gmane.linux.colinux.devel

[ colinux-Bugs-2357595 ] Some network card can'twork well with ndis-bridge

SourceForge.net — 2008-12-02T21:21:33

Bugs item #2357595, was opened at 2008-11-29 02:59 Message generated for change (Comment added) made by nobody You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357595&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v0.8.x (devel) Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: Some network card can't work well with ndis-bridge Initial Comment: "Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller", this card is integrated with asus p5q-se motherboard(I have updated to the latest driver), ping between the host and the colinux will hang the host(but arping works well). I also tested another card "Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC", it is integrated with giga ep31 motherboard, but it did not have this problem. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-12-02 21:21 Message: The real problem is NdisSend() with dest == hostMac, previous comment is wrong. Drop packet with dest == OID_802_3_CURRENT_ADDRESS fix it, but host & guest can't commucation anymore. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-12-01 14:25 Message: After some research, I think the problem is packet forward loop. Filtering out packets from virtual mac to self/broadcast packets seems fix it. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-12-01 13:42 Message: New snapshot 1130 solve the Non-IP packet problem. This time I meet this bug too, my card is Atheros L2. ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2008-11-30 23:16 Message: What does the problem, if you replace the ndis-bridge with pcap-bridge? Today the filter rule for ndis-bridge was changed. Perhaps this solves your problem? ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357595&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Bugs-2357595 ] Some network card can'twork well with ndis-bridge

SourceForge.net — 2008-12-01T14:25:44

Bugs item #2357595, was opened at 2008-11-29 02:59 Message generated for change (Comment added) made by nobody You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357595&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v0.8.x (devel) Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: Some network card can't work well with ndis-bridge Initial Comment: "Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller", this card is integrated with asus p5q-se motherboard(I have updated to the latest driver), ping between the host and the colinux will hang the host(but arping works well). I also tested another card "Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC", it is integrated with giga ep31 motherboard, but it did not have this problem. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-12-01 14:25 Message: After some research, I think the problem is packet forward loop. Filtering out packets from virtual mac to self/broadcast packets seems fix it. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-12-01 13:42 Message: New snapshot 1130 solve the Non-IP packet problem. This time I meet this bug too, my card is Atheros L2. ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2008-11-30 23:16 Message: What does the problem, if you replace the ndis-bridge with pcap-bridge? Today the filter rule for ndis-bridge was changed. Perhaps this solves your problem? ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357595&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Bugs-2357595 ] Some network card can'twork well with ndis-bridge

SourceForge.net — 2008-12-01T13:42:42

Bugs item #2357595, was opened at 2008-11-29 02:59 Message generated for change (Comment added) made by nobody You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357595&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v0.8.x (devel) Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: Some network card can't work well with ndis-bridge Initial Comment: "Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller", this card is integrated with asus p5q-se motherboard(I have updated to the latest driver), ping between the host and the colinux will hang the host(but arping works well). I also tested another card "Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC", it is integrated with giga ep31 motherboard, but it did not have this problem. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-12-01 13:42 Message: New snapshot 1130 solve the Non-IP packet problem. This time I meet this bug too, my card is Atheros L2. ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2008-11-30 23:16 Message: What does the problem, if you replace the ndis-bridge with pcap-bridge? Today the filter rule for ndis-bridge was changed. Perhaps this solves your problem? ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357595&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

autobuild org.colinux.devel 20081130 23:03:20

coLinux autobuild — 2008-12-01T05:06:59

The autobuild system has detected a new revision in the source repository. Review last changed from changelog.txt, also attached in mail. Download the compiled version: http://www.henrynestler.com/colinux/autobuild/devel-20081130/ colinux-0.8.0-20081130.src.tgz (694335 Bytes) daemons-0.8.0-20081130.dbg.zip (595192 Bytes) daemons-0.8.0-20081130.zip (480551 Bytes) Note, the autobuild compilation does not include an installer. Remember to reload the driver with these commands: colinux-daemon.exe --remove-driver colinux-daemon.exe --install-driver The vmlinux and modules are up to date. Please use last version from http://www.henrynestler.com/colinux/autobuild/devel-20081129/ The autobuild compilations are not official releases of Cooperative Linux software. There is no warranty that any autobuild version is stable. If use this autobuild version, please give us feedback of your experience. Job runs on machine with 64 bit version of gcc 4.1.2. A service from http://gcc.gnu.org/wiki/CompileFarm

