gmane.linux.drivers.bcm54xx.devel
http://blog.gmane.org/gmane.linux.drivers.bcm54xx.devel
hourly
1
1901-01-01T00:00+00:00
Gmane
http://gmane.org/img/gmane-25t.png
http://gmane.org
-
hi
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13920
<pre>Btw! I am having a look for husband!
</pre>
Amberly Cingolani
2013-06-15T11:06:13
-
hi
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13919
<pre>Hello there! Now I am having a look for husband!
</pre>
Frances Albanese
2013-06-14T10:29:38
-
BCM43362 support - possible ?
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13916
<pre>I have a client who is quite enthralled by some BCM43362-based
modules and wants to use them with a Free operating system
(probably FreeRTOS, but Linux may be a possibility as well, and
even more so as an intermediate development step). This chip is
from the WICED series.
As far as I can tell, the BCM43362 is not supported by Linux
at the moment and hasn't even been mentioned in that context.
So I wonder whether the existing brcmfmac driver could be made
to work with the BCM43362 or whether there are major technical
or licensing issues.
If necessary, I wouldn't mind helping (in a few weeks) to get
that chip to work under Linux.
Thanks !
- Werner
</pre>
Werner Almesberger
2013-06-11T15:05:18
-
No Bluetooth on 14e4:4315
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13915
<pre>It is not possible to use both bluetooth and wifi at the same time with
my 14e4:4315. I can use one or the other; for example I can boot and
then pair and communicate with a bluetooth device if I do not make use
of the wifi (includes scannning), but if I scan or associate with an AP
the bluetooth connection is immediately dropped and cannot be
reestablished, and though bluetooth commands can be issue they do not
appear to do anything. It is possible to maintain simultaneous
connections with the wl driver. Is this a known problem? Has there been
progress made on it?
Nathan
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel-0aAXYlwwYIJuHlm7Suoebg< at >public.gmane.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037d94000 (usable)
[ 0.000000] BIOS-e820: 0000000037d94000 - 0000000037dbf000 (reserved)
[ 0.000000] BIOS-e820: 0000000037dbf000 - 0000000037e57000 (usable)
[ 0.000000] BIOS-e820: 0000000037e57000 - 0000000037ebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037ebf000 - 0000000037eed000 (usable)
[ 0.000000] BIOS-e820: 0000000037eed000 - 0000000037eff000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037eff000 - 0000000037f00000 (usable)
[ 0.000000] BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fa000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed21000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fef00000 - 00000000fef10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Mini 311-1100/3651, BIOS F.12 11/07/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x37f00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask 0FFE00000 write-protect
[ 0.000000] 1 base 000000000 mask 0E0000000 write-back
[ 0.000000] 2 base 020000000 mask 0E0000000 write-back
[ 0.000000] 3 base 03FF00000 mask 0FFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 < at > 19f9000-1a00000
[ 0.000000] RAMDISK: 371b2000 - 3745c000
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 37efe120 0005C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 37efd000 000F4 (v04 HP SLIC-MPC 00000003 MSFT 01000013)
[ 0.000000] ACPI: DSDT 37eef000 09CEF (v01 HP SLIC-MPC F0000000 MSFT 01000013)
[ 0.000000] ACPI: FACS 37e61000 00040
[ 0.000000] ACPI: APIC 37efc000 00084 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 37efb000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 37efa000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDRT 37ef9000 00047 (v01 HPQOEM SLIC-MPC 00000000 MSFT 01000013)
[ 0.000000] ACPI: SLIC 37eee000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 37eed000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 5MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00037f00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00037d94
[ 0.000000] 0: 0x00037dbf -> 0x00037e57
[ 0.000000] 0: 0x00037ebf -> 0x00037eed
[ 0.000000] 0: 0x00037eff -> 0x00037f00
[ 0.000000] On node 0 totalpages: 228842
[ 0.000000] free_area_init_node: node 0, pgdat c1412600, node_mem_map f6ab2200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 11 pages used for memmap
[ 0.000000] HighMem zone: 1106 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b8000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu < at >f79bf000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227051
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=e56cf2a1-bdf7-48e3-8862-a30b19b8cf69 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:00037f00)
[ 0.000000] Memory: 899196k/916480k available (2847k kernel code, 16172k reserved, 1352k data, 416k init, 4468k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141a000 - 0xc1482000 ( 416 kB)
[ 0.000000] .data : 0xc12c7e00 - 0xc1419f40 (1352 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c7e00 (2847 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f6406000 soft=f6408000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1599.947 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.89 BogoMIPS (lpj=6399788)
[ 0.004134] pid_max: default: 32768 minimum: 301
[ 0.004283] Security Framework initialized
[ 0.004350] AppArmor: AppArmor disabled by boot time parameter
[ 0.004449] Mount-cache hash table entries: 512
[ 0.004746] Initializing cgroup subsys cpuacct
[ 0.004820] Initializing cgroup subsys memory
[ 0.004896] Initializing cgroup subsys devices
[ 0.004960] Initializing cgroup subsys freezer
[ 0.005024] Initializing cgroup subsys net_cls
[ 0.005088] Initializing cgroup subsys blkio
[ 0.005160] Initializing cgroup subsys perf_event
[ 0.005272] Disabled fast string operations
[ 0.005339] CPU: Physical Processor ID: 0
[ 0.005401] CPU: Processor Core ID: 0
[ 0.008011] mce: CPU supports 5 MCE banks
[ 0.008083] CPU0: Thermal monitoring enabled (TM2)
[ 0.008148] using mwait in idle threads.
[ 0.008763] ACPI: Core revision 20110623
[ 0.028109] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028665] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068873] CPU0: Intel(R) Atom(TM) CPU N270 < at > 1.60GHz stepping 02
[ 0.072003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.072003] ... version: 3
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] CPU 1 irqstacks, hard=f64f2000 soft=f64f4000
[ 0.072003] Booting Node 0, Processors #1
[ 0.072003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.164072] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.164321] Brought up 2 CPUs
[ 0.164388] Total of 2 processors activated (6399.80 BogoMIPS).
[ 0.165092] devtmpfs: initialized
[ 0.165092] PM: Registering ACPI NVS region at 37e57000 (425984 bytes)
[ 0.165092] print_constraints: dummy:
[ 0.165092] NET: Registered protocol family 16
[ 0.165092] ACPI: bus type pci registered
[ 0.165270] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
[ 0.165352] PCI: MMCONFIG at [mem 0xf8000000-0xf9ffffff] reserved in E820
[ 0.165418] PCI: Using MMCONFIG for extended config space
[ 0.165482] PCI: Using configuration type 1 for base access
[ 0.169205] bio: create slab <bio-0> at 0
[ 0.169205] ACPI: Added _OSI(Module Device)
[ 0.169205] ACPI: Added _OSI(Processor Device)
[ 0.169205] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.169205] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.174622] ACPI: EC: Look up EC in DSDT
[ 0.179397] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.187356] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.188559] ACPI: SSDT 37d97c90 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.189834] ACPI: Dynamic OEM Table Load:
[ 0.189992] ACPI: SSDT (null) 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.190473] ACPI: SSDT 37d96e10 001C1 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.191698] ACPI: Dynamic OEM Table Load:
[ 0.191855] ACPI: SSDT (null) 001C1 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.216677] ACPI: SSDT 37d97f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.217927] ACPI: Dynamic OEM Table Load:
[ 0.218082] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.218534] ACPI: SSDT 37d95f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.219760] ACPI: Dynamic OEM Table Load:
[ 0.219917] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.248273] ACPI: Interpreter enabled
[ 0.248351] ACPI: (supports S0 S3 S4 S5)
[ 0.248659] ACPI: Using IOAPIC for interrupt routing
[ 0.283639] ACPI: EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
[ 0.284597] ACPI: No dock devices found.
[ 0.284662] HEST: Table not found.
[ 0.284730] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.292504] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.293188] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.293258] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.293326] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.293400] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.293476] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.293552] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.293628] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.293704] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.293781] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.293857] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.293933] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.294009] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.294083] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.294159] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.294236] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.294312] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
[ 0.294388] pci_root PNP0A08:00: host bridge window [mem 0xfa000000-0xfebfffff]
[ 0.294465] pci_root PNP0A08:00: host bridge window [mem 0xfff00000-0xffffffff]
[ 0.294554] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
[ 0.294668] pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
[ 0.294795] pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
[ 0.294971] pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
[ 0.295048] pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
[ 0.295164] pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
[ 0.295186] pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf]
[ 0.295219] pci 0000:00:03.2: reg 20: [io 0x3040-0x307f]
[ 0.295232] pci 0000:00:03.2: reg 24: [io 0x3000-0x303f]
[ 0.295279] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.295314] pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
[ 0.295488] pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
[ 0.295515] pci 0000:00:03.5: reg 10: [mem 0xfeb80000-0xfebfffff]
[ 0.295662] pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
[ 0.295682] pci 0000:00:04.0: reg 10: [mem 0x53108000-0x53108fff]
[ 0.295749] pci 0000:00:04.0: supports D1 D2
[ 0.295755] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.295786] pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
[ 0.296784] pci 0000:00:04.1: reg 10: [mem 0x53109200-0x531092ff]
[ 0.306320] pci 0000:00:04.1: supports D1 D2
[ 0.306327] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306368] pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
[ 0.306388] pci 0000:00:06.0: reg 10: [mem 0x53107000-0x53107fff]
[ 0.306455] pci 0000:00:06.0: supports D1 D2
[ 0.306461] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306493] pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
[ 0.308018] pci 0000:00:06.1: reg 10: [mem 0x53109100-0x531091ff]
[ 0.316816] pci 0000:00:06.1: supports D1 D2
[ 0.316823] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316863] pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
[ 0.316883] pci 0000:00:08.0: reg 10: [mem 0x53100000-0x53103fff]
[ 0.316951] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.316980] pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
[ 0.317051] pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
[ 0.317070] pci 0000:00:0a.0: reg 10: [mem 0x53106000-0x53106fff]
[ 0.317083] pci 0000:00:0a.0: reg 14: [io 0x30e0-0x30e7]
[ 0.317095] pci 0000:00:0a.0: reg 18: [mem 0x53109000-0x531090ff]
[ 0.317108] pci 0000:00:0a.0: reg 1c: [mem 0x53109300-0x5310930f]
[ 0.317157] pci 0000:00:0a.0: supports D1 D2
[ 0.317163] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.317195] pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106
[ 0.317216] pci 0000:00:0b.0: reg 10: [io 0x30d8-0x30df]
[ 0.317228] pci 0000:00:0b.0: reg 14: [io 0x30ec-0x30ef]
[ 0.317240] pci 0000:00:0b.0: reg 18: [io 0x30d0-0x30d7]
[ 0.317252] pci 0000:00:0b.0: reg 1c: [io 0x30e8-0x30eb]
[ 0.317264] pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf]
[ 0.317276] pci 0000:00:0b.0: reg 24: [mem 0x53104000-0x53105fff]
[ 0.317351] pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
[ 0.317413] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.317487] pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
[ 0.317733] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.317833] pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
[ 0.318078] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.318207] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.318283] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.318291] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.318298] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.318306] pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.318313] pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.318321] pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.318328] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.318336] pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.318343] pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.318351] pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.318358] pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.318366] pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.318373] pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.318381] pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.318389] pci 0000:00:09.0: bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
[ 0.318396] pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfebfffff] (subtractive decode)
[ 0.318404] pci 0000:00:09.0: bridge window [mem 0xfff00000-0xffffffff] (subtractive decode)
[ 0.318462] pci 0000:02:00.0: [10de:087f] type 0 class 0x000300
[ 0.318486] pci 0000:02:00.0: reg 10: [mem 0x52000000-0x52ffffff]
[ 0.318505] pci 0000:02:00.0: reg 14: [mem 0x40000000-0x4fffffff 64bit pref]
[ 0.318524] pci 0000:02:00.0: reg 1c: [mem 0x50000000-0x51ffffff 64bit pref]
[ 0.318538] pci 0000:02:00.0: reg 24: [io 0x2000-0x207f]
[ 0.318552] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.318632] pci 0000:00:10.0: PCI bridge to [bus 02-02]
[ 0.318702] pci 0000:00:10.0: bridge window [io 0x2000-0x2fff]
[ 0.318710] pci 0000:00:10.0: bridge window [mem 0x52000000-0x52ffffff]
[ 0.318720] pci 0000:00:10.0: bridge window [mem 0x40000000-0x51ffffff 64bit pref]
[ 0.318970] pci 0000:03:00.0: [14e4:4315] type 0 class 0x000280
[ 0.319035] pci 0000:03:00.0: reg 10: [mem 0x53000000-0x53003fff 64bit]
[ 0.319355] pci 0000:03:00.0: supports D1 D2
[ 0.324104] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.324190] pci 0000:00:15.0: bridge window [mem 0x53000000-0x530fffff]
[ 0.324360] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[ 0.324494] pci_bus 0000:00: on NUMA node 0
[ 0.324503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.325339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.325745] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.326160] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.326238] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.343225] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.343899] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.344557] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.345224] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.345997] ACPI: PCI Interrupt Link [LX0A] (IRQs 16) *0, disabled.
[ 0.346528] ACPI: PCI Interrupt Link [LX0B] (IRQs 16) *0, disabled.
[ 0.347058] ACPI: PCI Interrupt Link [LX0C] (IRQs 16) *0, disabled.
[ 0.347588] ACPI: PCI Interrupt Link [LX0D] (IRQs 16) *0, disabled.
[ 0.348171] ACPI: PCI Interrupt Link [LX1A] (IRQs 16) *0, disabled.
[ 0.348706] ACPI: PCI Interrupt Link [LX1B] (IRQs 16) *0, disabled.
[ 0.349236] ACPI: PCI Interrupt Link [LX1C] (IRQs 16) *0, disabled.
[ 0.349766] ACPI: PCI Interrupt Link [LX1D] (IRQs 16) *0, disabled.
[ 0.350294] ACPI: PCI Interrupt Link [LX2A] (IRQs 16) *0, disabled.
[ 0.350822] ACPI: PCI Interrupt Link [LX2B] (IRQs 16) *0, disabled.
[ 0.351350] ACPI: PCI Interrupt Link [LX2C] (IRQs 16) *0, disabled.
[ 0.351880] ACPI: PCI Interrupt Link [LX2D] (IRQs 16) *0, disabled.
[ 0.352413] ACPI: PCI Interrupt Link [LX3A] (IRQs 16) *11
[ 0.352897] ACPI: PCI Interrupt Link [LX3B] (IRQs 16) *0, disabled.
[ 0.353425] ACPI: PCI Interrupt Link [LX3C] (IRQs 16) *0, disabled.
[ 0.353954] ACPI: PCI Interrupt Link [LX3D] (IRQs 16) *0, disabled.
[ 0.354482] ACPI: PCI Interrupt Link [LX4A] (IRQs 16) *0, disabled.
[ 0.355013] ACPI: PCI Interrupt Link [LX4B] (IRQs 16) *0, disabled.
[ 0.355545] ACPI: PCI Interrupt Link [LX4C] (IRQs 16) *0, disabled.
[ 0.356105] ACPI: PCI Interrupt Link [LX4D] (IRQs 16) *0, disabled.
[ 0.356650] ACPI: PCI Interrupt Link [LX5A] (IRQs 16) *0, disabled.
[ 0.357178] ACPI: PCI Interrupt Link [LX5B] (IRQs 16) *0, disabled.
[ 0.357706] ACPI: PCI Interrupt Link [LX5C] (IRQs 16) *0, disabled.
[ 0.358234] ACPI: PCI Interrupt Link [LX5D] (IRQs 16) *0, disabled.
[ 0.358766] ACPI: PCI Interrupt Link [LX6A] (IRQs 16) *0, disabled.
[ 0.359301] ACPI: PCI Interrupt Link [LX6B] (IRQs 16) *0, disabled.
[ 0.359833] ACPI: PCI Interrupt Link [LX6C] (IRQs 16) *0, disabled.
[ 0.360372] ACPI: PCI Interrupt Link [LX6D] (IRQs 16) *0, disabled.
[ 0.360799] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.361471] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 *10 11 14 15)
[ 0.362050] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 10 11 14 15)
[ 0.362724] ACPI: PCI Interrupt Link [LUBB] (IRQs 20 21 22 23) *7
[ 0.363252] ACPI: PCI Interrupt Link [LUBC] (IRQs 5 7 10 *11 14 15)
[ 0.363918] ACPI: PCI Interrupt Link [LUBD] (IRQs 20 21 22 23) *11
[ 0.364456] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 10 11 14 *15)
[ 0.365034] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 *11 14 15)
[ 0.365602] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.366275] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 *11 14 15)
[ 0.366842] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 10 *11 14 15)
[ 0.367516] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.368072] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.368604] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.369135] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.369666] ACPI: PCI Interrupt Link [AX0A] (IRQs 16) *0, disabled.
[ 0.370202] ACPI: PCI Interrupt Link [AX0B] (IRQs 16) *0, disabled.
[ 0.370733] ACPI: PCI Interrupt Link [AX0C] (IRQs 16) *0, disabled.
[ 0.371261] ACPI: PCI Interrupt Link [AX0D] (IRQs 16) *0, disabled.
[ 0.371790] ACPI: PCI Interrupt Link [AX1A] (IRQs 16) *0, disabled.
[ 0.372324] ACPI: PCI Interrupt Link [AX1B] (IRQs 16) *0, disabled.
[ 0.372856] ACPI: PCI Interrupt Link [AX1C] (IRQs 16) *0, disabled.
[ 0.373389] ACPI: PCI Interrupt Link [AX1D] (IRQs 16) *0, disabled.
[ 0.373920] ACPI: PCI Interrupt Link [AX2A] (IRQs 16) *0, disabled.
[ 0.374447] ACPI: PCI Interrupt Link [AX2B] (IRQs 16) *0, disabled.
[ 0.374975] ACPI: PCI Interrupt Link [AX2C] (IRQs 16) *0, disabled.
[ 0.375503] ACPI: PCI Interrupt Link [AX2D] (IRQs 16) *0, disabled.
[ 0.376066] ACPI: PCI Interrupt Link [AX3A] (IRQs 16) *0
[ 0.376554] ACPI: PCI Interrupt Link [AX3B] (IRQs 16) *0, disabled.
[ 0.377087] ACPI: PCI Interrupt Link [AX3C] (IRQs 16) *0, disabled.
[ 0.377617] ACPI: PCI Interrupt Link [AX3D] (IRQs 16) *0, disabled.
[ 0.378146] ACPI: PCI Interrupt Link [AX4A] (IRQs 16) *0, disabled.
[ 0.378675] ACPI: PCI Interrupt Link [AX4B] (IRQs 16) *0, disabled.
[ 0.379206] ACPI: PCI Interrupt Link [AX4C] (IRQs 16) *0, disabled.
[ 0.379738] ACPI: PCI Interrupt Link [AX4D] (IRQs 16) *0, disabled.
[ 0.380273] ACPI: PCI Interrupt Link [AX5A] (IRQs 16) *0, disabled.
[ 0.380807] ACPI: PCI Interrupt Link [AX5B] (IRQs 16) *0, disabled.
[ 0.381339] ACPI: PCI Interrupt Link [AX5C] (IRQs 16) *0, disabled.
[ 0.381871] ACPI: PCI Interrupt Link [AX5D] (IRQs 16) *0, disabled.
[ 0.382403] ACPI: PCI Interrupt Link [AX6A] (IRQs 16) *0, disabled.
[ 0.382941] ACPI: PCI Interrupt Link [AX6B] (IRQs 16) *0, disabled.
[ 0.383470] ACPI: PCI Interrupt Link [AX6C] (IRQs 16) *0, disabled.
[ 0.384000] ACPI: PCI Interrupt Link [AX6D] (IRQs 16) *0, disabled.
