http://blog.gmane.org/gmane.linux.drivers.dvb hourly 1 1901-01-01T00:00+00:00 http://gmane.org/img/gmane-25t.png http://gmane.org http://comments.gmane.org/gmane.linux.drivers.dvb/48465 <pre>Dear linux-dvb users, A long time ago, we've merged analog and digital ML's into just one list. As result, a new mailing list were created, at kernel.org facilities, meant to be used by those envolved on adding open source support on Linux for all sorts of radio, analog TV, digital TV and webcam support. The traffic at the video4linux and linux-dvb ML's were gradually moved to the new ML. However, still today, people sometimes send useful messages to this ML, believing that the list is still active. However, no developers are reading from this ML anymore, and any comments send to this ML will probably be just not read. The same were happening with video4linux ML. To avoid frustating people that are sending messages to this ML, I'm removing all subscribed users from this ML, and blocking and further subscriptions. If you're interested on Linux DVB, please use linux-media&lt; at &gt;vger.kernel.org. To subscribe, all you need to do is to send a message to: majordomo&lt; at &gt;vger.kernel.org with "subscribe linux-media" at the mail body. More detailed info is available at: http://vger.kernel.org/vger-lists.html#linux-media Thanks! Mauro </pre> Mauro Carvalho Chehab 2011-06-03T13:26:55 http://comments.gmane.org/gmane.linux.drivers.dvb/48460 <pre>Want to use driver balutv_cs for moditel 1 it is 2011 and i think the driver now maybe done. but i don´t find the Driver od the man where made this driver. So please help me to contact this man. because i know he was in your system. but i´m german and i don`t understand your mail system </pre> Johannes Wünsche 2011-05-31T09:21:08 http://comments.gmane.org/gmane.linux.drivers.dvb/48453 <pre>Hi All, I need something but willing to help out! I just got my Terratec Cinergy C HD card. After relatively minor issues I got the card running on my Mandriva 2010.2 (kernel 2.6.33) myth box. But... I am getting my DVB-C signal from the Ziggo (former Casema) network. I found a post that claims that all channels are encrypted (except for Nederland 1). Even though these are the standard channels that you also get when you just have an analog subscription. So. I need CAM support. After a couple of nights swimming the net I come to the conclusion that a) CAM support is currently not implemented b) This support has been not implemented for quite some time c) There are more people that would like it to work... So, dear people, is anyone working on getting the CAM to work on the Terratec Cinergy C HD card, but having problems? Is there any way, shape or form that I can assist in getting this support done? Or have we given up on this card and should I just take my loss and go for another card... If so, which one? Thanks, Willem _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb </pre> Willem van Asperen 2011-05-27T19:48:04 http://comments.gmane.org/gmane.linux.drivers.dvb/48450 <pre>Hello, I tried to build the v4l-dvb on an ubuntu machine with kernel 2.6.38.8 generic and I get make error: ========================================= /home/z/media_build/v4l/kinect.c:38:19: error: ‘D_ERR’ undeclared here (not in a function) /home/z/media_build/v4l/kinect.c:38:27: error: ‘D_PROBE’ undeclared here (not in a function) /home/z/media_build/v4l/kinect.c:38:37: error: ‘D_CONF’ undeclared here (not in a function) /home/z/media_build/v4l/kinect.c:38:46: error: ‘D_STREAM’ undeclared here (not in a function) /home/z/media_build/v4l/kinect.c:38:57: error: ‘D_FRAM’ undeclared here (not in a function) /home/z/media_build/v4l/kinect.c:38:66: error: ‘D_PACK’ undeclared here (not in a function) /home/z/media_build/v4l/kinect.c:39:2: error: ‘D_USBI’ undeclared here (not in a function) /home//media_build/v4l/kinect.c:39:11: error: ‘D_USBO’ undeclared here (not in a function) /home//media_build/v4l/kinect.c:39:20: error: ‘D_V4L2′ undeclared here (not in a function) make[3]: *** [/home//media_build/v4l/kinect.o] Error 1 make[2]: *** [_module_/home//media_build/v4l] Error 2 ================================================================= _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb</pre> Giwrgos Panou 2011-05-23T10:09:43 http://comments.gmane.org/gmane.linux.drivers.dvb/48447 <pre>Hello All, I've tried to use my A306 board on my system. All the main chips are fully supported by linux. At this stage the CX23385 and the tuner: xc3028 seem to respond properly. But the DVB-T chip (af9013) is silent. Nevertheless both chips are visible on the I2C bus. I've no full datasheet of theses chips. with exception of the af9013 where this information is available: http://wenku.baidu.com/view/42240f72f242336c1eb95e08.html At this stage the CLK signal of the DVB-T chip may be missing or something is wrong elsewhere. If you have the datasheets... Any help will be appreciated. Best Regards, Wallak. diff -u -r -b -B -w -x '*.o' -x '*.cmd' -x '*.ko' -x '*.mod.c' -x 'modules.*' tmp/linux-2.6.37.6/drivers/media/common/tuners/tuner-xc2028.c linux-2.6.37.6-mdf/drivers/media/common/tuners/tuner-xc2028.c --- linux-2.6.37.6/drivers/media/common/tuners/tuner-xc2028.c2011-03-27 21:01:41.000000000 +0200 +++ linux-2.6.37.6-mdf/drivers/media/common/tuners/tuner-xc2028.c2011-05-07 23:30:20.000000000 +0200 &lt; at &gt;&lt; at &gt; -813,6 +813,10 &lt; at &gt;&lt; at &gt; hwmodel, (version &amp; 0xf000) &gt;&gt; 12, (version &amp; 0xf00) &gt;&gt; 8, (version &amp; 0xf0) &gt;&gt; 4, version &amp; 0xf); +{ + void af9013_execdebug(struct dvb_frontend *fe); + af9013_execdebug(fe); +} if (priv-&gt;ctrl.read_not_reliable) goto read_not_reliable; diff -u -r -b -B -w -x '*.o' -x '*.cmd' -x '*.ko' -x '*.mod.c' -x 'modules.