778.149335] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773782.149763] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'ATE0+CPMS?<CR>'
<debug> [1337773786.150409] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773790.154937] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773794.151272] [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP<CR>'
<debug> [1337773798.155497] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info> [1337773800.483823] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info> [1337773800.494859] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
<info> [1337773800.508274] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
<debug> [1337773800.520460] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
<debug> [1337773800.532397] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): --> 00 78 f0 7e
<debug> [1337773804.152168] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): --> 00 78 f0 7e
<debug> [1337773804.189290] [mm-qcdm-serial-port.c:196] debug_log(): (ttyUSB0): <-- 00 4d 61 72 20 32 39 20 32 30 31 31 31 39 3a 31 39 3a 30 35 4d 61 72 20 32 39 20 32 30 31 31 31 39 3a 31 39 3a 30 35 4d 46 36 36 38 41 4d 31 00 00 08 00 00 00 04 e0 87 b4 7e
<debug> [1337773804.202868] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
<info> [1337773804.214092] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
<info> [1337773804.227197] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
<debug> [1337773804.240058] [mm-modem-base.c:155] mm_modem_base_add_port(): (ttyUSB0) type QCDM claimed by /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1
<info> [1337773804.250107] [mm-manager.c:564] do_grab_port(): (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1 claimed port ttyUSB0
<debug> [1337773804.263585] [mm-manager.c:265] check_export_modem(): Exported modem /sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1 as /org/freedesktop/ModemManager/Modems/0
<debug> [1337773804.274296] [mm-manager.c:278] check_export_modem(): (/org/freedesktop/ModemManager/Modems/0): VID 0x19D2 PID 0x0117 (usb)
<debug> [1337773804.285736] [mm-manager.c:279] check_export_modem(): (/org/freedesktop/ModemManager/Modems/0): data port is ttyUSB2
<info> [1337773826.328551] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB2) opening serial port...
<debug> [1337773826.770304] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB2) device open count is 1 (open)
<info> [1337773826.780664] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (disabled -> enabling)
<debug> [1337773826.899405] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0 V1<CR>'
<debug> [1337773827.286186] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773827.298487] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT%IPSYS?<CR>'
<debug> [1337773827.357020] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>ERROR<CR><LF>'
<debug> [1337773827.368587] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 100: Unknown error
<debug> [1337773827.381065] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATZ E0 V1 X4 &C1 +CMEE=1;+CFUN=1;<CR>'
<debug> [1337773827.534447] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773827.544253] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATE0<CR>'
<debug> [1337773827.580999] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773827.591689] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPMS?<CR>'
<debug> [1337773827.642439] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: "SM",0,25,"SM",0,25,"ME",2,100<CR><LF><CR><LF>OK<CR><LF>'
<info> [1337773827.990244] [mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB1) opening serial port...
<debug> [1337773828.002619] [mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB1) device open count is 1 (open)
<debug> [1337773828.012494] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+IFC=1,1<CR>'
<debug> [1337773828.069799] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773828.079569] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CPMS="ME","ME","ME"<CR>'
<debug> [1337773828.183793] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CPMS: 2,100,2,100,2,100<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773828.195138] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CNMI=2,1,2,1,0<CR>'
<debug> [1337773828.288110] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CMS ERROR: 303<CR><LF>'
<debug> [1337773828.297770] [mm-serial-parsers.c:438] mm_serial_parser_v1_parse(): Got failure code 303: Operation not supported
<debug> [1337773828.309889] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMGF=?<CR>'
<debug> [1337773828.366290] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CMGF: (0-1)<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773828.377421] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CUSD=1<CR>'
<debug> [1337773828.425086] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773828.438875] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND=?<CR>'
<debug> [1337773828.497953] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: ("battchg",(0-5)),("signal",(0-5)),("service",(0-1)),("call",(0-1)),("roam",(0-1)),("smsfull",(0-1)),("GPRS coverage",(0-1)),("callsetup",(0-3))<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773828.509613] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZSNT?<CR>'
<debug> [1337773828.565262] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZSNT: 0,0,1<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773828.575249] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS=?<CR>'
<debug> [1337773828.630150] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CSCS: ("IRA","GSM","UCS2")<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773828.643431] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMGF=1<CR>'
<debug> [1337773828.701578] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<info> [1337773828.712491] [mm-generic-gsm.c:1704] sms_set_format_cb(): (ttyUSB2): using text mode for SMS
<debug> [1337773828.723711] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CMER=3,0,0,1<CR>'
<debug> [1337773828.801987] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773828.815293] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CMER=3,0,0,1<CR>'
<debug> [1337773828.825859] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS="UCS2"<CR>'
<debug> [1337773828.897538] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773828.910174] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773828.921590] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CSCS?<CR>'
<debug> [1337773828.973927] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CSCS: "UCS2"<CR><LF><CR><LF>OK<CR><LF>'
<info> [1337773828.987762] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabling -> enabled)
<debug> [1337773829.000101] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG=2<CR>'
<debug> [1337773829.856750] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773829.872958] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773829.927241] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773829.939275] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG?<CR>'
<debug> [1337773829.990119] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.005788] [mm-generic-gsm.c:3007] mm_generic_gsm_set_reg_status(): CS registration state changed: 1
<info> [1337773830.029726] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabled -> registered)
<debug> [1337773830.042495] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG=2<CR>'
<debug> [1337773830.104173] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773830.115475] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CREG=2<CR>'
<debug> [1337773830.128389] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,2;+COPS?<CR>'
<debug> [1337773830.177378] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773830.188983] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CGREG=2<CR>'
<debug> [1337773830.237593] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,2,"21601",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.253880] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,0;+COPS?<CR>'
<debug> [1337773830.267971] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773830.352730] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,0,"Telenor HU",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.703923] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773830.755228] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.765218] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZPAS?<CR>'
<debug> [1337773830.818428] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZPAS: "EDGE","CS_PS"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.829661] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG?<CR>'
<debug> [1337773830.877384] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.886797] [mm-generic-gsm.c:3007] mm_generic_gsm_set_reg_status(): PS registration state changed: 1
<debug> [1337773830.897721] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,2;+COPS?<CR>'
<debug> [1337773830.990461] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,2,"21601",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773830.999910] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+COPS=3,0;+COPS?<CR>'
<debug> [1337773831.086815] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+COPS: 0,0,"Telenor HU",0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773831.099274] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773831.150731] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773831.161680] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZPAS?<CR>'
<debug> [1337773831.205420] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZPAS: "EDGE","CS_PS"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773859.150311] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CIND?<CR>'
<debug> [1337773859.622368] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CIND: 5,3,1,0,0,0,1,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773859.632516] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZPAS?<CR>'
<debug> [1337773859.689555] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+ZPAS: "EDGE","CS_PS"<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773877.397253] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): number => "*99#"
<debug> [1337773878.553531] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): network_mode => 5
<debug> [1337773878.976940] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): apn => "net"
<debug> [1337773878.987886] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): allowed_mode => 1
<debug> [1337773878.999553] [mm-generic-gsm.c:5924] simple_connect(): (ttyUSB2): allowed_auth => 63
<debug> [1337773879.009278] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 0
<debug> [1337773879.018878] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 2
<debug> [1337773879.046133] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+ZSNT=0,0,1<CR>'
<debug> [1337773879.179540] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'
<debug> [1337773879.194974] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 3
<debug> [1337773879.206422] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CREG?<CR>'
<debug> [1337773879.282817] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773879.295257] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGREG?<CR>'
<debug> [1337773879.384338] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGREG: 2,1, C8B, EECB<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773879.394267] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 4
<debug> [1337773879.406999] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'AT+CGDCONT?<CR>'
<debug> [1337773879.516361] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>+CGDCONT: 1,"IP","net","",0,0<CR><LF><CR><LF>OK<CR><LF>'
<debug> [1337773879.530271] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 5
<info> [1337773879.541676] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (registered -> connecting)
<debug> [1337773879.553719] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): --> 'ATD*99***1#<CR>'
<debug> [1337773879.661322] [mm-at-serial-port.c:333] debug_log(): (ttyUSB2): <-- '<CR><LF>CONNECT 28000000<CR><LF>'
<debug> [1337773879.673210] [mm-port.c:181] mm_port_set_connected(): (ttyUSB2): port now connected
<info> [1337773879.686190] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (connecting -> connected)
<debug> [1337773879.696665] [mm-generic-gsm.c:5813] simple_state_machine(): (ttyUSB2): simple connect state 6
<debug> [1337773880.271794] [mm-manager.c:793] device_added(): (net/ppp0): could not get port's parent device
<debug> [1337773889.157553] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CIND?<CR>'
<debug> [1337773893.150023] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+ZPAS?<CR>'
<info> [1337773900.175391] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (connected -> disconnecting)
<debug> [1337773900.204706] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CGACT=0,1<CR>'
<debug> [1337773901.690051] [mm-serial-port.c:636] data_available(): (ttyUSB2) unexpected port hangup!
<debug> [1337773902.772007] [mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB2) device open count is 0 (close)
<info> [1337773903.197704] [mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB2) closing serial port...
<debug> [1337773903.208340] [mm-port.c:181] mm_port_set_connected(): (ttyUSB2): port now disconnected
<info> [1337773903.218082] [mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB2) serial port closed
<info> [1337773903.237938] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (disconnecting -> connected)
<info> [1337773940.527533] [main.c:41] mm_signal_handler(): Caught signal 2, shutting down...