[ colinux-Bugs-2152550 ] rsync cannot set mtimecorrectly on cofs

SourceForge.net — 2008-11-30T23:23:24

Bugs item #2152550, was opened at 2008-10-08 05:29 Message generated for change (Settings changed) made by henryn You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2152550&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v0.8.x (devel) Resolution: Fixed Priority: 5 Private: No Submitted By: Xuefer (xuefer) Assigned to: Henry N. (henryn) Summary: rsync cannot set mtime correctly on cofs Initial Comment: $ cd ~ (native mount, non-cofs, good result) $ rm -f a b; touch -d 1970-1-1 a ; rsync -a a b; ls --full-time a b ; rm -f a b-rw-r--r-- 1 xuefer xuefer 0 1970-01-01 00:00:00.000000000 +0800 a -rw-r--r-- 1 xuefer xuefer 0 1970-01-01 00:00:00.000000000 +0800 b $ cd /c/tmp (cofs mount, wrong result) $ rm -f a b; touch -d 1970-1-1 a ; rsync -a a b; ls --full-time a b ; rm -f a b-rwxr-xr-x 1 xuefer users 0 1970-01-01 00:00:00.000000000 +0800 a* -rwxr-xr-x 1 xuefer users 0 2008-10-08 11:29:22.000000000 +0800 b* ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2008-10-27 23:55 Message: This bug is fixed by SVN revision r1127 and has nothing to do with nocache and Bug #2176188. The parameter for set atime and mtime are swapped by wrong variable names. The current snapshot http://www.colinux.org/snapshots/ includes this change. For rsync test have added "stat a b", this shows the swapped times. The test script: cd /mnt/temp rm -f a b sleep 1 touch -d 1970-1-1 a rsync -a a b ls --full-time a b stat a b Before r1127 (non interesting lines removed): -rwxr-xr-x 1 root root 0 1970-01-01 00:00:00.000000000 +0000 a -rwxr-xr-x 1 root root 0 2008-10-27 22:31:25.000000000 +0000 b File: `a' Access: 1970-01-01 00:00:00.000000000 +0000 Modify: 1970-01-01 00:00:00.000000000 +0000 Change: 2008-10-27 22:31:27.000000000 +0000 File: `b' Access: 1970-01-01 00:00:00.000000000 +0000 Modify: 2008-10-27 22:31:25.000000000 +0000 Change: 2008-10-27 22:31:27.000000000 +0000 After r1127 (non interesting lines removed): -rw-r--r-- 1 root root 0 1970-01-01 00:00:00.000000000 +0000 a -rw-r--r-- 1 root root 0 1970-01-01 00:00:00.000000000 +0000 b File: `a' Access: 1970-01-01 00:00:00.000000000 +0000 Modify: 1970-01-01 00:00:00.000000000 +0000 Change: 2008-10-27 22:37:22.000000000 +0000 File: `b' Access: 2008-10-27 22:37:22.000000000 +0000 Modify: 1970-01-01 00:00:00.000000000 +0000 Change: 2008-10-27 22:37:22.000000000 +0000 The same script on /tmp (cobd), have same times: -rw-r--r-- 1 root root 0 1970-01-01 00:00:00.000000000 +0000 a -rw-r--r-- 1 root root 0 1970-01-01 00:00:00.000000000 +0000 b File: `a' Access: 1970-01-01 00:00:00.000000000 +0000 Modify: 1970-01-01 00:00:00.000000000 +0000 Change: 2008-10-27 22:56:18.000000000 +0000 File: `b' Access: 2008-10-27 22:56:18.000000000 +0000 Modify: 1970-01-01 00:00:00.000000000 +0000 Change: 2008-10-27 22:56:18.000000000 +0000 ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2008-10-26 21:55 Message: This is a duplicate of bug# 2176188 "file sync wrong on cofs". Rsync creates temporally files like ".b..b8jlLdx". Than rsync tries to change attributes after rename. The rename is not complete from async file close, so the file can't reopen shortly for time modifications. As workaround you can add "nocache" to the mount options, then it works. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2152550&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Bugs-2357595 ] Some network card can'twork well with ndis-bridge

SourceForge.net — 2008-11-30T23:16:33

Bugs item #2357595, was opened at 2008-11-29 03:59 Message generated for change (Comment added) made by henryn You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357595&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v0.8.x (devel) Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: Some network card can't work well with ndis-bridge Initial Comment: "Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller", this card is integrated with asus p5q-se motherboard(I have updated to the latest driver), ping between the host and the colinux will hang the host(but arping works well). I also tested another card "Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC", it is integrated with giga ep31 motherboard, but it did not have this problem. ---------------------------------------------------------------------- Date: 2008-12-01 00:16 Message: What does the problem, if you replace the ndis-bridge with pcap-bridge? Today the filter rule for ndis-bridge was changed. Perhaps this solves your problem? ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357595&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Bugs-2365031 ] NDIS bridge with AOEsupport?

