http://blog.gmane.org/gmane.editors.websphere.iseries hourly 1 1901-01-01T00:00+00:00 http://gmane.org/img/gmane-25t.png http://gmane.org http://comments.gmane.org/gmane.editors.websphere.iseries/29926 <pre> I am using RDp 8.5.1. I have the Softlanding plugin for RSE installed and use it's functionality quite regularly. Today I attempted to compare ( and then apply ) a change I had made on my test box to the production box. I have a connection defined for each box. I right clicked on the member on the production box and selected RSE Extensions-&gt;Compare and selected the compare member on test box connection and library. Open for Edit was also selected. When I pressed OK the dialog box disappeared but nothing opened. I tried this a number of times, even changed to Open for Browse and still nothing opened. I did a -clean and nothing opened. I tried the reverse (opening the test member to compare to the production member) on the test connection's member. Nothing happened. I made a copy of the member in the test test library and this time it opened. So, does the compare not work against multiple connections? If it should work has anyone experienced this before? Where would I look to see what the problem is? Thanks, Robert Rogerson </pre> Robert Rogerson 2013-05-17T17:42:18 http://comments.gmane.org/gmane.editors.websphere.iseries/29917 <pre>I just loaded RDp 8.5 on a clean Win7 install using an existing workspace. Every time I start up, I have to cancel thru 8 "Secure Storage" password prompts. I don't want RDp to cache any passwords and I just want this to go away. Does anyone know how to kill it? Thanks </pre> Justin Taylor 2013-05-17T14:23:14 http://comments.gmane.org/gmane.editors.websphere.iseries/29914 <pre> _______________________________________________________________________________________ Note: This e-mail is subject to the disclaimer contained at the bottom of this message. _______________________________________________________________________________________ I wonder if anyone has encountered this problem. We have a machine with two iAsps on a single partition and the RDP users work from within either iASP 1 or iASP 2. When we stop and start the debug server (ENDDBGSVR/STRDBGSVR), Service Entry Points can only be set in RDP when the setting user has the same iASP group as the user who started the debug server. Users who try to set an SEP in an RPG program from the other iAsp get an error 'Server: CPF9810 Library ABC cannot be found', where ABC is the name of the library containing the rpg program. Is there a way we can set up the debug server so that is works simultaneously for both iASPS ? Thanks, Jeremy Jeremy Hogan Insure/90 Consultant Cudos Program Tel: 03 8630 1477 _______________________________________________________________________________________ The information transmitted in this message and its attachments (if any) is intended only for the person or entity to which it is addressed. The message may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information, by persons or entities other than the intended recipient is prohibited. If you have received this in error, please contact the sender and delete this e-mail and associated material from any computer. The intended recipient of this e-mail may only use, reproduce, disclose or distribute the information contained in this e-mail and any attached files, with the permission of the sender. This message has been scanned for viruses. _______________________________________________________________________________________ </pre> Jeremy Hogan 2013-05-17T06:44:17 http://comments.gmane.org/gmane.editors.websphere.iseries/29907 <pre>Perhaps I am trying too many new things at once. We have defined a new master file in DDL. I am writing a simple program to move the data from the old file to the new file. I got a compile error of invalid field name. I click on outline (and refreshed) to review field names and there is no plus sign for the DDL defined file. There is a plus sign for the DDS defined files and I can see the field names. But not for the DDL defined file. I have to use either ops nav or green screen tools to find the field names. Obviously I am missing something. Is there another way to view field names? I am also having trouble seeing what file definition is pulled into the program. It took me a while to get my