<info> [1337773940.958003] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (connected -> disconnecting)
<info> [1337773940.972155] [mm-modem.c:746] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/0: state changed (disconnecting -> connected)
disable_disconnect_done: (/sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1): error disconnecting the modem while disabling: (5) The serial port is not open.(mm-generic-gsm.c:2144):disable: runtime check failed: (priv->cid == -1)<debug> [1337773941.001498] [mm-generic-gsm.c:2181] disable(): Shutting down secondary port
<debug> [1337773941.017730] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CREG=0<CR>'
<debug> [1337773944.151406] [mm-at-serial-port.c:333] debug_log(): (ttyUSB1): --> 'AT+CGREG=0<CR>'
May 23 14:07:18 antiX12base kernel: [ 2.851056] registered taskstats version 1
May 23 14:07:18 antiX12base kernel: [ 2.851723] rtc_cmos 00:04: setting system clock to 2012-05-23 12:07:02 UTC (1337774822)
May 23 14:07:18 antiX12base kernel: [ 2.852090] Initializing network drop monitor service
May 23 14:07:18 antiX12base kernel: [ 2.852731] Freeing unused kernel memory: 448k freed
May 23 14:07:18 antiX12base kernel: [ 2.854971] Write protecting the kernel text: 2592k
May 23 14:07:18 antiX12base kernel: [ 2.855201] Write protecting the kernel read-only data: 1060k
May 23 14:07:18 antiX12base kernel: [ 3.169517] r6040: RDC R6040 NAPI net driver,version 0.28 (07Oct2011)
May 23 14:07:18 antiX12base kernel: [ 3.349081] r6040_eth_mii: probed
May 23 14:07:18 antiX12base kernel: [ 3.349282] r6040 0000:00:08.0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01)
May 23 14:07:18 antiX12base kernel: [ 3.411699] usbcore: registered new interface driver usbfs
May 23 14:07:18 antiX12base kernel: [ 3.411984] usbcore: registered new interface driver hub
May 23 14:07:18 antiX12base kernel: [ 3.426382] usbcore: registered new device driver usb
May 23 14:07:18 antiX12base kernel: [ 3.431700] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 23 14:07:18 antiX12base kernel: [ 3.431945] ehci_hcd 0000:00:0a.1: EHCI Host Controller
May 23 14:07:18 antiX12base kernel: [ 3.432136] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
May 23 14:07:18 antiX12base kernel: [ 3.453851] ehci_hcd 0000:00:0a.1: irq 15, io mem 0xfebdb800
May 23 14:07:18 antiX12base kernel: [ 3.456745] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 23 14:07:18 antiX12base kernel: [ 3.460992] SCSI subsystem initialized
May 23 14:07:18 antiX12base kernel: [ 3.465771] Switching to clocksource tsc
May 23 14:07:18 antiX12base kernel: [ 3.465901] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
May 23 14:07:18 antiX12base kernel: [ 3.466134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 23 14:07:18 antiX12base kernel: [ 3.466232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:07:18 antiX12base kernel: [ 3.466350] usb usb1: Product: EHCI Host Controller
May 23 14:07:18 antiX12base kernel: [ 3.466432] usb usb1: Manufacturer: Linux 3.2.0-2-486 ehci_hcd
May 23 14:07:18 antiX12base kernel: [ 3.466519] usb usb1: SerialNumber: 0000:00:0a.1
May 23 14:07:18 antiX12base kernel: [ 3.474186] hub 1-0:1.0: USB hub found
May 23 14:07:18 antiX12base kernel: [ 3.474302] hub 1-0:1.0: 2 ports detected
May 23 14:07:18 antiX12base kernel: [ 3.474960] ehci_hcd 0000:00:0b.1: EHCI Host Controller
May 23 14:07:18 antiX12base kernel: [ 3.475096] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
May 23 14:07:18 antiX12base kernel: [ 3.499120] ehci_hcd 0000:00:0b.1: irq 10, io mem 0xfebdbc00
May 23 14:07:18 antiX12base kernel: [ 3.510463] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
May 23 14:07:18 antiX12base kernel: [ 3.510714] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
May 23 14:07:18 antiX12base kernel: [ 3.510812] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:07:18 antiX12base kernel: [ 3.510930] usb usb2: Product: EHCI Host Controller
May 23 14:07:18 antiX12base kernel: [ 3.511013] usb usb2: Manufacturer: Linux 3.2.0-2-486 ehci_hcd
May 23 14:07:18 antiX12base kernel: [ 3.511099] usb usb2: SerialNumber: 0000:00:0b.1
May 23 14:07:18 antiX12base kernel: [ 3.512189] hub 2-0:1.0: USB hub found
May 23 14:07:18 antiX12base kernel: [ 3.512298] hub 2-0:1.0: 2 ports detected
May 23 14:07:18 antiX12base kernel: [ 3.512949] ohci_hcd 0000:00:0a.0: OHCI Host Controller
May 23 14:07:18 antiX12base kernel: [ 3.513088] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3
May 23 14:07:18 antiX12base kernel: [ 3.513298] ohci_hcd 0000:00:0a.0: irq 5, io mem 0xfebd9000
May 23 14:07:18 antiX12base kernel: [ 3.613238] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
May 23 14:07:18 antiX12base kernel: [ 3.613351] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:07:18 antiX12base kernel: [ 3.613471] usb usb3: Product: OHCI Host Controller
May 23 14:07:18 antiX12base kernel: [ 3.613554] usb usb3: Manufacturer: Linux 3.2.0-2-486 ohci_hcd
May 23 14:07:18 antiX12base kernel: [ 3.613690] usb usb3: SerialNumber: 0000:00:0a.0
May 23 14:07:18 antiX12base kernel: [ 3.620732] hub 3-0:1.0: USB hub found
May 23 14:07:18 antiX12base kernel: [ 3.620851] hub 3-0:1.0: 2 ports detected
May 23 14:07:18 antiX12base kernel: [ 3.621491] ohci_hcd 0000:00:0b.0: OHCI Host Controller
May 23 14:07:18 antiX12base kernel: [ 3.630078] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 4
May 23 14:07:18 antiX12base kernel: [ 3.630313] ohci_hcd 0000:00:0b.0: irq 9, io mem 0xfebda000
May 23 14:07:18 antiX12base kernel: [ 3.738504] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 23 14:07:18 antiX12base kernel: [ 3.738618] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:07:18 antiX12base kernel: [ 3.738737] usb usb4: Product: OHCI Host Controller
May 23 14:07:18 antiX12base kernel: [ 3.738819] usb usb4: Manufacturer: Linux 3.2.0-2-486 ohci_hcd
May 23 14:07:18 antiX12base kernel: [ 3.738904] usb usb4: SerialNumber: 0000:00:0b.0
May 23 14:07:18 antiX12base kernel: [ 3.742019] hub 4-0:1.0: USB hub found
May 23 14:07:18 antiX12base kernel: [ 3.742137] hub 4-0:1.0: 2 ports detected
May 23 14:07:18 antiX12base kernel: [ 3.751463] scsi0 : pata_rdc
May 23 14:07:18 antiX12base kernel: [ 3.754381] scsi1 : pata_rdc
May 23 14:07:18 antiX12base kernel: [ 3.754999] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee80 bmdma 0xed00 irq 14
May 23 14:07:18 antiX12base kernel: [ 3.755099] ata2: PATA max UDMA/100 cmd 0xee00 ctl 0xed80 bmdma 0xed08 irq 14
May 23 14:07:18 antiX12base kernel: [ 3.825666] usb 1-1: new high-speed USB device number 2 using ehci_hcd
May 23 14:07:18 antiX12base kernel: [ 3.962064] usb 1-1: New USB device found, idVendor=058f, idProduct=6254
May 23 14:07:18 antiX12base kernel: [ 3.962194] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 23 14:07:18 antiX12base kernel: [ 3.963939] hub 1-1:1.0: USB hub found
May 23 14:07:18 antiX12base kernel: [ 3.964179] hub 1-1:1.0: 4 ports detected
May 23 14:07:18 antiX12base kernel: [ 4.025943] ata1.00: ATA-6: SD04G RDC SD-IDE HOST CONTROLLER, 01000000, max UDMA/133
May 23 14:07:18 antiX12base kernel: [ 4.026086] ata1.00: 7677952 sectors, multi 0: LBA
May 23 14:07:18 antiX12base kernel: [ 4.026184] ata1.00: limited to UDMA/33 due to 40-wire cable
May 23 14:07:18 antiX12base kernel: [ 4.026638] ata1.00: configured for UDMA/33
May 23 14:07:18 antiX12base kernel: [ 4.027430] scsi 0:0:0:0: Direct-Access ATA SD04G RDC SD 0100 PQ: 0 ANSI: 5
May 23 14:07:18 antiX12base kernel: [ 4.072536] sd 0:0:0:0: [sda] 7677952 512-byte logical blocks: (3.93 GB/3.66 GiB)
May 23 14:07:18 antiX12base kernel: [ 4.073242] sd 0:0:0:0: [sda] Write Protect is off
May 23 14:07:18 antiX12base kernel: [ 4.073654] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
May 23 14:07:18 antiX12base kernel: [ 4.079588] sda: sda1
May 23 14:07:18 antiX12base kernel: [ 4.082237] sd 0:0:0:0: [sda] Attached SCSI disk
May 23 14:07:18 antiX12base kernel: [ 4.249851] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
May 23 14:07:18 antiX12base kernel: [ 4.361253] usb 1-1.1: New USB device found, idVendor=19d2, idProduct=0117
May 23 14:07:18 antiX12base kernel: [ 4.361425] usb 1-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:07:18 antiX12base kernel: [ 4.361618] usb 1-1.1: Product: ZTE WCDMA Technologies MSM
May 23 14:07:18 antiX12base kernel: [ 4.361734] usb 1-1.1: Manufacturer: ZTE,Incorporated
May 23 14:07:18 antiX12base kernel: [ 4.361842] usb 1-1.1: SerialNumber: P680A1ZTED010000
May 23 14:07:18 antiX12base kernel: [ 4.435106] usbcore: registered new interface driver uas
May 23 14:07:18 antiX12base kernel: [ 4.454310] Initializing USB Mass Storage driver...
May 23 14:07:18 antiX12base kernel: [ 4.461228] scsi2 : usb-storage 1-1.1:1.3
May 23 14:07:18 antiX12base kernel: [ 4.462091] usbcore: registered new interface driver usb-storage
May 23 14:07:18 antiX12base kernel: [ 4.462180] USB Mass Storage support registered.
May 23 14:07:18 antiX12base kernel: [ 4.555683] kjournald starting. Commit interval 5 seconds
May 23 14:07:18 antiX12base kernel: [ 4.555835] EXT3-fs (sda1): mounted filesystem with ordered data mode
May 23 14:07:18 antiX12base kernel: [ 5.470114] scsi 2:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
May 23 14:07:18 antiX12base kernel: [ 5.474528] scsi 2:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
May 23 14:07:18 antiX12base kernel: [ 5.481909] sd 2:0:0:1: [sdb] Attached SCSI removable disk
May 23 14:07:18 antiX12base kernel: [ 6.507732] input: PC Speaker as /devices/platform/pcspkr/input/input0
May 23 14:07:18 antiX12base kernel: [ 6.620906] usbcore: registered new interface driver usbserial
May 23 14:07:18 antiX12base kernel: [ 6.621150] USB Serial support registered for generic
May 23 14:07:18 antiX12base kernel: [ 6.670304] usbcore: registered new interface driver usbserial_generic
May 23 14:07:18 antiX12base kernel: [ 6.670408] usbserial: USB Serial Driver core
May 23 14:07:18 antiX12base kernel: [ 6.729322] USB Serial support registered for GSM modem (1-port)
May 23 14:07:18 antiX12base kernel: [ 6.775202] option 1-1.1:1.0: GSM modem (1-port) converter detected
May 23 14:07:18 antiX12base kernel: [ 6.789627] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
May 23 14:07:18 antiX12base kernel: [ 6.790018] option 1-1.1:1.1: GSM modem (1-port) converter detected
May 23 14:07:18 antiX12base kernel: [ 6.814783] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
May 23 14:07:18 antiX12base kernel: [ 6.815178] option 1-1.1:1.2: GSM modem (1-port) converter detected
May 23 14:07:18 antiX12base kernel: [ 6.820964] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
May 23 14:07:18 antiX12base kernel: [ 6.821806] usbcore: registered new interface driver option
May 23 14:07:18 antiX12base kernel: [ 6.821972] option: v0.7.2:USB Driver for GSM modems
May 23 14:07:18 antiX12base kernel: [ 6.822895] sr0: scsi-1 drive
May 23 14:07:18 antiX12base kernel: [ 6.823013] cdrom: Uniform CD-ROM driver Revision: 3.20
May 23 14:07:18 antiX12base kernel: [ 8.391009] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/input/input1
May 23 14:07:18 antiX12base kernel: [ 10.362912] EXT3-fs (sda1): using internal journal
May 23 14:07:18 antiX12base kernel: [ 10.466968] aufs: module is from the staging directory, the quality is unknown, you have been warned.
May 23 14:07:18 antiX12base kernel: [ 10.484156] aufs 3.2-20120312
May 23 14:07:18 antiX12base kernel: [ 15.192902] fuse init (API version 7.17)
May 23 14:07:18 antiX12base kernel: [ 16.348847] eth0: link UP - 100/full
May 23 14:08:29 antiX12base pppd[2142]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
May 23 14:08:29 antiX12base kernel: [ 90.476457] PPP generic driver version 2.4.2
May 23 14:08:29 antiX12base pppd[2142]: pppd 2.4.5 started by root, uid 0
May 23 14:08:29 antiX12base pppd[2142]: Using interface ppp0
May 23 14:08:29 antiX12base pppd[2142]: Connect: ppp0 <--> /dev/ttyUSB2
May 23 14:08:29 antiX12base pppd[2142]: CHAP authentication succeeded
May 23 14:08:29 antiX12base pppd[2142]: CHAP authentication succeeded
May 23 14:08:29 antiX12base kernel: [ 90.599235] PPP BSD Compression module registered
May 23 14:08:29 antiX12base kernel: [ 90.626101] PPP Deflate Compression module registered
May 23 14:08:34 antiX12base kernel: [ 95.864745] usb 1-1.1: USB disconnect, device number 3
May 23 14:08:34 antiX12base kernel: [ 95.865461] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
May 23 14:08:34 antiX12base kernel: [ 95.865615] option 1-1.1:1.0: device disconnected
May 23 14:08:34 antiX12base pppd[2142]: Modem hangup
May 23 14:08:34 antiX12base pppd[2142]: Connection terminated.