[ 0.384510] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.385133] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[ 0.385755] ACPI: PCI Interrupt Link [AUBB] (IRQs 20 21 22 23) *0
[ 0.386378] ACPI: PCI Interrupt Link [AUBC] (IRQs 20 21 22 23) *0
[ 0.387001] ACPI: PCI Interrupt Link [AUBD] (IRQs 20 21 22 23) *0
[ 0.387623] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.388274] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.388896] ACPI: PCI Interrupt Link [ASMB] (IRQs 16) *0
[ 0.389380] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.390051] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.390723] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.391369] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.391369] vgaarb: loaded
[ 0.391369] vgaarb: bridge control possible 0000:02:00.0
[ 0.391369] PCI: Using ACPI for IRQ routing
[ 0.392872] PCI: pci_cache_line_size set to 64 bytes
[ 0.393099] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.393106] reserve RAM buffer: 0000000037d94000 - 0000000037ffffff
[ 0.393113] reserve RAM buffer: 0000000037e57000 - 0000000037ffffff
[ 0.393120] reserve RAM buffer: 0000000037eed000 - 0000000037ffffff
[ 0.393127] reserve RAM buffer: 0000000037f00000 - 0000000037ffffff
[ 0.393422] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.393497] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.393794] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.396192] Switching to clocksource hpet
[ 0.400127] pnp: PnP ACPI init
[ 0.400232] ACPI: bus type pnp registered
[ 0.401079] pnp 00:00: [bus 00-ff]
[ 0.401088] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.401095] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.401101] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.401108] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.401115] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.401121] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.401128] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.401134] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.401141] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.401147] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.401154] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.401161] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.401167] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.401174] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.401180] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.401187] pnp 00:00: [mem 0x40000000-0xf7ffffff window]
[ 0.401194] pnp 00:00: [mem 0xfa000000-0xfebfffff window]
[ 0.401200] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.401206] pnp 00:00: [mem 0xfff00000-0xffffffff]
[ 0.401426] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.401635] pnp 00:01: [io 0x0010-0x001f]
[ 0.401642] pnp 00:01: [io 0x0022-0x003f]
[ 0.401648] pnp 00:01: [io 0x0044-0x005f]
[ 0.401654] pnp 00:01: [io 0x0065-0x006f]
[ 0.401660] pnp 00:01: [io 0x0072-0x0080]
[ 0.401666] pnp 00:01: [io 0x0090-0x009f]
[ 0.401672] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.401677] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.401683] pnp 00:01: [io 0x0380-0x0387]
[ 0.401689] pnp 00:01: [io 0x1500-0x157f]
[ 0.401695] pnp 00:01: [io 0x1580-0x15ff]
[ 0.401705] pnp 00:01: [io 0x1600-0x167f]
[ 0.401711] pnp 00:01: [io 0x1680-0x16ff]
[ 0.401717] pnp 00:01: [io 0x1400-0x147f]
[ 0.401723] pnp 00:01: [io 0x1480-0x14ff]
[ 0.401728] pnp 00:01: [io 0x0400-0x047f]
[ 0.401734] pnp 00:01: [io 0x0480-0x04ff]
[ 0.401740] pnp 00:01: [io 0x0500-0x057f]
[ 0.401746] pnp 00:01: [io 0x0580-0x05ff]
[ 0.401752] pnp 00:01: [io 0x0800-0x087f]
[ 0.401757] pnp 00:01: [io 0x0880-0x08ff]
[ 0.401764] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.401919] system 00:01: [io 0x0380-0x0387] has been reserved
[ 0.401991] system 00:01: [io 0x1500-0x157f] has been reserved
[ 0.402058] system 00:01: [io 0x1580-0x15ff] has been reserved
[ 0.402125] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.402192] system 00:01: [io 0x1680-0x16ff] has been reserved
[ 0.402259] system 00:01: [io 0x1400-0x147f] has been reserved
[ 0.402327] system 00:01: [io 0x1480-0x14ff] has been reserved
[ 0.402394] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.402461] system 00:01: [io 0x0480-0x04ff] has been reserved
[ 0.402527] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.402594] system 00:01: [io 0x0580-0x05ff] has been reserved
[ 0.402661] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.402728] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.402797] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.403317] pnp 00:02: [irq 0 disabled]
[ 0.403337] pnp 00:02: [irq 8]
[ 0.403344] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.403452] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.403487] pnp 00:03: [io 0x0000-0x000f]
[ 0.403494] pnp 00:03: [io 0x0081-0x008f]
[ 0.403500] pnp 00:03: [io 0x00c0-0x00df]
[ 0.403506] pnp 00:03: [dma 4]
[ 0.403611] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.403640] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.403653] pnp 00:04: [irq 13]
[ 0.403766] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.403864] pnp 00:05: [io 0x0070-0x0071]
[ 0.403973] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.404001] pnp 00:06: [io 0x0061]
[ 0.404145] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.404198] pnp 00:07: [io 0x0060]
[ 0.404205] pnp 00:07: [io 0x0064]
[ 0.404218] pnp 00:07: [irq 1]
[ 0.404325] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.404378] pnp 00:08: [irq 12]
[ 0.404486] pnp 00:08: Plug and Play ACPI device, IDs AUI1101 PNP0f13 (active)
[ 0.404533] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.404540] pnp 00:09: [mem 0x000ec000-0x000fffff]
[ 0.404547] pnp 00:09: [mem 0xf8000000-0xf9ffffff]
[ 0.404553] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.404559] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.404717] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.404790] system 00:09: [mem 0x000ec000-0x000fffff] could not be reserved
[ 0.404859] system 00:09: [mem 0xf8000000-0xf9ffffff] has been reserved
[ 0.404928] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.404995] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.405064] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.409722] pnp: PnP ACPI: found 10 devices
[ 0.409788] ACPI: ACPI bus type pnp unregistered
[ 0.409854] PnPBIOS: Disabled by ACPI PNP
[ 0.451848] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.451934] PCI: max bus depth: 1 pci_try_num: 2
[ 0.452001] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.452098] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.452166] pci 0000:00:10.0: PCI bridge to [bus 02-02]
[ 0.452232] pci 0000:00:10.0: bridge window [io 0x2000-0x2fff]
[ 0.452301] pci 0000:00:10.0: bridge window [mem 0x52000000-0x52ffffff]
[ 0.452367] pci 0000:00:10.0: bridge window [mem 0x40000000-0x51ffffff 64bit pref]
[ 0.452448] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.452521] pci 0000:00:15.0: bridge window [mem 0x53000000-0x530fffff]
[ 0.459755] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[ 0.459858] pci 0000:00:09.0: setting latency timer to 64
[ 0.459870] pci 0000:00:10.0: setting latency timer to 64
[ 0.460242] ACPI: PCI Interrupt Link [AX3A] enabled at IRQ 16
[ 0.460339] pci 0000:00:15.0: setting latency timer to 64
[ 0.460637] ACPI: PCI Interrupt Link [AX4A] enabled at IRQ 16
[ 0.460714] pci 0000:00:16.0: setting latency timer to 64
[ 0.460726] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.460733] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.460740] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.460746] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.460753] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.460760] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.460767] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.460773] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.460780] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.460787] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.460794] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.460801] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.460807] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.460814] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.460821] pci_bus 0000:00: resource 18 [mem 0x40000000-0xf7ffffff]
[ 0.460828] pci_bus 0000:00: resource 19 [mem 0xfa000000-0xfebfffff]
[ 0.460835] pci_bus 0000:00: resource 20 [mem 0xfff00000-0xffffffff]
[ 0.460843] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.460849] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.460856] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.460863] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.460869] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.460876] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.460883] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.460890] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.460897] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.460903] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.460910] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.460917] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.460924] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.460931] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[ 0.460938] pci_bus 0000:01: resource 18 [mem 0x40000000-0xf7ffffff]
[ 0.460945] pci_bus 0000:01: resource 19 [mem 0xfa000000-0xfebfffff]
[ 0.460951] pci_bus 0000:01: resource 20 [mem 0xfff00000-0xffffffff]
[ 0.460958] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.460965] pci_bus 0000:02: resource 1 [mem 0x52000000-0x52ffffff]
[ 0.460972] pci_bus 0000:02: resource 2 [mem 0x40000000-0x51ffffff 64bit pref]
[ 0.460980] pci_bus 0000:03: resource 1 [mem 0x53000000-0x530fffff]
[ 0.461124] NET: Registered protocol family 2
[ 0.461349] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.462066] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.463096] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.463598] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.463666] TCP reno registered
[ 0.463733] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.463812] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.464196] NET: Registered protocol family 1
[ 0.464761] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[ 0.544421] ACPI: PCI Interrupt Link [AUBB] enabled at IRQ 22
[ 0.560449] ACPI: PCI Interrupt Link [AUBC] enabled at IRQ 21
[ 0.636415] ACPI: PCI Interrupt Link [AUBD] enabled at IRQ 20
[ 0.652171] pci 0000:02:00.0: Boot video device
[ 0.652222] PCI: CLS 64 bytes, default 64
[ 0.652359] Unpacking initramfs...
[ 0.785145] Freeing initrd memory: 2728k freed
[ 0.788612] audit: initializing netlink socket (disabled)
[ 0.788711] type=2000 audit(1370914050.784:1): initialized
[ 0.819062] highmem bounce pool size: 64 pages
[ 0.819145] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.819987] VFS: Disk quotas dquot_6.5.2
[ 0.820152] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.820373] msgmni has been set to 1752
[ 0.820807] alg: No test for stdrng (krng)
[ 0.820950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.821029] io scheduler noop registered
[ 0.821089] io scheduler deadline registered
[ 0.821185] io scheduler cfq registered (default)
[ 0.821779] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.821902] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.821969] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.823000] intel_idle: MWAIT substates: 0x20220
[ 0.823017] intel_idle: v0.4 model 0x1C
[ 0.823023] intel_idle: lapic_timer_reliable_states 0x2
[ 0.823028] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.823205] ERST: Table is not found!
[ 0.823268] GHES: HEST is not enabled!
[ 0.823361] isapnp: Scanning for PnP cards...
[ 1.176389] isapnp: No Plug & Play device found
[ 1.176626] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.180980] Linux agpgart interface v0.103
[ 1.181590] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.198272] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.198349] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.198822] mousedev: PS/2 mouse device common for all mice
[ 1.200163] rtc_cmos 00:05: RTC can wake from S4
[ 1.200531] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.200655] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.200854] cpuidle: using governor ladder
[ 1.201060] cpuidle: using governor menu
[ 1.201696] TCP cubic registered
[ 1.201873] NET: Registered protocol family 10
[ 1.203270] Mobile IPv6
[ 1.203334] NET: Registered protocol family 17
[ 1.203404] Registering the dns_resolver key type
[ 1.203511] Using IPI No-Shortcut mode
[ 1.203933] PM: Hibernation image not present or could not be loaded.
[ 1.203964] registered taskstats version 1
[ 1.204984] rtc_cmos 00:05: setting system clock to 2013-06-11 01:27:31 UTC (1370914051)
[ 1.205212] Initializing network drop monitor service
[ 1.205529] Freeing unused kernel memory: 416k freed
[ 1.205989] Write protecting the kernel text: 2848k
[ 1.206132] Write protecting the kernel read-only data: 1092k
[ 1.206214] NX-protecting the kernel data: 3296k
[ 1.213751] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.234933] udevd[49]: starting version 175
[ 1.410765] SCSI subsystem initialized
[ 1.479203] libata version 3.00 loaded.
[ 1.481975] ahci 0000:00:0b.0: version 3.0
[ 1.482606] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 1.482808] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 1.482826] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 1.483189] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
[ 1.483287] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part
[ 1.483366] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.520358] scsi0 : ahci
[ 1.524079] scsi1 : ahci
[ 1.527988] scsi2 : ahci
[ 1.529584] scsi3 : ahci
[ 1.545840] scsi4 : ahci
[ 1.549837] scsi5 : ahci
[ 1.550604] ata1: SATA max UDMA/133 abar m8192< at >0x53104000 port 0x53104100 irq 40
[ 1.550696] ata2: DUMMY
[ 1.550764] ata3: DUMMY
[ 1.550831] ata4: DUMMY
[ 1.550899] ata5: DUMMY
[ 1.550967] ata6: DUMMY
[ 1.868097] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.868411] ata1.00: ATA-8: OCZ-VERTEX, 1.6, max UDMA/133
[ 1.868479] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 1.870358] ata1.00: configured for UDMA/133
[ 1.870726] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX 1.6 PQ: 0 ANSI: 5
[ 1.873156] [Firmware Bug]: Invalid critical threshold (0)
[ 1.875237] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.875318] ACPI: Thermal Zone [TZ0] (57 C)
[ 1.889199] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 1.889629] sd 0:0:0:0: [sda] Write Protect is off
[ 1.889704] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.889817] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.891409] sda: sda1 sda2
[ 1.892594] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.177159] kjournald starting. Commit interval 5 seconds
[ 2.177242] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 2.632100] udevd[384]: starting version 175
[ 2.910954] ACPI: Requesting acpi_cpufreq
[ 2.929427] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 2.929604] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 2.943400] usbcore: registered new interface driver usbfs
[ 2.943557] usbcore: registered new interface driver hub
[ 2.953228] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 2.967889] usbcore: registered new device driver usb
[ 2.968276] ACPI: Lid Switch [LID0]
[ 2.968689] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 2.968784] ACPI: Sleep Button [SLPB]
[ 2.969091] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 2.969186] ACPI: Power Button [PWRB]
[ 2.969608] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.969703] ACPI: Power Button [PWRF]
[ 2.981647] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.981826] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 2.981837] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 2.981985] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 2.982123] ehci_hcd 0000:00:04.1: debug port 1
[ 2.982207] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 2.982264] ehci_hcd 0000:00:04.1: irq 22, io mem 0x53109200
[ 2.992078] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 2.992251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.992330] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.992415] usb usb1: Product: EHCI Host Controller
[ 2.992485] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 2.992560] usb usb1: SerialNumber: 0000:00:04.1
[ 2.998224] hub 1-0:1.0: USB hub found
[ 2.998318] hub 1-0:1.0: 5 ports detected
[ 2.998705] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 2.998717] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 2.998813] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 2.998952] ehci_hcd 0000:00:06.1: debug port 1
[ 2.999032] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
[ 2.999084] ehci_hcd 0000:00:06.1: irq 20, io mem 0x53109100
[ 3.008159] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 3.008500] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.008580] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.008666] usb usb2: Product: EHCI Host Controller
[ 3.008740] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 3.008815] usb usb2: SerialNumber: 0000:00:06.1
[ 3.021824] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.028471] ACPI: Battery Slot [BAT0] (battery present)
[ 3.076242] ACPI: AC Adapter [ACAD] (on-line)
[ 3.079363] hub 2-0:1.0: USB hub found
[ 3.079452] hub 2-0:1.0: 3 ports detected
[ 3.079924] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 3.079934] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 3.080079] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 3.080237] ohci_hcd 0000:00:04.0: irq 23, io mem 0x53108000
[ 3.138136] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.138221] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.138307] usb usb3: Product: OHCI Host Controller
[ 3.138379] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 3.138454] usb usb3: SerialNumber: 0000:00:04.0
[ 3.139044] hub 3-0:1.0: USB hub found
[ 3.139133] hub 3-0:1.0: 5 ports detected
[ 3.139541] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 3.139553] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 3.139666] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 3.139826] ohci_hcd 0000:00:06.0: irq 21, io mem 0x53107000
[ 3.194116] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.194197] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.194280] usb usb4: Product: OHCI Host Controller
[ 3.194348] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 3.194422] usb usb4: SerialNumber: 0000:00:06.0
[ 3.194950] hub 4-0:1.0: USB hub found
[ 3.195034] hub 4-0:1.0: 3 ports detected
[ 3.195505] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 3.196288] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 3.196392] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 3.234282] nvidia: module license 'NVIDIA' taints kernel.
[ 3.234365] Disabling lock debugging due to kernel taint
[ 3.290135] wmi: Mapper loaded
[ 3.308151] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[ 3.450064] acpi device:2e: registered as cooling_device2
[ 3.450612] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input5
[ 3.450710] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 3.500148] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 3.531533] usb 1-3: New USB device found, idVendor=0bda, idProduct=0159
[ 3.531614] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.531688] usb 1-3: Product: USB2.0-CRW
[ 3.531754] usb 1-3: Manufacturer: Generic
[ 3.531819] usb 1-3: SerialNumber: 20071114173400000
[ 3.569773] Compat-drivers backport release: compat-drivers-v3.9-rc4-2-su
[ 3.569851] Backport based on linux-stable.git v3.9-rc4
[ 3.569920] compat.git: linux-stable.git
[ 3.648071] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 3.715869] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 3.722184] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 < at > 1, addr c8:0a:a9:d1:10:3b
[ 3.722277] forcedeth 0000:00:0a.0: highdma csum pwrctl lnktim msi desc-v3
[ 3.732282] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00
[ 3.732420] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 3.732440] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 3.732459] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 3.732478] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 3.783574] usb 2-2: New USB device found, idVendor=090c, idProduct=637b
[ 3.783656] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.783729] usb 2-2: Product: HP Webcam-50
[ 3.783797] usb 2-2: Manufacturer: Image Processor
[ 3.788290] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 3.789110] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.790548] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[ 3.790630] hda_intel: Disabling MSI
[ 3.790767] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[ 3.996825] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 4.194889] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input8
[ 4.199054] Linux media interface: v0.10
[ 4.200074] usb 4-3: new full-speed USB device number 2 using ohci_hcd
[ 4.203494] Initializing USB Mass Storage driver...
[ 4.204489] usbcore: registered new interface driver usb-storage
[ 4.204564] USB Mass Storage support registered.
[ 4.284190] Linux video capture interface: v2.00
[ 4.299884] uvcvideo: Found UVC 1.00 device HP Webcam-50 (090c:637b)
[ 4.971846] sched: RT throttling activated
[ 5.011332] scsi6 : usb-storage 1-3:1.0
[ 5.011734] usbcore: registered new interface driver ums-realtek
[ 5.013808] input: HP Webcam-50 as /devices/pci0000:00/0000:00:06.1/usb2/2-2/2-2:1.0/input/input9
[ 5.015111] usbcore: registered new interface driver uvcvideo
[ 5.015188] USB Video Class driver (1.1.1)
[ 5.114172] usb 4-3: New USB device found, idVendor=03f0, idProduct=2a1d
[ 5.114254] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.114325] usb 4-3: Product: HP Bluetooth Module
[ 5.114393] usb 4-3: Manufacturer: Broadcom Corp
[ 5.114461] usb 4-3: SerialNumber: 78E400FFC3CA
[ 5.233842] Bluetooth: Core ver 2.16
[ 5.233992] NET: Registered protocol family 31
[ 5.234061] Bluetooth: HCI device and connection manager initialized
[ 5.234772] Bluetooth: HCI socket layer initialized
[ 5.234853] Bluetooth: L2CAP socket layer initialized
[ 5.234939] Bluetooth: SCO socket layer initialized
[ 5.249584] usbcore: registered new interface driver btusb
[ 5.672595] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input10
[ 6.011378] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.036403] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input11
[ 6.037054] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input12
[ 6.044816] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.045186] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 6.061815] ACPI: PCI Interrupt Link [APMU] enabled at IRQ 20
[ 6.062006] nvidia 0000:02:00.0: power state changed by ACPI to D0
[ 6.062113] nvidia 0000:02:00.0: power state changed by ACPI to D0
[ 6.063141] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 6.063260] nvidia 0000:02:00.0: setting latency timer to 64
[ 6.063283] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.065837] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.88 Wed Mar 27 14:31:12 PDT 2013
[ 6.826715] sd 6:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
[ 6.829596] sd 6:0:0:0: [sdb] Write Protect is off
[ 6.829682] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 6.831576] sd 6:0:0:0: [sdb] No Caching mode page present
[ 6.831661] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.839566] sd 6:0:0:0: [sdb] No Caching mode page present
[ 6.839657] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.869305] sdb: sdb1
[ 6.876585] sd 6:0:0:0: [sdb] No Caching mode page present
[ 6.876675] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.876760] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 7.886121] Adding 2097140k swap on /dev/sda2. Priority:-1 extents:1 across:2097140k SS
[ 8.038026] EXT3-fs (sda1): using internal journal
[ 8.138248] loop: module loaded
[ 8.291442] cfg80211: Calling CRDA to update world regulatory domain
[ 8.405262] cfg80211: World regulatory domain updated:
[ 8.405339] cfg80211: (start_freq - end_freq < at > bandwidth), (max_antenna_gain, max_eirp)
[ 8.405424] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
[ 8.405507] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi, 2000 mBm)
[ 8.405590] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi, 2000 mBm)
[ 8.405673] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
[ 8.405756] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
[ 8.512313] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 8.556156] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[ 8.580341] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 8.601702] b43 ssb0:0: firmware: agent loaded b43/ucode15.fw into memory
[ 8.620705] scsi7 : vhba
[ 8.623127] b43 ssb0:0: firmware: agent loaded b43/lp0initvals15.fw into memory
[ 8.636728] b43 ssb0:0: firmware: agent loaded b43/lp0bsinitvals15.fw into memory
[ 8.662882] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.665172] Registered led device: b43-phy0::tx
[ 8.665265] Registered led device: b43-phy0::rx
[ 8.665356] Registered led device: b43-phy0::radio
[ 10.670222] RPC: Registered named UNIX socket transport module.