*' tmp/linux-2.6.37.6/drivers/media/dvb/frontends/af9013.c linux-2.6.37.6-mdf/drivers/media/dvb/frontends/af9013.c --- linux-2.6.37.6/drivers/media/dvb/frontends/af9013.c2011-03-27 21:01:41.000000000 +0200 +++ linux-2.6.37.6-mdf/drivers/media/dvb/frontends/af9013.c2011-05-15 02:58:34.000000000 +0200 &lt; at &gt;&lt; at &gt; -69,6 +69,8 &lt; at &gt;&lt; at &gt; buf[2] = mbox; memcpy(&amp;buf[3], val, len); +printk(KERN_DEBUG "af9013_write_regs(%02x, %02x %02x %02x)\n",state-&gt;config.demod_address,buf[0],buf[1],buf[2]); + if (i2c_transfer(state-&gt;i2c, &amp;msg, 1) != 1) { warn("I2C write failed reg:%04x len:%d", reg, len); return -EREMOTEIO; &lt; at &gt;&lt; at &gt; -119,6 +121,10 &lt; at &gt;&lt; at &gt; warn("I2C read failed reg:%04x", reg); return -EREMOTEIO; } + + printk(KERN_DEBUG "af9013_read_reg(%02x, %02x %02x %02x) =%02x\n",state-&gt;config.demod_address,reg &gt;&gt; 8,reg &amp; 0xff, 0, ibuf[0]); + + *val = ibuf[0]; return 0; } &lt; at &gt;&lt; at &gt; -1448,6 +1454,22 &lt; at &gt;&lt; at &gt; kfree(state); } +void af9013_execdebug(struct dvb_frontend *fe) +{ + struct af9013_state *state = fe-&gt;demodulator_priv; + u8 val; + u8 buf[4]; + int ret, i; + + ret = af9013_read_reg(state, 0x98be, &amp;val); + printk(KERN_DEBUG "(0x0c) running = %02x, ret=%02x\n",val, ret); + + ret = af9013_read_reg_bits(state, 0xd733, 4, 4, &amp;buf[2]); + for (i = 0; i &lt; 2; i++) { ret = af9013_read_reg(state, 0x116b + i, &amp;buf[i]); } + printk(KERN_DEBUG "%s: chip version:%d ROM version:%d.%d (ret=%d)\n", __func__, buf[2], buf[0], buf[1], ret); +} +EXPORT_SYMBOL(af9013_execdebug); + static struct dvb_frontend_ops af9013_ops; struct dvb_frontend *af9013_attach(const struct af9013_config *config, &lt; at &gt;&lt; at &gt; -1484,7 +1506,18 &lt; at &gt;&lt; at &gt; if (state-&gt;config.output_mode != AF9013_OUTPUT_MODE_USB) { ret = af9013_download_firmware(state); if (ret) -goto error; + { + deb_info("%s: continue...\n", __func__); + + /* create dvb_frontend */ + memcpy(&amp;state-&gt;frontend.ops, &amp;af9013_ops, + sizeof(struct dvb_frontend_ops)); + state-&gt;frontend.demodulator_priv = state; + + return &amp;state-&gt;frontend; + + //goto error; + } } /* firmware version */ diff -u -r -b -B -w -x '*.o' -x '*.cmd' -x '*.ko' -x '*.mod.c' -x 'modules.*' tmp/linux-2.6.37.6/drivers/media/video/cx23885/cx23885-cards.c linux-2.6.37.6-mdf/drivers/media/video/cx23885/cx23885-cards.c --- linux-2.6.37.6/drivers/media/video/cx23885/cx23885-cards.c2011-03-27 21:01:41.000000000 +0200 +++ linux-2.6.37.6-mdf/drivers/media/video/cx23885/cx23885-cards.c2011-05-15 04:12:20.000000000 +0200 &lt; at &gt;&lt; at &gt; -275,6 +275,10 &lt; at &gt;&lt; at &gt; .name= "Compro VideoMate E800", .portc= CX23885_MPEG_DVB, }, +[CX23885_BOARD_AVERMEDIA_A306] = { +.name= "Avermedia A306", +.portc= CX23885_MPEG_DVB, +}, [CX23885_BOARD_HAUPPAUGE_HVR1290] = { .name= "Hauppauge WinTV-HVR1290", .portc= CX23885_MPEG_DVB, &lt; at &gt;&lt; at &gt; -485,6 +489,10 &lt; at &gt;&lt; at &gt; .subdevice = 0xe800, .card = CX23885_BOARD_COMPRO_VIDEOMATE_E800, }, { + .subvendor = 0x1461, +.subdevice = 0xc139, +.card = CX23885_BOARD_AVERMEDIA_A306, +}, { .subvendor = 0x0070, .subdevice = 0x8551, .card = CX23885_BOARD_HAUPPAUGE_HVR1290, &lt; at &gt;&lt; at &gt; -967,6 +975,31 &lt; at &gt;&lt; at &gt; /* CX24228 GPIO */ /* Connected to IF / Mux */ break; +case CX23885_BOARD_AVERMEDIA_A306: + // ?? PIO0: 1:on 0:nothing work + // ?? PIO1: demodulator address 1: 0x1c, 0:0x1d ?? + // ?? PIO2: tuner reset ? + // ?? PIO3: demodulator reset ? + printk(KERN_INFO "gpio...\n"); + + cx_set(GP0_IO, 0x000f0000); + mdelay(100); + cx_clear(GP0_IO, 0x0000000f); + mdelay(100); + + + cx_set(GP0_IO, 0x000f0000 | (1&lt;&lt;3) | (1&lt;&lt;2) | (1&lt;&lt;1) | (0&lt;&lt;0)); + mdelay(100); + //cx_clear(GP0_IO, 0x00000000 | (1&lt;&lt;3) | (1&lt;&lt;2)); + cx_set(GP0_IO, 0x000f0000 | (1&lt;&lt;3) | (0&lt;&lt;2) | (1&lt;&lt;1) | (0&lt;&lt;0)); + mdelay(100); + cx_set(GP0_IO, 0x000f0000 | (1&lt;&lt;3) | (0&lt;&lt;2) | (1&lt;&lt;1) | (1&lt;&lt;0)); + //cx_clear(GP0_IO, 0x0000000f); + //cx_set(GP0_IO, 0x00000003); + //cx_clear(GP0_IO, 0x00000002); + mdelay(100); + + break; } } &lt; at &gt;&lt; at &gt; -1012,6 +1045,7 &lt; at &gt;&lt; at &gt; case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: case CX23885_BOARD_HAUPPAUGE_HVR1210: +case CX23885_BOARD_AVERMEDIA_A306: /* FIXME: Implement me */ break; case CX23885_BOARD_HAUPPAUGE_HVR1850: &lt; at &gt;&lt; at &gt; -1258,6 +1292,7 &lt; at &gt;&lt; at &gt; /* AUX-PLL 27MHz CLK */ switch (dev-&gt;board) { case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + //case CX23885_BOARD_AVERMEDIA_A306: netup_initialize(dev); break; } diff -u -r -b -B -w -x '*.o' -x '*.cmd' -x '*.ko' -x '*.mod.c' -x 'modules.*' tmp/linux-2.6.37.6/drivers/media/video/cx23885/cx23885-dvb.c linux-2.6.37.6-mdf/drivers/media/video/cx23885/cx23885-dvb.c --- linux-2.6.37.6/drivers/media/video/cx23885/cx23885-dvb.c2011-03-27 21:01:41.000000000 +0200 +++ linux-2.6.37.6-mdf/drivers/media/video/cx23885/cx23885-dvb.c2011-05-15 04:03:54.000000000 +0200 &lt; at &gt;&lt; at &gt; -48,6 +48,7 &lt; at &gt;&lt; at &gt; #include "stv0900.h" #include "stv0900_reg.h" #include "stv6110.h" +#include "af9013.h" #include "lnbh24.h" #include "cx24116.h" #include "cimax2.h" &lt; at &gt;&lt; at &gt; -571,6 +572,14 &lt; at &gt;&lt; at &gt; .osc_clk = 20 }; +static struct af9013_config af9013_config = { + .demod_address = (0x1c &lt;&lt; 1), /* #define AF9015_I2C_DEMOD 0x38 */ /*0x1c or 0x1d*/ + .output_mode = AF9013_OUTPUT_MODE_PARALLEL, + .api_version = { 0, 1, 9, 0 }, + /*.gpio[0] = AF9013_GPIO_TUNER_ON, + .gpio[1] = AF9013_GPIO_LO,*/ +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port-&gt;dev; &lt; at &gt;&lt; at &gt; -966,6 +975,34 &lt; at &gt;&lt; at &gt; break; } break; +case CX23885_BOARD_AVERMEDIA_A306: + printk("# %d\n", port-&gt;nr - 1); + i2c_bus = &amp;dev-&gt;i2c_bus[0]; + + fe0-&gt;dvb.frontend = dvb_attach(af9013_attach, + &amp;af9013_config, + &amp;i2c_bus-&gt;i2c_adap); + + if (fe0-&gt;dvb.frontend != NULL || 1) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &amp;dev-&gt;i2c_bus[1].i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456 /*XC3028_FE_OREN538: Loading SCODE for type=DTV6 ATSC OREN538 SCODE HAS_IF_5580 (60110020)*/, + }; + + printk(KERN_INFO "xc2028_attach %p\n", fe0-&gt;dvb.frontend); + fe = dvb_attach(xc2028_attach, fe0-&gt;dvb.frontend, &amp;cfg); + printk(KERN_INFO "xc2028_attach %p\n", fe); + if (fe != NULL &amp;&amp; fe-&gt;ops.tuner_ops.set_config != NULL) { + fe-&gt;ops.tuner_ops.set_config(fe, &amp;ctl); + } + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " diff -u -r -b -B -w -x '*.o' -x '*.cmd' -x '*.ko' -x '*.mod.c' -x 'modules.