May 23 14:08:34 antiX12base kernel: [ 95.876355] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
May 23 14:08:34 antiX12base kernel: [ 95.876514] option 1-1.1:1.1: device disconnected
May 23 14:08:34 antiX12base kernel: [ 95.892601] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
May 23 14:08:34 antiX12base kernel: [ 95.892727] option 1-1.1:1.2: device disconnected
May 23 14:08:34 antiX12base pppd[2142]: Exit.
May 23 14:08:34 antiX12base kernel: [ 96.168245] usb 1-1.1: new high-speed USB device number 4 using ehci_hcd
May 23 14:08:35 antiX12base kernel: [ 96.279693] usb 1-1.1: New USB device found, idVendor=19d2, idProduct=0117
May 23 14:08:35 antiX12base kernel: [ 96.279725] usb 1-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:08:35 antiX12base kernel: [ 96.279745] usb 1-1.1: Product: ZTE WCDMA Technologies MSM
May 23 14:08:35 antiX12base kernel: [ 96.279763] usb 1-1.1: Manufacturer: ZTE,Incorporated
May 23 14:08:35 antiX12base kernel: [ 96.279780] usb 1-1.1: SerialNumber: P680A1ZTED010000
May 23 14:08:35 antiX12base kernel: [ 96.289398] option 1-1.1:1.0: GSM modem (1-port) converter detected
May 23 14:08:35 antiX12base kernel: [ 96.290771] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
May 23 14:08:35 antiX12base kernel: [ 96.291904] option 1-1.1:1.1: GSM modem (1-port) converter detected
May 23 14:08:35 antiX12base kernel: [ 96.299116] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
May 23 14:08:35 antiX12base kernel: [ 96.301047] option 1-1.1:1.2: GSM modem (1-port) converter detected
May 23 14:08:35 antiX12base kernel: [ 96.302996] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
May 23 14:08:35 antiX12base kernel: [ 96.312196] scsi3 : usb-storage 1-1.1:1.3
May 23 14:08:35 antiX12base mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1"
May 23 14:08:35 antiX12base mtp-probe: bus: 1, device: 4 was not an MTP device
May 23 14:08:36 antiX12base kernel: [ 97.317040] scsi 3:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
May 23 14:08:36 antiX12base kernel: [ 97.318008] scsi 3:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
May 23 14:08:36 antiX12base kernel: [ 97.334357] sr0: scsi-1 drive
May 23 14:08:36 antiX12base kernel: [ 97.357316] sd 3:0:0:1: [sdb] Attached SCSI removable disk
May 23 14:09:17 antiX12base pppd[2287]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
May 23 14:09:17 antiX12base pppd[2287]: pppd 2.4.5 started by root, uid 0
May 23 14:09:17 antiX12base pppd[2287]: Using interface ppp0
May 23 14:09:17 antiX12base pppd[2287]: Connect: ppp0 <--> /dev/ttyUSB2
May 23 14:09:17 antiX12base pppd[2287]: CHAP authentication succeeded
May 23 14:09:17 antiX12base pppd[2287]: CHAP authentication succeeded
May 23 14:09:24 antiX12base kernel: [ 146.033339] usb 1-1.1: USB disconnect, device number 4
May 23 14:09:24 antiX12base kernel: [ 146.034020] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
May 23 14:09:24 antiX12base kernel: [ 146.034174] option 1-1.1:1.0: device disconnected
May 23 14:09:24 antiX12base pppd[2287]: Modem hangup
May 23 14:09:24 antiX12base pppd[2287]: Connection terminated.
May 23 14:09:24 antiX12base kernel: [ 146.044505] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
May 23 14:09:24 antiX12base kernel: [ 146.044664] option 1-1.1:1.1: device disconnected
May 23 14:09:24 antiX12base kernel: [ 146.068068] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
May 23 14:09:24 antiX12base kernel: [ 146.068195] option 1-1.1:1.2: device disconnected
May 23 14:09:24 antiX12base pppd[2287]: Exit.
May 23 14:09:25 antiX12base kernel: [ 146.335722] usb 1-1.1: new high-speed USB device number 5 using ehci_hcd
May 23 14:09:25 antiX12base kernel: [ 146.447031] usb 1-1.1: New USB device found, idVendor=19d2, idProduct=0117
May 23 14:09:25 antiX12base kernel: [ 146.447063] usb 1-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:09:25 antiX12base kernel: [ 146.447084] usb 1-1.1: Product: ZTE WCDMA Technologies MSM
May 23 14:09:25 antiX12base kernel: [ 146.447101] usb 1-1.1: Manufacturer: ZTE,Incorporated
May 23 14:09:25 antiX12base kernel: [ 146.447118] usb 1-1.1: SerialNumber: P680A1ZTED010000
May 23 14:09:25 antiX12base kernel: [ 146.458176] option 1-1.1:1.0: GSM modem (1-port) converter detected
May 23 14:09:25 antiX12base kernel: [ 146.459380] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
May 23 14:09:25 antiX12base kernel: [ 146.461821] option 1-1.1:1.1: GSM modem (1-port) converter detected
May 23 14:09:25 antiX12base kernel: [ 146.462918] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
May 23 14:09:25 antiX12base kernel: [ 146.468409] option 1-1.1:1.2: GSM modem (1-port) converter detected
May 23 14:09:25 antiX12base kernel: [ 146.469659] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
May 23 14:09:25 antiX12base mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1"
May 23 14:09:25 antiX12base kernel: [ 146.475762] scsi4 : usb-storage 1-1.1:1.3
May 23 14:09:25 antiX12base mtp-probe: bus: 1, device: 5 was not an MTP device
May 23 14:09:26 antiX12base kernel: [ 147.477264] scsi 4:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
May 23 14:09:26 antiX12base kernel: [ 147.478093] scsi 4:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
May 23 14:09:26 antiX12base kernel: [ 147.491932] sr0: scsi-1 drive
May 23 14:09:26 antiX12base kernel: [ 147.508296] sd 4:0:0:1: [sdb] Attached SCSI removable disk
May 23 14:09:26 antiX12base kernel: [ 147.593886] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
May 23 14:09:26 antiX12base kernel: [ 147.594041] option 1-1.1:1.0: device disconnected
May 23 14:09:26 antiX12base kernel: [ 147.600430] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
May 23 14:09:26 antiX12base kernel: [ 147.600619] option 1-1.1:1.1: device disconnected
May 23 14:09:26 antiX12base kernel: [ 147.611695] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
May 23 14:09:26 antiX12base kernel: [ 147.611827] option 1-1.1:1.2: device disconnected
May 23 14:09:26 antiX12base kernel: [ 147.628729] usb 1-1.1: USB disconnect, device number 5
May 23 14:09:26 antiX12base kernel: [ 147.887633] usb 1-1.1: new high-speed USB device number 6 using ehci_hcd
May 23 14:09:26 antiX12base kernel: [ 147.999188] usb 1-1.1: New USB device found, idVendor=19d2, idProduct=0117
May 23 14:09:26 antiX12base kernel: [ 147.999221] usb 1-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:09:26 antiX12base kernel: [ 147.999242] usb 1-1.1: Product: ZTE WCDMA Technologies MSM
May 23 14:09:26 antiX12base kernel: [ 147.999260] usb 1-1.1: Manufacturer: ZTE,Incorporated
May 23 14:09:26 antiX12base kernel: [ 147.999277] usb 1-1.1: SerialNumber: P680A1ZTED010000
May 23 14:09:26 antiX12base kernel: [ 148.005190] option 1-1.1:1.0: GSM modem (1-port) converter detected
May 23 14:09:26 antiX12base kernel: [ 148.006355] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
May 23 14:09:26 antiX12base kernel: [ 148.007242] option 1-1.1:1.1: GSM modem (1-port) converter detected
May 23 14:09:26 antiX12base kernel: [ 148.010534] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
May 23 14:09:26 antiX12base kernel: [ 148.015898] option 1-1.1:1.2: GSM modem (1-port) converter detected
May 23 14:09:26 antiX12base kernel: [ 148.017392] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
May 23 14:09:26 antiX12base kernel: [ 148.027952] scsi5 : usb-storage 1-1.1:1.3
May 23 14:09:27 antiX12base mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:0a.1/usb1/1-1/1-1.1"
May 23 14:09:27 antiX12base mtp-probe: bus: 1, device: 6 was not an MTP device
May 23 14:09:27 antiX12base kernel: [ 149.032287] scsi 5:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
May 23 14:09:27 antiX12base kernel: [ 149.033115] scsi 5:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
May 23 14:09:27 antiX12base kernel: [ 149.062842] sr0: scsi-1 drive
May 23 14:09:27 antiX12base kernel: [ 149.082675] sd 5:0:0:1: [sdb] Attached SCSI removable disk
May 23 14:11:38 antiX12base kernel: [ 0.000000] Initializing cgroup subsys cpuset
May 23 14:11:38 antiX12base kernel: [ 0.000000] Initializing cgroup subsys cpu
May 23 14:11:38 antiX12base kernel: [ 0.000000] Linux version 3.2.0-2-486 (Debian 3.2.16-1) (debian-kernel< at >lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-4) ) #1 Mon Apr 30 05:10:18 UTC 2012
May 23 14:11:38 antiX12base kernel: [ 0.000000] BIOS-provided physical RAM map:
May 23 14:11:38 antiX12base kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
May 23 14:11:38 antiX12base kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
May 23 14:11:38 antiX12base kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
May 23 14:11:38 antiX12base kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
May 23 14:11:38 antiX12base syslog-ng[1573]: syslog-ng starting up; version='3.3.4'
May 23 14:11:38 antiX12base kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
May 23 14:11:38 antiX12base kernel: [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
May 23 14:11:38 antiX12base kernel: [ 0.000000] DMI not present or invalid.
May 23 14:11:38 antiX12base kernel: [ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x100000
May 23 14:11:38 antiX12base kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
May 23 14:11:38 antiX12base kernel: [ 0.000000] RAMDISK: 1f623000 - 1fff0000
May 23 14:11:38 antiX12base kernel: [ 0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219)
May 23 14:11:38 antiX12base kernel: [ 0.000000] 0MB HIGHMEM available.
May 23 14:11:38 antiX12base kernel: [ 0.000000] 512MB LOWMEM available.