library list correct for this new project . I got errors using files with the same name in the wrong library. How can I determine within RDI where the file definition is coming from? Currently, I still print the compiles so I view the spool file to see what library the file definitions are coming from. There has to be a way to do this in rdi. ---Dale </pre> dale janus 2013-05-16T15:32:11 http://comments.gmane.org/gmane.editors.websphere.iseries/29894 <pre>I am really trying to use RDI, but I need to continue to use some of my old methods. such as fixed format. I want to do a block copy, such as pasting rows of values into factor one. I have changed the lpex editor using windows, preferences, lpex, block. I have been able to select a block and cut it. What I cannot do is paste into a block copied from somewhere other than RDI. I have a bunch of statements: Eval newfield1 = oldfield1 eval newfield2 = oldfield2 and so on for 10 lines. I can cut a block of 10 oldfields just fine. Then I go to a green screen and copy 10 names in a column. When I paste them, the first oldfield is in the correct position, but the next one gets pasted in column 1 of the following line, which it creates. then a new line and the 3rd field is in position 1, and so on for 9 lines. So I get the first line pasted correctly, 9 extra lines inserted with a field name in columns 1 to 6(which overlays the C and gives form type error). If I paste into windows notepad, they paste into a column. What am I missing ? Do I have to create a rectangle to paste into? I have tried alt Z and I can get that to work if I copy the block of data from within RDI. The data I want is not always available within RDI when I switch between old and new methods. ---Dale </pre> dale janus 2013-05-15T15:56:51 http://comments.gmane.org/gmane.editors.websphere.iseries/29891 <pre>Attempting to start Debug from RDP 8.0.3 In LPEX editor I set breakpoints and select Debug As &gt; Interactive I get a dialog window: No interactive job associated with this connection. This raises error CPD0160 - Program QRSEMAIN not found in library QDEVTOOLS I see in Midrange archives that we need: 5722WDS (Option 50, Feature 5050) Is there anything else I should ask my operations manager to install ? </pre> Gary Thompson 2013-05-15T14:48:54 http://comments.gmane.org/gmane.editors.websphere.iseries/29887 <pre>This is not really a RDp / RDi / WDSc question. Nor is it a RPG400 listserv question. But I will post it here, since it may be indicative of how the SEU-driven QPDA library (Programmer Development Aids) is going to be treated by IBM in the future. And this could be another push within our shops for the Rational editors and utilities. When I run the CMPPFM command on our V7R1 machine, I am seeing in the report header a reference to V6R1, not the normal "V7R1" . . . In the report file QSYSPRT . . . output from the command and CPP pgm QPDA/ QUECPP1 " IBM COMPARE V6R1M0 080215 " is at the top of the report But running other reports from QPDA, they show V7R1 Example: WRKOBJPDM and F21 to print: In the printfile QPUOPRTF " 5770WDS V7R1M0 100416 CROWN3 Programming Development Manager - Object list " Seeing this raises doubts, and it seems to me to not be a proxy command problem . . . So were all QPDA objects refreshed by our operations-team during their upgrade to V7R1 . . . or is this just an instance of how disjointed pieces of PDA - now a frozen legacy product of IBM - will now appear . . . Can someone do me a favor and please run a CMPPFM on their V7R1 box and see if they get the same result ? - John Voris Crown Holdings </pre> Voris, John 2013-05-13T14:18:16 http://comments.gmane.org/gmane.editors.websphere.iseries/29873 <pre> _______________________________________________________________________________________ Note: This e-mail is subject to the disclaimer contained at the bottom of this message. _______________________________________________________________________________________ Is there a way to expand a lpex editor filter so that it displays X number of lines above and below the search results. What I'm after is instead off clicking on the + sign to display the lines below the result, is an option to display x lines above and below the search results. This will enable me to quickly determine how the search result is being used. Cheers --------------------------------------------- Peter