*' tmp/linux-2.6.37.6/drivers/media/video/cx23885/cx23885.h linux-2.6.37.6-mdf/drivers/media/video/cx23885/cx23885.h --- linux-2.6.37.6/drivers/media/video/cx23885/cx23885.h2011-03-27 21:01:41.000000000 +0200 +++ linux-2.6.37.6-mdf/drivers/media/video/cx23885/cx23885.h2011-05-05 02:58:01.000000000 +0200 &lt; at &gt;&lt; at &gt; -84,6 +84,7 &lt; at &gt;&lt; at &gt; #define CX23885_BOARD_HAUPPAUGE_HVR1290 26 #define CX23885_BOARD_MYGICA_X8558PRO 27 #define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28 +#define CX23885_BOARD_AVERMEDIA_A306 29 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb </pre> wallak< at >free.fr 2011-05-19T20:48:48 http://comments.gmane.org/gmane.linux.drivers.dvb/48445 <pre>Could somebody add this to the set of scan's initial scanning files? I'm guessing the name of the file should be something along the lines of dk-Aarhus-AarhusAntenneforening. # freq sr fec mod C 346000000 6900000 AUTO QAM64 Cheers /Darren _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb</pre> Darren Black 2011-05-14T17:00:50 http://comments.gmane.org/gmane.linux.drivers.dvb/48438 <pre>Hello All, I'm trying to set up a TeVii S470 DVB-S2 card for use in my MythTV system running on Fedora 13. I already have a couple of TT S-1401 cards in that machine, and it works fine. I copied the firmware for my S470 as described on the Wiki page. The card is detected and seem to work. I am able to watch existing channels, and even found some DVB-S2 transponders. But the machine is very unstable. After a while, I get a lot of errors in my /var/log/messages , like: May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xb2(error=-5) May 3 22:35:51 localhost kernel: ds3000_writereg: writereg error(err == -5, reg == 0x03, value == 0x11) May 3 22:35:51 localhost kernel: ds3000_tuner_writereg: writereg error(err == -5, reg == 0x42, value == 0x73) May 3 22:35:51 localhost kernel: ds3000_writereg: writereg error(err == -5, reg == 0x03, value == 0x11) May 3 22:35:51 localhost kernel: ds3000_tuner_writereg: writereg error(err == -5, reg == 0x05, value == 0x01) May 3 22:35:51 localhost kernel: ds3000_writereg: writereg error(err == -5, reg == 0x03, value == 0x11) May 3 22:35:51 localhost kernel: ds3000_tuner_writereg: writereg error(err == -5, reg == 0x62, value == 0xf5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) May 3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5) There are a lot of lines like these in the log (tens or even hundreds per second). And at some point the machine just freezes - stops responding completely. It happens even if I'm not watching anything. If I take the S470 out, my machine works just fine again. Some more info from the log - perhaps something could be useful: May 2 20:39:15 localhost kernel: Linux video capture interface: v2.00 May 2 20:39:15 localhost kernel: cx23885 driver version 0.0.2 loaded May 2 20:39:15 localhost kernel: cx23885 0000:04:00.0: PCI INT A -&gt; GSI 18 (level, low) -&gt; IRQ 18 May 2 20:39:15 localhost kernel: LNBx2x attached on addr=8 May 2 20:39:15 localhost kernel: DVB: registering adapter 0 frontend 0 (Philips TDA10086 DVB-S)... May 2 20:39:15 localhost kernel: budget dvb 0000:06:02.0: PCI INT A -&gt; GSI 18 (level, low) -&gt; IRQ 18 May 2 20:39:15 localhost kernel: CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected] May 2 20:39:15 localhost kernel: IRQ 18/: IRQF_DISABLED is not guaranteed on shared IRQs May 2 20:39:15 localhost kernel: saa7146: found saa7146 &lt; at &gt; mem fb3f4800 (revision 1, irq 18) (0x13c2,0x1018). May 2 20:39:15 localhost kernel: saa7146 (1): dma buffer size 192512 May 2 20:39:15 localhost kernel: DVB: registering new adapter (TT-Budget-S-1401 PCI) May 2 20:39:15 localhost kernel: adapter has MAC addr = 00:d0:5c:0b:01:2d May 2 20:39:15 localhost kernel: LNBx2x attached on addr=8 May 2 20:39:15 localhost kernel: DVB: registering adapter 1 frontend 0 (Philips TDA10086 DVB-S)... May 2 20:39:15 localhost kernel: cx23885_dvb_register() allocating 1 frontend(s) May 2 20:39:15 localhost kernel: cx23885[0]: cx23885 based dvb card May 2 20:39:15 localhost kernel: DS3000 chip version: 0.192 attached. May 2 20:39:15 localhost kernel: DVB: registering new adapter (cx23885[0]) May 2 20:39:15 localhost kernel: DVB: registering adapter 2 frontend 0 (Montage Technology DS3000/TS2020)... May 2 20:39:15 localhost kernel: cx23885_dev_checkrevision() Hardware revision = 0xb0 May 2 20:39:15 localhost kernel: cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xfe800000 May 2 20:39:15 localhost kernel: IRQ 18/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs # uname -a Linux mythbackend 2.6.34.8-68.fc13.i686.PAE #1 SMP Thu Feb 17 14:54:10 UTC 2011 i686 i686 i386 GNU/Linux # I searched the Net and found a similar question that was raised some time ago, but there was not even a discussion on this topic... If someone else has the same DVB-S card - please share your experience! I'd appreciate any ideas! </pre> Andrew Junev 2011-05-05T17:38:06 http://comments.gmane.org/gmane.linux.drivers.dvb/48436 <pre>Hi, How can I help (I'm not pro, It's only a hobby for me..:P) to get AverTV Volar Video Capture (H830D) to work on linux? Or can someone help me make it work? Is it necessary to make a module for it from scratch? I can't find the firmware anywhere, is it necessary? I can't find any .bin file to begin with...Is it even possible for linux to support it? Thanks in advance and keep the fantastic work you've done Unkuiri _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb </pre> Manuel Carona 2011-05-02T19:37:36 http://comments.gmane.org/gmane.linux.drivers.dvb/48435 <pre>OK, think I might be getting somewhere... I've been able to have szap put out something sensible looking: [user&lt; at &gt;vortexbox ~]$ dvbtune -f 1183000 -s 22500 -p h -m Using DVB card "Conexant CX24123/CX24109" tuning DVB-S to L-Band:0, Pol:H Srate=22500000, 22kHz=off ERROR setting tone : Invalid argument polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Bit error rate: 0 Signal strength: 61952 SNR: 58030 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC FE READ UNCORRECTED BLOCKS: : Operation not supported Signal=61952, Verror=0, SNR=57861dB, BlockErrors=0, (S|L|C|V|SY|) FE READ UNCORRECTED BLOCKS: : Operation not supported Signal=61952, Verror=0, SNR=57426dB, BlockErrors=0, (S|L|C|V|SY|) FE READ UNCORRECTED BLOCKS: : Operation not supported