May 23 14:11:38 antiX12base kernel: [ 0.000000] mapped low ram: 0 - 20000000
May 23 14:11:38 antiX12base kernel: [ 0.000000] low ram: 0 - 20000000
May 23 14:11:38 antiX12base kernel: [ 0.000000] Zone PFN ranges:
May 23 14:11:38 antiX12base kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
May 23 14:11:38 antiX12base kernel: [ 0.000000] Normal 0x00001000 -> 0x00020000
May 23 14:11:38 antiX12base kernel: [ 0.000000] HighMem empty
May 23 14:11:38 antiX12base kernel: [ 0.000000] Movable zone start PFN for each node
May 23 14:11:38 antiX12base kernel: [ 0.000000] early_node_map[2] active PFN ranges
May 23 14:11:38 antiX12base kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
May 23 14:11:38 antiX12base kernel: [ 0.000000] 0: 0x00000100 -> 0x00020000
May 23 14:11:38 antiX12base kernel: [ 0.000000] Using APIC driver default
May 23 14:11:38 antiX12base kernel: [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
May 23 14:11:38 antiX12base kernel: [ 0.000000] No local APIC present or hardware disabled
May 23 14:11:38 antiX12base kernel: [ 0.000000] APIC: disable apic facility
May 23 14:11:38 antiX12base kernel: [ 0.000000] APIC: switched to apic NOOP
May 23 14:11:38 antiX12base kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
May 23 14:11:38 antiX12base kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
May 23 14:11:38 antiX12base kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
May 23 14:11:38 antiX12base kernel: [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:df000000)
May 23 14:11:38 antiX12base kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
May 23 14:11:38 antiX12base kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
May 23 14:11:38 antiX12base kernel: [ 0.000000] Kernel command line: root=UUID=7c5b4bf1-e3e5-4f3b-8fdf-27f6620ca748 ro
May 23 14:11:38 antiX12base kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
May 23 14:11:38 antiX12base kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
May 23 14:11:38 antiX12base kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
May 23 14:11:38 antiX12base kernel: [ 0.000000] Initializing CPU#0
May 23 14:11:38 antiX12base kernel: [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
May 23 14:11:38 antiX12base kernel: [ 0.000000] Memory: 503876k/524288k available (2590k kernel code, 19960k reserved, 1325k data, 448k init, 0k highmem)
May 23 14:11:38 antiX12base kernel: [ 0.000000] virtual kernel memory layout:
May 23 14:11:38 antiX12base kernel: [ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
May 23 14:11:38 antiX12base kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
May 23 14:11:38 antiX12base kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
May 23 14:11:38 antiX12base kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
May 23 14:11:38 antiX12base kernel: [ 0.000000] .init : 0xc13d3000 - 0xc1443000 ( 448 kB)
May 23 14:11:38 antiX12base kernel: [ 0.000000] .data : 0xc128782c - 0xc13d2e00 (1325 kB)
May 23 14:11:38 antiX12base kernel: [ 0.000000] .text : 0xc1000000 - 0xc128782c (2590 kB)
May 23 14:11:38 antiX12base kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
May 23 14:11:38 antiX12base kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
May 23 14:11:38 antiX12base kernel: [ 0.000000] Console: colour VGA+ 80x25
May 23 14:11:38 antiX12base kernel: [ 0.000000] console [tty0] enabled
May 23 14:11:38 antiX12base kernel: [ 0.000000] Fast TSC calibration using PIT
May 23 14:11:38 antiX12base kernel: [ 0.000000] Detected 933.198 MHz processor.
May 23 14:11:38 antiX12base kernel: [ 0.008009] Calibrating delay loop (skipped), value calculated using timer frequency.. 1866.39 BogoMIPS (lpj=3732792)
May 23 14:11:38 antiX12base kernel: [ 0.012085] pid_max: default: 32768 minimum: 301
May 23 14:11:38 antiX12base kernel: [ 0.012468] Security Framework initialized
May 23 14:11:38 antiX12base kernel: [ 0.012564] AppArmor: AppArmor disabled by boot time parameter
May 23 14:11:38 antiX12base kernel: [ 0.012724] Mount-cache hash table entries: 512
May 23 14:11:38 antiX12base kernel: [ 0.013508] Initializing cgroup subsys cpuacct
May 23 14:11:38 antiX12base kernel: [ 0.013603] Initializing cgroup subsys memory
May 23 14:11:38 antiX12base kernel: [ 0.013742] Initializing cgroup subsys devices
May 23 14:11:38 antiX12base kernel: [ 0.013825] Initializing cgroup subsys freezer
May 23 14:11:38 antiX12base kernel: [ 0.013904] Initializing cgroup subsys net_cls
May 23 14:11:38 antiX12base kernel: [ 0.013984] Initializing cgroup subsys blkio
May 23 14:11:38 antiX12base kernel: [ 0.014108] Initializing cgroup subsys perf_event
May 23 14:11:38 antiX12base kernel: [ 0.014378] CPU: Vortex86 SoC 05/08 stepping 06
May 23 14:11:38 antiX12base kernel: [ 0.016730] Performance Events:
May 23 14:11:38 antiX12base kernel: [ 0.017817] NMI watchdog disabled (cpu0): hardware events not enabled
May 23 14:11:38 antiX12base kernel: [ 0.018863] devtmpfs: initialized
May 23 14:11:38 antiX12base kernel: [ 0.021177] print_constraints: dummy:
May 23 14:11:38 antiX12base kernel: [ 0.021689] NET: Registered protocol family 16
May 23 14:11:38 antiX12base kernel: [ 0.023017] EISA bus registered
May 23 14:11:38 antiX12base kernel: [ 0.024364] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=0
May 23 14:11:38 antiX12base kernel: [ 0.024456] PCI: Using configuration type 1 for base access
May 23 14:11:38 antiX12base kernel: [ 0.033841] bio: create slab <bio-0> at 0
May 23 14:11:38 antiX12base kernel: [ 0.034518] ACPI: Interpreter disabled.
May 23 14:11:38 antiX12base kernel: [ 0.035139] vgaarb: loaded
May 23 14:11:38 antiX12base kernel: [ 0.035832] PCI: Probing PCI hardware
May 23 14:11:38 antiX12base kernel: [ 0.040668] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
May 23 14:11:38 antiX12base kernel: [ 0.041301] pci 0000:00:07.0: default IRQ router [17f3:6036]
May 23 14:11:38 antiX12base kernel: [ 0.042468] Switching to clocksource pit
May 23 14:11:38 antiX12base kernel: [ 0.050900] pnp: PnP ACPI: disabled
May 23 14:11:38 antiX12base kernel: [ 0.050992] PnPBIOS: Scanning system for PnP BIOS support...
May 23 14:11:38 antiX12base kernel: [ 0.051136] PnPBIOS: Found PnP BIOS installation structure at 0xc00f3150
May 23 14:11:38 antiX12base kernel: [ 0.051229] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x3cca, dseg 0xf0000
May 23 14:11:38 antiX12base kernel: [ 0.051997] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
May 23 14:11:38 antiX12base kernel: [ 0.052102] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
May 23 14:11:38 antiX12base kernel: [ 0.052200] system 00:00: [mem 0x000e4000-0x000fffff] could not be reserved
May 23 14:11:38 antiX12base kernel: [ 0.052298] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
May 23 14:11:38 antiX12base kernel: [ 0.052398] system 00:00: [mem 0xff000000-0xfffbffff] has been reserved
May 23 14:11:38 antiX12base kernel: [ 0.052496] system 00:00: [mem 0xfffc0000-0xffffffff] has been reserved
May 23 14:11:38 antiX12base kernel: [ 0.055600] system 00:09: [io 0x04d0-0x04d1] has been reserved
May 23 14:11:38 antiX12base kernel: [ 0.055698] system 00:09: [io 0x0cf8-0x0cff] could not be reserved
May 23 14:11:38 antiX12base kernel: [ 0.055791] system 00:09: [io 0xfc00-0xfc0f] has been reserved
May 23 14:11:38 antiX12base kernel: [ 0.056259] system 00:0a: [io 0x03f0-0x03f5] has been reserved
May 23 14:11:38 antiX12base kernel: [ 0.056398] PnPBIOS: 11 nodes reported by PnP BIOS; 11 recorded by driver
May 23 14:11:38 antiX12base kernel: [ 0.079731] NET: Registered protocol family 2
May 23 14:11:38 antiX12base kernel: [ 0.080186] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
May 23 14:11:38 antiX12base kernel: [ 0.081748] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
May 23 14:11:38 antiX12base kernel: [ 0.082331] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
May 23 14:11:38 antiX12base kernel: [ 0.082648] TCP: Hash tables configured (established 16384 bind 16384)
May 23 14:11:38 antiX12base kernel: [ 0.082738] TCP reno registered
May 23 14:11:38 antiX12base kernel: [ 0.082817] UDP hash table entries: 256 (order: 0, 4096 bytes)
May 23 14:11:38 antiX12base kernel: [ 0.082921] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
May 23 14:11:38 antiX12base kernel: [ 0.083423] NET: Registered protocol family 1
May 23 14:11:38 antiX12base kernel: [ 0.233916] Unpacking initramfs...
May 23 14:11:38 antiX12base kernel: [ 2.351843] Freeing initrd memory: 10036k freed
May 23 14:11:38 antiX12base kernel: [ 2.394519] audit: initializing netlink socket (disabled)
May 23 14:11:38 antiX12base kernel: [ 2.394670] type=2000 audit(1337775072.392:1): initialized
May 23 14:11:38 antiX12base kernel: [ 2.473515] HugeTLB registered 4 MB page size, pre-allocated 0 pages
May 23 14:11:38 antiX12base kernel: [ 2.474429] VFS: Disk quotas dquot_6.5.2
May 23 14:11:38 antiX12base kernel: [ 2.474656] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May 23 14:11:38 antiX12base kernel: [ 2.475092] msgmni has been set to 1003
May 23 14:11:38 antiX12base kernel: [ 2.476258] alg: No test for stdrng (krng)
May 23 14:11:38 antiX12base kernel: [ 2.476558] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
May 23 14:11:38 antiX12base kernel: [ 2.476684] io scheduler noop registered
May 23 14:11:38 antiX12base kernel: [ 2.476760] io scheduler deadline registered
May 23 14:11:38 antiX12base kernel: [ 2.476888] io scheduler cfq registered (default)
May 23 14:11:38 antiX12base kernel: [ 2.477989] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
May 23 14:11:38 antiX12base kernel: [ 2.478419] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
May 23 14:11:38 antiX12base kernel: [ 2.478511] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
May 23 14:11:38 antiX12base kernel: [ 2.479863] isapnp: Scanning for PnP cards...
May 23 14:11:38 antiX12base kernel: [ 2.833665] isapnp: No Plug & Play device found
May 23 14:11:38 antiX12base kernel: [ 2.834172] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
May 23 14:11:38 antiX12base kernel: [ 2.838103] Linux agpgart interface v0.103
May 23 14:11:38 antiX12base kernel: [ 2.840371] i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
May 23 14:11:38 antiX12base kernel: [ 2.840466] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
May 23 14:11:38 antiX12base kernel: [ 2.841397] serio: i8042 KBD port at 0x60,0x64 irq 1
May 23 14:11:38 antiX12base kernel: [ 2.842623] mousedev: PS/2 mouse device common for all mice
May 23 14:11:38 antiX12base kernel: [ 2.843505] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
May 23 14:11:38 antiX12base kernel: [ 2.843644] rtc0: alarms up to one day, 114 bytes nvram
May 23 14:11:38 antiX12base kernel: [ 2.844323] EISA: Probing bus 0 at eisa.0
May 23 14:11:38 antiX12base kernel: [ 2.844593] EISA: Detected 0 cards.