Thomas INSURE/90 Consultant, BTS CGU Insurance T (03) 9601 8885 (xtn 38885) M 0412 812 615 E peter.thomas-gcbJelTQVZ8QrrorzV6ljw&lt; at &gt;public.gmane.org&lt;mailto:name.surname-gcbJelTQVZ8QrrorzV6ljw&lt; at &gt;public.gmane.org&gt; www.cgu.com.au&lt;http://www.cgu.com.au&gt; We put the You in CGU. Please consider the environment before printing this email. --------------------------------------------- _______________________________________________________________________________________ The information transmitted in this message and its attachments (if any) is intended only for the person or entity to which it is addressed. The message may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information, by persons or entities other than the intended recipient is prohibited. If you have received this in error, please contact the sender and delete this e-mail and associated material from any computer. The intended recipient of this e-mail may only use, reproduce, disclose or distribute the information contained in this e-mail and any attached files, with the permission of the sender. This message has been scanned for viruses. _______________________________________________________________________________________ </pre> Peter Thomas 2013-05-09T01:02:24 http://comments.gmane.org/gmane.editors.websphere.iseries/29872 <pre>Hello, I've submitted a RFE to add a preference to connections allowing them to 'Connect' at startup. Take a look and vote for it if you like it. :-D http://www.ibm.com/developerworks/rfe/execute?use_case=viewRfe&amp;CR_ID=34609 Thanks, Michael Quigley Computer Services The Way International www.TheWay.org 419 753-1222 </pre> MichaelQuigley-xh4QyN7hc9gdnm+yROfE0A< at >public.gmane.org 2013-05-08T23:50:27 http://comments.gmane.org/gmane.editors.websphere.iseries/29863 <pre>Monthly posting of the guidelines for participation in the Websphere Development Studio Client and Rational Developer for i mailing list. Keep to the subject. The topic of the list is IBM's Rational Developer for Power Systems, Rational Developer for i, and Websphere Development Studio Client. This includes all aspects of RDp / RDi / WDSCi. Including, but not limited to: RSE, LPEX, Compiling, Verification, and CODE/400. NOTE: EGL, Java, and Web development topics are better served in the lists specific to those topics. Limited discussion of third party plug-in's is also allowed. It is, however, recommend that questions about third party (non-IBM), non-open source, plug-in's be directed to the vendor's technical support group. Please be aware ... a number of IBM employees monitor this mailing list and will offer help when possible. Please keep in mind that the IBM'ers participate in this list on their spare time and so may not be able to respond promptly if at all. When starting a new discussion thread, *PLEASE* try to avoid replying to an existing message to get the correct email address. When you reply to an existing message, most email clients and the list archiving software think that the new thread is part of the old thread, and will display it as such. When quoting messages, do not quote the entire message. Just quote the parts that are needed to make the appropriate references. Flames are absolutely prohibited. If you disagree with someone, feel free to argue the facts, but no personal attacks will be tolerated. The official language of the Midrange Systems Mailing List is English. Do not post personal messages. Please use direct E-Mail. This list is international in scope and personal messages just end up costing money. While the participants of this list are happy to answer questions and help solve problems, it is greatly appreciated if you do some of your own research beforehand. Before posting a question for the first time, please take a moment to review Eric Raymonds excellent FAQ "How to Ask Questions the Smart Way" (http://www.catb.org/~esr/faqs/smart-questions.html). Advertising products, repeated postings, etc, are strictly prohibited. Also, if you have a solution that will specificly help another participant, feel free to tell that person. When you do, ensure that your post is relevant and timely. And finally, if you are a vendor, please identify yourself as such... do not try to pass yourself off as a user of your own products (even if you are). PLEASE NOTE: When