[ 10.670310] RPC: Registered udp transport module.
[ 10.670382] RPC: Registered tcp transport module.
[ 10.670454] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.687127] FS-Cache: Loaded
[ 10.712688] FS-Cache: Netfs 'nfs' registered for caching
[ 10.726534] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw< at >public.gmane.org).
[ 11.316003] fuse init (API version 7.17)
[ 12.717735] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 12.918751] Bluetooth: RFCOMM TTY layer initialized
[ 12.918864] Bluetooth: RFCOMM socket layer initialized
[ 12.918937] Bluetooth: RFCOMM ver 1.11
[ 12.923549] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.923630] Bluetooth: BNEP filters: protocol multicast
[ 12.923721] Bluetooth: BNEP socket layer initialized
[ 12.940945] lp: driver loaded but no devices found
[ 12.967205] ppdev: user-space parallel port driver
[ 15.316158] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 21.065656] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.099222] forcedeth 0000:00:0a.0: eth0: no link during initialization
[ 21.100658] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 116.517125] usb 4-3: USB disconnect, device number 2
[ 120.768174] usb 4-3: new full-speed USB device number 3 using ohci_hcd
[ 120.993139] usb 4-3: New USB device found, idVendor=03f0, idProduct=2a1d
[ 120.993160] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 120.993175] usb 4-3: Product: HP Bluetooth Module
[ 120.993186] usb 4-3: Manufacturer: Broadcom Corp
[ 120.993197] usb 4-3: SerialNumber: 78E400FFC3CA
[ 238.446141] cfg80211: Calling CRDA to update world regulatory domain
[ 238.448481] lib80211: common routines for IEEE802.11 drivers
[ 238.448494] lib80211_crypt: registered algorithm 'NULL'
[ 238.470021] wl: disagrees about version of symbol cfg80211_scan_done
[ 238.470036] wl: Unknown symbol cfg80211_scan_done (err -22)
[ 238.470134] wl: disagrees about version of symbol cfg80211_disconnected
[ 238.470144] wl: Unknown symbol cfg80211_disconnected (err -22)
[ 238.470219] wl: disagrees about version of symbol wiphy_register
[ 238.470229] wl: Unknown symbol wiphy_register (err -22)
[ 238.470247] wl: disagrees about version of symbol wiphy_new
[ 238.470256] wl: Unknown symbol wiphy_new (err -22)
[ 238.470270] wl: disagrees about version of symbol cfg80211_put_bss
[ 238.470278] wl: Unknown symbol cfg80211_put_bss (err -22)
[ 238.470292] wl: disagrees about version of symbol cfg80211_roamed
[ 238.470300] wl: Unknown symbol cfg80211_roamed (err -22)
[ 238.470350] wl: disagrees about version of symbol cfg80211_ibss_joined
[ 238.470360] wl: Unknown symbol cfg80211_ibss_joined (err -22)
[ 238.470394] wl: disagrees about version of symbol cfg80211_michael_mic_failure
[ 238.470404] wl: Unknown symbol cfg80211_michael_mic_failure (err -22)
[ 238.470419] wl: disagrees about version of symbol cfg80211_connect_result
[ 238.470428] wl: Unknown symbol cfg80211_connect_result (err -22)
[ 238.470471] wl: disagrees about version of symbol wiphy_unregister
[ 238.470479] wl: Unknown symbol wiphy_unregister (err -22)
[ 238.470503] wl: disagrees about version of symbol cfg80211_get_bss
[ 238.470512] wl: Unknown symbol cfg80211_get_bss (err -22)
[ 238.470537] wl: disagrees about version of symbol __ieee80211_get_channel
[ 238.470546] wl: Unknown symbol __ieee80211_get_channel (err -22)
[ 238.470598] wl: disagrees about version of symbol ieee80211_channel_to_frequency
[ 238.470608] wl: Unknown symbol ieee80211_channel_to_frequency (err -22)
[ 238.470645] wl: disagrees about version of symbol cfg80211_inform_bss_frame
[ 238.470655] wl: Unknown symbol cfg80211_inform_bss_frame (err -22)
[ 238.470691] wl: disagrees about version of symbol wiphy_free
[ 238.470700] wl: Unknown symbol wiphy_free (err -22)
[ 238.475076] cfg80211: World regulatory domain updated:
[ 238.475086] cfg80211: (start_freq - end_freq < at > bandwidth), (max_antenna_gain, max_eirp)
[ 238.475095] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
[ 238.475102] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi, 2000 mBm)
[ 238.475109] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi, 2000 mBm)
[ 238.475116] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
[ 238.475123] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
[ 259.505813] wl: disagrees about version of symbol cfg80211_scan_done
[ 259.505827] wl: Unknown symbol cfg80211_scan_done (err -22)
[ 259.505901] wl: disagrees about version of symbol cfg80211_disconnected
[ 259.505908] wl: Unknown symbol cfg80211_disconnected (err -22)
[ 259.505964] wl: disagrees about version of symbol wiphy_register
[ 259.505970] wl: Unknown symbol wiphy_register (err -22)
[ 259.505982] wl: disagrees about version of symbol wiphy_new
[ 259.505988] wl: Unknown symbol wiphy_new (err -22)
[ 259.505998] wl: disagrees about version of symbol cfg80211_put_bss
[ 259.506004] wl: Unknown symbol cfg80211_put_bss (err -22)
[ 259.506013] wl: disagrees about version of symbol cfg80211_roamed
[ 259.506019] wl: Unknown symbol cfg80211_roamed (err -22)
[ 259.506058] wl: disagrees about version of symbol cfg80211_ibss_joined
[ 259.506064] wl: Unknown symbol cfg80211_ibss_joined (err -22)
[ 259.506089] wl: disagrees about version of symbol cfg80211_michael_mic_failure
[ 259.506095] wl: Unknown symbol cfg80211_michael_mic_failure (err -22)
[ 259.506105] wl: disagrees about version of symbol cfg80211_connect_result
[ 259.506111] wl: Unknown symbol cfg80211_connect_result (err -22)
[ 259.506140] wl: disagrees about version of symbol wiphy_unregister
[ 259.506146] wl: Unknown symbol wiphy_unregister (err -22)
[ 259.506163] wl: disagrees about version of symbol cfg80211_get_bss
[ 259.506169] wl: Unknown symbol cfg80211_get_bss (err -22)
[ 259.506187] wl: disagrees about version of symbol __ieee80211_get_channel
[ 259.506193] wl: Unknown symbol __ieee80211_get_channel (err -22)
[ 259.506231] wl: disagrees about version of symbol ieee80211_channel_to_frequency
[ 259.506238] wl: Unknown symbol ieee80211_channel_to_frequency (err -22)
[ 259.506264] wl: disagrees about version of symbol cfg80211_inform_bss_frame
[ 259.506270] wl: Unknown symbol cfg80211_inform_bss_frame (err -22)
[ 259.506297] wl: disagrees about version of symbol wiphy_free
[ 259.506303] wl: Unknown symbol wiphy_free (err -22)
[ 285.364445] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 285.384283] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00
[ 285.384325] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 285.384357] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 285.384381] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 285.384404] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 285.440336] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 285.474684] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 285.516143] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[ 285.540591] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 285.556168] b43 ssb0:0: firmware: agent loaded b43/ucode15.fw into memory
[ 285.564582] b43 ssb0:0: firmware: agent loaded b43/lp0initvals15.fw into memory
[ 285.572681] b43 ssb0:0: firmware: agent loaded b43/lp0bsinitvals15.fw into memory
[ 285.573037] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 285.577502] Registered led device: b43-phy0::tx
[ 285.577622] Registered led device: b43-phy0::rx
[ 285.577729] Registered led device: b43-phy0::radio
[ 326.436180] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 331.949752] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 398.716209] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 404.241816] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 404.538822] forcedeth 0000:00:0a.0: eth0: no link during initialization
[ 404.539968] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 405.140193] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 410.665671] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 414.070107] wlan0: authenticate with 2c:44:01:87:db:81
[ 414.092903] wlan0: send auth to 2c:44:01:87:db:81 (try 1/3)
[ 414.094735] wlan0: authenticated
[ 414.094807] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 414.094822] b43 ssb0:0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 414.096176] wlan0: associate with 2c:44:01:87:db:81 (try 1/3)
[ 414.098952] wlan0: RX AssocResp from 2c:44:01:87:db:81 (capab=0x431 status=0 aid=1)
[ 414.101194] wlan0: associated
[ 414.102241] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
03:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:365e]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at 53000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
Linux HPLite2 3.2.0-4-686-pae #1 SMP Debian 3.2.41-2 i686 GNU/Linux
_______________________________________________
b43-dev mailing list
b43-dev-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r< at >public.gmane.org
http://lists.infradead.org/mailman/listinfo/b43-dev
</pre>
Nathan Little
2013-06-11T01:51:07
-
b43 licensing
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13910
<pre>I'm was too annoyed by someone say FUD on b43's legal status.
Can anyone help to inspire pitti?
https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1186779/comments/1
</pre>
Ma Xiaojun
2013-06-10T16:37:46
-
[DEFECT] iw: No output if passive scanning is requested
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13908
<pre>
Using b43 driver with newer kernels (namely, 3.8-1-686-pae from Debian
and 3.10.0-rc4 from git) it isn't possible to perform passive scanning
(in 2.4GHz band) using 'iw' tool. The command 'iw dev wlan0 scan
passive' doesn't print any output. At the same time, a usual scan with
sending probe requests ('iw wlan0 scan' or 'iwlist wlan0 scan') does
work as expected.
The radio module I'm using is
05:00.0 Network controller [0280]: Broadcom Corporation BCM4312
802.11b/g LP-PHY [14e4:4315] (rev 01)
Copy of dmesg, lspci, lsmod, 'iw phy0 info' outputs and kernel config file
is attached.
P.S. I'm not a developer nor programmer, but I'm ready to help to make
linux better :)
--
Ravaillac
</pre>
François Ravaillac
2013-06-10T14:23:17
-
poor signal detection radius
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13900
<pre>I have a Broadcom BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) wifi card which i'm using with the b43 driver (Archlinux).
It has a very limited signal detection radius compared to the broadcom-wl driver (tested on Ubuntu, same machine).
Is there a way to boost the signal detection radius?
Thanks.
</pre>
Arch Zealot
2013-06-06T06:34:17
-
4322 (14e4:432b) success
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13897
<pre>Hi all,
My 4322 (14e4:432b) has worked partially for quite a while, but with
very limited range and throughput. After seeing some work on the list
I decided to try it again on kernel 3.9.3 and I can report that it is
now working extremely well, even at considerable distance. Thanks for
all of your hard work. I think the status on wireless.kernel.org
should be changed from yellow to green. Monitor mode and injection
are also fully functional.
Tom
</pre>
Thomas Zwaagstra
2013-05-27T06:19:29
-
[PATCH] b43: use rx desc underrun interrupt
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13814
<pre>Hi,
long user of b43 driver under openwrt. Not sure if it has been posted
previously but using slow and old hardware (as routers running openwrt
most of the time is), the CPU is sometimes slower than the NIC. So
recently I, and several others, has had problem of wifi going down.
See ticket 7552 at openwrt for more info
(https://dev.openwrt.org/ticket/7552)
I have tracked down the problem to the nic getting into a rx
descriptor underrun. Since the driver don't listen to that (or take
care of it in any other way), the Wifi seemingly just dies. The CPU is
waiting for data from the nic and the nic is waiting for a
confirmation that it can keep sending.
I created a patch for handling of that interrupt. I have tested it by
reducing the number of rx slots to 16 and sending a couple of 100GB of
data. Previously Wifi went down within a minute when maxing out the
uplink (so rx for AP), now it has been working flawless for a 1.5week.
BR,
Thommy Jakobsson
Index: drivers/net/wireless/b43/dma.c
===================================================================
--- compat-wireless-2012-09-07.orig/drivers/net/wireless/b43/dma.c
2013-04-09 17:33:54.325322046 +0200
+++ compat-wireless-2012-09-07/drivers/net/wireless/b43/dma.c
2013-04-09 17:34:43.473565843 +0200
< at >< at > -1688,6 +1688,21 < at >< at >
b43_poison_rx_buffer(ring, skb);
sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize);
}
+void b43_dma_rx_discard(struct b43_dmaring *ring)
+{
+ B43_WARN_ON(ring->tx);
+
+ /* Device has filled all buffers, drop all packets in buffers
+ * and let TCP decrease speed.
+ * Set index to one desc after the last one (which is marked)
+ * so the device will see all slots as free again
+ */
+ /*
+ *TODO: How to increase rx_drop in mac80211
+ */
+ b43_dma_write(ring, B43_DMA32_RXINDEX, ring->nr_slots *
+ sizeof(struct b43_dmadesc32));
+}
void b43_dma_rx(struct b43_dmaring *ring)
{
Index: drivers/net/wireless/b43/dma.h
===================================================================
--- compat-wireless-2012-09-07.orig/drivers/net/wireless/b43/dma.h
2013-04-09 17:34:09.561397686 +0200
+++ compat-wireless-2012-09-07/drivers/net/wireless/b43/dma.h
2013-04-09 17:34:43.461565780 +0200
< at >< at > -10,7 +10,8 < at >< at >
#define B43_DMAIRQ_FATALMASK ((1 << 10) | (1 << 11) | (1 << 12) \
| (1 << 14) | (1 << 15))
#define B43_DMAIRQ_NONFATALMASK (1 << 13)
-#define B43_DMAIRQ_RX_DONE (1 << 16)
+#define B43_DMAIRQ_RX_DONE (1 << 16)
+#define B43_DMAIRQ_RDESC_UFLOW (1 << 13)
/*** 32-bit DMA Engine. ***/
< at >< at > -295,6 +296,8 < at >< at >
void b43_dma_handle_txstatus(struct b43_wldev *dev,
const struct b43_txstatus *status);
+void b43_dma_rx_discard(struct b43_dmaring *ring);
+
void b43_dma_rx(struct b43_dmaring *ring);
void b43_dma_direct_fifo_rx(struct b43_wldev *dev,
Index: drivers/net/wireless/b43/main.c
===================================================================
--- compat-wireless-2012-09-07.orig/drivers/net/wireless/b43/main.c
2013-04-09 17:33:54.325322046 +0200
+++ compat-wireless-2012-09-07/drivers/net/wireless/b43/main.c
2013-04-09 18:08:01.011471215 +0200
< at >< at > -1894,14 +1894,6 < at >< at >
b43_controller_restart(dev, "DMA error");
return;
}
- if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
- b43err(dev->wl, "DMA error: "
- "0x%08X, 0x%08X, 0x%08X, "
- "0x%08X, 0x%08X, 0x%08X\n",
- dma_reason[0], dma_reason[1],
- dma_reason[2], dma_reason[3],
- dma_reason[4], dma_reason[5]);
- }
}
if (unlikely(reason & B43_IRQ_UCODE_DEBUG))
< at >< at > -1920,6 +1912,14 < at >< at >
handle_irq_noise(dev);
/* Check the DMA reason registers for received data. */
+ if (dma_reason[0] & B43_DMAIRQ_RDESC_UFLOW) {
+ //only print 256 time to not flood log
+ if(!(dev->stats.rxdesc_underruns++&0xFF)){
+ b43warn(dev->wl, "Rx descriptor underrun
(high cpu load?), throwing packets\n");
+ }
+ b43_dma_rx_discard(dev->dma.rx_ring);
+
+ }
if (dma_reason[0] & B43_DMAIRQ_RX_DONE) {
if (b43_using_pio_transfers(dev))
b43_pio_rx(dev->pio.rx_queue);
< at >< at > -1977,7 +1977,7 < at >< at >
return IRQ_NONE;
dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
- & 0x0001DC00;
+ & 0x0001FC00;
dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON)
& 0x0000DC00;
dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON)
< at >< at > -3081,7 +3081,7 < at >< at >
b43_write32(dev, 0x018C, 0x02000000);
}
b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000);
- b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
+ b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001FC00);
b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
===================================================================
--- compat-wireless-2012-09-07.orig/drivers/net/wireless/b43/b43.h
2013-04-09 17:04:51.552680190 +0200
+++ compat-wireless-2012-09-07/drivers/net/wireless/b43/b43.h
2013-04-09 17:46:08.472962612 +0200
< at >< at > -671,6 +671,7 < at >< at >
struct b43_stats {
u8 link_noise;
+ u32 rxdesc_underruns;
};
struct b43_key {
</pre>
Thommy Jakobsson
2013-04-15T08:02:05
-
Stone mosaic and Glass mosaic and Metal mosaic Supply与您共享了相册。
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13801
<pre>My dear friend,
How’s your business recently?
We are writing to update you our new designs in 2013, we are special in
manufacturing and designing the mosaic tiles, including the marble stone
mosaic and glass mosaic and metal mosaic, ect.
With more than 10 years production and export experience, we have
successfully developed thousands of mosaic designs to meet the need of
different market! And we can also make it according to your own designs or
requirements!
If you are interested in our mosaics, we would like to send you our
catalogue and pricelist for your reference, we are expecting your kind
prompt reply and feedback! Thanks in advance!