SourceForge.net — 2008-11-30T23:13:31

Bugs item #2365031, was opened at 2008-11-30 16:39 Message generated for change (Comment added) made by henryn You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2365031&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Daemons (Windows) Group: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: NDIS bridge with AOE support? Initial Comment: Please add AOE (ATA over ethernet), ethernet type 0x88A2 to NDIS bridge filter. pcap-bridge is too sloww..... to use, NDIS bridge is good, but only forward ARP and IP packets. ---------------------------------------------------------------------- Date: 2008-12-01 00:13 Message: This is similar to Bug #2357494. The new filter rule is "(ether dst mac) or (ether broadcast)". More the same as under pcap-bridge. Only multicast have not enabled. Is committed as SVN revision r1151. Please check the version from next autobuild. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2365031&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Bugs-2357494 ] ndis-bridge can't workwell with pppoe

SourceForge.net — 2008-11-30T23:10:43

Bugs item #2357494, was opened at 2008-11-29 03:12 Message generated for change (Comment added) made by henryn You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357494&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v0.8.x (devel) Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: ndis-bridge can't work well with pppoe Initial Comment: I tried to use pppoe in colinux, but pppoeconf can't find modem when using ndis-bridge, changing to pcap-bridge did not have this problem ---------------------------------------------------------------------- Date: 2008-12-01 00:10 Message: The new filter rule is "(ether dst mac) or (ether broadcast)". More the same as under pcap-bridge. Only multicast have not enabled. I was able to use pppoeconf and a connection was established. Is committed as SVN revision r1151. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-11-30 16:44 Message: Yes, ndis-bridge only support ARP/IP protocol. It doesn't support AOE (in my case) & PPPOE. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357494&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Bugs-2357494 ] ndis-bridge can't workwell with pppoe

SourceForge.net — 2008-11-30T15:44:46

Bugs item #2357494, was opened at 2008-11-29 02:12 Message generated for change (Comment added) made by nobody You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357494&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v0.8.x (devel) Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: ndis-bridge can't work well with pppoe Initial Comment: I tried to use pppoe in colinux, but pppoeconf can't find modem when using ndis-bridge, changing to pcap-bridge did not have this problem ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-11-30 15:44 Message: Yes, ndis-bridge only support ARP/IP protocol. It doesn't support AOE (in my case) & PPPOE. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357494&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Bugs-2365031 ] NDIS bridge with AOEsupport?

SourceForge.net — 2008-11-30T15:39:47

Bugs item #2365031, was opened at 2008-11-30 15:39 Message generated for change (Tracker Item Submitted) made by Item Submitter You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2365031&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Daemons (Windows) Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: NDIS bridge with AOE support? Initial Comment: Please add AOE (ATA over ethernet), ethernet type 0x88A2 to NDIS bridge filter. pcap-bridge is too sloww..... to use, NDIS bridge is good, but only forward ARP and IP packets. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2365031&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

autobuild org.colinux.devel 20081129 23:25:06

coLinux autobuild — 2008-11-30T05:11:22

The autobuild system has detected a new revision in the source repository. Review last changed from changelog.txt, also attached in mail. Download the compiled version: http://www.henrynestler.com/colinux/autobuild/devel-20081129/ colinux-0.8.0-20081129.src.tgz (694348 Bytes) daemons-0.8.0-20081129.dbg.zip (595212 Bytes) daemons-0.8.0-20081129.zip (480570 Bytes) modules-2.6.22.18-co-0.8.0-20081129.tgz (2603040 Bytes) vmlinux-2.6.22.18-co-0.8.0-20081129.zip (1762481 Bytes) Note, the autobuild compilation does not include an installer. Remember to reload the driver with these commands: colinux-daemon.exe --remove-driver colinux-daemon.exe --install-driver Inside coLinux please update modules as follow: rm -rf /lib/modules/*-co-* tar -xzf modules-*-co-*-20081129.tgz -C / The autobuild compilations are not official releases of Cooperative Linux software. There is no warranty that any autobuild version is stable. If use this autobuild version, please give us feedback of your experience. Job runs on machine with 64 bit version of gcc 4.1.2. A service from http://gcc.gnu.org/wiki/CompileFarm