May 23 14:11:38 antiX12base kernel: [ 2.844669] cpuidle: using governor ladder
May 23 14:11:38 antiX12base kernel: [ 2.844745] cpuidle: using governor menu
May 23 14:11:38 antiX12base kernel: [ 2.846207] TCP cubic registered
May 23 14:11:38 antiX12base kernel: [ 2.846453] NET: Registered protocol family 10
May 23 14:11:38 antiX12base kernel: [ 2.849834] Mobile IPv6
May 23 14:11:38 antiX12base kernel: [ 2.849914] NET: Registered protocol family 17
May 23 14:11:38 antiX12base kernel: [ 2.850015] Registering the dns_resolver key type
May 23 14:11:38 antiX12base kernel: [ 2.850173] Using IPI Shortcut mode
May 23 14:11:38 antiX12base kernel: [ 2.851301] registered taskstats version 1
May 23 14:11:38 antiX12base kernel: [ 2.851973] rtc_cmos 00:04: setting system clock to 2012-05-23 12:11:13 UTC (1337775073)
May 23 14:11:38 antiX12base kernel: [ 2.852339] Initializing network drop monitor service
May 23 14:11:38 antiX12base kernel: [ 2.852979] Freeing unused kernel memory: 448k freed
May 23 14:11:38 antiX12base kernel: [ 2.855217] Write protecting the kernel text: 2592k
May 23 14:11:38 antiX12base kernel: [ 2.855447] Write protecting the kernel read-only data: 1060k
May 23 14:11:38 antiX12base kernel: [ 3.184009] r6040: RDC R6040 NAPI net driver,version 0.28 (07Oct2011)
May 23 14:11:38 antiX12base kernel: [ 3.304131] r6040_eth_mii: probed
May 23 14:11:38 antiX12base kernel: [ 3.304335] r6040 0000:00:08.0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01)
May 23 14:11:38 antiX12base kernel: [ 3.411728] usbcore: registered new interface driver usbfs
May 23 14:11:38 antiX12base kernel: [ 3.412014] usbcore: registered new interface driver hub
May 23 14:11:38 antiX12base kernel: [ 3.431596] usbcore: registered new device driver usb
May 23 14:11:38 antiX12base kernel: [ 3.460028] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May 23 14:11:38 antiX12base kernel: [ 3.460293] ehci_hcd 0000:00:0a.1: EHCI Host Controller
May 23 14:11:38 antiX12base kernel: [ 3.460515] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
May 23 14:11:38 antiX12base kernel: [ 3.465726] Switching to clocksource tsc
May 23 14:11:38 antiX12base kernel: [ 3.467961] SCSI subsystem initialized
May 23 14:11:38 antiX12base kernel: [ 3.495762] ehci_hcd 0000:00:0a.1: irq 15, io mem 0xfebdb800
May 23 14:11:38 antiX12base kernel: [ 3.528825] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May 23 14:11:38 antiX12base kernel: [ 3.569123] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
May 23 14:11:38 antiX12base kernel: [ 3.569381] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 23 14:11:38 antiX12base kernel: [ 3.569479] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:11:38 antiX12base kernel: [ 3.569600] usb usb1: Product: EHCI Host Controller
May 23 14:11:38 antiX12base kernel: [ 3.569728] usb usb1: Manufacturer: Linux 3.2.0-2-486 ehci_hcd
May 23 14:11:38 antiX12base kernel: [ 3.569816] usb usb1: SerialNumber: 0000:00:0a.1
May 23 14:11:38 antiX12base kernel: [ 3.583695] hub 1-0:1.0: USB hub found
May 23 14:11:38 antiX12base kernel: [ 3.583818] hub 1-0:1.0: 2 ports detected
May 23 14:11:38 antiX12base kernel: [ 3.584475] ohci_hcd 0000:00:0a.0: OHCI Host Controller
May 23 14:11:38 antiX12base kernel: [ 3.584671] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
May 23 14:11:38 antiX12base kernel: [ 3.584887] ohci_hcd 0000:00:0a.0: irq 5, io mem 0xfebd9000
May 23 14:11:38 antiX12base kernel: [ 3.759200] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 23 14:11:38 antiX12base kernel: [ 3.759311] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:11:38 antiX12base kernel: [ 3.759432] usb usb2: Product: OHCI Host Controller
May 23 14:11:38 antiX12base kernel: [ 3.759515] usb usb2: Manufacturer: Linux 3.2.0-2-486 ohci_hcd
May 23 14:11:38 antiX12base kernel: [ 3.759600] usb usb2: SerialNumber: 0000:00:0a.0
May 23 14:11:38 antiX12base kernel: [ 3.765766] hub 2-0:1.0: USB hub found
May 23 14:11:38 antiX12base kernel: [ 3.765894] hub 2-0:1.0: 2 ports detected
May 23 14:11:38 antiX12base kernel: [ 3.766561] ehci_hcd 0000:00:0b.1: EHCI Host Controller
May 23 14:11:38 antiX12base kernel: [ 3.766698] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3
May 23 14:11:38 antiX12base kernel: [ 3.789790] ehci_hcd 0000:00:0b.1: irq 10, io mem 0xfebdbc00
May 23 14:11:38 antiX12base kernel: [ 3.801731] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
May 23 14:11:38 antiX12base kernel: [ 3.801965] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
May 23 14:11:38 antiX12base kernel: [ 3.802062] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:11:38 antiX12base kernel: [ 3.802181] usb usb3: Product: EHCI Host Controller
May 23 14:11:38 antiX12base kernel: [ 3.802263] usb usb3: Manufacturer: Linux 3.2.0-2-486 ehci_hcd
May 23 14:11:38 antiX12base kernel: [ 3.802348] usb usb3: SerialNumber: 0000:00:0b.1
May 23 14:11:38 antiX12base kernel: [ 3.804040] hub 3-0:1.0: USB hub found
May 23 14:11:38 antiX12base kernel: [ 3.804154] hub 3-0:1.0: 2 ports detected
May 23 14:11:38 antiX12base kernel: [ 3.817765] scsi0 : pata_rdc
May 23 14:11:38 antiX12base kernel: [ 3.825842] scsi1 : pata_rdc
May 23 14:11:38 antiX12base kernel: [ 3.827000] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee80 bmdma 0xed00 irq 14
May 23 14:11:38 antiX12base kernel: [ 3.827100] ata2: PATA max UDMA/100 cmd 0xee00 ctl 0xed80 bmdma 0xed08 irq 14
May 23 14:11:38 antiX12base kernel: [ 3.827682] ohci_hcd 0000:00:0b.0: OHCI Host Controller
May 23 14:11:38 antiX12base kernel: [ 3.827831] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 4
May 23 14:11:38 antiX12base kernel: [ 3.828052] ohci_hcd 0000:00:0b.0: irq 9, io mem 0xfebda000
May 23 14:11:38 antiX12base kernel: [ 3.911696] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
May 23 14:11:38 antiX12base kernel: [ 3.911805] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 23 14:11:38 antiX12base kernel: [ 3.911925] usb usb4: Product: OHCI Host Controller
May 23 14:11:38 antiX12base kernel: [ 3.912008] usb usb4: Manufacturer: Linux 3.2.0-2-486 ohci_hcd
May 23 14:11:38 antiX12base kernel: [ 3.912094] usb usb4: SerialNumber: 0000:00:0b.0
May 23 14:11:38 antiX12base kernel: [ 3.913859] hub 4-0:1.0: USB hub found
May 23 14:11:38 antiX12base kernel: [ 3.913976] hub 4-0:1.0: 2 ports detected
May 23 14:11:38 antiX12base kernel: [ 4.098083] ata1.00: ATA-6: SD04G RDC SD-IDE HOST CONTROLLER, 01000000, max UDMA/133
May 23 14:11:38 antiX12base kernel: [ 4.098220] ata1.00: 7677952 sectors, multi 0: LBA
May 23 14:11:38 antiX12base kernel: [ 4.098317] ata1.00: limited to UDMA/33 due to 40-wire cable
May 23 14:11:38 antiX12base kernel: [ 4.098771] ata1.00: configured for UDMA/33
May 23 14:11:38 antiX12base kernel: [ 4.099539] scsi 0:0:0:0: Direct-Access ATA SD04G RDC SD 0100 PQ: 0 ANSI: 5
May 23 14:11:38 antiX12base kernel: [ 4.126512] usb 3-1: new high-speed USB device number 2 using ehci_hcd
May 23 14:11:38 antiX12base kernel: [ 4.160009] sd 0:0:0:0: [sda] 7677952 512-byte logical blocks: (3.93 GB/3.66 GiB)
May 23 14:11:38 antiX12base kernel: [ 4.160678] sd 0:0:0:0: [sda] Write Protect is off
May 23 14:11:38 antiX12base kernel: [ 4.161012] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
May 23 14:11:38 antiX12base kernel: [ 4.166760] sda: sda1
May 23 14:11:38 antiX12base kernel: [ 4.169467] sd 0:0:0:0: [sda] Attached SCSI disk
May 23 14:11:38 antiX12base kernel: [ 4.261389] usb 3-1: New USB device found, idVendor=19d2, idProduct=2000
May 23 14:11:38 antiX12base kernel: [ 4.261596] usb 3-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:11:38 antiX12base kernel: [ 4.261721] usb 3-1: Product: ZTE WCDMA Technologies MSM
May 23 14:11:38 antiX12base kernel: [ 4.261860] usb 3-1: Manufacturer: ZTE,Incorporated
May 23 14:11:38 antiX12base kernel: [ 4.261971] usb 3-1: SerialNumber: P680A1ZTED010000
May 23 14:11:38 antiX12base kernel: [ 4.289472] usbcore: registered new interface driver uas
May 23 14:11:38 antiX12base kernel: [ 4.313361] Initializing USB Mass Storage driver...
May 23 14:11:38 antiX12base kernel: [ 4.314498] scsi2 : usb-storage 3-1:1.0
May 23 14:11:38 antiX12base kernel: [ 4.315844] usbcore: registered new interface driver usb-storage
May 23 14:11:38 antiX12base kernel: [ 4.316057] USB Mass Storage support registered.
May 23 14:11:38 antiX12base kernel: [ 4.588001] EXT3-fs (sda1): recovery required on readonly filesystem
May 23 14:11:38 antiX12base kernel: [ 4.588108] EXT3-fs (sda1): write access will be enabled during recovery
May 23 14:11:38 antiX12base kernel: [ 5.315923] scsi 2:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
May 23 14:11:38 antiX12base kernel: [ 5.344214] sr0: scsi-1 drive
May 23 14:11:38 antiX12base kernel: [ 5.344338] cdrom: Uniform CD-ROM driver Revision: 3.20
May 23 14:11:38 antiX12base kernel: [ 13.717142] kjournald starting. Commit interval 5 seconds
May 23 14:11:38 antiX12base kernel: [ 13.717311] EXT3-fs (sda1): recovery complete
May 23 14:11:38 antiX12base kernel: [ 13.722798] EXT3-fs (sda1): mounted filesystem with ordered data mode
May 23 14:11:38 antiX12base kernel: [ 15.597794] input: PC Speaker as /devices/platform/pcspkr/input/input0
May 23 14:11:38 antiX12base kernel: [ 16.965762] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/input/input1
May 23 14:11:38 antiX12base kernel: [ 18.902801] EXT3-fs (sda1): using internal journal
May 23 14:11:38 antiX12base kernel: [ 19.006864] aufs: module is from the staging directory, the quality is unknown, you have been warned.