---
Thanks & best regards
Sabrina Law
General manager
Mosaic Factory
Add.: Foshan Guangdong China
https://picasaweb.google.com/lh/sredir?uname=109284505710055987673&target=ALBUM&id=5858968927759139825&authkey=Gv1sRgCMin5pmx3f3FwAE&invite=CNrs3swO&feat=email
_______________________________________________
b43-dev mailing list
b43-dev-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r< at >public.gmane.org
http://lists.infradead.org/mailman/listinfo/b43-dev
</pre>
Stone mosaic and Glass mosaic and Metal mosaic Supply
2013-04-03T10:19:34
-
[PATCH 1/6] b43: use defines for board_type
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13793
<pre>Signed-off-by: Rafał Miłecki <zajec5< at >gmail.com>
---
drivers/net/wireless/b43/phy_lp.c | 4 ++--
drivers/net/wireless/b43/phy_n.c | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 5ed352d..a316579 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
< at >< at > -281,8 +281,8 < at >< at > static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xFFC0, 0x000A);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xC0FF, 0x0B00);
} else if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ ||
- (dev->dev->board_type == 0x048A) || ((dev->phy.rev == 0) &&
- (sprom->boardflags_lo & B43_BFL_FEM))) {
+ dev->dev->board_type == SSB_BOARD_BU4312 ||
+ (dev->phy.rev == 0 && (sprom->boardflags_lo & B43_BFL_FEM))) {
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0001);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0400);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0001);
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 9ec6e0c..efc3f9d 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
< at >< at > -1016,7 +1016,7 < at >< at > static void b43_radio_init2055_post(struct b43_wldev *dev)
if (sprom->revision < 4)
workaround = (dev->dev->board_vendor != PCI_VENDOR_ID_BROADCOM
- && dev->dev->board_type == 0x46D
+ && dev->dev->board_type == SSB_BOARD_CB2_4321
&& dev->dev->board_rev >= 0x41);
else
workaround =
< at >< at > -2616,7 +2616,7 < at >< at > static void b43_nphy_workarounds_rev1_2(struct b43_wldev *dev)
u8 delays2[7] = { 0x8, 0x6, 0x2, 0x4, 0x4, 0x6, 0x1 };
if (sprom->boardflags2_lo & B43_BFL2_SKWRKFEM_BRD ||
- dev->dev->board_type == 0x8B) {
+ dev->dev->board_type == BCMA_BOARD_TYPE_BCM943224M93) {
delays1[0] = 0x1;
delays1[5] = 0x14;
}
< at >< at > -5006,7 +5006,7 < at >< at > int b43_phy_initn(struct b43_wldev *dev)
if (sprom->boardflags2_lo & B43_BFL2_SKWRKFEM_BRD ||
(dev->dev->board_vendor == PCI_VENDOR_ID_APPLE &&
- dev->dev->board_type == 0x8B))
+ dev->dev->board_type == BCMA_BOARD_TYPE_BCM943224M93))
b43_phy_write(dev, B43_NPHY_TXREALFD, 0xA0);
else
b43_phy_write(dev, B43_NPHY_TXREALFD, 0xB8);
</pre>
Rafał Miłecki
2013-03-30T23:46:20
-
Further info on b43 roaming issues
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13772
<pre>wpa_cli readout of event
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 50:a7:33:03:47:78 (SSID='Kardon_Wifi'
freq=2412 MHz)
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 50:a7:33:03:47:78 (SSID='Kardon_Wifi'
freq=2412 MHz)
<3>Trying to associate with 50:a7:33:03:47:78 (SSID='Kardon_Wifi' freq=2412
MHz)
<3>Associated with 50:a7:33:03:47:78
<3>CTRL-EVENT-CONNECTED - Connection to 50:a7:33:03:47:78 completed [id=0
id_str=]
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-DISCONNECTED bssid=50:a7:33:03:47:78 reason=4
locally_generated=1
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 00:22:7f:18:11:d8 (SSID='Kardon_Wifi'
freq=2462 MHz)
<3>Trying to associate with 00:22:7f:18:11:d8 (SSID='Kardon_Wifi' freq=2462
MHz)
<3>Associated with 00:22:7f:18:11:d8
<3>CTRL-EVENT-CONNECTED - Connection to 00:22:7f:18:11:d8 completed [id=0
id_str=]
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 00:22:7f:18:11:98 (SSID='Kardon_Wifi'
freq=2412 MHz)
<3>Trying to associate with 00:22:7f:18:11:98 (SSID='Kardon_Wifi' freq=2412
MHz)
<3>Associated with 00:22:7f:18:11:98
<3>CTRL-EVENT-CONNECTED - Connection to 00:22:7f:18:11:98 completed [id=0
id_str=]
<3>CTRL-EVENT-DISCONNECTED bssid=00:22:7f:18:11:98 reason=3
locally_generated=1
Connection to wpa_supplicant lost - trying to reconnect
Connection to wpa_supplicant re-established
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 00:22:7f:18:11:98 (SSID='Kardon_Wifi'
freq=2412 MHz)
<3>Trying to associate with 00:22:7f:18:11:98 (SSID='Kardon_Wifi' freq=2412
MHz)
<3>Associated with 00:22:7f:18:11:98
<3>CTRL-EVENT-CONNECTED - Connection to 00:22:7f:18:11:98 completed [id=0
id_str=]
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-DISCONNECTED bssid=00:22:7f:18:11:98 reason=4
locally_generated=1
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 50:a7:33:03:47:78 (SSID='Kardon_Wifi'
freq=2412 MHz)
<3>Trying to associate with 50:a7:33:03:47:78 (SSID='Kardon_Wifi' freq=2412
MHz)
<3>Associated with 50:a7:33:03:47:78
<3>CTRL-EVENT-CONNECTED - Connection to 50:a7:33:03:47:78 completed [id=0
id_str=]
<3>CTRL-EVENT-DISCONNECTED bssid=50:a7:33:03:47:78 reason=4
locally_generated=1
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 00:22:7f:18:11:d8 (SSID='Kardon_Wifi'
freq=2462 MHz)
<3>Trying to associate with 00:22:7f:18:11:d8 (SSID='Kardon_Wifi' freq=2462
MHz)
<3>Associated with 00:22:7f:18:11:d8
<3>CTRL-EVENT-CONNECTED - Connection to 00:22:7f:18:11:d8 completed [id=0
id_str=]
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 00:22:7f:11:51:38 (SSID='Kardon_Wifi'
freq=2432 MHz)
<3>Trying to associate with 00:22:7f:11:51:38 (SSID='Kardon_Wifi' freq=2432
MHz)
<3>Associated with 00:22:7f:11:51:38
<3>CTRL-EVENT-CONNECTED - Connection to 00:22:7f:11:51:38 completed [id=0
id_str=]
<3>CTRL-EVENT-DISCONNECTED bssid=00:22:7f:11:51:38 reason=4
locally_generated=1
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 00:22:7f:0f:9c:28 (SSID='Kardon_Wifi'
freq=2432 MHz)
<3>Trying to associate with 00:22:7f:0f:9c:28 (SSID='Kardon_Wifi' freq=2432
MHz)
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 00:22:7f:11:51:38 (SSID='Kardon_Wifi'
freq=2432 MHz)
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-SCAN-RESULTS
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 00:22:7f:18:11:98 (SSID='Kardon_Wifi'
freq=2412 MHz)
<3>Trying to associate with 00:22:7f:18:11:98 (SSID='Kardon_Wifi' freq=2412
MHz)
<3>CTRL-EVENT-DISCONNECTED bssid=00:22:7f:18:11:98 reason=3
locally_generated=1
<4>Failed to initiate AP scan
<4>Failed to initiate AP scan
<3>CTRL-EVENT-SCAN-RESULTS
<3>SME: Trying to authenticate with 00:22:7f:18:11:98 (SSID='Kardon_Wifi'
freq=2412 MHz)
<3>SME: Authentication request to the driver failed
</pre>
Benjamin Daines
2013-03-26T19:18:40
-
b43 - roaming issues with small, weak network
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13769
<pre>I'm using the provided wireless network in my apartment building that consists
of roughly 6-10 access points on different channels. I can't give an exact
amount, because they don't all show up simultaneously in iwlist. If
connection stalls with the connected AP (always does at some point) the driver
will try to roam to another AP. Sometimes it's successful, sometimes it drops
the connection. Syslog indicates authentication time out. No encryption is
used on the network, just MAC filtering. All APs are horribly slow, except
one. I assume this is due to my location. Will provide further details upon
request.
Here is a log from disconnect, connection troubles, me disabling the card,
reenabling card, and successful connection.
Mar 25 21:17:12 ben-linux kernel: [ 6920.189219] ieee80211 phy0: wlan0: No
probe response from AP 00:22:7f:18:11:f8 after 500ms, disconnecting.
Mar 25 21:17:12 ben-linux kernel: [ 6920.189932] cfg80211: Calling CRDA to
update world regulatory domain
Mar 25 21:17:12 ben-linux NetworkManager[1375]: <info> (wlan0): roamed from
BSSID 00:22:7F:18:11:F8 (Kardon_Wifi) to (none) ((none))
Mar 25 21:17:12 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: completed -> disconnected
Mar 25 21:17:12 ben-linux kernel: [ 6920.199224] cfg80211: World regulatory
domain updated:
Mar 25 21:17:12 ben-linux kernel: [ 6920.199235] cfg80211: (start_freq -
end_freq < at > bandwidth), (max_antenna_gain, max_eirp)
Mar 25 21:17:12 ben-linux kernel: [ 6920.199244] cfg80211: (2402000 KHz -
2472000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
Mar 25 21:17:12 ben-linux kernel: [ 6920.199251] cfg80211: (2457000 KHz -
2482000 KHz < at > 20000 KHz), (300 mBi, 2000 mBm)
Mar 25 21:17:12 ben-linux kernel: [ 6920.199258] cfg80211: (2474000 KHz -
2494000 KHz < at > 20000 KHz), (300 mBi, 2000 mBm)
Mar 25 21:17:12 ben-linux kernel: [ 6920.199265] cfg80211: (5170000 KHz -
5250000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
Mar 25 21:17:12 ben-linux kernel: [ 6920.199271] cfg80211: (5735000 KHz -
5835000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
Mar 25 21:17:13 ben-linux wpa_supplicant[1549]: wlan0: Failed to initiate AP
scan
Mar 25 21:17:14 ben-linux wpa_supplicant[1549]: wlan0: Failed to initiate AP
scan
Mar 25 21:17:14 ben-linux wpa_supplicant[1549]: wlan0: SME: Trying to
authenticate with 00:22:7f:18:11:98 (SSID='Kardon_Wifi' freq=2412 MHz)
Mar 25 21:17:14 ben-linux kernel: [ 6921.417127] wlan0: authenticate with
00:22:7f:18:11:98
Mar 25 21:17:14 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: disconnected -> authenticating
Mar 25 21:17:14 ben-linux kernel: [ 6921.440401] wlan0: send auth to
00:22:7f:18:11:98 (try 1/3)
Mar 25 21:17:14 ben-linux kernel: [ 6921.643777] wlan0: send auth to
00:22:7f:18:11:98 (try 2/3)
Mar 25 21:17:14 ben-linux kernel: [ 6921.847525] wlan0: send auth to
00:22:7f:18:11:98 (try 3/3)
Mar 25 21:17:14 ben-linux kernel: [ 6922.051411] wlan0: authentication with
00:22:7f:18:11:98 timed out
Mar 25 21:17:14 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: authenticating -> disconnected
Mar 25 21:17:14 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: disconnected -> scanning
Mar 25 21:17:15 ben-linux wpa_supplicant[1549]: wlan0: SME: Trying to
authenticate with 00:22:7f:18:11:d8 (SSID='Kardon_Wifi' freq=2462 MHz)
Mar 25 21:17:16 ben-linux kernel: [ 6923.259541] wlan0: authenticate with
00:22:7f:18:11:d8
Mar 25 21:17:16 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: scanning -> authenticating
Mar 25 21:17:16 ben-linux kernel: [ 6923.282542] wlan0: send auth to
00:22:7f:18:11:d8 (try 1/3)
Mar 25 21:17:16 ben-linux kernel: [ 6923.485993] wlan0: send auth to
00:22:7f:18:11:d8 (try 2/3)
Mar 25 21:17:16 ben-linux kernel: [ 6923.689798] wlan0: send auth to
00:22:7f:18:11:d8 (try 3/3)
Mar 25 21:17:16 ben-linux kernel: [ 6923.893592] wlan0: authentication with
00:22:7f:18:11:d8 timed out
Mar 25 21:17:16 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: authenticating -> disconnected
Mar 25 21:17:16 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: disconnected -> scanning
Mar 25 21:17:17 ben-linux wpa_supplicant[1549]: wlan0: SME: Trying to
authenticate with 00:22:7f:18:11:f8 (SSID='Kardon_Wifi' freq=2442 MHz)
Mar 25 21:17:17 ben-linux kernel: [ 6925.113479] wlan0: authenticate with
00:22:7f:18:11:f8
Mar 25 21:17:17 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: scanning -> authenticating
Mar 25 21:17:17 ben-linux kernel: [ 6925.136819] wlan0: send auth to
00:22:7f:18:11:f8 (try 1/3)
Mar 25 21:17:18 ben-linux kernel: [ 6925.340209] wlan0: send auth to
00:22:7f:18:11:f8 (try 2/3)
Mar 25 21:17:18 ben-linux kernel: [ 6925.544000] wlan0: send auth to
00:22:7f:18:11:f8 (try 3/3)
Mar 25 21:17:18 ben-linux kernel: [ 6925.747792] wlan0: authentication with
00:22:7f:18:11:f8 timed out
Mar 25 21:17:18 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: authenticating -> disconnected
Mar 25 21:17:19 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: disconnected -> scanning
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <warn> (wlan0): link timed
out.
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> (wlan0): device state
change: activated -> failed (reason 'SSID not found') [100 120 53]
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <warn> Activation (wlan0)
failed for connection 'Kardon_Wifi'
Mar 25 21:17:28 ben-linux dbus[955]: [system] Activating service
name='org.freedesktop.nm_dispatcher' (using servicehelper)
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> (wlan0): device state
change: failed -> disconnected (reason 'none') [120 30 0]
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> (wlan0): deactivating
device (reason 'none') [0]
Mar 25 21:17:28 ben-linux dbus[955]: [system] Successfully activated service
'org.freedesktop.nm_dispatcher'
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> (wlan0): canceled DHCP
transaction, DHCP client pid 7014
Mar 25 21:17:28 ben-linux avahi-daemon[1204]: Withdrawing address record for
174.141.133.162 on wlan0.
Mar 25 21:17:28 ben-linux avahi-daemon[1204]: Leaving mDNS multicast group on
interface wlan0.IPv4 with address 174.141.133.162.
Mar 25 21:17:28 ben-linux avahi-daemon[1204]: Interface wlan0.IPv4 no longer
relevant for mDNS.
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <warn> DNS: plugin dnsmasq
update failed
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Removing DNS
information from /sbin/resolvconf
Mar 25 21:17:28 ben-linux dnsmasq[2214]: setting upstream servers from DBus
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <warn> Couldn't disconnect
supplicant interface: This interface is not connected.
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Auto-activating
connection 'Kardon_Wifi'.
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
starting connection 'Kardon_Wifi'
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> (wlan0): device state
change: disconnected -> prepare (reason 'none') [30 40 0]
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> (wlan0): device state
change: prepare -> config (reason 'none') [40 50 0]
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Activation
(wlan0/wireless): connection 'Kardon_Wifi' requires no security. No secrets
needed.
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Config: added 'ssid'
value 'Kardon_Wifi'
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Config: added
'scan_ssid' value '1'
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Config: added 'key_mgmt'
value 'NONE'
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <warn> Couldn't disconnect
supplicant interface: This interface is not connected.
Mar 25 21:17:28 ben-linux NetworkManager[1375]: <info> Config: set interface
ap_scan to 1
Mar 25 21:17:31 ben-linux nm-dispatcher.action: Script
'/etc/NetworkManager/dispatcher.d/01ifupdown' took too long; killing it.
Mar 25 21:17:31 ben-linux NetworkManager[1375]: <warn> Dispatcher script timed
out: Script '/etc/NetworkManager/dispatcher.d/01ifupdown' timed out.
Mar 25 21:17:37 ben-linux wpa_supplicant[1549]: wlan0: SME: Trying to
authenticate with 00:22:7f:18:11:a8 (SSID='Kardon_Wifi' freq=2427 MHz)
Mar 25 21:17:37 ben-linux kernel: [ 6945.090177] wlan0: authenticate with
00:22:7f:18:11:a8
Mar 25 21:17:37 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: scanning -> authenticating
Mar 25 21:17:37 ben-linux kernel: [ 6945.114148] wlan0: send auth to
00:22:7f:18:11:a8 (try 1/3)
Mar 25 21:17:38 ben-linux kernel: [ 6945.316798] wlan0: send auth to
00:22:7f:18:11:a8 (try 2/3)
Mar 25 21:17:38 ben-linux kernel: [ 6945.520605] wlan0: send auth to
00:22:7f:18:11:a8 (try 3/3)
Mar 25 21:17:38 ben-linux wpa_supplicant[1549]: wlan0: Trying to associate
with 00:22:7f:18:11:a8 (SSID='Kardon_Wifi' freq=2427 MHz)
Mar 25 21:17:38 ben-linux kernel: [ 6945.534689] wlan0: authenticated
Mar 25 21:17:38 ben-linux kernel: [ 6945.536540] wlan0: associate with
00:22:7f:18:11:a8 (try 1/3)
Mar 25 21:17:38 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: authenticating -> associating
Mar 25 21:17:38 ben-linux NetworkManager[1375]: <info> (wlan0): device state
change: config -> unavailable (reason 'none') [50 20 0]
Mar 25 21:17:38 ben-linux NetworkManager[1375]: <info> (wlan0): deactivating
device (reason 'none') [0]
Mar 25 21:17:38 ben-linux wpa_supplicant[1549]: wlan0: CTRL-EVENT-DISCONNECTED
bssid=00:22:7f:18:11:a8 reason=3 locally_generated=1
Mar 25 21:17:38 ben-linux kernel: [ 6945.686553] wlan0: deauthenticating from
00:22:7f:18:11:a8 by local choice (reason=3)
Mar 25 21:17:38 ben-linux NetworkManager[1375]: <info> (wlan0): taking down
device.
Mar 25 21:17:38 ben-linux avahi-daemon[1204]: Interface wlan0.IPv6 no longer
relevant for mDNS.
Mar 25 21:17:38 ben-linux avahi-daemon[1204]: Leaving mDNS multicast group on
interface wlan0.IPv6 with address fe80::e6ce:8fff:fe3e:15a.
Mar 25 21:17:38 ben-linux avahi-daemon[1204]: Withdrawing address record for
fe80::e6ce:8fff:fe3e:15a on wlan0.
Mar 25 21:17:38 ben-linux NetworkManager[1375]: <info> WiFi hardware radio set
disabled
Mar 25 21:17:38 ben-linux NetworkManager[1375]: <info> WiFi now disabled by
radio killswitch
Mar 25 21:17:42 ben-linux NetworkManager[1375]: <info> (wlan0): bringing up
device.
Mar 25 21:17:42 ben-linux NetworkManager[1375]: <info> WiFi hardware radio set
enabled
Mar 25 21:17:42 ben-linux NetworkManager[1375]: <info> WiFi now enabled by
radio killswitch
Mar 25 21:17:42 ben-linux NetworkManager[1375]: <info> (wlan0): bringing up
device.
Mar 25 21:17:42 ben-linux kernel: [ 6949.672681] b43-phy0: Loading firmware
version 666.2 (2011-02-23 01:15:07)
Mar 25 21:17:42 ben-linux kernel: [ 6949.733109] IPv6: ADDRCONF(NETDEV_UP):
wlan0: link is not ready
Mar 25 21:17:42 ben-linux NetworkManager[1375]: <info> (wlan0) supports 4 scan
SSIDs
Mar 25 21:17:42 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: starting -> ready
Mar 25 21:17:42 ben-linux NetworkManager[1375]: <info> (wlan0): device state
change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Mar 25 21:17:42 ben-linux NetworkManager[1375]: <warn> Trying to remove a non-
existant call id.
Mar 25 21:17:42 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: ready -> disconnected
Mar 25 21:17:42 ben-linux NetworkManager[1375]: <info> (wlan0) supports 4 scan
SSIDs
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: disconnected -> inactive
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Auto-activating
connection 'Kardon_Wifi'.
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
starting connection 'Kardon_Wifi'
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> (wlan0): device state
change: disconnected -> prepare (reason 'none') [30 40 0]
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> (wlan0): device state
change: prepare -> config (reason 'none') [40 50 0]
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Activation
(wlan0/wireless): connection 'Kardon_Wifi' requires no security. No secrets
needed.