posting to the list, any personally identifying information in your message will be included in the list. Email addresses, however, are masked when being formatted for the list archives. If you include a standard signature in all messages, consider using the internet standard for signature separator (as defined in RFC 3676, http://tools.ietf.org/html/rfc3676) of '-- ' (that's dash dash space). The list archiving software will automatically stop including the message when it encounters the marker. PLEASE do not report list messages to your mail providers abuse / spam department. This results in a black mark against midrange.com and, depending on the mail provider's policies, can cause mail delivery delays for everyone who uses both midrange.com with that mail provider. midrange.com does treat abuse reports very seriously and acts upon them immediately. When abuse reports are received, and the reporting person can be identified, they will be removed from all lists immediately ... and then a follow-up email will be sent. If you wish to be unsubscribed from a list and cannot do so through the normal mechanisms (identified at the bottom of every list message), please contact the list owner or support-Zwy7GipZuJhWk0Htik3J/w&lt; at &gt;public.gmane.org for assistance. By posting to this mailing list, you are granting MIDRANGE dot COM and David Gibbs (david-Zwy7GipZuJhWk0Htik3J/w&lt; at &gt;public.gmane.org) non-exclusive, unlimited, rights to republish the contents. This list IS copyrighted as a compilation. Republication of this mailing list, for anything other than personal use, without the explicit permission of the list owner is a violation of U.S. Copyright Law and will be dealt with as such. Collecting or "Mining" of email address from this forum, or any related web archive, is strictly and explicitly prohibited (not to mention that it is extraordinarily unprofessional). Violation of the above guidelines will be determined by the moderator and will result either a) The offending party will be forced to make major modifications to a 10 year old, matching records, RPG II program that uses every available indicator or b) permanent disconnection from the conference (you decide which is worse). To subscribe, unsubscribe, or change mailing list options, please vist http://lists.midrange.com/listinfo/wdsci-l If you have questions or comments about these guidelines, please feel free to contact the moderator, David Gibbs via internet e-mail at wdsci-l-owner-Zwy7GipZuJgU04JRNCRQjg&lt; at &gt;public.gmane.org MIDRANGE dot COM is a non-commercial organization and is not connected with any corporation, periodical, or commercial enterprise. For more information, send Internet E-Mail to support-Zwy7GipZuJgU04JRNCRQjg&lt; at &gt;public.gmane.org MIDRANGE dot COM and midrange.com, the owners and operators of this list, are in no way associated with International Business Machines (IBM), "Midrange Computing" magazine, or "Midrange Systems" magazine. The opinions expressed here are strictly those of their authors, and in no way reflect the opinions or statements of direction of the aforementioned companies. </pre> mailman-Zwy7GipZuJhWk0Htik3J/w< at >public.gmane.org 2013-05-01T11:30:55 http://comments.gmane.org/gmane.editors.websphere.iseries/29861 <pre>I work with a lot of source files that are stored in IFS. I access them by expanding the Root file system via Remote Systems. (I work remotely, connected via vpn). My problem is that RDP seems to continuously want to "refresh" my file list if I make any sort of change to a file or select a different file tab to look at. I don't even have to "save" anything. I can be locked out for 5 minutes while RDP shows "expanding filter" and windows shows it as "not "responding". It eventually does respond. Anyone have any suggestions as to a fix or workaround? (RDP 8.3 and 8.5) </pre> Tim Bronski 2013-05-01T10:13:50 http://comments.gmane.org/gmane.editors.websphere.iseries/29850 <pre>I've been experiencing problems while editing DDS in RDP 8.5.1. I've set the LPEX editor as the default. Seems that every couple of characters I type causes an hourglass for 30-60 seconds at a time. Very hard to get anything done that way. In all other aspects, RDP seems to behave normally. I notice this primarily when typing in the functions section of the DDS spec (column 45 and beyond). I