May 23 14:11:38 antiX12base kernel: [ 19.024065] aufs 3.2-20120312
May 23 14:11:38 antiX12base kernel: [ 19.988611] usb 3-1: USB disconnect, device number 2
May 23 14:11:38 antiX12base kernel: [ 23.509779] usb 3-1: new high-speed USB device number 3 using ehci_hcd
May 23 14:11:38 antiX12base kernel: [ 23.647595] usb 3-1: New USB device found, idVendor=19d2, idProduct=0117
May 23 14:11:38 antiX12base kernel: [ 23.647730] usb 3-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
May 23 14:11:38 antiX12base kernel: [ 23.647853] usb 3-1: Product: ZTE WCDMA Technologies MSM
May 23 14:11:38 antiX12base kernel: [ 23.647962] usb 3-1: Manufacturer: ZTE,Incorporated
May 23 14:11:38 antiX12base kernel: [ 23.648071] usb 3-1: SerialNumber: P680A1ZTED010000
May 23 14:11:38 antiX12base kernel: [ 23.667351] scsi3 : usb-storage 3-1:1.3
May 23 14:11:38 antiX12base kernel: [ 23.825065] usbcore: registered new interface driver usbserial
May 23 14:11:38 antiX12base kernel: [ 23.825331] USB Serial support registered for generic
May 23 14:11:38 antiX12base kernel: [ 23.827677] usbcore: registered new interface driver usbserial_generic
May 23 14:11:38 antiX12base kernel: [ 23.827777] usbserial: USB Serial Driver core
May 23 14:11:38 antiX12base kernel: [ 23.886151] USB Serial support registered for GSM modem (1-port)
May 23 14:11:38 antiX12base kernel: [ 23.888558] option 3-1:1.0: GSM modem (1-port) converter detected
May 23 14:11:38 antiX12base kernel: [ 23.895160] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
May 23 14:11:38 antiX12base kernel: [ 23.895505] option 3-1:1.1: GSM modem (1-port) converter detected
May 23 14:11:38 antiX12base kernel: [ 23.904753] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
May 23 14:11:38 antiX12base kernel: [ 23.905108] option 3-1:1.2: GSM modem (1-port) converter detected
May 23 14:11:38 antiX12base kernel: [ 23.921681] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
May 23 14:11:38 antiX12base kernel: [ 23.927569] usbcore: registered new interface driver option
May 23 14:11:38 antiX12base kernel: [ 23.927665] option: v0.7.2:USB Driver for GSM modems
May 23 14:11:38 antiX12base kernel: [ 24.026049] fuse init (API version 7.17)
May 23 14:11:38 antiX12base kernel: [ 24.310200] eth0: link UP - 100/full
May 23 14:11:38 antiX12base kernel: [ 24.674261] scsi 3:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
May 23 14:11:38 antiX12base kernel: [ 24.675328] scsi 3:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
May 23 14:11:38 antiX12base kernel: [ 24.691912] sr0: scsi-1 drive
May 23 14:11:38 antiX12base kernel: [ 24.718559] sd 3:0:0:1: [sdb] Attached SCSI removable disk
May 23 14:12:49 antiX12base pppd[2386]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
May 23 14:12:49 antiX12base kernel: [ 99.092686] PPP generic driver version 2.4.2
May 23 14:12:49 antiX12base pppd[2386]: pppd 2.4.5 started by root, uid 0
May 23 14:12:49 antiX12base pppd[2386]: Using interface ppp0
May 23 14:12:49 antiX12base pppd[2386]: Connect: ppp0 <--> /dev/ttyUSB2
May 23 14:12:49 antiX12base pppd[2386]: CHAP authentication succeeded
May 23 14:12:49 antiX12base pppd[2386]: CHAP authentication succeeded
May 23 14:12:49 antiX12base kernel: [ 99.272720] PPP BSD Compression module registered
May 23 14:12:49 antiX12base kernel: [ 99.319239] PPP Deflate Compression module registered
May 23 14:12:54 antiX12base pppd[2386]: Could not determine remote IP address: defaulting to 10.64.64.64
May 23 14:12:54 antiX12base pppd[2386]: local IP address 84.224.70.135
May 23 14:12:54 antiX12base pppd[2386]: remote IP address 10.64.64.64
May 23 14:12:54 antiX12base pppd[2386]: primary DNS address 217.79.128.45
May 23 14:12:54 antiX12base pppd[2386]: secondary DNS address 217.79.128.40
May 23 14:37:02 antiX12base -- MARK --
_______________________________________________
networkmanager-list mailing list
networkmanager-list< at >gnome.org
https://mail.gnome.org/mailman/listinfo/networkmanager-list
</pre>PongráczI2012-05-23T13:07:23[PATCH 0/6] Bridging support v2
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21207
<pre>This series of patches adds bridging support to NM.
Thomas Graf (6):
utils: Move dev_valid_name() to libnm-utils and make it public
bridge: API to to create, delete, attach, and detach bridges
bridge: add bridging settings class (NMSettingBridge)
bridge: support bridging slaves
bridge: add bridge device type
bridge: nmcli support
cli/src/connections.c | 17 +-
cli/src/devices.c | 5 +
cli/src/settings.c | 48 ++
cli/src/settings.h | 2 +
docs/api/generate-settings-spec.c | 2 +
docs/libnm-glib/libnm-glib-docs.xml | 1 +
docs/libnm-glib/libnm-glib.types | 2 +
docs/libnm-util/libnm-util-docs.sgml | 1 +
include/NetworkManager.h | 4 +
introspection/Makefile.am | 1 +
introspection/all.xml.in | 1 +
introspection/nm-device-bridge.xml | 27 +
introspection/nm-device.xml | 5 +
libnm-glib/Makefile.am | 2 +
libnm-glib/libnm-glib.ver | 6 +
libnm-glib/nm-device-bridge.c | 301 +++++++++++
libnm-glib/nm-device-bridge.h | 82 +++
libnm-glib/nm-device.c | 3 +
libnm-util/Makefile.am | 2 +
libnm-util/libnm-util.ver | 14 +
libnm-util/nm-connection.c | 25 +-
libnm-util/nm-connection.h | 2 +
libnm-util/nm-setting-bond.c | 27 +-
libnm-util/nm-setting-bridge.c | 557 +++++++++++++++++++
libnm-util/nm-setting-bridge.h | 105 ++++
libnm-util/nm-utils.c | 30 +
libnm-util/nm-utils.h | 2 +
src/Makefile.am | 6 +
src/nm-device-bridge.c | 560 ++++++++++++++++++++
src/nm-device-bridge.h | 65 +++
src/nm-device-wired.c | 3 +
src/nm-manager.c | 28 +-
src/nm-system.c | 247 +++++++++-
src/nm-system.h | 13 +
src/nm-udev-manager.c | 3 +
src/settings/plugins/ifcfg-rh/reader.c | 186 ++++++--
.../plugins/ifcfg-rh/tests/test-ifcfg-rh.c | 327 +++++++++++-
src/settings/plugins/ifcfg-rh/utils.c | 5 +-
src/settings/plugins/ifcfg-rh/writer.c | 55 ++
39 files changed, 2695 insertions(+), 77 deletions(-)
create mode 100644 introspection/nm-device-bridge.xml
create mode 100644 libnm-glib/nm-device-bridge.c
create mode 100644 libnm-glib/nm-device-bridge.h
create mode 100644 libnm-util/nm-setting-bridge.c
create mode 100644 libnm-util/nm-setting-bridge.h
create mode 100644 src/nm-device-bridge.c
create mode 100644 src/nm-device-bridge.h
</pre>Thomas Graf2012-05-23T14:19:24Little white window SECRET
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21203
<pre>Every now and again NM stops working,
and a little window appears in the middle of the screen
(in fact in the middle of all virtual desktops
on my Fedora-16/KDE laptop).
The window is entitled Secret,
and it has a space to enter a password.
But in fact it is impossible to write in the space provided,
even if one clicks "Show password".
I don't know what password is wanted, even if I could enter one.
I find the only thing to do when this happens is to reboot the laptop.
NM usually works OK after the reboot.
</pre>Timothy Murphy2012-05-23T09:02:00Best way to keep alive mobile connection + openvpn?
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21202
<pre>
Dear Guys,
We try to make a system, based on debian testing with MM 0.5.2, which is able to provide the following:
it connect automatically to the mobile broadband network using ZTE or Huawei usb modems,
it reconnects in any case, when the modem or the provider drops the connection,
it builds up the openvpn channel via the mobile broadband when ppp0 interface is available and working well
it can make it without any user interaction
note: there is gnome, but lightdm, fluxbox, policykit, network-manager, modem-manager, nm-applet, nmcli. Minimal system.
As I can see at this moment, we have to write our own control script, which controls at this moment only the 2G/3G connection:
checks gsm device is ready/available
checks the wwan is on or turn it on
nm-applet setup contains auto-connect for the connection
As in the last few days I found some strange issues with the stability of the mobile connection, I wonder how others solve this kind of problem?
Do you have any solution, recommendation? Of course the solution should be bullet-proof :)
Here is our basic control script. The mobile connection has Autoconnect checked.
Any better idea?
Thanks, István
------------ script runs as user with nopasswd sudo or as root -----------------
#!/bin/bash
gsm_status_log="/tmp/1wire_fs/gsm_status"
# What The Fuck indicator: 0: ok, 1: connecting, 2: turn on wwan, 3: there is no modem or unknown statu
WTF=0
SLEEPTIME=45 # 45 seconds between checks
while [ TRUE ] ; do
GSMSTATUS=`nmcli dev status | grep gsm | gawk '{print $3}'`
DATUM=`date +"%Y-%m-%d %H:%M"`
# echo "GSM_STATUS: $GSMSTATUS"
if [ "$GSMSTATUS" == "kapcsolódva" ]; then
if [ $WTF -ne 0 ] ; then
echo "$DATUM - GSM kapcsolódva." >> /var/log/gsm_status.log
WTF=0
fi
echo "UP" > $gsm_status_log
elif [ "$GSMSTATUS" == "kapcsolódás" ]; then
if [ $WTF -ne 1 ]; then
echo "$DATUM - GSM kapcsolódás folyamatban." >> /var/log/gsm_status.log
WTF=1
fi
echo "CONNECTING" > $gsm_status_log
else
if [ "$GSMSTATUS" == "leválasztva" ]; then
if [ $WTF -ne 2 ]; then
echo "$DATUM - GSM kapcsolódás indul." >> /var/log/gsm_status.log
WTF=2
fi
echo "RECONNECT" > $gsm_status_log
if [ `whoami` == "root" ]; then
nmcli nm wwan on
else
sudo nmcli nm wwan on
fi
else
if [ $WTF -ne 3 ]; then
echo "$DATUM - GSM nem található, vagy ismeretlen státusz: $GSMSTATUS" >> /var/log/gsm_status.log
WTF=3
fi
echo "UNKNOWN" > $gsm_status_log
fi
fi
sleep $SLEEPTIME
done
_______________________________________________
networkmanager-list mailing list
networkmanager-list< at >gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
</pre>PongráczI2012-05-23T07:16:02[RFC] [PATCH 0/4] Make the C network-manager-gnome applet as sexy asthe gnome-shell one
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21196
<pre>Hello, this is an intent to get the C GNOME applet to look nice:
i.e. have switches for each device. the patch is incomplete, but is
more a proof of concept than anything else.
you can see the result here:
http://core.evilgiggle.com/~xaiki/hacks/network-manager/new-nm-applet-sc.png
with a Dark GTK theme on the main screen, and the NO-theme theme in
the Xephyr.
in a nutshell:
+ Toggle button for each NMDevice (tested that it works for wireless
only)
+ a spinner when the device state is not stable (connecting,
disconnecting, searching,…)
[PATCH 1/4] reorder a bit the 'draw' signal hack
instead of drawing the label only, we draw in the menuitem cr, and
return FALSE to get the other widgets to draw, then we hookup 'draw'
on the label to inibit drawing there.
[PATCH 2/4] whitespace fixup
it was getting in my eyes all the time.
[PATCH 3/4] move creation of applet_menu_item_create_device_item_helper to it's own helper
this makes room for more complex widgets,
at this stage everything looks the same.
[PATCH 4/4] Add switches to the Applet menu
+ pass down the menu,
+ add to the menu in applet.c (factorizing 3 lines of identical code in
all the devices)
+ create a box with a spinner and a switch
+ hook up various signals so that the spinner and switch always
reflect the right state (yes, it's live)
+ implement toggle functions for the devices I could.
as said it's quite incomplete, on the graphical side:
+ there is some work to do to better the cairo hacks that make the font
look nice (and actually fall apart as soon as I set the menu item to
be sensitive)
+ there is a need for a size_request hack, with the current form of
the patch, there is a bit of floating space after the Network Name,
due to the fact that we actually allocate the correct size for the
label, but draw it some 25-30 pixels to the left.