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Config: added 'ssid'
value 'Kardon_Wifi'
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Config: added
'scan_ssid' value '1'
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Config: added 'key_mgmt'
value 'NONE'
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> Config: set interface
ap_scan to 1
Mar 25 21:17:43 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: inactive -> scanning
Mar 25 21:17:44 ben-linux wpa_supplicant[1549]: wlan0: SME: Trying to
authenticate with 00:22:7f:18:11:d8 (SSID='Kardon_Wifi' freq=2462 MHz)
Mar 25 21:17:44 ben-linux kernel: [ 6951.979532] wlan0: authenticate with
00:22:7f:18:11:d8
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: scanning -> authenticating
Mar 25 21:17:44 ben-linux wpa_supplicant[1549]: wlan0: Trying to associate
with 00:22:7f:18:11:d8 (SSID='Kardon_Wifi' freq=2462 MHz)
Mar 25 21:17:44 ben-linux kernel: [ 6952.002564] wlan0: send auth to
00:22:7f:18:11:d8 (try 1/3)
Mar 25 21:17:44 ben-linux kernel: [ 6952.003676] wlan0: authenticated
Mar 25 21:17:44 ben-linux kernel: [ 6952.006309] wlan0: associate with
00:22:7f:18:11:d8 (try 1/3)
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: authenticating -> associating
Mar 25 21:17:44 ben-linux wpa_supplicant[1549]: wlan0: Associated with
00:22:7f:18:11:d8
Mar 25 21:17:44 ben-linux wpa_supplicant[1549]: wlan0: CTRL-EVENT-CONNECTED -
Connection to 00:22:7f:18:11:d8 completed [id=0 id_str=]
Mar 25 21:17:44 ben-linux kernel: [ 6952.008989] wlan0: RX AssocResp from
00:22:7f:18:11:d8 (capab=0x421 status=0 aid=1)
Mar 25 21:17:44 ben-linux kernel: [ 6952.009345] wlan0: associated
Mar 25 21:17:44 ben-linux kernel: [ 6952.009399] IPv6:
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mar 25 21:17:44 ben-linux kernel: [ 6952.009593] cfg80211: Calling CRDA for
country: US
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> (wlan0): supplicant
interface state: associating -> completed
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> Activation
(wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to
wireless network 'Kardon_Wifi'.
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 3 of 5 (IP Configure Start) scheduled.
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 3 of 5 (IP Configure Start) started...
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> (wlan0): device state
change: config -> ip-config (reason 'none') [50 70 0]
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Beginning DHCPv4 transaction (timeout in 45 seconds)
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> dhclient started with
pid 7276
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Beginning IP6 addrconf.
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 3 of 5 (IP Configure Start) complete.
Mar 25 21:17:44 ben-linux kernel: [ 6952.015312] cfg80211: Regulatory domain
changed to country: US
Mar 25 21:17:44 ben-linux kernel: [ 6952.015315] cfg80211: (start_freq -
end_freq < at > bandwidth), (max_antenna_gain, max_eirp)
Mar 25 21:17:44 ben-linux kernel: [ 6952.015317] cfg80211: (2402000 KHz -
2472000 KHz < at > 40000 KHz), (300 mBi, 2700 mBm)
Mar 25 21:17:44 ben-linux kernel: [ 6952.015319] cfg80211: (5170000 KHz -
5250000 KHz < at > 40000 KHz), (300 mBi, 1700 mBm)
Mar 25 21:17:44 ben-linux kernel: [ 6952.015320] cfg80211: (5250000 KHz -
5330000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
Mar 25 21:17:44 ben-linux kernel: [ 6952.015322] cfg80211: (5490000 KHz -
5600000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
Mar 25 21:17:44 ben-linux kernel: [ 6952.015323] cfg80211: (5650000 KHz -
5710000 KHz < at > 40000 KHz), (300 mBi, 2000 mBm)
Mar 25 21:17:44 ben-linux kernel: [ 6952.015325] cfg80211: (5735000 KHz -
5835000 KHz < at > 40000 KHz), (300 mBi, 3000 mBm)
Mar 25 21:17:44 ben-linux dhclient: Internet Systems Consortium DHCP Client
4.2.4
Mar 25 21:17:44 ben-linux dhclient: Copyright 2004-2012 Internet Systems
Consortium.
Mar 25 21:17:44 ben-linux dhclient: All rights reserved.
Mar 25 21:17:44 ben-linux dhclient: For info, please visit
https://www.isc.org/software/dhcp/
Mar 25 21:17:44 ben-linux dhclient:
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> (wlan0): DHCPv4 state
changed nbi -> preinit
Mar 25 21:17:44 ben-linux dhclient: Listening on LPF/wlan0/e4:ce:8f:3e:01:5a
Mar 25 21:17:44 ben-linux dhclient: Sending on LPF/wlan0/e4:ce:8f:3e:01:5a
Mar 25 21:17:44 ben-linux dhclient: Sending on Socket/fallback
Mar 25 21:17:44 ben-linux dhclient: DHCPREQUEST of 174.141.133.162 on wlan0 to
255.255.255.255 port 67 (xid=0xd47f0d0)
Mar 25 21:17:44 ben-linux dhclient: DHCPACK of 174.141.133.162 from
174.141.132.1
Mar 25 21:17:44 ben-linux dhclient: bound to 174.141.133.162 -- renewal in
17139 seconds.
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> (wlan0): DHCPv4 state
changed preinit -> reboot
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> address
174.141.133.162
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> prefix 22
(255.255.252.0)
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> gateway 174.141.132.1
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> nameserver
'24.238.1.61'
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> nameserver
'24.238.1.62'
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> nameserver '8.8.8.8'
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Mar 25 21:17:44 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 5 of 5 (IPv4 Commit) started...
Mar 25 21:17:44 ben-linux avahi-daemon[1204]: Joining mDNS multicast group on
interface wlan0.IPv4 with address 174.141.133.162.
Mar 25 21:17:44 ben-linux avahi-daemon[1204]: New relevant interface
wlan0.IPv4 for mDNS.
Mar 25 21:17:44 ben-linux avahi-daemon[1204]: Registering new address record
for 174.141.133.162 on wlan0.IPv4.
Mar 25 21:17:45 ben-linux NetworkManager[1375]: <info> (wlan0): device state
change: ip-config -> secondaries (reason 'none') [70 90 0]
Mar 25 21:17:45 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
Stage 5 of 5 (IPv4 Commit) complete.
Mar 25 21:17:45 ben-linux NetworkManager[1375]: <info> (wlan0): device state
change: secondaries -> activated (reason 'none') [90 100 0]
Mar 25 21:17:45 ben-linux NetworkManager[1375]: <info> Policy set 'Kardon_Wifi'
(wlan0) as default for IPv4 routing and DNS.
Mar 25 21:17:45 ben-linux NetworkManager[1375]: <info> Writing DNS information
to /sbin/resolvconf
Mar 25 21:17:45 ben-linux dnsmasq[2214]: setting upstream servers from DBus
Mar 25 21:17:45 ben-linux dnsmasq[2214]: using nameserver 8.8.8.8#53
Mar 25 21:17:45 ben-linux dnsmasq[2214]: using nameserver 24.238.1.62#53
Mar 25 21:17:45 ben-linux dnsmasq[2214]: using nameserver 24.238.1.61#53
Mar 25 21:17:45 ben-linux NetworkManager[1375]: <info> Activation (wlan0)
successful, device activated.
Mar 25 21:17:45 ben-linux dbus[955]: [system] Activating service
name='org.freedesktop.nm_dispatcher' (using servicehelper)
Mar 25 21:17:45 ben-linux dbus[955]: [system] Successfully activated service
'org.freedesktop.nm_dispatcher'
uname -a
Linux ben-linux 3.7.0-7-generic #15-Ubuntu SMP Sat Dec 15 16:34:25 UTC 2012
x86_64 x86_64 x86_64 GNU/Linux
Running with 3.9rc2 compat drivers
03:00.0 0280: 14e4:4331 (rev 02)
Subsystem: 106b:00d6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at b0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
dmesg output:
[ 52.270398] wlan0: authenticate with 00:22:7f:11:51:38
[ 52.294406] wlan0: send auth to 00:22:7f:11:51:38 (try 1/3)
[ 52.295876] wlan0: authenticated
[ 52.297900] wlan0: associate with 00:22:7f:11:51:38 (try 1/3)
[ 52.302147] wlan0: RX AssocResp from 00:22:7f:11:51:38 (capab=0x421
status=0 aid=1)
[ 52.302507] wlan0: associated
[ 52.302514] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 52.302568] cfg80211: Calling CRDA for country: US
[ 52.304933] cfg80211: Regulatory domain changed to country: US
[ 52.304936] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 52.304937] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 52.304939] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 52.304940] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 52.304941] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 52.304942] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 52.304943] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 88.260445] wlan0: deauthenticating from 00:22:7f:11:51:38 by local choice
(reason=3)
[ 88.261449] cfg80211: Calling CRDA to update world regulatory domain
[ 88.263875] cfg80211: World regulatory domain updated:
[ 88.263877] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 88.263878] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 88.263879] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 88.263881] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 88.263882] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 88.263883] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 95.778327] wlan0: authenticate with 00:22:7f:18:11:98
[ 95.802325] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 95.804503] wlan0: authenticated
[ 95.806037] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 96.009641] wlan0: associate with 00:22:7f:18:11:98 (try 2/3)
[ 96.012933] wlan0: RX AssocResp from 00:22:7f:18:11:98 (capab=0x421
status=0 aid=1)
[ 96.013304] wlan0: associated
[ 96.013351] cfg80211: Calling CRDA for country: US
[ 96.018944] cfg80211: Regulatory domain changed to country: US
[ 96.018952] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 96.018958] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 96.018962] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 96.018966] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 96.018970] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 96.018974] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 96.018978] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 104.350890] wlan0: deauthenticating from 00:22:7f:18:11:98 by local choice
(reason=3)
[ 104.358021] cfg80211: Calling CRDA to update world regulatory domain
[ 104.363128] cfg80211: World regulatory domain updated:
[ 104.363135] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 104.363141] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 104.363146] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 104.363150] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 104.363154] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 104.363158] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 105.679906] wlan0: authenticate with 00:22:7f:18:11:d8
[ 105.703803] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 105.705540] wlan0: authenticated
[ 105.707484] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 105.711191] wlan0: RX AssocResp from 00:22:7f:18:11:d8 (capab=0x421
status=0 aid=2)
[ 105.712025] wlan0: associated
[ 105.712162] cfg80211: Calling CRDA for country: US
[ 105.717920] cfg80211: Regulatory domain changed to country: US
[ 105.717923] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 105.717925] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 105.717926] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 105.717928] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 105.717929] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 105.717930] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 105.717932] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 219.859781] CPU1: Core temperature above threshold, cpu clock throttled
(total events = 1)
[ 219.859783] CPU2: Package temperature above threshold, cpu clock throttled
(total events = 1)
[ 219.859785] CPU7: Package temperature above threshold, cpu clock throttled
(total events = 1)
[ 219.859786] CPU3: Package temperature above threshold, cpu clock throttled
(total events = 1)
[ 219.859787] CPU5: Core temperature above threshold, cpu clock throttled
(total events = 1)
[ 219.859789] CPU6: Package temperature above threshold, cpu clock throttled
(total events = 1)
[ 219.859790] CPU5: Package temperature above threshold, cpu clock throttled
(total events = 1)
[ 219.859796] CPU1: Package temperature above threshold, cpu clock throttled
(total events = 1)
[ 219.859809] CPU4: Package temperature above threshold, cpu clock throttled
(total events = 1)
[ 219.859811] CPU0: Package temperature above threshold, cpu clock throttled
(total events = 1)
[ 219.861765] CPU1: Core temperature/speed normal
[ 219.861766] CPU7: Package temperature/speed normal
[ 219.861767] CPU2: Package temperature/speed normal
[ 219.861769] CPU0: Package temperature/speed normal
[ 219.861770] CPU5: Core temperature/speed normal
[ 219.861771] CPU4: Package temperature/speed normal
[ 219.861772] CPU6: Package temperature/speed normal
[ 219.861773] CPU3: Package temperature/speed normal
[ 219.861774] CPU5: Package temperature/speed normal
[ 219.861779] CPU1: Package temperature/speed normal
[ 299.518236] mce: [Hardware Error]: Machine check events logged
[ 763.049327] wlan0: authenticate with 00:22:7f:18:11:a8
[ 763.061354] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 763.063529] wlan0: authenticated
[ 763.064975] wlan0: associate with 00:22:7f:18:11:a8 (try 1/3)
[ 763.071123] wlan0: RX AssocResp from 00:22:7f:18:11:a8 (capab=0x421
status=0 aid=7)
[ 763.077185] wlan0: associated
[ 1375.874823] tg3 0000:02:00.0: wake-up capability enabled by ACPI
[ 1376.092096] wlan0: deauthenticating from 00:22:7f:18:11:a8 by local choice
(reason=3)
[ 1376.100459] cfg80211: Calling CRDA to update world regulatory domain
[ 1376.111005] cfg80211: World regulatory domain updated:
[ 1376.111015] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 1376.111023] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1376.111030] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 1376.111037] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 1376.111043] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1376.111050] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1387.624490] PM: Syncing filesystems ... done.
[ 1387.627583] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1387.642801] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[ 1387.658898] Suspending console(s) (use no_console_suspend to debug)
[ 1387.659219] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1387.659228] apple-gmux 00:08: wake-up capability disabled by ACPI
[ 1387.675062] <6>[fglrx] IRQ 54 Disabled
[ 1387.675201] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 1387.720024] sd 0:0:0:0: [sda] Stopping disk
[ 1388.168708] <6>[fglrx] Suspending fglrx in kernel completed.
[ 1388.168709] <6>[fglrx] Power down the ASIC .
[ 1388.298201] PM: suspend of devices complete after 639.826 msecs
[ 1388.298322] PM: late suspend of devices complete after 0.119 msecs
[ 1388.314181] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[ 1388.330088] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[ 1388.362048] PM: noirq suspend of devices complete after 63.784 msecs
[ 1388.362260] ACPI: Preparing to enter system sleep state S3
[ 1388.402023] PM: Saving platform NVS memory
[ 1388.402275] Disabling non-boot CPUs ...
[ 1388.403525] smpboot: CPU 1 is now offline
[ 1388.505807] smpboot: CPU 2 is now offline
[ 1388.609705] smpboot: CPU 3 is now offline
[ 1388.713604] smpboot: CPU 4 is now offline
[ 1388.714026] Broke affinity for irq 19
[ 1388.817502] smpboot: CPU 5 is now offline
[ 1388.817881] NOHZ: local_softirq_pending 02
[ 1388.817892] NOHZ: local_softirq_pending 02
[ 1388.817893] NOHZ: local_softirq_pending 202
[ 1388.817895] NOHZ: local_softirq_pending 202
[ 1388.817896] NOHZ: local_softirq_pending 202
[ 1388.817897] NOHZ: local_softirq_pending 202
[ 1388.817899] NOHZ: local_softirq_pending 202
[ 1388.921403] smpboot: CPU 6 is now offline
[ 1388.921799] NOHZ: local_softirq_pending 02
[ 1388.921851] Broke affinity for irq 22
[ 1388.921859] Broke affinity for irq 23
[ 1388.922866] smpboot: CPU 7 is now offline
[ 1388.923123] Extended CMOS year: 2000
[ 1388.924294] ACPI: Low-level resume complete
[ 1388.924333] PM: Restoring platform NVS memory
[ 1388.924627] Extended CMOS year: 2000
[ 1388.924682] Enabling non-boot CPUs ...
[ 1388.924743] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1388.938760] CPU1 is up
[ 1388.938805] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 1388.952872] CPU2 is up
[ 1388.953385] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 1388.967487] CPU3 is up
[ 1388.968200] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 1388.981666] CPU4 is up
[ 1388.982403] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 1388.996670] CPU5 is up
[ 1388.997477] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 1389.011770] CPU6 is up
[ 1389.012739] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 1389.027204] CPU7 is up
[ 1389.035130] ACPI: Waking up from system sleep state S3
[ 1390.033922] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[ 1390.049969] pcieport 0000:00:1c.1: power state changed by ACPI to D0
[ 1390.065876] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 1390.161849] PM: noirq resume of devices complete after 160.091 msecs
[ 1390.161907] PM: early resume of devices complete after 0.037 msecs
[ 1390.161954] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1390.161956] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1390.161995] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1390.162005] usb usb3: root hub lost power or was reset
[ 1390.162007] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1390.162012] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1390.162134] usb usb4: root hub lost power or was reset
[ 1390.162218] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[ 1390.162289] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 1390.162372] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[ 1390.162846] mei 0000:00:16.0: wd: failed to find the client
[ 1390.164182] tg3 0000:02:00.0: wake-up capability disabled by ACPI
[ 1390.168155] <6>[fglrx] Power up the ASIC
[ 1390.168355] <6>[fglrx] Preparing resume fglrx in kernel.
[ 1390.191674] <6>[fglrx] Resuming fglrx in kernel completed.
[ 1390.191752] <6>[fglrx] IRQ 54 Enabled
[ 1390.217869] firewire_ohci 0000:04:00.0: irq 48 for MSI/MSI-X
[ 1390.717295] firewire_core 0000:04:00.0: rediscovered device fw0
[ 1391.508515] ata1.01: failed to resume link (SControl 0)
[ 1391.508589] ata2.01: failed to resume link (SControl 0)
[ 1391.664440] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1391.664454] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 1391.664465] ata2.01: link offline, clearing class 3 to NONE
[ 1391.672608] ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered
out
[ 1391.688588] ata2.00: configured for UDMA/100
[ 1391.944127] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1391.944138] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 1392.216087] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered
out
[ 1392.244419] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1392.252655] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1392.252664] ata1.00: configured for UDMA/133
[ 1392.253051] sd 0:0:0:0: [sda] Starting disk
[ 1392.265666] PM: resume of devices complete after 2105.799 msecs
[ 1392.265820] Restarting tasks ... done.
[ 1392.552505] tg3 0000:02:00.0: irq 49 for MSI/MSI-X
[ 1392.552510] tg3 0000:02:00.0: irq 50 for MSI/MSI-X
[ 1392.552514] tg3 0000:02:00.0: irq 51 for MSI/MSI-X
[ 1392.552517] tg3 0000:02:00.0: irq 52 for MSI/MSI-X
[ 1392.552520] tg3 0000:02:00.0: irq 53 for MSI/MSI-X
[ 1393.582212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1393.738269] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 1393.798748] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1394.453696] usb 2-1.2: new low-speed USB device number 4 using ehci_hcd
[ 1394.549013] usb 2-1.2: New USB device found, idVendor=093a, idProduct=2521
[ 1394.549024] usb 2-1.2: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[ 1394.549030] usb 2-1.2: Product: USB OPTICAL MOUSE
[ 1394.552694] input: USB OPTICAL MOUSE as
/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.0/input/input15
[ 1394.552856] hid-generic 0003:093A:2521.0006: input,hidraw3: USB HID v1.11
Mouse [USB OPTICAL MOUSE] on usb-0000:00:1d.7-1.2/input0
[ 1419.786023] wlan0: authenticate with 00:22:7f:18:11:98
[ 1419.809484] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 1419.811923] wlan0: authenticated
[ 1419.812995] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 1419.815737] wlan0: RX AssocResp from 00:22:7f:18:11:98 (capab=0x421
status=0 aid=2)
[ 1419.816412] wlan0: associated
[ 1419.816469] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1419.816664] cfg80211: Calling CRDA for country: US
[ 1419.827442] cfg80211: Regulatory domain changed to country: US
[ 1419.827452] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 1419.827460] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 1419.827467] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 1419.827474] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1419.827480] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1419.827487] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1419.827494] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 1514.682526] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:98 after 500ms, disconnecting.