Signal=61952, Verror=0, SNR=57853dB, BlockErrors=0, (S|L|C|V|SY|) ^C [user&lt; at &gt;vortexbox ~]$ dvbtune -f 1183000 -s 22500 -p h -m 2&gt;/dev/null &amp; [1] 27306 [user&lt; at &gt;vortexbox ~]$ scandvb -cva 0 -U -o zap using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' PAT PMT 0x1100 for service 0xfffe PMT 0x0056 for service 0x233e PMT 0x010f for service 0x0776 PMT 0x0111 for service 0x0775 PMT 0x010c for service 0x0774 PMT 0x010b for service 0x0770 PMT 0x0110 for service 0x040e PMT 0x010e for service 0x040c PMT 0x010d for service 0x040b PMT 0x010a for service 0x0401 SDT (actual TS) 0x0000 0x0775: pmt_pid 0x0111 Television New Zealand -- TV ONE (running) 0x0000 0x0401: pmt_pid 0x010a Maori Television Service -- Maori TV (running) 0x0000 0x040b: pmt_pid 0x010d Television New Zealand -- TV ONE (running) 0x0000 0x040c: pmt_pid 0x010e Television New Zealand -- TV2 (running) 0x0000 0x0776: pmt_pid 0x010f Television New Zealand -- TV ONE (running) 0x0000 0x040e: pmt_pid 0x0110 Television New Zealand -- TVNZ 7 (running) 0x0000 0x0774: pmt_pid 0x010c Television New Zealand Ltd. -- TV ONE (running) 0x0000 0x0770: pmt_pid 0x010b Television New Zealand -- U (running) 0x0000 0x233e: pmt_pid 0x0056 SKY -- TS 22 IEPG DATA SERVICE (running) NIT (actual TS) Network Name 'Freeview' dumping lists (10 services) Maori TV:12483:h:0:22500:514:652:1025 TV ONE:12483:h:0:22500:515:653:1035 TV2:12483:h:0:22500:516:654:1036 TVNZ 7:12483:h:0:22500:518:656:1038 U:12483:h:0:22500:512:650:1904 TV ONE:12483:h:0:22500:519:657:1908 TV ONE:12483:h:0:22500:513:651:1909 TV ONE:12483:h:0:22500:517:655:1910 TS 22 IEPG DATA SERVICE:12483:h:0:22500:0:0:9022 [000-fffe]:12483:h:0:22500:0:0:65534 Done. [user&lt; at &gt;vortexbox ~]$ scandvb -cva 0 -U -o zap &gt; channels.conf using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' PAT PMT 0x1100 for service 0xfffe PMT 0x0056 for service 0x233e PMT 0x010f for service 0x0776 PMT 0x0111 for service 0x0775 PMT 0x010c for service 0x0774 PMT 0x010b for service 0x0770 PMT 0x0110 for service 0x040e PMT 0x010e for service 0x040c PMT 0x010d for service 0x040b PMT 0x010a for service 0x0401 NIT (actual TS) Network Name 'Freeview' SDT (actual TS) 0x0000 0x0775: pmt_pid 0x0111 Television New Zealand -- TV ONE (running) 0x0000 0x0401: pmt_pid 0x010a Maori Television Service -- Maori TV (running) 0x0000 0x040b: pmt_pid 0x010d Television New Zealand -- TV ONE (running) 0x0000 0x040c: pmt_pid 0x010e Television New Zealand -- TV2 (running) 0x0000 0x0776: pmt_pid 0x010f Television New Zealand -- TV ONE (running) 0x0000 0x040e: pmt_pid 0x0110 Television New Zealand -- TVNZ 7 (running) 0x0000 0x0774: pmt_pid 0x010c Television New Zealand Ltd. -- TV ONE (running) 0x0000 0x0770: pmt_pid 0x010b Television New Zealand -- U (running) 0x0000 0x233e: pmt_pid 0x0056 SKY -- TS 22 IEPG DATA SERVICE (running) dumping lists (10 services) Done. [user&lt; at &gt;vortexbox ~]$ cp channels.conf ~/.szap/channels.conf [user&lt; at &gt;vortexbox ~]$ szap -r TV2 reading channels from file '/home/user/.szap/channels.conf' zapping to 3 'TV2': sat 0, frequency = 12483 MHz H, symbolrate 22500000, vpid = 0x0204, apid = 0x028e using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' opening frontend failed: Device or resource busy [user&lt; at &gt;vortexbox ~]$ fg dvbtune -f 1183000 -s 22500 -p h -m 2&gt; /dev/null ^C [user&lt; at &gt;vortexbox ~]$ szap -r TV2 reading channels from file '/home/user/.szap/channels.conf' zapping to 3 'TV2': sat 0, frequency = 12483 MHz H, symbolrate 22500000, vpid = 0x0204, apid = 0x028e using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 01 | signal fa00 | snr f772 | ber 00000000 | unc fffffffe | status 01 | signal 0f00 | snr a344 | ber 00000000 | unc fffffffe | status 01 | signal 0f00 | snr a423 | ber 00000000 | unc fffffffe | ... ... ... ^C [user&lt; at &gt;vortexbox ~]$ And, while szap -r TV2 is running, on another console I should be able to run mplayer? So: [user&lt; at &gt;vortexbox ~]$ mplayer -vo x11 /dev/dvb/adapter0/dvr0 MPlayer SVN-r33254-snapshot-4.5.1 (C) 2000-2011 MPlayer Team 162 audio &amp; 360 video codecs Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /dev/dvb/adapter0/dvr0. MPlayer interrupted by signal 2 in module: demux_open MPlayer interrupted by signal 2 in module: demux_open [user&lt; at &gt;vortexbox ~]$ But, nothing happens at Playing /dev/dvb/adapter0/dvr0. ... Where should I see what's playing? Thanks for listening, M _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb </pre> Morgan Read 2011-04-30T09:19:49 http://comments.gmane.org/gmane.linux.drivers.dvb/48434 <pre>Hello list I've been trying to connect to the Optus D1 satellite from NZ, and I'm tearing my hair out. There is no config file dvb-apps/dvb-s so I've constructed the following from: http://www.lyngsat.com/optusd1.html # Optus D1 satellite 160E # freq pol sr fec ### Freeview: DVB-S, Prime TV, Shine TV, C4, TV 3, Four, Stratos, Parliament TV, Cue TV, Te Reo, TV 3 +1 S 12456000 H 22500000 3/4 ### Freeview: DVB-S, Maori TV, TVNZ TV One Auckland, TVNZ TV 2, TVNZ7, TVNZ U, TVNZ TV One Hamilton, TVNZ TV One Wellington, TVNZ TV One Christchurch S 12483000 H 22500000 3/4 ### DVB-S2, Channel Nine, GEM, Go! S 12398000 V 11909000 2/3 ### SBS Tasmania: DVB-S, SBS One Tasmania, SBS Two Tasmania, SBS One Tasmania HD, SBS Radio Tasmania AM, SBS Radio Tasmania FM S 12648000 V 12600000 5/6 ### Sky New Zealand: DVB-S2 Videoguard S 12267000 H 22500000 2/3 S 12331000 H 22500000 2/3 S 12358000 H 22500000 2/3 ### SkyNew Zealand: DVB-S Videoguard S 12394000 H 22500000 3/4 S 12421000 H 22500000 3/4 ### Sky New Zealand: DVB-S Videoguard, Radio New Zealand National, Radio New Zealand Concert, Niu FM, Tahu FM S 12519000 H 22500000 3/4 ### Sky New Zealand: DVB-S Videoguard, Calvary Chapel Radio New Zealand S 12546000 H 22500000 3/4 ### Sky New Zealand: DVB-S Videoguard, The Edge FM S 12581000 H 22500000 3/4 ### Sky New Zealand: DVB-S Videoguard, Maori TV S 12608000 H 22500000 3/4 ### Sky New Zealand: DVB-S Videoguard S 12644000 H 22500000 3/4 ### Sky New Zealand: DVB-S Videoguard, TVNZ TV One, TVNZ TV 2, Trackside S 12671000 H 22500000 3/4 ### Sky New Zealand: DVB-S Videoguard S 12707000 H 22500000 3/4 S 12734000 H 22500000 3/4 It's heavily annotated with channel info, but if it could be included in dvb-apps/dvb-s