I was looking for a way to disable a specific device, I really
expected NMDevice->disable(), or NMDevice->set_enabled(), but couldn't
find anything like that,
+ wired and bt need an implementation for the _toggle method (I couldn't find how to do that).
+ gsm and cdma need checking, and maybe a different _toggle method.
I haven't checked that this works with gtk < 3.2, I believe it doesn't
the switch was introduced in 3.0 if I'm not mistaken.
anyway, thanks for reading, tell me what you think
_______________________________________________
networkmanager-list mailing list
networkmanager-list< at >gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
</pre>Niv Sardi2012-05-21T23:03:44Not able to connect from CDMA2000 Modem from Network Managerconnection
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21186
<pre>
http://old.nabble.com/file/p33876035/kern.log kern.log
http://old.nabble.com/file/p33876035/lshal.log lshal.log
http://old.nabble.com/file/p33876035/m-tool.log m-tool.log
http://old.nabble.com/file/p33876035/searchusb.log searchusb.log
http://old.nabble.com/file/p33876035/syslog.log syslog.log
http://old.nabble.com/file/p33876035/usb-info.txt usb-info.txt
I have trouble connecting my modem through Network Manager. The modem is
given by Indian Government Telco. BSNL. I have attached logs as asked
https://wiki.ubuntu.com/NetworkManager/Hardware/3G/Probing here . Please
help me to get this device supported. I use Ubuntu OS in my system and don't
want to migrate to Windows.
Reproduced issue on 12.04 also.
Thanks for your time and help...:)
</pre>ezee2012-05-20T03:45:50[PATCH] Use /128 as prefix length for IA_NA assignments
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21179
<pre>DHCPv6 IA_NA assignments do not contain a prefix length, they are for a
single address (/128) only. However, the ISC DHCPv6 client incorrectly
assumes IA_NA assignments come with a implicit prefix length of /64, and
passes this incorrect information on to NetworkManager, which adds this
prefix as a on-link route. This will cause communication failures in
certain networks, for example NBMA networks, and in organisations using
longer prefix lengths than /64 for their LANs. For more discussion
regarding this problem, see RFC 5942 section 5.
This patch makes NM ignore the false prefix length attribute provided by
the ISC DHCPv6 client, instead setting it to a /128 (single address) in
all cases. Note that this does not preclude an on-link prefix from being
added by NM if it is being advertised in the correct way, i.e., by
including a Prefix Information Option with the L flag set in an ICMPv6
Router Advertisement.
Fixes: bgo #656610, debian #661885
For what it's worth I've also sent a patch to ISC to change the hard-
coded implicit prefix length value from /64 to /128 in [ISC-Bugs #29468].
---
src/dhcp-manager/nm-dhcp-client.c | 26 ++++++--------------------
1 files changed, 6 insertions(+), 20 deletions(-)
diff --git a/src/dhcp-manager/nm-dhcp-client.c b/src/dhcp-manager/nm-dhcp-client.c
index f6fec0a..6a4b5ea 100644
--- a/src/dhcp-manager/nm-dhcp-client.c
+++ b/src/dhcp-manager/nm-dhcp-client.c
< at >< at > -1244,7 +1244,12 < at >< at > ip6_options_to_config (NMDHCPClient *self)
}
nm_ip6_address_set_address (addr, &tmp_addr);
-nm_log_info (LOGD_DHCP6, " address %s", str);
+/* DHCPv6 IA_NA assignments are single address only */
+nm_ip6_address_set_prefix (addr, (guint32) 128);
+nm_log_info (LOGD_DHCP6, " address %s/128", str);
+
+nm_ip6_config_take_address (ip6_config, addr);
+addr = NULL;
} else {
/* No address in managed mode is a hard error */
if (priv->info_only == FALSE)
< at >< at > -1255,25 +1260,6 < at >< at > ip6_options_to_config (NMDHCPClient *self)
addr = NULL;
}
-/* Only care about prefix if we got an address */
-if (addr) {
-str = g_hash_table_lookup (priv->options, "new_ip6_prefixlen");
-if (str) {
-long unsigned int prefix;
-
-errno = 0;
-prefix = strtoul (str, NULL, 10);
-if (errno != 0 || prefix > 128)
-goto error;
-
-nm_ip6_address_set_prefix (addr, (guint32) prefix);
-nm_log_info (LOGD_DHCP6, " prefix %lu", prefix);
-}
-
-nm_ip6_config_take_address (ip6_config, addr);
-addr = NULL;
-}
-
str = g_hash_table_lookup (priv->options, "new_host_name");
if (str)
nm_log_info (LOGD_DHCP6, " hostname '%s'", str);
</pre>Tore Anderson2012-05-19T14:02:42Debian testing + MM 0.5.2 + Huawei
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21173
<pre>
Hi,
I upgraded my debian based system (antix) today and I got MM 0.5.2 .
My problem, seems modemmanager has issue with this modem, because it "restart" over and over again and cannot identify modem.
Details:
Bus 001 Device 002: ID 12d1:1c05 Huawei Technologies Co., Ltd. E173s 3G broadband stick (modem on)
Modemmanager output (debug log, this part repeating again and again, continuously):
[main.c:167] main(): ModemManager (version 0.5.2.0) starting...
[mm-manager.c:120] load_plugin(): Loaded plugin MotoC
[mm-manager.c:120] load_plugin(): Loaded plugin ZTE
[mm-manager.c:120] load_plugin(): Loaded plugin Gobi
[mm-manager.c:120] load_plugin(): Loaded plugin SimTech
[mm-manager.c:120] load_plugin(): Loaded plugin Option High-Speed
[mm-manager.c:120] load_plugin(): Loaded plugin Huawei
[mm-manager.c:120] load_plugin(): Loaded plugin AnyData
[mm-manager.c:120] load_plugin(): Loaded plugin Sierra
[mm-manager.c:120] load_plugin(): Loaded plugin Nokia
[mm-manager.c:120] load_plugin(): Loaded plugin Option
[mm-manager.c:120] load_plugin(): Loaded plugin Samsung
[mm-manager.c:120] load_plugin(): Loaded plugin Ericsson MBM
[mm-manager.c:120] load_plugin(): Loaded plugin X22X
[mm-manager.c:120] load_plugin(): Loaded plugin Generic
[mm-manager.c:120] load_plugin(): Loaded plugin Linktop
[mm-manager.c:120] load_plugin(): Loaded plugin Wavecom
[mm-manager.c:120] load_plugin(): Loaded plugin Cinterion
[mm-manager.c:120] load_plugin(): Loaded plugin Novatel
[mm-manager.c:120] load_plugin(): Loaded plugin Longcheer
[mm-manager.c:491] try_supports_port(): (Huawei): (ttyUSB1) deferring support check
[mm-manager.c:491] try_supports_port(): (Huawei): (ttyUSB2) deferring support check
[mm-manager.c:809] device_added(): (tty/ttyS0): port's parent platform driver is not whitelisted
[mm-manager.c:809] device_added(): (tty/ttyS1): port's parent platform driver is not whitelisted
[mm-manager.c:809] device_added(): (tty/ttyS2): port's parent platform driver is not whitelisted
[mm-manager.c:809] device_added(): (tty/ttyS3): port's parent platform driver is not whitelisted
[mm-serial-port.c:741] mm_serial_port_open(): (ttyUSB0) opening serial port...
[mm-serial-port.c:810] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open)
[mm-plugin-base.c:859] try_open(): (ttyUSB0): probe requested by plugin 'Huawei'
[mm-at-serial-port.c:333] debug_log(): (ttyUSB0): --> 'AT+GCAP'
[mm-at-serial-port.c:333] debug_log(): (ttyUSB0): [mm-at-serial-port.c:333] debug_log(): (ttyUSB0): +GCAP: +CGSM,+DS,+ESOK'
[mm-serial-port.c:844] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close)
[mm-serial-port.c:859] mm_serial_port_close(): (ttyUSB0) closing serial port...
[mm-serial-port.c:880] mm_serial_port_close(): (ttyUSB0) serial port closed
[main.c:167] main(): ModemManager (version 0.5.2.0) starting...
[mm-manager.c:120] load_plugin(): Loaded plugin MotoC.........
/var/log/messages
May 18 22:12:55 localhost kernel: [ 4.094733] usbcore: registered new interface driver usbserial
May 18 22:12:55 localhost kernel: [ 4.094892] USB Serial support registered for generic
May 18 22:12:55 localhost kernel: [ 4.095148] usbcore: registered new interface driver usbserial_generic
May 18 22:12:55 localhost kernel: [ 4.095236] usbserial: USB Serial Driver core
May 18 22:12:55 localhost kernel: [ 4.178926] USB Serial support registered for GSM modem (1-port)
May 18 22:12:55 localhost kernel: [ 4.179251] option 1-2:1.0: GSM modem (1-port) converter detected
May 18 22:12:55 localhost kernel: [ 4.244635] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
May 18 22:12:55 localhost kernel: [ 4.244850] option 1-2:1.1: GSM modem (1-port) converter detected
May 18 22:12:55 localhost kernel: [ 4.245289] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
May 18 22:12:55 localhost kernel: [ 4.245468] option 1-2:1.2: GSM modem (1-port) converter detected
May 18 22:12:55 localhost kernel: [ 4.247837] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
May 18 22:12:55 localhost kernel: [ 4.248400] usbcore: registered new interface driver option
May 18 22:12:55 localhost kernel: [ 4.248501] option: v0.7.2:USB Driver for GSM modems
nmcli
root< at >debian :~# nmcli dev
ESZKÖZ TÍPUS ÁLLAPOT
eth0 802-3-ethernet unmanaged
root< at >debian :~#
nmcli nm
root< at >debian :~# nmcli nm
FUT ÁLLAPOT WIFI-HARDVER WIFI WWAN-HARDVER WWAN
run unattached enabled enabled enabld disabled
cannot enable wwan, nothing happens for nmcli nm wwan on
Any idea what to check?
Thank you, István
_______________________________________________
networkmanager-list mailing list
networkmanager-list< at >gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
</pre>PongráczI2012-05-18T20:46:20mm_serial_port_queue_process: (ttyUSB2) response array is notempty.....
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21169
<pre>
Hi,
I found this in my logs, a huge amount:
May 18 07:52:40 localhost modem-manager[1998]: mm_serial_port_queue_process: (ttyUSB2) response array is not empty when using cached reply, cleaning up 26 bytes
May 18 07:52:56 localhost modem-manager[1998]: mm_serial_port_queue_process: (ttyUSB2) response array is not empty when using cached reply, cleaning up 26 bytes
May 18 07:53:08 localhost modem-manager[1998]: mm_serial_port_queue_process: (ttyUSB2) response array is not empty when using cached reply, cleaning up 13 bytes
May 18 07:53:13 localhost modem-manager[1998]: mm_serial_port_queue_process: (ttyUSB2) response array is not empty when using cached reply, cleaning up 26 bytes
May 18 07:53:19 localhost modem-manager[1998]: mm_serial_port_queue_process: (ttyUSB2) response array is not empty when using cached reply, cleaning up 13 bytes
May 18 07:53:24 localhost modem-manager[1998]: mm_serial_port_queue_process: (ttyUSB2) response array is not empty when using cached reply, cleaning up 13 bytes
May 18 07:53:30 localhost modem-manager[1998]: mm_serial_port_queue_process: (ttyUSB2) response array is not empty when using cached reply, cleaning up 26 bytes
May 18 07:53:41 localhost modem-manager[1998]: mm_serial_port_queue_process: (ttyUSB2) response array is not empty when using cached reply, cleaning up 65 bytes
May 18 07:53:52 localhost modem-manager[1998]: mm_serial_port_queue_process: (ttyUSB2) response array is not empty when usingcached reply, cleaning up 13 bytes
What does it mean? I did not find any useful on the net.