[ colinux-Feature Requests-1591412 ] 64bit colinuxto run on Windows Server 2003 64 bit

SourceForge.net — 2008-11-30T00:38:40

Feature Requests item #1591412, was opened at 2006-11-06 15:55 Message generated for change (Comment added) made by henryn You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622066&aid=1591412&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: 64bit colinux to run on Windows Server 2003 64 bit Initial Comment: Would anybody have a build of 64bit colinux to run on Windows Server 2003 64 bit? ---------------------------------------------------------------------- Date: 2008-11-30 01:38 Message: Have started a Dashboard for 64 bit in the Wiki: http://colinux.wikia.com/wiki/Dashboard_for_developing_a_64_bit_coLinux Developers wanted! This is not a Bug, I move it to Feature Request now. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2006-11-06 17:09 Message: Logged In: NO Sorry, looks like it was asked and answered before - coLinux does not run on 64bit Windows. Work is needed to port linux.sys driver to 64 bit. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622066&aid=1591412&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Bugs-2359423 ] cofs: "rm -r" fails ondirectories with more as 200 files

SourceForge.net — 2008-11-30T00:31:11

Bugs item #2359423, was opened at 2008-11-29 18:54 Message generated for change (Settings changed) made by henryn You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2359423&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Henry N. (henryn) Assigned to: Nobody/Anonymous (nobody) Initial Comment: If a directory has more as 200 entries the call "rm -r testdir" fails with: rm: cannot remove `testdir/file-000.tmp': No such file or directory rm: cannot remove `testdir/file-001.tmp': No such file or directory rm: cannot remove `testdir/file-002.tmp': No such file or directory ... rm: cannot remove `testdir/file-200.tmp': No such file or directory A "rm -rf testdir" on such directories goes in an endless loop with full cpu load. The rm command can simple break with "CTRL-C". A "cd testdir; rm *" works without problems. After the rm all files are removed. So, the rm is working, but not the "-r" option. All coLinux versions have this problem (tested 0.7.2, 0.7.3, 0.8.0). This problem I have only under Debian 4.0 Etch. On Debian 3.0 (Wooody), all works without problems. The script creates 201 files (from 000 to 200). If there are only 200 or less files in the directory, than it works. You can test it by change the 200 in the script to any lower value, for example 199, 100 or so. #!/bin/bash -e # create a list of files rm -rf testdir mkdir testdir cd testdir COUNT=0 while test $COUNT -le 200 do NAME=$COUNT test $NAME -le 99 && NAME=0$NAME test $NAME -le 9 && NAME=0$NAME echo "$NAME" touch file-$NAME.tmp COUNT=$(($COUNT+1)) done cd .. rm -r testdir ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2359423&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Bugs-2176188 ] file sync wrong on cofs,command after mv/rename fails