thought perhaps it was updating the outline view or something. But the DDS parser doesn't seem to have the checkbox to disable the real-time updating that the RPG parser does. Any ideas? </pre> Elden Fenison 2013-04-29T18:46:30 http://comments.gmane.org/gmane.editors.websphere.iseries/29846 <pre> Hi Dan, You should be able to correct your order. The floating license is more expensive than an authorized user license. It makes sense in a large shop where you might have different people reusing the same license at different times. Just get a hold of your sales rep to correct the order. I believe the sales rep will do a credit and then place a new order for authorized user using the correct part number (D0C5FLL ). The order will then flow to the License key center where you can download the activation kit (license key). Regards, Edmund (E.H.) Reinhardt COBOL IDE on AIX, DDS, WebFacing, System i Application Development, Rational Developer for Power 2D barcode Phone: 1-905-413-3125 | Phone: 1-905-854-6195 IBM - encoded E-mail: edmund.reinhardt-G1DYhSM1WHTQT0dZR+AlfA&lt; at &gt;public.gmane.org with AIX COBOL: 8200 Warden Ave contact www.youtube.com/user/IBMRational#g/c/62DF24D5BCD43501 Markham, ON L6G 1C7 information "In every thing give thanks: for this is the will of Canada God in Christ Jesus concerning you." - 1 Thessalonians 5:18 ----- Forwarded by Edmund Reinhardt/Toronto/IBM on 29/04/2013 10:02 AM ----- From:Jenny Wong/Toronto/IBM To:Edmund Reinhardt/Toronto/IBM, Date:29/04/2013 09:18 AM Subject:Re: Fw: [WDSCI-L] License keys The customer will need to contact their sales rep to help them to correct the order. I believe the sales rep will do a credit and then place a new order for authorized user using the correct part number (D0C5FLL ). The order will then flow to the License key center where the customer can download the activation kit. Regards, Jenny. IBM Toronto Lab Rational Power Systems Software Planning Internet: jswong-G1DYhSM1WHTQT0dZR+AlfA&lt; at &gt;public.gmane.org Phone: (905)413-4127 Tie-line: 313-4127 Edmund Reinhardt/Toronto /IBM To Jenny Wong/Toronto/IBM&lt; at &gt;IBMCA, 04/26/2013 07:25 cc PM Subject Fw: [WDSCI-L] License keys Hi Jenny Is there a way to help this situation? Regards, Edmund (E.H.) Reinhardt COBOL IDE on AIX, DDS, WebFacing, System i Application Development, Rational Developer for Power 2D barcode Phone: 1-905-413-3125 | Phone: 1-905-854-6195 IBM - encoded E-mail: edmund.reinhardt-G1DYhSM1WHTQT0dZR+AlfA&lt; at &gt;public.gmane.org with AIX COBOL: 8200 Warden Ave contact www.youtube.com/user/IBMRational#g/c/62DF24D5BCD43501 Markham, ON L6G 1C7 information "In every thing give thanks: for this is the will of Canada God in Christ Jesus concerning you." - 1 Thessalonians 5:18 ----- Forwarded by Edmund Reinhardt/Toronto/IBM on 26/04/2013 07:25 PM ----- From:Dan Pankowski &lt;dpankowski-1m52vHjrvrfVPONTZIHbeQ&lt; at &gt;public.gmane.org&gt; To:"WDSCI-L-Zwy7GipZuJhWk0Htik3J/w&lt; at &gt;public.gmane.org" &lt;WDSCI-L-Zwy7GipZuJhWk0Htik3J/w&lt; at &gt;public.gmane.org&gt;, Date:26/04/2013 06:45 PM Subject:[WDSCI-L] License keys Sent by:wdsci-l-bounces-Zwy7GipZuJhWk0Htik3J/w&lt; at &gt;public.gmane.org Hi, After using wdsc for a few years, I decided to upgrade to rdp. I bought a single user license on passport advantage. Then I went to get the key on rational license key center, it says I bought a floating lic instead. It asks for license server info. I really don't want to install the server. Do I have to get IBM to change the lic changed or can I just install the floating lic. thanks Dan Pankowski Information Technology Dept. Sinclair Services Company Ph: 801-524-2956 www.sinclairoil.com&lt;http://www.sinclairoil.com&gt; -- This is the Rational Developer for IBM i / Websphere Development Studio Client for System i &amp; iSeries (WDSCI-L) mailing list To post a message email: WDSCI-L-Zwy7GipZuJhWk0Htik3J/w&lt; at &gt;public.gmane.org To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/wdsci-l or email: WDSCI-L-request-Zwy7GipZuJhWk0Htik3J/w&lt; at &gt;public.gmane.org Before posting, please take a moment to review the archives at http://archive.midrange.com/wdsci-l. </pre> Edmund Reinhardt 2013-04-29T14:11:49 http://comments.gmane.org/gmane.editors.websphere.iseries/29837 <pre>Hi, After using wdsc for a few years, I decided to upgrade to rdp. I bought a single