I'm sure it could put somebody else out of the misery I've been suffering. If I run w_scan to search for channels it times out, but if I use dvbtune and scandvb I get some (but not all) channels discovered. See below. I feel like I'm flailing about in a dark pit, if anybody could help me out it would be much appreciated! Many thanks, Morgan. [vortexbox.lan ~]# w_scan -fs -s S160E0 -x w_scan version 20110206 (compiled for DVB API 5.2) using settings for 160.0 east Optus D1 frontend_type DVB-S, channellist 49 output format initial tuning data Info: using DVB adapter auto detection. /dev/dvb/adapter0/frontend0 -&gt; DVB-S "Conexant CX24123/CX24109": good :-) Using DVB-S frontend (adapter /dev/dvb/adapter0/frontend0) -_-_-_-_ Getting frontend capabilities-_-_-_-_ Using DVB API 5.2 frontend Conexant CX24123/CX24109 supports INVERSION_AUTO DVB-S using LNB "UNIVERSAL" -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 12331: skipped (no driver support) 12358: skipped (no driver support) (time: 00:00) (time: 00:03) ... (time: 01:16) (time: 01:19) ERROR: Sorry - i couldn't get any working frequency/transponder Nothing to scan!! [vortexbox.lan ~]# dvbtune -f 1183000 -s 22500 -p h -m Using DVB card "Conexant CX24123/CX24109" tuning DVB-S to L-Band:0, Pol:H Srate=22500000, 22kHz=off ERROR setting tone : Invalid argument polling.... Getting frontend event Overflow error, trying again (status = -1, errno = 75)FE_STATUS: polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Bit error rate: 0 Signal strength: 61952 SNR: 57884 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC FE READ UNCORRECTED BLOCKS: : Operation not supported Signal=61952, Verror=0, SNR=57609dB, BlockErrors=0, (S|L|C|V|SY|) FE READ UNCORRECTED BLOCKS: : Operation not supported Signal=61952, Verror=0, SNR=57473dB, BlockErrors=0, (S|L|C|V|SY|) FE READ UNCORRECTED BLOCKS: : Operation not supported Signal=61952, Verror=0, SNR=57835dB, BlockErrors=0, (S|L|C|V|SY|) FE READ UNCORRECTED BLOCKS: : Operation not supported Signal=61952, Verror=0, SNR=57681dB, BlockErrors=0, (S|L|C|V|SY|) ^C [vortexbox.lan ~]# dvbtune -f 1183000 -s 22500 -p h -m 2&gt;/dev/null &amp; [1] 17061 [vortexbox.lan ~]# scandvb -c -U using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' 0x0000 0x0775: pmt_pid 0x0111 Television New Zealand -- TV ONE (running) 0x0000 0x0401: pmt_pid 0x010a Maori Television Service -- Maori TV (running) 0x0000 0x040b: pmt_pid 0x010d Television New Zealand -- TV ONE (running) 0x0000 0x040c: pmt_pid 0x010e Television New Zealand -- TV2 (running) 0x0000 0x0776: pmt_pid 0x010f Television New Zealand -- TV ONE (running) 0x0000 0x040e: pmt_pid 0x0110 Television New Zealand -- TVNZ 7 (running) 0x0000 0x0774: pmt_pid 0x010c Television New Zealand Ltd. -- TV ONE (running) 0x0000 0x0770: pmt_pid 0x010b Television New Zealand -- U (running) 0x0000 0x233e: pmt_pid 0x0056 SKY -- TS 22 IEPG DATA SERVICE (running) dumping lists (10 services) Maori TV (0x0401) 01: PCR == V V 0x0202 A 0x028c TV ONE (0x040b) 01: PCR == V V 0x0203 A 0x028d 0x0297 (ita) TT 0x0243 TV2 (0x040c) 01: PCR == V V 0x0204 A 0x028e TT 0x0244 TVNZ 7 (0x040e) 01: PCR == V V 0x0206 A 0x0290 TT 0x0246 U (0x0770) 01: PCR == V V 0x0200 A 0x028a TT 0x0245 TV ONE (0x0774) 01: PCR == V V 0x0207 A 0x0291 TT 0x0243 TV ONE (0x0775) 01: PCR == V V 0x0201 A 0x028b TT 0x0243 TV ONE (0x0776) 01: PCR == V V 0x0205 A 0x028f TT 0x0243 TS 22 IEPG DATA SERVICE (0x233e) 83: [000-fffe] (0xfffe) 00: PCR 0x1fff Done. [vortexbox.lan ~]# fg dvbtune -f 1183000 -s 22500 -p h -m 2&gt; /dev/null ^C [vortexbox.lan ~]# _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb </pre> Morgan Read 2011-04-30T09:05:24 http://comments.gmane.org/gmane.linux.drivers.dvb/48433 <pre>Hi Please give me the Pach which the author used on the Wiki page http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_7010iX, or show me where I can find it. I compile SAA716x_hibrid driver but it not support my card. --------------------------------------------------------------- Darmowy program do wypełniania PIT: http://linkint.pl/f2931 _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb</pre> Tomasz Knura 2011-04-27T18:06:06 http://comments.gmane.org/gmane.linux.drivers.dvb/48432 <pre> I’m trying to get the DViCO FusionHDTV DVB-T Dual Express2 http://linuxtv.org/wiki/index.php/DViCO_FusionHDTV_DVB-T_Dual_Express2 to work with v4l I found what looks like most of the relevant information in dib0700_devices.c at line /*DIB7070 generic*/ however im not sure about the "dib7070p_tuner_attach" and "dib7070_set_param_override" configs as they refer to a usb adaptor dib0700 I have modified the following modules to load the card cx23885.h, cx23885-dvb.c &amp; cx23885-cards.c nicholas&lt; at &gt;Trial-Backend:~$ dmesg | grep -i dib [ 30.930887] DiB0070: successfully identified [ 30.930903] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... [ 31.420874] DiB0070: successfully identified [ 31.420890] DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)... nicholas&lt; at &gt;Trial-Backend:~$ dmesg | grep -i cx [ 29.869405] cx23885 driver version 0.0.2 loaded [ 29.881296] cx23885 0000:03:00.0: PCI INT A -&gt; Link[AE2A] -&gt; GSI 16 (level, low) -&gt; IRQ 16 [ 29.881552] CORE cx23885[0]: subsystem: 18ac:db98, board: DViCO FusionHDTV DVB-T Dual Express Rev2 [card=29,autodetected] [ 30.460772] ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-3/3-006b/ir0 [cx23885[0]] [ 30.462879] cx23885_dvb_register() allocating 1 frontend(s) [ 30.462886] cx23885[0]: cx23885 based dvb card [ 30.930896] DVB: registering new adapter (cx23885[0]) [ 30.932021] cx23885_dvb_register() allocating 1 frontend(s) [ 30.932028] cx23885[0]: cx23885 based dvb card [ 31.420885] DVB: registering new adapter (cx23885[0]) [ 31.421369] cx23885_dev_checkrevision() Hardware revision = 0xa5 [ 31.421379] cx23885[0]/0: found at 0000:03:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xfc000000 [ 31.421386] cx23885 0000:03:00.0: setting latency timer to 64 nicholas&lt; at &gt;Trial-Backend:~$ lspci 3:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 04) Subsystem: DViCO Corporation Device [18ac:db98] Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fc000000 (64-bit, non-prefetchable) [size=2M] Capabilities: &lt;access denied&gt; Kernel driver in use: cx23885 Kernel modules: cx23885 nicholas&lt; at &gt;Trial-Backend:~$ scan -c -a 0 -f 0 -d 0 -l 45000000,800000000 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 dumping lists (0 services) Done. --- cx23885.h 2011-04-06 00:21:42.000000000 +1000 +++ newcx23885.h 2011-04-06 09:38:48.000000000 +1000 &lt; at &gt;&lt; at &gt; -85,6 +85,7 &lt; at &gt;&lt; at &gt; #define CX23885_BOARD_HAUPPAUGE_HVR1290 26 #define CX23885_BOARD_MYGICA_X8558PRO 27 #define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28 +#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2 29 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 --- cx23885-cards.c 2011-04-06 00:21:42.000000000 +1000 +++ newcx23885-cards.c 2011-04-06 09:43:44.000000000 +1000 &lt; at &gt;&lt; at &gt; -300,6 +300,11 &lt; at &gt;&lt; at &gt; CX25840_COMPONENT_ON, } }, }, + [CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2] = { + .name = "DViCO FusionHDTV DVB-T Dual Express Rev2", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); &lt; at &gt;&lt; at &gt; -447,6 +452,10 &lt; at &gt;&lt; at &gt; .subvendor = 0x107d, .subdevice = 0x6f22, .card = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200, + }, { + .subvendor = 0x18ac, + .subdevice = 0xdb98, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); &lt; at &gt;&lt; at &gt; -653,6 +662,7 &lt; at &gt;&lt; at &gt; break; case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: /* Two identical tuners on two different i2c buses, * we need to reset the correct gpio. */ if (port-&gt;nr == 1) &lt; at &gt;&lt; at &gt; -784,6 +794,7 &lt; at &gt;&lt; at &gt; mdelay(20); cx_set(GP0_IO, 0x000f000f); break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: /* GPIO-0 portb xc3028 reset */ /* GPIO-1 portb zl10353 reset */ &lt; at &gt;&lt; at &gt; -942,6 +953,7 &lt; at &gt;&lt; at &gt; dev-&gt;sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR); dev-&gt;pci_irqmask |= PCI_MSK_IR; break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: request_module("ir-kbd-i2c"); break; &lt; at &gt;&lt; at &gt; -1011,6 +1023,7 &lt; at &gt;&lt; at &gt; } switch (dev-&gt;board) { + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: ts2-&gt;gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ --- cx23885-dvb.c 2011-04-06 00:21:42.000000000 +1000 +++ newcx23885-dvb.c 2011-04-20 22:35:32.000000000 +1000 &lt; at &gt;&lt; at &gt; -45,6 +45,7 &lt; at &gt;&lt; at &gt; #include "tuner-simple.h" #include "dib7000p.h" #include "dibx000_common.h" +#include "dib0070.h" #include "zl10353.h" #include "stv0900.h" #include "stv0900_reg.h" &lt; at &gt;&lt; at &gt; -77,6 +78,94 &lt; at &gt;&lt; at &gt; /* ------------------------------------------------------------------ */ +static struct dibx000_agc_config dib7070_agc_config = { + BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + (0 &lt;&lt; 15) | (0 &lt;&lt; 14) | (5 &lt;&lt; 11) | (0 &lt;&lt; 10) | (0 &lt;&lt; 9) | (0 &lt;&lt; 8) + | (3 &lt;&lt; 5) | (0 &lt;&lt; 4) | (5 &lt;&lt; 1) | (0 &lt;&lt; 0), + + 600, + 10, + + 0, + 118, + + 0, + 3530, + 1, + 5, + + 65535, + 0, + + 65535, + 0, + + 0, + 40, + 183, + 206, + 255, + 72, + 152, + 88, + 90, + + 17, + 27, + 23, + 51, + + 0, +}; + +static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) +{ + return dib7000p_set_gpio(fe, 8, 0, !onoff); +} + +static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + return 0; +} + +static struct dib0070_config dib7070p_dib0070_config ={ + + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib7070_tuner_reset, + .sleep = dib7070_tuner_sleep, + .clock_khz = 12000, + +}; + +static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { + 60000, 15000, + 1, 20, 3, 1, 0, + 0, 0, 1, 1, 2, + (3 &lt;&lt; 14) | (1 &lt;&lt; 12) | (524 &lt;&lt; 0), + (0 &lt;&lt; 25) | 0, + 20452225, + 12000000, +}; + +static struct dib7000p_config dib7070p_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &amp;dib7070_agc_config, + .bw = &amp;dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = 0xfcef, + .gpio_val = 0x0110, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, +}; + static int dvb_buf_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) { &lt; at &gt;&lt; at &gt; -760,6 +849,17 &lt; at &gt;&lt; at &gt; fe-&gt;ops.tuner_ops.set_config(fe, &amp;ctl); } break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: + i2c_bus = &amp;dev-&gt;i2c_bus[port-&gt;nr - 1]; + fe0-&gt;dvb.frontend = dvb_attach(dib7000p_attach, + &amp;i2c_bus-&gt;i2c_adap, + 0x12, &amp;dib7070p_dib7000p_config); + + if (fe0-&gt;dvb.frontend != NULL) + dvb_attach(dib0070_attach, fe0-&gt;dvb.frontend, + &amp;i2c_bus-&gt;i2c_adap, + &amp;dib7070p_dib0070_config); + break; case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: i2c_bus = &amp;dev-&gt;i2c_bus[port-&gt;nr - 1]; _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb</pre> Nicholas Leahy 2011-04-27T01:13:00 http://comments.gmane.org/gmane.linux.drivers.dvb/48430 <pre>Hi, I need to tune analog OTA channels from a pci-e card. I bought the following card: http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2200 (I actually have the 2250) after installing and downloading the firmware etc, this works fine when tuning the digital OTA signal that I can see locally. I am unsure how to change the frontend to attempt to tune analog tv input or even if this is supported, can someone point me in the right direction to do this? It looks like I would need to change the tuner type in the driver code (if analog is supported) I am aware that no analog broadcasts exist anymore in the US, but where this will eventually be used still has analog OTA broadcasts. My test setup for now includes a digital to analog converter, which i would like to tune with this card, once this works I would test with the actual OTA signal. Looking at the tuner chip on the card, suggests that it is possible. The link on the wiki for the chip is outdated it seems, this is what I found on the nxp site: http://www.nxp.com/#/pip/pip=[pip=TDA18271HD]|pp=[t=pip,i=TDA18271HD] I am happy to dive into the code, but wanted to see if anyone has done this already or get any suggestions that you more experienced developers could provide. Thanks, --mc _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb</pre> Martin Cole 2011-04-26T20:08:32 http://comments.gmane.org/gmane.linux.drivers.dvb/48427 <pre>Hi, i'm having problems with my new DVB-C device on UPC DVB-C network (encrypted using Conax CAM module): 05:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01) Subsystem: KNC One Device [1894:0022] Flags: bus master, medium devsel, latency 64, IRQ 16 Memory at ff700000 (32-bit, non-prefetchable) [size=512] Kernel driver in use: budget_av Kernel modules: budget-av As you can see, the device is detected and modules loaded : # ls -l /dev/dvb/adapter0 total 0 crw-rw---- 1 root video 212, 6 Apr 13 23:58 ca0 crw-rw---- 1 root video 212, 4 Apr 13 23:58 demux0 crw-rw---- 1 root video 212, 5 Apr 13 23:58 dvr0 crw-rw---- 1 root video 212, 3 Apr 13 23:58 frontend0 crw-rw---- 1 root video 212, 7 Apr 13 23:58 net0 # lsmod (i did cut out the unnecessary bits) Module Size Used by sbs 8885 0 sbshc 2712 1 sbs ipv6 244116 33 tda10023 5443 1 i915 515809 1 budget_av 18830 0 saa7146_vv 38879 1 budget_av drm_kms_helper 23711 1 i915 videodev 72530 1 saa7146_vv drm 144199 2 i915,drm_kms_helper videobuf_dma_sg 6848 1 saa7146_vv videobuf_core 13183 2 saa7146_vv,videobuf_dma_sg budget_core 5956 1 budget_av i2c_algo_bit 4304 1 i915 i2c_i801 6866 0 dvb_core 75119 2 budget_av,budget_core saa7146 12490 3 budget_av,saa7146_vv,budget_core serio_raw 3358 0 ttpci_eeprom 1364 1 budget_core r8169 34246 0 i2c_core 15854 11 lm75,tda10023,i915,budget_av,drm_kms_helper,videodev,drm,budget_core,i2c_algo_bit,i2c_i801,ttpci_eeprom dmesg: http://pastebin.com/uJDtLGYm The problem is that i can't even successfully scan for channels.To rule out hardware issue, first i tried to use it first with my Windows PC, it worked flawlessly (SD absolutely no problems, HD channels had some minor dropouts due the high bitrate). The result of scan for channels using GlobeTV (the Windows app) was this : http://pastebin.com/XNHvjAfb . Because i'm using a cable operator not listed in /usr/share/dvb files, i need to use w_scan and the result is something like this : http://pastebin.com/0fUS6Tzx . Because of those filter timeouts, it finds no channels using the same cable and card which had no problems on Windows and using the same cable which has no problems with the provided set top box from the cable operator. You might suggest me to use dvbsnoop, but only two commands which work are the signal and feinfo. pidscan returns nothing : # dvbsnoop -s signal dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/ --------------------------------------------------------- Transponder/Frequency signal strength statistics... --------------------------------------------------------- cycle: 1 d_time: 0.001 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 2 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 3 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 4 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 5 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 6 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 7 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 8 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 9 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 10 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 11 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 12 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 13 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 14 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 15 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 16 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 17 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 18 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 19 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 20 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 21 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 22 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 23 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 24 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 25 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 26 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 27 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 28 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 29 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 30 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 31 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 32 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 33 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 34 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 35 d_time: 0.008 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] cycle: 36 d_time: 0.007 s Sig: 65535 SNR: 65535 BER: 1019791 UBLK: -1886417009 Stat: 0x1f [SIG CARR VIT SYNC LOCK ] ... # dvbsnoop -s feinfo dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/ --------------------------------------------------------- FrontEnd Info... --------------------------------------------------------- Device: /dev/dvb/adapter0/frontend0 Basic capabilities: Name: "Philips TDA10023 DVB-C" Frontend-type: QAM (DVB-C) Frequency (min): 47000.000 kHz Frequency (max): 862000.000 kHz Frequency stepsiz: 62.500 kHz Frequency tolerance: 0.000 kHz Symbol rate (min): 0.451875 MSym/s Symbol rate (max): 7.230000 MSym/s Symbol rate tolerance: 0 ppm Notifier delay: 0 ms Frontend capabilities: auto inversion FEC AUTO QPSK QAM 16 QAM 32 QAM 64 QAM 128 QAM 256 Current parameters: Frequency: 362000.000 kHz Inversion: ON Symbol rate: 6.900000 MSym/s FEC: none Modulation: QAM 64 Tested using Arch Linux 2.6.37-ARCH and current 2.6.39-rc3 kernels, same result. Signal level according to the set top box is ~57%, signal quality is 97-99%, and as i mentoined, set top box works without problems, and even this DVB-C card using the same cable when using with Windows. Any ideas ? </pre> Frantisek Augusztin 2011-04-13T22:21:10 http://comments.gmane.org/gmane.linux.drivers.dvb/48426 <pre>Hello i have a Sony-Vaio VGN-AR31S with a Avermedia M115S ( hybrid-tuner). has anyone get this card working ? I have tried many tuners with saa7134 card=137 tuner=XX. But no tuner works/loads. The video-capture for Sony VCC4 cam (r5u87x) works perfect. The Vaio can not boot to any other operationg system like windows. Ubuntu/OpenSuse only works with kernel-params “nolapic”. Has anyone a hint or a tip