[ 1514.683292] cfg80211: Calling CRDA to update world regulatory domain
[ 1514.691878] cfg80211: World regulatory domain updated:
[ 1514.691885] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 1514.691890] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1514.691895] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 1514.691899] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 1514.691903] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1514.691907] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1515.866719] wlan0: authenticate with 00:22:7f:18:11:a8
[ 1515.889178] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 1515.895967] wlan0: authenticated
[ 1515.896658] wlan0: associate with 00:22:7f:18:11:a8 (try 1/3)
[ 1516.100410] wlan0: associate with 00:22:7f:18:11:a8 (try 2/3)
[ 1516.105627] wlan0: RX AssocResp from 00:22:7f:18:11:a8 (capab=0x421
status=0 aid=2)
[ 1516.106269] wlan0: associated
[ 1516.106413] cfg80211: Calling CRDA for country: US
[ 1516.115454] cfg80211: Regulatory domain changed to country: US
[ 1516.115462] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 1516.115468] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 1516.115473] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 1516.115477] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1516.115481] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1516.115485] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1516.115488] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 1521.676257] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:a8 after 500ms, disconnecting.
[ 1521.677116] cfg80211: Calling CRDA to update world regulatory domain
[ 1521.685700] cfg80211: World regulatory domain updated:
[ 1521.685707] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 1521.685712] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1521.685717] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 1521.685721] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 1521.685725] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1521.685729] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1521.844853] wlan0: authenticate with 00:22:7f:11:72:e8
[ 1521.868523] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 1522.071595] wlan0: send auth to 00:22:7f:11:72:e8 (try 2/3)
[ 1522.076280] wlan0: authenticated
[ 1522.079659] wlan0: associate with 00:22:7f:11:72:e8 (try 1/3)
[ 1522.082717] wlan0: RX AssocResp from 00:22:7f:11:72:e8 (capab=0x421
status=0 aid=4)
[ 1522.083355] wlan0: associated
[ 1522.083486] cfg80211: Calling CRDA for country: US
[ 1522.092196] cfg80211: Regulatory domain changed to country: US
[ 1522.092204] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 1522.092210] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 1522.092214] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 1522.092218] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1522.092222] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1522.092226] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1522.092230] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 1970.012684] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:11:72:e8 after 500ms, disconnecting.
[ 1970.013427] cfg80211: Calling CRDA to update world regulatory domain
[ 1970.022598] cfg80211: World regulatory domain updated:
[ 1970.022605] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 1970.022611] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1970.022615] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 1970.022619] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 1970.022623] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1970.022627] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1971.203842] wlan0: authenticate with 00:22:7f:11:72:e8
[ 1971.215294] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 1971.418541] wlan0: send auth to 00:22:7f:11:72:e8 (try 2/3)
[ 1971.622246] wlan0: send auth to 00:22:7f:11:72:e8 (try 3/3)
[ 1971.825895] wlan0: authentication with 00:22:7f:11:72:e8 timed out
[ 1973.916501] wlan0: authenticate with 00:22:7f:18:11:a8
[ 1973.939224] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 1973.945336] wlan0: authenticated
[ 1973.946820] wlan0: associate with 00:22:7f:18:11:a8 (try 1/3)
[ 1974.150524] wlan0: associate with 00:22:7f:18:11:a8 (try 2/3)
[ 1974.354225] wlan0: associate with 00:22:7f:18:11:a8 (try 3/3)
[ 1974.358639] wlan0: RX AssocResp from 00:22:7f:18:11:a8 (capab=0x421
status=0 aid=4)
[ 1974.359277] wlan0: associated
[ 1974.359419] cfg80211: Calling CRDA for country: US
[ 1974.368069] cfg80211: Regulatory domain changed to country: US
[ 1974.368077] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 1974.368082] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 1974.368087] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 1974.368091] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1974.368095] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1974.368099] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1974.368103] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 1978.004909] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:a8 after 500ms, disconnecting.
[ 1978.005662] cfg80211: Calling CRDA to update world regulatory domain
[ 1978.010505] cfg80211: World regulatory domain updated:
[ 1978.010507] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 1978.010508] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1978.010509] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 1978.010510] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 1978.010511] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1978.010512] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 1979.208619] wlan0: authenticate with 00:22:7f:18:11:98
[ 1979.231377] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 1979.233062] wlan0: authenticated
[ 1979.235036] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 1979.438719] wlan0: associate with 00:22:7f:18:11:98 (try 2/3)
[ 1979.642447] wlan0: associate with 00:22:7f:18:11:98 (try 3/3)
[ 1979.846151] wlan0: association with 00:22:7f:18:11:98 timed out
[ 1980.014804] wlan0: authenticate with 00:22:7f:18:11:d8
[ 1980.038345] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 1980.241563] wlan0: send auth to 00:22:7f:18:11:d8 (try 2/3)
[ 1980.242961] wlan0: authenticated
[ 1980.245558] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 1980.449254] wlan0: associate with 00:22:7f:18:11:d8 (try 2/3)
[ 1980.652980] wlan0: associate with 00:22:7f:18:11:d8 (try 3/3)
[ 1980.856681] wlan0: association with 00:22:7f:18:11:d8 timed out
[ 1982.068120] wlan0: authenticate with 00:22:7f:18:11:a8
[ 1982.091413] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 1982.294550] wlan0: send auth to 00:22:7f:18:11:a8 (try 2/3)
[ 1982.498245] wlan0: send auth to 00:22:7f:18:11:a8 (try 3/3)
[ 1982.701940] wlan0: authentication with 00:22:7f:18:11:a8 timed out
[ 1989.944305] wlan0: authenticate with 00:22:7f:11:72:e8
[ 1989.967554] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 1990.170919] wlan0: send auth to 00:22:7f:11:72:e8 (try 2/3)
[ 1990.374702] wlan0: send auth to 00:22:7f:11:72:e8 (try 3/3)
[ 1990.578318] wlan0: authentication with 00:22:7f:11:72:e8 timed out
[ 1995.056990] wlan0: authenticate with 00:22:7f:18:11:d8
[ 1995.080139] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 1995.283431] wlan0: send auth to 00:22:7f:18:11:d8 (try 2/3)
[ 1995.487137] wlan0: send auth to 00:22:7f:18:11:d8 (try 3/3)
[ 1995.488408] wlan0: authenticated
[ 1995.491150] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 1995.694783] wlan0: associate with 00:22:7f:18:11:d8 (try 2/3)
[ 1995.898549] wlan0: associate with 00:22:7f:18:11:d8 (try 3/3)
[ 1996.102224] wlan0: association with 00:22:7f:18:11:d8 timed out
[ 2024.513606] wlan0: authenticate with 00:22:7f:11:72:e8
[ 2024.536849] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 2024.740099] wlan0: send auth to 00:22:7f:11:72:e8 (try 2/3)
[ 2024.748235] wlan0: authenticated
[ 2024.752158] wlan0: associate with 00:22:7f:11:72:e8 (try 1/3)
[ 2024.955731] wlan0: associate with 00:22:7f:11:72:e8 (try 2/3)
[ 2025.159481] wlan0: associate with 00:22:7f:11:72:e8 (try 3/3)
[ 2025.363121] wlan0: association with 00:22:7f:11:72:e8 timed out
[ 2037.265829] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 2037.326230] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2039.539404] wlan0: authenticate with 00:22:7f:18:11:98
[ 2039.550634] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 2039.554212] wlan0: authenticated
[ 2039.558274] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 2039.560894] wlan0: RX AssocResp from 00:22:7f:18:11:98 (capab=0x421
status=0 aid=2)
[ 2039.561560] wlan0: associated
[ 2039.561633] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2039.561826] cfg80211: Calling CRDA for country: US
[ 2039.571240] cfg80211: Regulatory domain changed to country: US
[ 2039.571248] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 2039.571253] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 2039.571258] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 2039.571262] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 2039.571266] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 2039.571270] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 2039.571274] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 2612.246184] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:98 after 500ms, disconnecting.
[ 2612.246943] cfg80211: Calling CRDA to update world regulatory domain
[ 2612.255650] cfg80211: World regulatory domain updated:
[ 2612.255658] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 2612.255663] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 2612.255668] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 2612.255672] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 2612.255676] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 2612.255680] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 2613.430998] wlan0: authenticate with 00:22:7f:18:11:d8
[ 2613.453251] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 2613.455009] wlan0: authenticated
[ 2613.457034] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 2613.460027] wlan0: RX AssocResp from 00:22:7f:18:11:d8 (capab=0x421
status=0 aid=5)
[ 2613.460944] wlan0: associated
[ 2613.461106] cfg80211: Calling CRDA for country: US
[ 2613.470873] cfg80211: Regulatory domain changed to country: US
[ 2613.470880] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 2613.470886] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 2613.470890] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 2613.470894] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 2613.470898] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 2613.470902] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 2613.470906] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 2715.404076] wlan0: authenticate with 00:22:7f:18:11:a8
[ 2715.414371] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 2715.417216] wlan0: authenticated
[ 2715.417934] wlan0: associate with 00:22:7f:18:11:a8 (try 1/3)
[ 2715.422905] wlan0: RX AssocResp from 00:22:7f:18:11:a8 (capab=0x421
status=0 aid=7)
[ 2715.423540] wlan0: associated
[ 3650.242641] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:a8 after 500ms, disconnecting.
[ 3650.243358] cfg80211: Calling CRDA to update world regulatory domain
[ 3650.252123] cfg80211: World regulatory domain updated:
[ 3650.252131] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 3650.252136] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3650.252141] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 3650.252145] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 3650.252149] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3650.252153] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3651.454037] wlan0: authenticate with 00:22:7f:18:11:a8
[ 3651.465739] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 3651.467126] wlan0: authenticated
[ 3651.469434] wlan0: associate with 00:22:7f:18:11:a8 (try 1/3)
[ 3651.472349] wlan0: RX AssocResp from 00:22:7f:18:11:a8 (capab=0x421
status=0 aid=7)
[ 3651.473037] wlan0: associated
[ 3651.473176] cfg80211: Calling CRDA for country: US
[ 3651.482289] cfg80211: Regulatory domain changed to country: US
[ 3651.482299] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 3651.482305] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 3651.482309] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 3651.482313] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3651.482317] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3651.482321] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3651.482325] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 3659.229833] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:a8 after 500ms, disconnecting.
[ 3659.230442] cfg80211: Calling CRDA to update world regulatory domain
[ 3659.239159] cfg80211: World regulatory domain updated:
[ 3659.239167] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 3659.239173] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3659.239178] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 3659.239182] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 3659.239185] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3659.239189] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3660.434438] wlan0: authenticate with 00:22:7f:18:11:98
[ 3660.457107] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 3660.458947] wlan0: authenticated
[ 3660.460622] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 3660.463148] wlan0: RX AssocResp from 00:22:7f:18:11:98 (capab=0x421
status=0 aid=2)
[ 3660.463826] wlan0: associated
[ 3660.463984] cfg80211: Calling CRDA for country: US
[ 3660.473454] cfg80211: Regulatory domain changed to country: US
[ 3660.473462] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 3660.473468] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 3660.473473] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 3660.473477] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3660.473482] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3660.473485] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3660.473489] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 3801.104122] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:98 after 500ms, disconnecting.
[ 3801.104744] cfg80211: Calling CRDA to update world regulatory domain
[ 3801.113637] cfg80211: World regulatory domain updated:
[ 3801.113645] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 3801.113651] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3801.113655] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 3801.113659] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 3801.113663] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3801.113667] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3801.341196] wlan0: authenticate with 00:22:7f:18:11:d8
[ 3801.352224] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 3801.555652] wlan0: send auth to 00:22:7f:18:11:d8 (try 2/3)
[ 3801.557136] wlan0: authenticated
[ 3801.559711] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 3801.763504] wlan0: associate with 00:22:7f:18:11:d8 (try 2/3)
[ 3801.967364] wlan0: associate with 00:22:7f:18:11:d8 (try 3/3)
[ 3802.171104] wlan0: association with 00:22:7f:18:11:d8 timed out
[ 3802.339741] wlan0: authenticate with 00:22:7f:11:72:e8
[ 3802.363390] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 3802.365041] wlan0: authenticated
[ 3802.366944] wlan0: associate with 00:22:7f:11:72:e8 (try 1/3)
[ 3802.570737] wlan0: associate with 00:22:7f:11:72:e8 (try 2/3)
[ 3802.774514] wlan0: associate with 00:22:7f:11:72:e8 (try 3/3)
[ 3802.978317] wlan0: association with 00:22:7f:11:72:e8 timed out
[ 3804.177994] wlan0: authenticate with 00:22:7f:18:11:98
[ 3804.189547] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 3804.392895] wlan0: send auth to 00:22:7f:18:11:98 (try 2/3)
[ 3804.596694] wlan0: send auth to 00:22:7f:18:11:98 (try 3/3)
[ 3804.800546] wlan0: authentication with 00:22:7f:18:11:98 timed out
[ 3805.935937] wlan0: authenticate with 00:22:7f:11:72:e8
[ 3805.936136] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 3805.940705] wlan0: authenticated
[ 3805.943402] wlan0: associate with 00:22:7f:11:72:e8 (try 1/3)
[ 3806.147243] wlan0: associate with 00:22:7f:11:72:e8 (try 2/3)
[ 3806.351050] wlan0: associate with 00:22:7f:11:72:e8 (try 3/3)
[ 3806.554843] wlan0: association with 00:22:7f:11:72:e8 timed out
[ 3807.622813] wlan0: authenticate with 00:22:7f:18:11:d8
[ 3807.646313] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 3807.849623] wlan0: send auth to 00:22:7f:18:11:d8 (try 2/3)
[ 3807.850888] wlan0: authenticated
[ 3807.853598] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 3807.857182] wlan0: RX AssocResp from 00:22:7f:18:11:d8 (capab=0x421
status=0 aid=6)
[ 3807.858006] wlan0: associated
[ 3807.858157] cfg80211: Calling CRDA for country: US
[ 3807.866079] cfg80211: Regulatory domain changed to country: US
[ 3807.866081] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 3807.866083] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 3807.866084] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 3807.866085] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3807.866086] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3807.866087] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 3807.866088] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 3914.556061] wlan0: authenticate with 00:22:7f:18:11:a8
[ 3914.566339] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 3914.576445] wlan0: authenticated
[ 3914.578013] wlan0: associate with 00:22:7f:18:11:a8 (try 1/3)
[ 3914.583476] wlan0: RX AssocResp from 00:22:7f:18:11:a8 (capab=0x421
status=0 aid=7)
[ 3914.584146] wlan0: associated
[ 4216.688740] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:a8 after 500ms, disconnecting.
[ 4216.689551] cfg80211: Calling CRDA to update world regulatory domain
[ 4216.696368] cfg80211: World regulatory domain updated:
[ 4216.696375] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4216.696380] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4216.696385] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4216.696389] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4216.696393] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4216.696397] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4217.884664] wlan0: authenticate with 00:22:7f:18:11:a8
[ 4217.896040] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 4218.099380] wlan0: send auth to 00:22:7f:18:11:a8 (try 2/3)
[ 4218.303138] wlan0: send auth to 00:22:7f:18:11:a8 (try 3/3)
[ 4218.506986] wlan0: authentication with 00:22:7f:18:11:a8 timed out
[ 4220.603066] wlan0: authenticate with 00:22:7f:18:11:f8
[ 4220.625402] wlan0: send auth to 00:22:7f:18:11:f8 (try 1/3)
[ 4220.828734] wlan0: send auth to 00:22:7f:18:11:f8 (try 2/3)
[ 4221.032534] wlan0: send auth to 00:22:7f:18:11:f8 (try 3/3)
[ 4221.091328] wlan0: authenticated
[ 4221.092487] wlan0: associate with 00:22:7f:18:11:f8 (try 1/3)
[ 4221.296272] wlan0: associate with 00:22:7f:18:11:f8 (try 2/3)
[ 4221.302680] wlan0: RX AssocResp from 00:22:7f:18:11:f8 (capab=0x421
status=0 aid=1)
[ 4221.303321] wlan0: associated
[ 4221.303465] cfg80211: Calling CRDA for country: US
[ 4221.310072] cfg80211: Regulatory domain changed to country: US
[ 4221.310075] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4221.310076] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 4221.310077] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 4221.310078] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4221.310079] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4221.310080] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4221.310081] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 4248.661782] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:f8 after 500ms, disconnecting.
[ 4248.662434] cfg80211: Calling CRDA to update world regulatory domain
[ 4248.666965] cfg80211: World regulatory domain updated:
[ 4248.666972] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4248.666977] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4248.666982] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4248.666986] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4248.666990] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4248.666994] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4249.857514] wlan0: authenticate with 00:22:7f:18:11:f8
[ 4249.868901] wlan0: send auth to 00:22:7f:18:11:f8 (try 1/3)
[ 4250.072295] wlan0: send auth to 00:22:7f:18:11:f8 (try 2/3)
[ 4250.276104] wlan0: send auth to 00:22:7f:18:11:f8 (try 3/3)
[ 4250.479901] wlan0: authentication with 00:22:7f:18:11:f8 timed out
[ 4252.075494] wlan0: authenticate with 00:22:7f:11:51:38
[ 4252.098640] wlan0: send auth to 00:22:7f:11:51:38 (try 1/3)
[ 4252.302179] wlan0: send auth to 00:22:7f:11:51:38 (try 2/3)
[ 4252.303954] wlan0: authenticated
[ 4252.306171] wlan0: associate with 00:22:7f:11:51:38 (try 1/3)
[ 4252.509931] wlan0: associate with 00:22:7f:11:51:38 (try 2/3)
[ 4252.713779] wlan0: associate with 00:22:7f:11:51:38 (try 3/3)
[ 4252.727562] wlan0: RX AssocResp from 00:22:7f:11:51:38 (capab=0x421
status=0 aid=2)
[ 4252.728316] wlan0: associated
[ 4252.728457] cfg80211: Calling CRDA for country: US
[ 4252.735133] cfg80211: Regulatory domain changed to country: US
[ 4252.735136] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4252.735138] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 4252.735140] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 4252.735142] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4252.735144] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4252.735145] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4252.735147] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 4267.655337] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:11:51:38 after 500ms, disconnecting.
[ 4267.655975] cfg80211: Calling CRDA to update world regulatory domain
[ 4267.664443] cfg80211: World regulatory domain updated:
[ 4267.664451] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4267.664457] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4267.664462] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4267.664466] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4267.664469] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4267.664473] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4268.859339] wlan0: authenticate with 00:22:7f:18:11:a8
[ 4268.882621] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 4268.885942] wlan0: authenticated
[ 4268.890078] wlan0: associate with 00:22:7f:18:11:a8 (try 1/3)
[ 4269.093887] wlan0: associate with 00:22:7f:18:11:a8 (try 2/3)
[ 4269.099430] wlan0: RX AssocResp from 00:22:7f:18:11:a8 (capab=0x421
status=0 aid=5)
[ 4269.100064] wlan0: associated
[ 4269.100201] cfg80211: Calling CRDA for country: US
[ 4269.109248] cfg80211: Regulatory domain changed to country: US
[ 4269.109256] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4269.109261] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 4269.109266] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 4269.109271] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4269.109274] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4269.109278] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4269.109282] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 4767.454210] wlan0: deauthenticating from 00:22:7f:18:11:a8 by local choice
(reason=3)
[ 4767.464411] cfg80211: Calling CRDA to update world regulatory domain
[ 4767.474596] cfg80211: World regulatory domain updated:
[ 4767.474599] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4767.474600] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4767.474602] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4767.474603] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4767.474604] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4767.474605] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4768.661596] wlan0: authenticate with 00:22:7f:18:11:d8
[ 4768.685348] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 4768.686491] wlan0: authenticated
[ 4768.688930] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 4768.692100] wlan0: RX AssocResp from 00:22:7f:18:11:d8 (capab=0x421
status=0 aid=1)
[ 4768.692555] wlan0: associated
[ 4768.692625] cfg80211: Calling CRDA for country: US
[ 4768.698953] cfg80211: Regulatory domain changed to country: US
[ 4768.698956] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4768.698958] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 4768.698960] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 4768.698961] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4768.698962] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4768.698964] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4768.698965] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 4787.151008] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:d8 after 500ms, disconnecting.