SourceForge.net — 2008-11-30T00:30:20

Bugs item #2176188, was opened at 2008-10-18 09:20 Message generated for change (Comment added) made by henryn You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2176188&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v0.8.x (devel) Status: Open Resolution: Fixed Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Henry N. (henryn) Summary: file sync wrong on cofs, command after mv/rename fails Initial Comment: I found some problem in cofs filesystem. ex: mv t1 t2 stat t2 many times I got "t2 not found". it see like the second command exec before the first finished. ---------------------------------------------------------------------- Date: 2008-11-30 01:30 Message: The d_move patch was replaced by inode_rename patch on host side, see SVN revision r1148 + r1149. ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2008-11-12 19:59 Message: Your patch was committed to SVN as revision r1133. Thanks! ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-11-12 16:28 Message: chenm001 (chenm003 AT 163 DOT com) if this patch has any bug, please tell me, I will tract again. ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2008-11-12 01:26 Message: Yes, that solved this bug. NFS does it too. So it it very good. Thanks. What name I can honor in SVN? :-) Henry ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-11-11 10:19 Message: Here is my patch, I do not known it is good way, but it work fine in my computer. static int fuse_rename(struct inode *olddir, struct dentry *oldent, struct inode *newdir, struct dentry *newent) { struct fuse_conn *fc = INO_FC(olddir); struct fuse_in in = FUSE_IN_INIT; struct fuse_out out = FUSE_OUT_INIT; struct fuse_rename_in inarg; memset(&inarg, 0, sizeof(inarg)); inarg.newdir = newdir->i_ino; in.h.opcode = FUSE_RENAME; in.h.ino = olddir->i_ino; in.numargs = 3; in.args[0].size = sizeof(inarg); in.args[0].value = &inarg; in.args[1].size = oldent->d_name.len + 1; in.args[1].value = oldent->d_name.name; in.args[2].size = newent->d_name.len + 1; in.args[2].value = newent->d_name.name; request_send(fc, &in, &out); if (!out.h.error) { uncache_dir(olddir); +d_move(oldent, newent); if (olddir != newdir) uncache_dir(newdir); } return out.h.error; } ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2008-11-06 22:17 Message: Yes, SVN r1127 corrected only the swapped atime and mtime, and not the cache problem on rename. You have a patch? Nice. Please let's see. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-10-29 04:04 Message: Unfortunately, SVN revision r1127 do not fix this bug. When I remove my "d_move" patch, problem was recurrence. ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2008-10-28 00:24 Message: With these script the "touch -d 1970-1-1 b" after the "mv" fails all times: rm -f a b touch a mv a b touch -d 1970-1-1 b ls --full-time b Same problem with overwrite on move: touch a b mv a b touch -d 1970-1-1 b ls --full-time b On cofs the touch after "mv" fails: touch: setting times of `b': No such file or directory -rw-r--r-- 1 root root 0 2008-10-27 23:29:50.000000000 +0000 b On cobd or with 'nocache' it works: -rw-r--r-- 1 root root 0 1970-01-01 00:00:00.000000000 +0000 b ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-10-23 03:18 Message: Close inode cache possible loss performance, it is a little bug in rename only. I fix this bug yesterday. and I will use the my new kernel some days, if that has other problem, I can fix it. ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2008-10-22 13:41 Message: The inode cache is default enabled for 1 Second. You can disable it by adding "nocache" to mount options, for example: mount -o nocache -t cofs 0 /mnt/windows More cosf options, see cofs.txt in your coLinux installation or here: http://colinux.svn.sourceforge.net/viewvc/colinux/branches/devel/doc/cofs ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-10-21 13:48 Message: I trace the code, it see like rename bug, the filename change, but inode not. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2008-10-18 09:24 Message: Excuse me, I think this bug same as #2152550 ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2176188&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Bugs-2359423 ] cofs: "rm -r" fails ondirectories more as 200 files

SourceForge.net — 2008-11-29T17:54:46

Bugs item #2359423, was opened at 2008-11-29 18:54 Message generated for change (Tracker Item Submitted) made by Item Submitter You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2359423&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Henry N. (henryn) Assigned to: Nobody/Anonymous (nobody) Summary: cofs: "rm -r" fails on directories more as 200 files Initial Comment: If a directory has more as 200 entries the call "rm -r testdir" fails with: rm: cannot remove `testdir/file-000.tmp': No such file or directory rm: cannot remove `testdir/file-001.tmp': No such file or directory rm: cannot remove `testdir/file-002.tmp': No such file or directory ... rm: cannot remove `testdir/file-200.tmp': No such file or directory A "rm -rf testdir" on such directories goes in an endless loop with full cpu load. The rm command can simple break with "CTRL-C". A "cd testdir; rm *" works without problems. After the rm all files are removed. So, the rm is working, but not the "-r" option. All coLinux versions have this problem (tested 0.7.2, 0.7.3, 0.8.0). This problem I have only under Debian 4.0 Etch. On Debian 3.0 (Wooody), all works without problems. The script creates 201 files (from 000 to 200). If there are only 200 or less files in the directory, than it works. You can test it by change the 200 in the script to any lower value, for example 199, 100 or so. #!/bin/bash -e # create a list of files rm -rf testdir mkdir testdir cd testdir COUNT=0 while test $COUNT -le 200 do NAME=$COUNT test $NAME -le 99 && NAME=0$NAME test $NAME -le 9 && NAME=0$NAME echo "$NAME" touch file-$NAME.tmp COUNT=$(($COUNT+1)) done cd .. rm -r testdir ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2359423&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