user license on passport advantage. Then I went to get the key on rational license key center, it says I bought a floating lic instead. It asks for license server info. I really don't want to install the server. Do I have to get IBM to change the lic changed or can I just install the floating lic. thanks Dan Pankowski Information Technology Dept. Sinclair Services Company Ph: 801-524-2956 www.sinclairoil.com&lt;http://www.sinclairoil.com&gt; </pre> Dan Pankowski 2013-04-26T22:27:07 http://comments.gmane.org/gmane.editors.websphere.iseries/29836 <pre>I've been using RDp 8.5 on my old XP machine since shortly after it was released. The RSE Extension from SoftLanding went on without a hitch, and all was well. I now have a new Win7 PC, and I just can't get the RSE Extension to work. I loaded RDp on the new machine, restored my workspace and went about installing all my add-ins. I ran the RSE exe (rse_extensions_75.exe) and it completed with only a single anomaly. The screen where you're supposed to pick your RDp installation(s) had only a single checkbox with no text. I'm sure there are other people using this on Win7, I'm just not sure where my install went wrong. Any ideas? </pre> Justin Taylor 2013-04-26T21:27:54 http://comments.gmane.org/gmane.editors.websphere.iseries/29834 <pre> Hi, Sorry, this is a long one, but it shows an error in RDP v8.5.1 that might affect several of you. The same error may be in earlier versions as well, but I haven't got any earlier versions to test with. I have two IBM i connections setup in RSE connecting to the same server. The idea is that they have different library lists so that I can open a source member with one connection and it will compile with that connection's library list and into the correct object library (PGMLIB - not the same as SRCLIB in this 'shop). Each connection has a different PGMLIB set in the properties. Yesterday I was helping a colleague with a change I'd made ages ago and I opened a source member (using CTRL-ALT-A) using the "dev" connection, but when I compiled it I discovered that it used the "test" connection's PGMLIB (so I basically overwrote the test program). Normally this works fine, but this is probably the first time that I have opened the same source member from two different connections at the same time. Before you ask, I closed all source members, opened the source member from the "dev" connection only and it still compiled into the PGMLIB for the "test" connection. Also, the erroneous PGMLIB used in the compile was *not* the default PGMLIB set in the windows|preferences screen (remote systems|IBM i|command execution). When I shut RDP (v8.5.1) down and restarted it, the correct PGMLIB was used in all further compiles until I opened two versions of the same source in two different connections again. I can reproduce this problem every time. (assuming your compile commands use the PGM(&amp;O/&amp;N) SRCFILE(&amp;L/&amp;F) SRCMBR(&amp;N) compile options and you have a different object library set in each connection.) 0) Start RDP. 1) Open a development source member using one connection (i.e. "dev") 2) Open the test version of the same source member using the other connection 3) "Accidentally" compile (w/ prompt) the test source and cancel the compile. (You'll see the "test" PGMLIB listed in the prompt). 4) Try to compile (w/ prompt) the development source and you'll see the PGMLIB is set to the "test" connection's PGMLIB. At a guess I would say that once a compile is attempted, the PGMLIB for all further compiles will never change whether it is the correct one or not. The compile *with* prompt is not necessary, but just highlights the issue while enabling you to cancel the compile. I did it with the compile without prompt, and it took me a good few minutes to realise I had compiled over the test version and caused the testers to suddenly get lots of level checks. If you go through with the compile, the correct library list is used but the PGMLIB is wrong. If you haven't prompted the compile you have no idea what has happened until someone screams at you. -Paul. P.S. I've created a PMR for this. The "description" field on the PMR is really annoying! It completely ignores all CR/LF or &lt;BR /&gt; and makes the text really hard to read... oh well, I hope I entered it correctly anyway. Important, this email transmission and any