[ 4787.151781] cfg80211: Calling CRDA to update world regulatory domain
[ 4787.158214] cfg80211: World regulatory domain updated:
[ 4787.158222] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4787.158227] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4787.158232] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4787.158236] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4787.158240] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4787.158244] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4787.319797] wlan0: authenticate with 00:22:7f:11:72:e8
[ 4787.343286] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 4787.345337] wlan0: authenticated
[ 4787.346902] wlan0: associate with 00:22:7f:11:72:e8 (try 1/3)
[ 4787.350020] wlan0: RX AssocResp from 00:22:7f:11:72:e8 (capab=0x421
status=0 aid=5)
[ 4787.350646] wlan0: associated
[ 4787.350780] cfg80211: Calling CRDA for country: US
[ 4787.359861] cfg80211: Regulatory domain changed to country: US
[ 4787.359868] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4787.359873] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 4787.359878] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 4787.359882] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4787.359886] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4787.359890] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4787.359894] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 4891.223238] wlan0: deauthenticating from 00:22:7f:11:72:e8 by local choice
(reason=3)
[ 4891.232275] cfg80211: Calling CRDA to update world regulatory domain
[ 4891.240459] cfg80211: World regulatory domain updated:
[ 4891.240467] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4891.240472] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4891.240477] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4891.240481] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 4891.240485] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4891.240489] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4892.497600] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 4892.558031] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4894.809075] wlan0: authenticate with 00:22:7f:18:11:98
[ 4894.820582] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 4894.826927] wlan0: authenticated
[ 4894.828312] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 4894.840069] wlan0: RX AssocResp from 00:22:7f:18:11:98 (capab=0x421
status=0 aid=2)
[ 4894.841077] wlan0: associated
[ 4894.841130] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4894.841253] cfg80211: Calling CRDA for country: US
[ 4894.849000] cfg80211: Regulatory domain changed to country: US
[ 4894.849009] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 4894.849014] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 4894.849019] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 4894.849023] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4894.849027] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4894.849031] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 4894.849035] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 5296.712545] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:98 after 500ms, disconnecting.
[ 5296.713310] cfg80211: Calling CRDA to update world regulatory domain
[ 5296.722220] cfg80211: World regulatory domain updated:
[ 5296.722232] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 5296.722241] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5296.722248] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 5296.722254] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 5296.722260] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5296.722266] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5297.920598] wlan0: authenticate with 00:22:7f:11:72:e8
[ 5297.931466] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 5298.135096] wlan0: send auth to 00:22:7f:11:72:e8 (try 2/3)
[ 5298.338851] wlan0: send auth to 00:22:7f:11:72:e8 (try 3/3)
[ 5298.542693] wlan0: authentication with 00:22:7f:11:72:e8 timed out
[ 5299.726995] wlan0: authenticate with 00:22:7f:18:11:a8
[ 5299.749944] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 5299.754940] wlan0: authenticated
[ 5299.757521] wlan0: associate with 00:22:7f:18:11:a8 (try 1/3)
[ 5299.762224] wlan0: RX AssocResp from 00:22:7f:18:11:a8 (capab=0x421
status=0 aid=1)
[ 5299.762855] wlan0: associated
[ 5299.762983] cfg80211: Calling CRDA for country: US
[ 5299.770346] cfg80211: Regulatory domain changed to country: US
[ 5299.770349] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 5299.770351] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 5299.770352] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 5299.770353] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5299.770354] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5299.770355] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5299.770356] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 5309.703898] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:a8 after 500ms, disconnecting.
[ 5309.704857] cfg80211: Calling CRDA to update world regulatory domain
[ 5309.713206] cfg80211: World regulatory domain updated:
[ 5309.713213] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 5309.713219] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5309.713224] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 5309.713228] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 5309.713232] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5309.713236] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5310.900316] wlan0: authenticate with 00:22:7f:11:51:38
[ 5310.923063] wlan0: send auth to 00:22:7f:11:51:38 (try 1/3)
[ 5311.126481] wlan0: send auth to 00:22:7f:11:51:38 (try 2/3)
[ 5311.330290] wlan0: send auth to 00:22:7f:11:51:38 (try 3/3)
[ 5311.355129] wlan0: authenticated
[ 5311.358239] wlan0: associate with 00:22:7f:11:51:38 (try 1/3)
[ 5311.562062] wlan0: associate with 00:22:7f:11:51:38 (try 2/3)
[ 5311.765888] wlan0: associate with 00:22:7f:11:51:38 (try 3/3)
[ 5311.969667] wlan0: association with 00:22:7f:11:51:38 timed out
[ 5313.172954] wlan0: authenticate with 00:22:7f:18:11:d8
[ 5313.196926] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 5313.400281] wlan0: send auth to 00:22:7f:18:11:d8 (try 2/3)
[ 5313.604081] wlan0: send auth to 00:22:7f:18:11:d8 (try 3/3)
[ 5313.807898] wlan0: authentication with 00:22:7f:18:11:d8 timed out
[ 5315.004055] wlan0: authenticate with 00:22:7f:18:11:a8
[ 5315.027130] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 5315.230505] wlan0: send auth to 00:22:7f:18:11:a8 (try 2/3)
[ 5315.434267] wlan0: send auth to 00:22:7f:18:11:a8 (try 3/3)
[ 5315.638133] wlan0: authentication with 00:22:7f:18:11:a8 timed out
[ 5316.274491] wlan0: authenticate with 00:22:7f:11:72:e8
[ 5316.297885] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 5316.304313] wlan0: authenticated
[ 5316.305418] wlan0: associate with 00:22:7f:11:72:e8 (try 1/3)
[ 5316.309235] wlan0: RX AssocResp from 00:22:7f:11:72:e8 (capab=0x421
status=0 aid=3)
[ 5316.309896] wlan0: associated
[ 5316.309946] cfg80211: Calling CRDA for country: US
[ 5316.315274] cfg80211: Regulatory domain changed to country: US
[ 5316.315276] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 5316.315278] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 5316.315279] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 5316.315280] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5316.315281] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5316.315282] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 5316.315283] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 6060.970677] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:11:72:e8 after 500ms, disconnecting.
[ 6060.979071] cfg80211: Calling CRDA to update world regulatory domain
[ 6060.987823] cfg80211: World regulatory domain updated:
[ 6060.987830] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6060.987836] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6060.987840] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6060.987845] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6060.987848] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6060.987852] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6062.187437] wlan0: authenticate with 00:22:7f:18:11:98
[ 6062.197693] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 6062.401251] wlan0: send auth to 00:22:7f:18:11:98 (try 2/3)
[ 6062.605052] wlan0: send auth to 00:22:7f:18:11:98 (try 3/3)
[ 6062.808858] wlan0: authentication with 00:22:7f:18:11:98 timed out
[ 6064.000854] wlan0: authenticate with 00:22:7f:18:11:a8
[ 6064.024004] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 6064.227484] wlan0: send auth to 00:22:7f:18:11:a8 (try 2/3)
[ 6064.233268] wlan0: authenticated
[ 6064.235475] wlan0: associate with 00:22:7f:18:11:a8 (try 1/3)
[ 6064.439269] wlan0: associate with 00:22:7f:18:11:a8 (try 2/3)
[ 6064.643105] wlan0: associate with 00:22:7f:18:11:a8 (try 3/3)
[ 6064.846880] wlan0: association with 00:22:7f:18:11:a8 timed out
[ 6065.914936] wlan0: authenticate with 00:22:7f:18:11:d8
[ 6065.938384] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 6066.141620] wlan0: send auth to 00:22:7f:18:11:d8 (try 2/3)
[ 6066.345372] wlan0: send auth to 00:22:7f:18:11:d8 (try 3/3)
[ 6066.549226] wlan0: authentication with 00:22:7f:18:11:d8 timed out
[ 6067.617290] wlan0: authenticate with 00:22:7f:11:72:e8
[ 6067.640558] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 6067.843925] wlan0: send auth to 00:22:7f:11:72:e8 (try 2/3)
[ 6067.848701] wlan0: authenticated
[ 6067.851994] wlan0: associate with 00:22:7f:11:72:e8 (try 1/3)
[ 6068.055765] wlan0: associate with 00:22:7f:11:72:e8 (try 2/3)
[ 6068.259568] wlan0: associate with 00:22:7f:11:72:e8 (try 3/3)
[ 6068.463365] wlan0: association with 00:22:7f:11:72:e8 timed out
[ 6070.546741] wlan0: authenticate with 00:22:7f:18:11:98
[ 6070.565644] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 6070.568170] wlan0: authenticated
[ 6070.569386] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 6070.773126] wlan0: associate with 00:22:7f:18:11:98 (try 2/3)
[ 6070.976928] wlan0: associate with 00:22:7f:18:11:98 (try 3/3)
[ 6071.180752] wlan0: association with 00:22:7f:18:11:98 timed out
[ 6079.382089] wlan0: authenticate with 00:22:7f:11:72:e8
[ 6079.393051] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 6079.596560] wlan0: send auth to 00:22:7f:11:72:e8 (try 2/3)
[ 6079.800327] wlan0: send auth to 00:22:7f:11:72:e8 (try 3/3)
[ 6080.004169] wlan0: authentication with 00:22:7f:11:72:e8 timed out
[ 6090.079505] wlan0: authenticate with 00:22:7f:18:11:d8
[ 6090.102850] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 6090.104541] wlan0: authenticated
[ 6090.106352] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 6090.310163] wlan0: associate with 00:22:7f:18:11:d8 (try 2/3)
[ 6090.513972] wlan0: associate with 00:22:7f:18:11:d8 (try 3/3)
[ 6090.717763] wlan0: association with 00:22:7f:18:11:d8 timed out
[ 6100.784696] wlan0: authenticate with 00:22:7f:18:11:98
[ 6100.808484] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 6100.813967] wlan0: authenticated
[ 6100.815935] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 6101.019760] wlan0: associate with 00:22:7f:18:11:98 (try 2/3)
[ 6101.030541] wlan0: RX AssocResp from 00:22:7f:18:11:98 (capab=0x421
status=0 aid=5)
[ 6101.031282] wlan0: associated
[ 6101.031418] cfg80211: Calling CRDA for country: US
[ 6101.039248] cfg80211: Regulatory domain changed to country: US
[ 6101.039256] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6101.039262] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 6101.039266] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 6101.039271] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6101.039274] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6101.039278] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6101.039282] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 6104.968011] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:98 after 500ms, disconnecting.
[ 6104.968855] cfg80211: Calling CRDA to update world regulatory domain
[ 6104.977582] cfg80211: World regulatory domain updated:
[ 6104.977589] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6104.977595] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6104.977600] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6104.977604] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6104.977608] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6104.977612] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6106.167703] wlan0: authenticate with 00:22:7f:18:11:98
[ 6106.179218] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 6106.382568] wlan0: send auth to 00:22:7f:18:11:98 (try 2/3)
[ 6106.586366] wlan0: send auth to 00:22:7f:18:11:98 (try 3/3)
[ 6106.592794] wlan0: authenticated
[ 6106.594333] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 6106.798158] wlan0: associate with 00:22:7f:18:11:98 (try 2/3)
[ 6107.001931] wlan0: associate with 00:22:7f:18:11:98 (try 3/3)
[ 6107.205763] wlan0: association with 00:22:7f:18:11:98 timed out
[ 6108.273891] wlan0: authenticate with 00:22:7f:18:11:f8
[ 6108.297087] wlan0: send auth to 00:22:7f:18:11:f8 (try 1/3)
[ 6108.395205] wlan0: authenticated
[ 6108.396636] wlan0: associate with 00:22:7f:18:11:f8 (try 1/3)
[ 6108.600433] wlan0: associate with 00:22:7f:18:11:f8 (try 2/3)
[ 6108.804216] wlan0: associate with 00:22:7f:18:11:f8 (try 3/3)
[ 6109.008014] wlan0: association with 00:22:7f:18:11:f8 timed out
[ 6117.229634] wlan0: authenticate with 00:22:7f:18:11:98
[ 6117.252509] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 6117.255275] wlan0: authenticated
[ 6117.256003] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 6117.278318] wlan0: RX AssocResp from 00:22:7f:18:11:98 (capab=0x421
status=0 aid=5)
[ 6117.278948] wlan0: associated
[ 6117.278998] cfg80211: Calling CRDA for country: US
[ 6117.281701] cfg80211: Regulatory domain changed to country: US
[ 6117.281703] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6117.281705] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 6117.281706] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 6117.281707] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6117.281708] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6117.281709] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6117.281710] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 6771.295379] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:98 after 500ms, disconnecting.
[ 6771.303728] cfg80211: Calling CRDA to update world regulatory domain
[ 6771.312200] cfg80211: World regulatory domain updated:
[ 6771.312208] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6771.312213] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6771.312218] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6771.312222] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6771.312226] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6771.312230] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6772.503207] wlan0: authenticate with 00:22:7f:18:11:98
[ 6772.522541] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 6772.725935] wlan0: send auth to 00:22:7f:18:11:98 (try 2/3)
[ 6772.929735] wlan0: send auth to 00:22:7f:18:11:98 (try 3/3)
[ 6773.133537] wlan0: authentication with 00:22:7f:18:11:98 timed out
[ 6780.823702] wlan0: authenticate with 00:22:7f:18:11:a8
[ 6780.846484] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 6781.049814] wlan0: send auth to 00:22:7f:18:11:a8 (try 2/3)
[ 6781.253677] wlan0: send auth to 00:22:7f:18:11:a8 (try 3/3)
[ 6781.457406] wlan0: authentication with 00:22:7f:18:11:a8 timed out
[ 6782.525471] wlan0: authenticate with 00:22:7f:18:11:d8
[ 6782.548799] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 6782.752202] wlan0: send auth to 00:22:7f:18:11:d8 (try 2/3)
[ 6782.956003] wlan0: send auth to 00:22:7f:18:11:d8 (try 3/3)
[ 6782.957380] wlan0: authenticated
[ 6782.959991] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 6783.163796] wlan0: associate with 00:22:7f:18:11:d8 (try 2/3)
[ 6783.367600] wlan0: associate with 00:22:7f:18:11:d8 (try 3/3)
[ 6783.571401] wlan0: association with 00:22:7f:18:11:d8 timed out
[ 6788.387875] wlan0: authenticate with 00:22:7f:18:11:d8
[ 6788.399171] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 6788.409122] wlan0: authenticated
[ 6788.410660] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 6788.614512] wlan0: associate with 00:22:7f:18:11:d8 (try 2/3)
[ 6788.818316] wlan0: associate with 00:22:7f:18:11:d8 (try 3/3)
[ 6789.022114] wlan0: association with 00:22:7f:18:11:d8 timed out
[ 6812.340460] wlan0: authenticate with 00:22:7f:18:11:d8
[ 6812.351804] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 6812.352859] wlan0: authenticated
[ 6812.355477] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 6812.358429] wlan0: RX AssocResp from 00:22:7f:18:11:d8 (capab=0x421
status=0 aid=1)
[ 6812.358746] wlan0: associated
[ 6812.358798] cfg80211: Calling CRDA for country: US
[ 6812.361567] cfg80211: Regulatory domain changed to country: US
[ 6812.361570] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6812.361572] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 6812.361573] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 6812.361574] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6812.361575] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6812.361576] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6812.361577] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 6817.842532] wlan0: authenticate with 00:22:7f:18:11:98
[ 6817.854584] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 6817.855593] wlan0: authenticated
[ 6817.858173] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 6817.862517] wlan0: RX AssocResp from 00:22:7f:18:11:98 (capab=0x421
status=0 aid=2)
[ 6817.862840] wlan0: associated
[ 6903.181724] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:98 after 500ms, disconnecting.
[ 6903.182432] cfg80211: Calling CRDA to update world regulatory domain
[ 6903.190717] cfg80211: World regulatory domain updated:
[ 6903.190725] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6903.190730] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6903.190735] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6903.190739] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6903.190743] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6903.190747] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6903.562443] wlan0: authenticate with 00:22:7f:18:11:f8
[ 6903.573711] wlan0: send auth to 00:22:7f:18:11:f8 (try 1/3)
[ 6903.777128] wlan0: send auth to 00:22:7f:18:11:f8 (try 2/3)
[ 6903.782518] wlan0: authenticated
[ 6903.785065] wlan0: associate with 00:22:7f:18:11:f8 (try 1/3)
[ 6903.793955] wlan0: RX AssocResp from 00:22:7f:18:11:f8 (capab=0x421
status=0 aid=6)
[ 6903.794660] wlan0: associated
[ 6903.794813] cfg80211: Calling CRDA for country: US
[ 6903.803156] cfg80211: Regulatory domain changed to country: US
[ 6903.803164] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6903.803170] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 6903.803174] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 6903.803178] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6903.803182] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6903.803186] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6903.803190] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 6913.168043] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:f8 after 500ms, disconnecting.
[ 6913.168847] cfg80211: Calling CRDA to update world regulatory domain
[ 6913.177453] cfg80211: World regulatory domain updated:
[ 6913.177461] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6913.177467] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6913.177471] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6913.177475] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6913.177479] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6913.177483] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6914.387791] wlan0: authenticate with 00:22:7f:18:11:f8
[ 6914.399254] wlan0: send auth to 00:22:7f:18:11:f8 (try 1/3)
[ 6914.400646] wlan0: authenticated
[ 6914.402818] wlan0: associate with 00:22:7f:18:11:f8 (try 1/3)
[ 6914.415395] wlan0: RX AssocResp from 00:22:7f:18:11:f8 (capab=0x421
status=0 aid=6)
[ 6914.416101] wlan0: associated
[ 6914.416246] cfg80211: Calling CRDA for country: US
[ 6914.423599] cfg80211: Regulatory domain changed to country: US
[ 6914.423607] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6914.423612] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 6914.423617] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 6914.423621] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6914.423625] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6914.423629] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6914.423633] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 6920.189219] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:f8 after 500ms, disconnecting.