autobuild org.colinux.devel 20081128 23:06:21

coLinux autobuild — 2008-11-29T05:07:05

The autobuild system has detected a new revision in the source repository. Review last changed from changelog.txt, also attached in mail. Download the compiled version: http://www.henrynestler.com/colinux/autobuild/devel-20081128/ colinux-0.8.0-20081128.src.tgz (693994 Bytes) daemons-0.8.0-20081128.dbg.zip (594944 Bytes) daemons-0.8.0-20081128.zip (480307 Bytes) Note, the autobuild compilation does not include an installer. Remember to reload the driver with these commands: colinux-daemon.exe --remove-driver colinux-daemon.exe --install-driver The vmlinux and modules are up to date. Please use last version from http://www.henrynestler.com/colinux/autobuild/devel-20081112/ The autobuild compilations are not official releases of Cooperative Linux software. There is no warranty that any autobuild version is stable. If use this autobuild version, please give us feedback of your experience. Job runs on machine with 64 bit version of gcc 4.1.2. A service from http://gcc.gnu.org/wiki/CompileFarm

[ colinux-Bugs-2357595 ] Some network card can'twork well with ndis-bridge

SourceForge.net — 2008-11-29T02:59:56

Bugs item #2357595, was opened at 2008-11-29 02:59 Message generated for change (Tracker Item Submitted) made by Item Submitter You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357595&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v0.8.x (devel) Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: Some network card can't work well with ndis-bridge Initial Comment: "Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller", this card is integrated with asus p5q-se motherboard(I have updated to the latest driver), ping between the host and the colinux will hang the host(but arping works well). I also tested another card "Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC", it is integrated with giga ep31 motherboard, but it did not have this problem. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357595&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Bugs-2357494 ] ndis-bridge can't workwell with pppoe

SourceForge.net — 2008-11-29T02:12:21

Bugs item #2357494, was opened at 2008-11-29 02:12 Message generated for change (Tracker Item Submitted) made by Item Submitter You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357494&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v0.8.x (devel) Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: ndis-bridge can't work well with pppoe Initial Comment: I tried to use pppoe in colinux, but pppoeconf can't find modem when using ndis-bridge, changing to pcap-bridge did not have this problem ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2357494&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

[ colinux-Feature Requests-2025225 ] Support forWindows x64

SourceForge.net — 2008-11-27T23:06:33

Feature Requests item #2025225, was opened at 2008-07-23 02:16 Message generated for change (Comment added) made by henryn You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622066&aid=2025225&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: Support for Windows x64 Initial Comment: All the machines in our office are running either Vista x64 or Server 2008 x64 and thus I can't use coLinux on my desktop despite really wanting to. Obviously there are driver signing issues to work through. Requiring the user to self-sign is not necessarily a blocker, at least for us. ---------------------------------------------------------------------- Date: 2008-11-28 00:06 Message: Have started a Dashboard for 64 bit in the Wiki: http://colinux.wikia.com/wiki/Dashboard_for_developing_a_64_bit_coLinux Developers wanted! ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622066&aid=2025225&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/

"Console and daemons" related issue ...

Shyokou Ouyou — 2008-11-26T07:37:31

------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/_______________________________________________ coLinux-devel mailing list coLinux-devel< at >lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/colinux-devel

[ colinux-Feature Requests-2114493 ] add iscsikernel support

SourceForge.net — 2008-11-26T00:34:18

Feature Requests item #2114493, was opened at 2008-09-16 18:34 Message generated for change (Comment added) made by henryn You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622066&aid=2114493&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Priority: 5 Private: No Submitted By: Ritesh Raj Sarraf (riteshsarraf) Assigned to: Nobody/Anonymous (nobody) Summary: add iscsi kernel support Initial Comment: Hi, I noticed that coLinux is modular but the features enabled is very minimal. I see room for many more features to be enabled, like iscsi et cetera. Is there a particular reason why these features are disabled? Or is it something a user can enable? Ritesh ---------------------------------------------------------------------- Date: 2008-11-26 01:34 Message: New modules are not in coLinux, because we have ported from one of very old config step by step between kernel versions without changing to many things. So, simply not all modules are enabled. Some modules does not working under coLinux. In this case iscsi seems me a module with software layer only (no hardware device) and should work without any problems. Please use the 20081123-Snapshot and update the modules from http://www.henrynestler.com/colinux/testing/devel-0.8.0/20081123-Snapshot/iscsi/ It would be nice if you can give a positive result. Henry ---------------------------------------------------------------------- Comment By: Ritesh Raj Sarraf (riteshsarraf) Date: 2008-11-25 13:17 Message: Hi, Can you please just comment if this is a valid request ? I just want to confirm if coLinux by default should be providing the modules or is it that the user is expected to compile additional modules are required. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622066&aid=2114493&group_id=98788 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/