files with it are strictly confidential to the intended recipient and may be legally privileged. Any views or opinions presented are solely those of the author and do not necessarily represent those of BHSF. If you are not the intended recipient, you must not copy, disclose or distribute its contents in any way. If you have received this e-mail in error, please notify the sender and delete the e-mail from your system. We have taken steps to ensure this email and attachments are free from any virus but do not accept any responsibility once this e-mail has been transmitted. You should scan any attachments for viruses. No contract may be concluded on behalf of BHSF Limited by e-mail. Registered Office: BHSF Limited, Gamgee House, 2 Darnley Road, Birmingham, B16 8TE. www.bhsf.co.uk Registered in England number 35500. BHSF is authorised and regulated by the Financial Services Authority. </pre> Paul Bailey 2013-04-25T09:27:05 http://comments.gmane.org/gmane.editors.websphere.iseries/29823 <pre>Hi, If you use Eclipse for Java, and double-click a variable, all occurrences of that variable are highlighted. As do many other IDE, like Visual Studio. And also my favorite text editor: Notepad++. &lt;Joy Joy&gt; I wonder why LPEX cannot duplicate this behavior. After all of the source is downloaded to the local PC anyway. Just thought I would ask... This is definitely not a "MUST HAVE", just one of those things that would "nice"... &lt;grin&gt; Just wondering... No Biggie! -Ken Killian- </pre> Ken Killian 2013-04-24T15:31:38 http://comments.gmane.org/gmane.editors.websphere.iseries/29810 <pre>New name: Now Rational Developer for i. New packaging includes chargeable components for modernisation: RPG and COBOL + Modernization Tools, Java Edition (was Rational Developer for i for SOA Construction) RPG and COBOL + Modernization Tools, EGL Edition (was Rational Developer for Power Systems Software Power Tools for i) One for one licence transfer/migration. Planned availability: Passport Advantage® June 14, 2013: Electronic availability July 5, 2013: Physical availability Advanced Administration System (AAS) June 28, 2013 http://www-01.ibm.com/common/ssi/ShowDoc.wss?docURL=/common/ssi/rep_ca/2/897/ENUS213-132/index.html&amp;lang=en&amp;request_locale=en --buck </pre> Buck Calabro 2013-04-23T20:33:15 http://comments.gmane.org/gmane.editors.websphere.iseries/29809 <pre>I reinstalled 8.5 and for some reason I clicked something and when I start the IDE it says that I have no local help. I've tried a few times to go to local help updater and choose Rational 8.5 and let it download, but it usually fails. Is there a way to install help from my installation ISO? Thanks, Jack </pre> Jack Tucky 2013-04-23T00:26:36 http://comments.gmane.org/gmane.editors.websphere.iseries/29801 <pre>Hoping this helps the RDP team improve their great product, I have a 5250 screen program that sometimes causes RDP to close abruptly. Some time past I worked with the team on a similar problem and they wanted me to try to identify some detail about the program code that might contribute to the abrupt close problem, but I was no help then. This program and display file combination are maybe a better candidate because Source Verify consistently reports RNF7701 for two data structures that are used to update a subfile: D s1DS DS Likerec(S1FMT:*ALL) D s1DS# DS Likerec(S1FMT:*ALL) C Update S1FMT s1DS# C S1&lt; at &gt; CHAIN S1FMT s1DS This program compiles without error and the update and chain operations work as intended, so I think this must be a problem in LPEX Editor </pre> Gary Thompson 2013-04-19T17:54:24 http://comments.gmane.org/gmane.editors.websphere.iseries/29795 <pre>I've been using WDSC for a number of years at V5R3 and it's superb. Really useful is the debugging capabilities, which makes testing code so much easier. We've now moved to V7R1 but I'm told there's no budget to upgrade WDSC. And anyway it works on V7R1, which it does quite happily. But to my dismay I can't get the debugger working. I start the debug service on the system 'I' but when I take the option to debug, nothing happens. Nothing appears in the “service entry points" tag. Does anyone know of debug works for WDSC on V7R1? </pre> Peter De Campi 2013-04-17T13:24:34 Search the mailing list at Gmane query http://search.gmane.org/?group=$group=gmane.editors.websphere.iseries