[ 6920.189932] cfg80211: Calling CRDA to update world regulatory domain
[ 6920.199224] cfg80211: World regulatory domain updated:
[ 6920.199235] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6920.199244] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6920.199251] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6920.199258] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 6920.199265] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6920.199271] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6921.417127] wlan0: authenticate with 00:22:7f:18:11:98
[ 6921.440401] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 6921.643777] wlan0: send auth to 00:22:7f:18:11:98 (try 2/3)
[ 6921.847525] wlan0: send auth to 00:22:7f:18:11:98 (try 3/3)
[ 6922.051411] wlan0: authentication with 00:22:7f:18:11:98 timed out
[ 6923.259541] wlan0: authenticate with 00:22:7f:18:11:d8
[ 6923.282542] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 6923.485993] wlan0: send auth to 00:22:7f:18:11:d8 (try 2/3)
[ 6923.689798] wlan0: send auth to 00:22:7f:18:11:d8 (try 3/3)
[ 6923.893592] wlan0: authentication with 00:22:7f:18:11:d8 timed out
[ 6925.113479] wlan0: authenticate with 00:22:7f:18:11:f8
[ 6925.136819] wlan0: send auth to 00:22:7f:18:11:f8 (try 1/3)
[ 6925.340209] wlan0: send auth to 00:22:7f:18:11:f8 (try 2/3)
[ 6925.544000] wlan0: send auth to 00:22:7f:18:11:f8 (try 3/3)
[ 6925.747792] wlan0: authentication with 00:22:7f:18:11:f8 timed out
[ 6945.090177] wlan0: authenticate with 00:22:7f:18:11:a8
[ 6945.114148] wlan0: send auth to 00:22:7f:18:11:a8 (try 1/3)
[ 6945.316798] wlan0: send auth to 00:22:7f:18:11:a8 (try 2/3)
[ 6945.520605] wlan0: send auth to 00:22:7f:18:11:a8 (try 3/3)
[ 6945.534689] wlan0: authenticated
[ 6945.536540] wlan0: associate with 00:22:7f:18:11:a8 (try 1/3)
[ 6945.686553] wlan0: deauthenticating from 00:22:7f:18:11:a8 by local choice
(reason=3)
[ 6949.672681] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 6949.733109] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6951.979532] wlan0: authenticate with 00:22:7f:18:11:d8
[ 6952.002564] wlan0: send auth to 00:22:7f:18:11:d8 (try 1/3)
[ 6952.003676] wlan0: authenticated
[ 6952.006309] wlan0: associate with 00:22:7f:18:11:d8 (try 1/3)
[ 6952.008989] wlan0: RX AssocResp from 00:22:7f:18:11:d8 (capab=0x421
status=0 aid=1)
[ 6952.009345] wlan0: associated
[ 6952.009399] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6952.009593] cfg80211: Calling CRDA for country: US
[ 6952.015312] cfg80211: Regulatory domain changed to country: US
[ 6952.015315] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 6952.015317] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 6952.015319] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 6952.015320] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6952.015322] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6952.015323] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 6952.015325] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
[ 7268.088220] wlan0: authenticate with 00:22:7f:18:11:98
[ 7268.098711] wlan0: send auth to 00:22:7f:18:11:98 (try 1/3)
[ 7268.100002] wlan0: authenticated
[ 7268.102257] wlan0: associate with 00:22:7f:18:11:98 (try 1/3)
[ 7268.105120] wlan0: RX AssocResp from 00:22:7f:18:11:98 (capab=0x421
status=0 aid=5)
[ 7268.105752] wlan0: associated
[ 8438.726018] ieee80211 phy0: wlan0: No probe response from AP
00:22:7f:18:11:98 after 500ms, disconnecting.
[ 8438.726765] cfg80211: Calling CRDA to update world regulatory domain
[ 8438.735244] cfg80211: World regulatory domain updated:
[ 8438.735252] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 8438.735257] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 8438.735262] cfg80211: (2457000 KHz - 2482000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 8438.735266] cfg80211: (2474000 KHz - 2494000 KHz < at > 20000 KHz), (300 mBi,
2000 mBm)
[ 8438.735270] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 8438.735274] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 8439.917869] wlan0: authenticate with 00:22:7f:11:72:e8
[ 8439.937301] wlan0: send auth to 00:22:7f:11:72:e8 (try 1/3)
[ 8439.941105] wlan0: authenticated
[ 8439.944751] wlan0: associate with 00:22:7f:11:72:e8 (try 1/3)
[ 8439.949943] wlan0: RX AssocResp from 00:22:7f:11:72:e8 (capab=0x421
status=0 aid=2)
[ 8439.950581] wlan0: associated
[ 8439.950707] cfg80211: Calling CRDA for country: US
[ 8439.959153] cfg80211: Regulatory domain changed to country: US
[ 8439.959161] cfg80211: (start_freq - end_freq < at > bandwidth),
(max_antenna_gain, max_eirp)
[ 8439.959166] cfg80211: (2402000 KHz - 2472000 KHz < at > 40000 KHz), (300 mBi,
2700 mBm)
[ 8439.959171] cfg80211: (5170000 KHz - 5250000 KHz < at > 40000 KHz), (300 mBi,
1700 mBm)
[ 8439.959175] cfg80211: (5250000 KHz - 5330000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 8439.959179] cfg80211: (5490000 KHz - 5600000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 8439.959182] cfg80211: (5650000 KHz - 5710000 KHz < at > 40000 KHz), (300 mBi,
2000 mBm)
[ 8439.959186] cfg80211: (5735000 KHz - 5835000 KHz < at > 40000 KHz), (300 mBi,
3000 mBm)
Could be wpa_supplicant issue too, have updated to version 2, but same issue.
Doesn't happen when booting different OS with manufacture drivers.
</pre>
Benjamin Daines
2013-03-26T01:46:20
-
GPS tracker with multi discrete input and output /Attn: purchase manager与您共享了相册。
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13755
<pre>Tips: GPS tracker with multi discrete input and output /Attn: purchase
manager
Dear Sir
This is Anna,the sales manager of Redview GPS in China.
VT310 is a GPS tracker with 5 discrete inputs ,5 discrete outputs
and 2 analog ports . With VT310,you can get vehicle windows status, door
status, engine status, temperature and tank fuel level ,etc. This is widely
used in truck tracking application.
I would appreciate if you forward this letter to Technical Manager
or to other expert responsible for technical integration of new products in
your company, or provide me with his contact for we could discuss all the
details of our future cooperation.
Your early reply is highly appreciated.
Best Regards
Anna
https://picasaweb.google.com/lh/sredir?uname=111451185902249061112&target=ALBUM&id=5851072176732225505&authkey=Gv1sRgCPPk4LOxteH7igE&invite=CLTdnMMC&feat=email
_______________________________________________
b43-dev mailing list
b43-dev-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r< at >public.gmane.org
http://lists.infradead.org/mailman/listinfo/b43-dev
</pre>
GPS tracker with multi discrete input and output /Attn: purchase manager
2013-03-23T01:30:22
-
[PATCH 1/6] b43: N-PHY: use enum for RAIL type
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13751
<pre>---
drivers/net/wireless/b43/phy_n.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index e014a7a..0a8165de 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
< at >< at > -79,6 +79,11 < at >< at > enum b43_nphy_rssi_type {
B43_NPHY_RSSI_TBD,
};
+enum n_rail_type {
+N_RAIL_I = 0,
+N_RAIL_Q = 1,
+};
+
static inline bool b43_nphy_ipa(struct b43_wldev *dev)
{
enum ieee80211_band band = b43_current_band(dev->wl);
< at >< at > -1207,7 +1212,8 < at >< at > static void b43_nphy_run_samples(struct b43_wldev *dev, u16 samps, u16 loops,
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/ScaleOffsetRssi */
static void b43_nphy_scale_offset_rssi(struct b43_wldev *dev, u16 scale,
-s8 offset, u8 core, u8 rail,
+s8 offset, u8 core,
+ enum n_rail_type rail,
enum b43_nphy_rssi_type type)
{
u16 tmp;
< at >< at > -1606,8 +1612,8 < at >< at > static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
if (!(rx_core_state & (1 << core)))
continue;
r = core ? B2056_RX1 : B2056_RX0;
-b43_nphy_scale_offset_rssi(dev, 0, 0, core + 1, 0, 2);
-b43_nphy_scale_offset_rssi(dev, 0, 0, core + 1, 1, 2);
+b43_nphy_scale_offset_rssi(dev, 0, 0, core + 1, N_RAIL_I, 2);
+b43_nphy_scale_offset_rssi(dev, 0, 0, core + 1, N_RAIL_Q, 2);
for (i = 0; i < 8; i++) {
b43_radio_maskset(dev, r | B2056_RX_RSSI_MISC, 0xE3,
i << 2);
< at >< at > -1647,7 +1653,7 < at >< at > static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
offset[i] = -32;
b43_nphy_scale_offset_rssi(dev, 0, offset[i],
(i / 2 == 0) ? 1 : 2,
- (i % 2 == 0) ? 0 : 1,
+ (i % 2 == 0) ? N_RAIL_I : N_RAIL_Q,
2);
}
}
< at >< at > -1655,8 +1661,10 < at >< at > static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
if (!(rx_core_state & (1 << core)))
continue;
for (i = 0; i < 2; i++) {
-b43_nphy_scale_offset_rssi(dev, 0, 0, core + 1, 0, i);
-b43_nphy_scale_offset_rssi(dev, 0, 0, core + 1, 1, i);
+b43_nphy_scale_offset_rssi(dev, 0, 0, core + 1,
+ N_RAIL_I, i);
+b43_nphy_scale_offset_rssi(dev, 0, 0, core + 1,
+ N_RAIL_Q, i);
b43_nphy_poll_rssi(dev, i, poll_results, 8);
for (j = 0; j < 4; j++) {
if (j / 2 == core) {
< at >< at > -1782,8 +1790,8 < at >< at > static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
state[3] = b43_radio_read16(dev, B2055_C2_SP_RSSI) & 0x07;
b43_nphy_rssi_select(dev, 5, type);
-b43_nphy_scale_offset_rssi(dev, 0, 0, 5, 0, type);
-b43_nphy_scale_offset_rssi(dev, 0, 0, 5, 1, type);
+b43_nphy_scale_offset_rssi(dev, 0, 0, 5, N_RAIL_I, type);
+b43_nphy_scale_offset_rssi(dev, 0, 0, 5, N_RAIL_Q, type);
for (i = 0; i < 4; i++) {
u8 tmp[4];
< at >< at > -1836,7 +1844,7 < at >< at > static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
offset[i] = code - 32;
core = (i / 2) ? 2 : 1;
-rail = (i % 2) ? 1 : 0;
+rail = (i % 2) ? N_RAIL_Q : N_RAIL_I;
b43_nphy_scale_offset_rssi(dev, 0, offset[i], core, rail,
type);
</pre>
Rafał Miłecki
2013-03-20T18:15:47
-
[PATCH] b43: HT-PHY: use enum for RSSI types
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13740
<pre>---
drivers/net/wireless/b43/phy_ht.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_ht.c b/drivers/net/wireless/b43/phy_ht.c
index ccd70ac..b443530 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
< at >< at > -30,6 +30,17 < at >< at >
#include "radio_2059.h"
#include "main.h"
+/* Force values to keep compatibility with wl */
+enum ht_rssi_type {
+HT_RSSI_W1 = 0,
+HT_RSSI_W2 = 1,
+HT_RSSI_NB = 2,
+HT_RSSI_IQ = 3,
+HT_RSSI_TSSI_2G = 4,
+HT_RSSI_TSSI_5G = 5,
+HT_RSSI_TBD = 6,
+};
+
/**************************************************
* Radio 2059.
**************************************************/
< at >< at > -383,7 +394,7 < at >< at > static void b43_phy_ht_tx_tone(struct b43_wldev *dev)
**************************************************/
static void b43_phy_ht_rssi_select(struct b43_wldev *dev, u8 core_sel,
- u8 rssi_type)
+ enum ht_rssi_type rssi_type)
{
static const u16 ctl_regs[3][2] = {
{ B43_PHY_HT_AFE_C1, B43_PHY_HT_AFE_C1_OVER, },
< at >< at > -404,7 +415,7 < at >< at > static void b43_phy_ht_rssi_select(struct b43_wldev *dev, u8 core_sel,
continue;
switch (rssi_type) {
-case 4:
+case HT_RSSI_TSSI_2G:
b43_phy_set(dev, ctl_regs[core][0], 0x3 << 8);
b43_phy_set(dev, ctl_regs[core][0], 0x3 << 10);
b43_phy_set(dev, ctl_regs[core][1], 0x1 << 9);
< at >< at > -422,8 +433,8 < at >< at > static void b43_phy_ht_rssi_select(struct b43_wldev *dev, u8 core_sel,
}
}
-static void b43_phy_ht_poll_rssi(struct b43_wldev *dev, u8 type, s32 *buf,
- u8 nsamp)
+static void b43_phy_ht_poll_rssi(struct b43_wldev *dev, enum ht_rssi_type type,
+ s32 *buf, u8 nsamp)
{
u16 phy_regs_values[12];
static const u16 phy_regs_to_save[] = {
< at >< at > -549,7 +560,7 < at >< at > static void b43_phy_ht_tx_power_ctl_idle_tssi(struct b43_wldev *dev)
b43_phy_ht_tx_tone(dev);
udelay(20);
-b43_phy_ht_poll_rssi(dev, 4, rssi_buf, 1);
+b43_phy_ht_poll_rssi(dev, HT_RSSI_TSSI_2G, rssi_buf, 1);
b43_phy_ht_stop_playback(dev);
b43_phy_ht_reset_cca(dev);
</pre>
Rafał Miłecki
2013-03-19T17:14:26
-
[RFT][PATCH] b43: HT-PHY: disable TX power control on BCM94331X19
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13737
<pre>In case of BCM94331X19 default TX state seems to perform better than
after our configuration. Disable TX power control for now on this card
(until fixing power control).
---
David: could you test this for me, please? Can you see that
message in dmesg? Does it brings you back a better perofmrnce?
Simply apply it on top of wireless-testing.
---
drivers/net/wireless/b43/phy_ht.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/b43/phy_ht.c b/drivers/net/wireless/b43/phy_ht.c
index b866770..e5cbe26 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
< at >< at > -807,6 +807,11 < at >< at > static void b43_phy_ht_op_prepare_structs(struct b43_wldev *dev)
for (i = 0; i < 3; i++)
phy_ht->bb_mult_save[i] = -1;
+
+if (dev->dev->board_type == 0x00D6) {
+pr_warn("BCM94331X19 detected, disabling TX power control for better performace\n");
+phy_ht->tx_pwr_ctl = false;
+}
}
static int b43_phy_ht_op_init(struct b43_wldev *dev)
</pre>
Rafał Miłecki
2013-03-19T12:41:31
-
Extracting (boardvendor and) boardtype
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13725
<pre>It seems Broadcom does some per-card decisions
(workarounds/hacks/adjustments) using "boardtype" value. We have few
values defined:
#define SSB_BOARD_BCM94306MP0x0418
#define SSB_BOARD_BCM4309G0x0421
#define SSB_BOARD_BCM4306CB0x0417
#define SSB_BOARD_BCM4309MP0x040C
#define SSB_BOARD_MP43180x044A
#define SSB_BOARD_BU43060x0416
#define SSB_BOARD_BU43090x040A
but bcmdevs.h actually contains tons of them.
To see how we currently extract it, please see ssb_pci_get_boardinfo:
bi->vendor = bus->host_pci->subsystem_vendor;
bi->type = bus->host_pci->subsystem_device;
or bcma_host_pci_probe:
bus->boardinfo.vendor = bus->host_pci->subsystem_vendor;
bus->boardinfo.type = bus->host_pci->subsystem_device;
However I suspect maybe we should extract board_type from SPROM [0] offset 0x4.
I tried to understand how Broadcom handles that but can't follow that.
First of all they seem to have abstration to the abstration of
abstration. They keep boardtype in 3 or more structs copying them all
around. I suspect they extract board_type in si_nvram_process (which
is called always, not just on SOCs where we actually have NVRAM).
The easy part is that they preference about source of "boardtype" value is:
1) si_getdevpathintvar(..., "boardtype")
2) getintvar(..., "boardtype")
3) read(PCI_CFG_SVID) >> 16
I don't understand how getdevpathintvar / getintvar works. The
forwardtrace seems to be:
si_getdevpathintvar
getintvar
PHY_GETVAR
phy_getvar
The problem is that phy_getvar iterates over pi->vars. I have no idea
what is this set to. This variable is set in about 20 places in about
3 different structs. I don't know... does it have any relation to the
pci_sromvars?
Does anyone understand this? Better than me hopefully? Should we
extract board_type from SPROM and use subsystem id only as a fallback?
[0] http://bcm-v4.sipsolutions.net/SPROM
</pre>
Rafał Miłecki
2013-03-19T09:48:21
-
[PATCH 1/2] b43: HT-PHY: define regs for power estimation
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13721
<pre>In MMIO dumps of ndiswrapper there are following PHY ops:
phy_read(0x0118) -> 0x013d
phy_read(0x01ed) -> 0x993d
phy_read(0x0119) -> 0x012f
phy_read(0x01ee) -> 0x992f
phy_read(0x011a) -> 0x0139
phy_read(0x0969) -> 0x9939
It matches the code of wlc_phy_txpower_est_power_nphy (from brcm80211),
so we know the registers meaning.
Signed-off-by: Rafał Miłecki <zajec5< at >gmail.com>
---
drivers/net/wireless/b43/phy_ht.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/b43/phy_ht.h b/drivers/net/wireless/b43/phy_ht.h
index 9b2408e..6cae370 100644
--- a/drivers/net/wireless/b43/phy_ht.h
+++ b/drivers/net/wireless/b43/phy_ht.h
< at >< at > -23,6 +23,9 < at >< at >
#define B43_PHY_HT_SAMP_WAIT_CNT0x0C5/* Sample wait count */
#define B43_PHY_HT_SAMP_DEP_CNT0x0C6/* Sample depth count */
#define B43_PHY_HT_SAMP_STAT0x0C7/* Sample status */
+#define B43_PHY_HT_EST_PWR_C10x118
+#define B43_PHY_HT_EST_PWR_C20x119
+#define B43_PHY_HT_EST_PWR_C30x11A
#define B43_PHY_HT_TSSIMODE0x122/* TSSI mode */
#define B43_PHY_HT_TSSIMODE_EN0x0001/* TSSI enable */
#define B43_PHY_HT_TSSIMODE_PDEN0x0002/* Power det enable */
< at >< at > -53,6 +56,8 < at >< at >
#define B43_PHY_HT_TXPCTL_TARG_PWR_C1_SHIFT0
#define B43_PHY_HT_TXPCTL_TARG_PWR_C20xFF00/* Power 1 */
#define B43_PHY_HT_TXPCTL_TARG_PWR_C2_SHIFT8
+#define B43_PHY_HT_TX_PCTL_STATUS_C10x1ED
+#define B43_PHY_HT_TX_PCTL_STATUS_C20x1EE
#define B43_PHY_HT_TXPCTL_CMD_C20x222
#define B43_PHY_HT_TXPCTL_CMD_C2_INIT0x007F
#define B43_PHY_HT_RSSI_C10x219
< at >< at > -97,6 +102,7 < at >< at >
#define B43_PHY_HT_TXPCTL_TARG_PWR2B43_PHY_EXTG(0x166)/* TX power control target power */
#define B43_PHY_HT_TXPCTL_TARG_PWR2_C30x00FF
#define B43_PHY_HT_TXPCTL_TARG_PWR2_C3_SHIFT0
+#define B43_PHY_HT_TX_PCTL_STATUS_C3B43_PHY_EXTG(0x169)
#define B43_PHY_HT_TESTB43_PHY_N_BMODE(0x00A)
</pre>
Rafał Miłecki
2013-03-18T06:45:17
-
[PATCH 0/4] more HT-PHY improvements
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13717
<pre>That are patches from my git repo [0] [1], just sending them to see if
you have any comments. I'll send them to John later, in a bigger pack,
or maybe will ask him to pull the tree.
[0] git://git.infradead.org/users/rafal/b43-next.git
[1] http://git.infradead.org/users/rafal/b43-next.git
Rafał Miłecki (4):
b43: HT-PHY: rename defines addressing cores on the 2059 radio
b43: HT-PHY: tables: don't duplicate core-generic regs
b43: HT-PHY: finish calculating values for idle TSSI
b43: HT-PHY: do some extra TSSI setup after configuring TX
drivers/net/wireless/b43/phy_ht.c | 86 +++++++++++++++++++++------------
drivers/net/wireless/b43/radio_2059.c | 39 ++++-----------
drivers/net/wireless/b43/radio_2059.h | 14 ++----
3 files changed, 66 insertions(+), 73 deletions(-)
</pre>
Rafał Miłecki
2013-03-17T18:00:17
-
b43 git tree
http://comments.gmane.org/gmane.linux.drivers.bcm54xx.devel/13713
<pre>Thanks to David I have now place for my own git kernel tree:
http://git.infradead.org/users/rafal/b43-next.git
Ofc my plan is to put b43 patches there.
This tree can't be considered stable, I'll rebase it and (probably)
remove/rework some commits from time to time.
I hope it will help me preparing patches for John.
</pre>
Rafał Miłecki
2013-03-16T22:39:39
Search Engine
Search the mailing list at Gmane
query
http://search.gmane.org/?group=$group=gmane.linux.drivers.bcm54xx.devel