Thank you, István
_______________________________________________
networkmanager-list mailing list
networkmanager-list< at >gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
</pre>PongráczI2012-05-18T12:52:12nm-applet und PolicyKit: ** (nm-applet:8913): WARNING **: Failed toadd/activate connection: (32) Insufficient privileges.
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21165
<pre>Dear NetworkManager folks,
when using nm-applet with an alternative window manager besides GNOME
there seems to be a problem that `polkit-gnome-authentication-agent-1`
is not started and therefore no new connections can be added [1][2].
Strangely
/etc/xdg/autostart/polkit-gnome-authentication-agent-1.desktop
contains
OnlyShowIn=GNOME;XFCE;Unity;
so the PolicyKit “wrapper” is not started for other window managers or
desktop environments than listed there.
This has the effect, that nm-applet does not work fully.
Besides that this problem should probably be fixed directly in
PolicyKit, could nm-applet warn, if the PolicyKit stuff is not setup
correctly, sot that the user has a clue what to look for. Currently only
the following message is displayed in a box.
Failed to add/activate connection: (32) Insufficient privileges.
Lastly, or am I mistaken and other window manager can provide a
PolicyKit alternative so they should not rely on
`polkit-gnome-authentication-agent-1.desktop`?
Thanks,
Paul
[1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=643028
[2] https://wiki.archlinux.org/index.php/NetworkManager#Set_up_PolicyKit_permissions
[3] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=643028#64
_______________________________________________
networkmanager-list mailing list
networkmanager-list< at >gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
</pre>Paul Menzel2012-05-17T17:40:01ifcfg-rh and wpa_supplicant
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21162
<pre>Hi,
I'm using Fedora16 and I'm trying to set up NetworkManager to connect
to a wlan on startup via /etc/sysconfig/network-scrip/ifcfg-wlan0 or
/etc/sysconfig/network-scrip/ifcfg-<ESSID>. It seems the settings in
/etc/sysconfig/wpa_supplicant are ignored if wpa_supplicant is managed
by the NetworkManager,but I don't see any option to pass the -D<driver>
option to wpa_supplicant.
How do I solve this ?
Thanks
</pre>Oncaphillis2012-05-17T07:58:02[PATCH] olpc-mesh: force use of WEXT
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21150
<pre>The libertas driver now uses nl80211 for mesh, and wifi-utils chooses to
use wifi-utils-nl80211.
The wifi-utils-nl80211 code does not have implementations for
mesh_get_channel/mesh_set_channel and this breaks mesh networking.
Adding these methods under nl80211 is a little painful.
For now, force use of wifi-utils-wext to restore mesh networking.
---
src/nm-device-olpc-mesh.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
I have written a set_mesh_channel implementation for nl80211 which
I think should work.
However, get_mesh_channel is harder: reading of the active channel in
nl80211 is done by reading scan results and looking for the network that
is marked as connected. The mesh device doesn't return scan results.
I think we could improve libertas to return always return a fake scan
result on the mesh device (with the expected SSID and channel details),
and also make it report itself as always connected.
Until I find a moment to try that approach, is this patch acceptable?
diff --git a/src/nm-device-olpc-mesh.c b/src/nm-device-olpc-mesh.c
index f6390c1..8e3cb95 100644
--- a/src/nm-device-olpc-mesh.c
+++ b/src/nm-device-olpc-mesh.c
< at >< at > -55,6 +55,9 < at >< at >
#include "nm-manager.h"
#include "nm-enum-types.h"
#include "wifi-utils.h"
+#if HAVE_WEXT
+#include "wifi-utils-wext.h"
+#endif
/* This is a bug; but we can't really change API now... */
#include "NetworkManagerVPN.h"
< at >< at > -153,9 +156,16 < at >< at > constructor (GType type,
nm_device_get_iface (NM_DEVICE (self)),
nm_device_get_ifindex (NM_DEVICE (self)));
-priv->wifi_data = wifi_utils_init (nm_device_get_iface (NM_DEVICE (self)),
- nm_device_get_ifindex (NM_DEVICE (self)),
- FALSE);
+/*
+ * The kernel driver now uses nl80211, but we force use of WEXT because
+ * the cfg80211 interactions are not quite ready to support access to
+ * mesh control through nl80211 just yet.
+ */
+#if HAVE_WEXT
+priv->wifi_data = wifi_wext_init (nm_device_get_iface (NM_DEVICE (self)),
+ nm_device_get_ifindex (NM_DEVICE (self)),
+ FALSE);
+#endif
if (priv->wifi_data == NULL) {
nm_log_warn (LOGD_HW | LOGD_OLPC_MESH, "(%s): failed to initialize WiFi driver",
nm_device_get_iface (NM_DEVICE (self)));
</pre>Daniel Drake2012-05-16T17:51:03NMIP4Config availability in NetworkManger.DeviceState.ACTIVATED
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21144
<pre>Hi,
I am trying to get NMIP4Config object after device becomes
NetworkManager.DeviceState.ACTIVATED but it is not
available immediately. Do I have to poll for it or is there any
event/state I can use?
Thanks,
Radek
_______________________________________________
networkmanager-list mailing list
networkmanager-list< at >gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
</pre>Radek Vykydal2012-05-14T15:12:53[PATCH 1/1] configure: fix libsoup check
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21141
<pre>---
configure.ac | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configure.ac b/configure.ac
index fe54b40..1330572 100644
--- a/configure.ac
+++ b/configure.ac
< at >< at > -692,7 +692,7 < at >< at > PKG_CHECK_MODULES(LIBSOUP, [libsoup-2.4 >= 2.26], [have_libsoup=yes],[have_libso
AC_ARG_ENABLE(concheck, AS_HELP_STRING([--enable-concheck], [enable connectivity checking support]),
[enable_concheck=${enableval}], [enable_concheck=${have_libsoup}])
if (test "${enable_concheck}" = "yes"); then
-if test x"$have_concheck" = x"no"; then
+if test x"$have_libsoup" = x"no"; then
AC_MSG_ERROR(Connectivity checking requires libsoup development headers)
fi
AC_SUBST(LIBSOUP_CFLAGS)
</pre>Thomas Bechtold2012-05-13T09:16:44Wireless disabled by hardware
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21140
<pre>I'm using ubuntu 10.10. I can't connect to wifi. I've tried everything
(trust me, I REALLY read everything I could at forums and tried a thousand
times) but I just can't solve this problem. How can I enable my wifi again?
Thanks,
Felipe
_______________________________________________
networkmanager-list mailing list
networkmanager-list< at >gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
</pre>Felipe Alcubillas2012-05-12T21:56:24Trying to convert an old hand-rolled bonding configuration toNetworkManager
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21139
<pre>For a while now I've had my ethernet and wifi devices bonded in
active-backup mode, such that (on my home network, where they're
bridged) I can seamlessly unplug and retain my IP address and all
active connections, losing only speed. I've installed the latest
NetworkManager from git, and I'm trying to replicate this setup with
NM. I run Arch, which installed a NetworkManager.conf that uses the
keyfile plugin. There doesn't seem to be any documentation describing
the use of anything but the ifcfg-rh plugin - can this even be
expected to work?
I have a bonding connection set up with type=bond, and a bond section
in its config:
[bond]
interface-name=bond0
mode=active-backup
But nm-cli reports the mode as balance-rr. Similarly, the slave
devices have connections set up with master=bond0 and slave-type=bond.
These seem to work, in that I get the expected error if I try to apply
any IP configuration to the slaves directly, but I can see that NM
tries to bring up the master without ever enslaving the slave
interfaces, and DHCP fails since it has no slaves.
Is there something I'm missing? The keyfile plugin is supposed to
handle all possible options according to the documentation, but the
mapping between it and sample configurations for other plugins is not
always clear.
</pre>Andrew Mahone2012-05-12T07:59:16[PATCH 0/5] Bridging support
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21134
<pre>This is a first attempt to introduce bridging support. The activation of
the bridging device currently fails due to problems with the existing
dependency system. I wanted to post the patches anyway to give them
some exposure.
Thomas Graf (5):
utils: Move dev_valid_name() to libnm-utils and make it public
bridge: Functions to create, delete, attach, and detach bridges
bridge: add bridging settings class (NMSettingBridge)
bridge: support bridging components
bridge: add new bridging device type
docs/api/generate-settings-spec.c | 2 +
docs/libnm-glib/libnm-glib-docs.xml | 1 +
docs/libnm-glib/libnm-glib.types | 2 +
docs/libnm-util/libnm-util-docs.sgml | 1 +
include/NetworkManager.h | 4 +
introspection/Makefile.am | 1 +
introspection/all.xml.in | 1 +
introspection/nm-device-bridge.xml | 27 +
introspection/nm-device.xml | 5 +
libnm-glib/Makefile.am | 2 +
libnm-glib/libnm-glib.ver | 6 +
libnm-glib/nm-device-bridge.c | 302 +++++++++++
libnm-glib/nm-device-bridge.h | 82 +++
libnm-glib/nm-device.c | 2 +
libnm-util/Makefile.am | 2 +
libnm-util/libnm-util.ver | 14 +
libnm-util/nm-connection.c | 25 +-
libnm-util/nm-connection.h | 2 +
libnm-util/nm-setting-bond.c | 27 +-
libnm-util/nm-setting-bridge.c | 557 +++++++++++++++++++
libnm-util/nm-setting-bridge.h | 105 ++++
libnm-util/nm-utils.c | 30 +
libnm-util/nm-utils.h | 2 +
src/Makefile.am | 6 +
src/nm-device-bridge.c | 560 ++++++++++++++++++++
src/nm-device-bridge.h | 65 +++
src/nm-device-wired.c | 3 +
src/nm-manager.c | 28 +-
src/nm-system.c | 256 +++++++++-
src/nm-system.h | 13 +
src/nm-udev-manager.c | 3 +
src/settings/plugins/ifcfg-rh/reader.c | 186 ++++++--
.../plugins/ifcfg-rh/tests/test-ifcfg-rh.c | 327 +++++++++++-
src/settings/plugins/ifcfg-rh/utils.c | 5 +-
src/settings/plugins/ifcfg-rh/writer.c | 55 ++
35 files changed, 2634 insertions(+), 75 deletions(-)
create mode 100644 introspection/nm-device-bridge.xml
create mode 100644 libnm-glib/nm-device-bridge.c
create mode 100644 libnm-glib/nm-device-bridge.h
create mode 100644 libnm-util/nm-setting-bridge.c
create mode 100644 libnm-util/nm-setting-bridge.h
create mode 100644 src/nm-device-bridge.c
create mode 100644 src/nm-device-bridge.h
</pre>Thomas Graf2012-05-11T14:01:32help please!!!
http://comments.gmane.org/gmane.linux.network.networkmanager.devel/21130
<pre>Please, I need some help. I made a mistake and deleted the network manager from mi control panel on the top of mi Ubuntu 8...and I can't find anywhere it to replace it in the control panel.
...I'm not very smart in using my pc, but I am an Ubuntu fan !!!
Can somebody help me?????
Thanks
_______________________________________________
networkmanager-list mailing list
networkmanager-list< at >gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
</pre>Paulina Bórquez2012-05-08T02:45:13Search EngineSearch the mailing list at Gmanequery
http://search.gmane.org/?group=$group=gmane.linux.network.networkmanager.devel