for me? Best regards Sven _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb</pre> Sven Herrmann 2011-04-12T06:25:52 http://comments.gmane.org/gmane.linux.drivers.dvb/48424 <pre>Good day to you all. My question is simple: it would be possible to write a program like ndiswrapper for dvb drivers? Just think: only a small initial effort to write a program that can use hundreds of DVB drivers taken from the Windows world... _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb </pre> pigeonskiller< at >libero.it 2011-04-08T09:36:35 http://comments.gmane.org/gmane.linux.drivers.dvb/48423 <pre>Pinnacle PCTV Dual DVB-T Pro PCI 2000i (http://linuxtv.org/wiki/index.php/DVB- T_PCI_Cards#Pinnacle) was introduced in 2006 and after 5 years it is still unsupported in linux! Unbelievable! Yet its chips Zarlink ZL10353 (http://linuxtv.org/wiki/index. php/Zarlink_ZL10353) and Microtune MT2060 (http://linuxtv.org/wiki/index. php/Microtune_MT2060) are supported (http://www.linuxtv. org/downloads/drivers/linux-media-LATEST.tar.bz2)! So, what is missing? Probably this is the reason why Linux is not so widespread: LACK OF DRIVERS! And this is the reason why a lot of users cannot migrate to Linux and are forced to use that stupid O.S. called Win****! If anyone wants to have a look at Windows' drivers and is able to develop drivers (I'm not), here are the drivers: ftp://ftp.pctvsystems.com/TV/driver/PCTV%202000i/PCTV%20250i%202000i.zip Sorry for the outburst. A user wishing to migrate to Linux. _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb </pre> pigeonskiller< at >libero.it 2011-04-08T09:35:17 http://comments.gmane.org/gmane.linux.drivers.dvb/48422 <pre>Good day to you all. My question is simple: it would be possible to write a program like ndiswrapper for dvb drivers? Just think: only a small initial effort to write a program that can use hundreds of DVB drivers taken from the Windows world... _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb </pre> pigeonskiller< at >libero.it 2011-04-08T09:22:31 http://comments.gmane.org/gmane.linux.drivers.dvb/48416 <pre>Pinnacle PCTV Dual DVB-T Pro PCI 2000i (http://linuxtv.org/wiki/index.php/DVB- T_PCI_Cards#Pinnacle) was introduced in 2006 and after 5 years it is still unsupported in linux! Unbelievable! Yet its chips Zarlink ZL10353 (http://linuxtv.org/wiki/index. php/Zarlink_ZL10353) and Microtune MT2060 (http://linuxtv.org/wiki/index. php/Microtune_MT2060) are supported (http://www.linuxtv. org/downloads/drivers/linux-media-LATEST.tar.bz2)! So, what is missing? Probably this is the reason why Linux is not so widespread: LACK OF DRIVERS! And this is the reason why a lot of users cannot migrate to Linux and are forced to use that stupid O.S. called Win****! If anyone wants to have a look at Windows' drivers and is able to develop drivers (I'm not), here are the drivers: ftp://ftp.pctvsystems.com/TV/driver/PCTV%202000i/PCTV%20250i%202000i.zip Sorry for the outburst. A user wishing to migrate to Linux. _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb </pre> pigeonskiller< at >libero.it 2011-03-31T21:45:29 http://comments.gmane.org/gmane.linux.drivers.dvb/48414 <pre>Good evening, I got this card and it doesn't seem to be detected by Ubuntu 10.4.2 with kernel 2.6.35(-25-generic #44~lucid1-Ubuntu SMP Tue Jan 25 19:17:25 UTC 2011 x86_64 GNU/Linux) The wiki seems to indicate that this card is supported as of kernel 2.6.33, however it doesn't show up as a dvb-adapter. I checked if it is the same card as on the wiki and it seems to be looking at the device-id: 01:0a.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01) Subsystem: Device 1ae4:0002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium &gt;TAbort- &lt;TAbort- &lt;MAbort- &gt;SERR- &lt;PERR- INTx- Latency: 32 (2000ns min, 63750ns max) Interrupt: pin A routed to IRQ 15 Region 0: Memory at cbfff000 (32-bit, prefetchable) [size=4K] I performed "modprobe mantis" and it seems to load op the correct modules just fine: mantis 17985 0 mantis_core 33224 1 mantis tda665x 3446 1 mantis lnbp21 2338 1 mantis mb86a16 21798 1 mantis stb6100 7128 1 mantis tda10021 6920 1 mantis tda10023 6996 1 mantis zl10353 7817 1 mantis stb0899 36531 1 mantis stv0299 10593 1 mantis ir_core 16906 11 mantis_core,rc_hauppauge_new,ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,cx88xx,ir_common,ir_nec_decoder dvb_core 105399 5 mantis_core,stv0299,cx88_dvb,videobuf_dvb,dvb_usb After rebooting it however seems I need to manually modprobe mantis and restart the backend to have mythtv work with this card. Is there a way to make these modules load automatically after a reboot? Also for my DTV-provider there's no initial scanfile, I've managed to scan the channels by making my own initial scan file with: C 304000000 6875000 NONE QAM64 And am able to scan all the channels(which are unencrypted). So far so good, added the channels to mythtv after testing in Kaffeine, where they play near flawlessly in in Kaffeine however have heavy distortions in mythtv. The work-around seems to be to disable the C1E halt state on the Geforce 8200 motherboard I use. Is the wiki still active? So I can put my experiences there later on? Can I somehow submit the initial scan file to be used with Glashart in the Netherlands? Thanks in advance, Jos Hoekstra _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb </pre> Jos Hoekstra 2011-03-30T20:22:18 http://comments.gmane.org/gmane.linux.drivers.dvb/48410 <pre>In The Name Of Allah The compassionate merciful Good day all Hello; 1- I(humble) want alsa "forward" the sound from tvtime to hw:1,0 .How to map the analog output to the digital output using alsa ? 2 - I(humble) use this command to see a TV channel with VLC : vlc v4l2:///dev/video0 :input-slave=alsa://hw:1,0 :v4l2-standard=1 :v4l2-tuner-frequency=583250 OR mplayer -ao alsa -tv alsa:adevice=hw.1,0:immediatemode=0:forceaudio:chanlist=us-bcast tv:// How to create a list of channels (with different frequencies) in VLC or Mplayer? Regards dehqan _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media&lt; at &gt;vger.kernel.org linux-dvb&lt; at &gt;linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb</pre> a dehqan 2011-03-29T19:04:12 Search the mailing list at Gmane query http://search.gmane.org/?group=$group=gmane.linux.drivers.dvb