gmane.comp.web.zope.plone.bibliography

[BibTeX] Separator inside < at >keywords

Andreas Jung — 2011-10-21T06:56:49

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi there,

CMFBibAT seems to export/import keywords to/from BibTeX
files with ',' as seperator between multiple keywords.
Is this the correct behavior or are keywords in BibTeX separated
using a ','? What is the "official" standard here - I am reading
finding different examples on the internet.

Andreas

- -- 
ZOPYX Limited           | zopyx group
Charlottenstr. 37/1     | The full-service network for Zope & Plone
D-72070 Tübingen        | Produce & Publish
www.zopyx.com           | www.produce-and-publish.com
- ------------------------------------------------------------------------
E-Publishing, Python, Zope & Plone development, Consulting


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
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=dUcy
-----END PGP SIGNATURE-----
_______________________________________________
plone-biblio mailing list
plone-biblio-QcRmU36LScxyC2I0vPwN6RvVK+yQ3ZXh< at >public.gmane.org
https://mail.das-netzwerkteam.de/mailman/listinfo/plone-biblio

Fwd: Difficulty with Plone 4 and CMFBib 1.1.1.1

Raphael Ritz — 2011-06-21T04:42:16

Hi,

yesterday, we received this through plone.org.

I thought this was fixed? Anyone cares to respond
to insular?

Thanks,

     Raphael

-------- Original Message --------
Subject: Difficulty with Plone 4 and CMFBib 1.1.1.1
Date: Mon, 20 Jun 2011 23:40:32 +0000
From: discard-L3KAqWRvItOmomBsMVY0kR2eb7JE58TQ< at >public.gmane.org
To: raphael.ritz-9CsCpNDeVy4< at >public.gmane.org



Hi Raphael,

I am trying to setup a fresh installed plone 4 with Bibliography and Directory support. I am planning to install CMFBib first and then FacultyStuffDirectory and then fsd.cmfbib to glue the two together. I am not sure whether all these three are actively maintained and compatible with Plone 4.

But anyway, I started with CMBbib and added Products.CMFBibliographyAT into buildout.cfg and buildout and start plone and enabled the add-on. However as I clicked on the "http://localhost:8080/plone_test/bibliography_view" link I got following error:

Traceback (innermost last):
   Module ZPublisher.Publish, line 127, in publish
   Module ZPublisher.mapply, line 77, in mapply
   Module ZPublisher.Publish, line 47, in call_object
   Module Shared.DC.Scripts.Bindings, line 324, in __call__
   Module Shared.DC.Scripts.Bindings, line 361, in _bindAndExec
   Module Products.CMFCore.FSPageTemplate, line 240, in _exec
   Module Products.CMFCore.FSPageTemplate, line 180, in pt_render
   Module Products.PageTemplates.PageTemplate, line 80, in pt_render
   Module zope.pagetemplate.pagetemplate, line 113, in pt_render
    - Warning: Macro expansion failed
    - Warning:&lt;type 'exceptions.KeyError'&gt;: 'document_actions'
   Module zope.tal.talinterpreter, line 271, in __call__
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 888, in do_useMacro
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 533, in do_optTag_tal
   Module zope.tal.talinterpreter, line 518, in do_optTag
   Module zope.tal.talinterpreter, line 513, in no_tag
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 954, in do_defineSlot
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 533, in do_optTag_tal
   Module zope.tal.talinterpreter, line 518, in do_optTag
   Module zope.tal.talinterpreter, line 513, in no_tag
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 858, in do_defineMacro
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 954, in do_defineSlot
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 533, in do_optTag_tal
   Module zope.tal.talinterpreter, line 518, in do_optTag
   Module zope.tal.talinterpreter, line 513, in no_tag
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 946, in do_defineSlot
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 858, in do_defineMacro
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 533, in do_optTag_tal
   Module zope.tal.talinterpreter, line 518, in do_optTag
   Module zope.tal.talinterpreter, line 513, in no_tag
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 954, in do_defineSlot
   Module zope.tal.talinterpreter, line 343, in interpret
   Module zope.tal.talinterpreter, line 867, in do_useMacro
   Module zope.tales.tales, line 696, in evaluate
    - URL: file:/Users/charlie/work/plone4/buildout-cache/eggs/Products.CMFBibliographyAT-1.1.1.1-py2.6.egg/Products/CMFBibliographyAT/skins/bibliography/bibliography_view.pt
    - Line 118, Column 4
    - Expression:&lt;PathExpr standard:u'here/document_actions/macros/document_actions'&gt;
    - Names:
       {'container':&lt;PloneSite at /plone_test&gt;,
        'context':&lt;PloneSite at /plone_test&gt;,
        'default':&lt;object object at 0x3206e0&gt;,
        'here':&lt;PloneSite at /plone_test&gt;,
        'loop': {},
        'nothing': None,
        'options': {'args': ()},
        'repeat':&lt;Products.PageTemplates.Expressions.SafeMapping object at 0x621fa50&gt;,
        'request':&lt;HTTPRequest, URL=http://localhost:8080/plone_test/bibliography_view&gt;,
        'root':&lt;Application at&gt;,
        'template':&lt;FSPageTemplate at /plone_test/bibliography_view&gt;,
        'traverse_subpath': [],
        'user':&lt;PropertiedUser 'admin'&gt;}
   Module zope.tales.expressions, line 217, in __call__
   Module Products.PageTemplates.Expressions, line 149, in _eval
   Module zope.tales.expressions, line 124, in _eval
   Module Products.PageTemplates.Expressions, line 76, in boboAwareZopeTraverse
   Module OFS.Traversable, line 310, in restrictedTraverse
   Module OFS.Traversable, line 293, in unrestrictedTraverse
    - __traceback_info__: ([], 'document_actions')
KeyError: 'document_actions'

Wonder if you can help out. Thank you very much!

Charlie

--
plone.org Administrator


You are receiving this mail because Li Charles Xia (insular), charlie.xia.fdu-Re5JQEeQqe8AvxtiuMwx3w< at >public.gmane.org is sending feedback about content you created at http://plone.org/products/cmfbibliographyat.

Can't delete category from 'Flexible View Settings'

Alexander Maslov — 2011-05-03T09:02:10

Hi.

$subj

Plone 4.0.3 
CMFBibliographyAT 1.1.1.1
BibfolderFlexibleView 0.4.2

Trying to delete Category in the 'Flexible View Setting'.

Select any of the categories and press 'Delete selected categories' button ant you'll get

****************
2011-05-03 11:44:15 ERROR Zope.SiteErrorLog 1304412255.810.911266405445 http://localhost:8080/nmi/publications/bibfolder_flex_view_settings_form
Traceback (innermost last):
  Module ZPublisher.Publish, line 127, in publish
  Module ZPublisher.mapply, line 77, in mapply
  Module ZPublisher.Publish, line 47, in call_object
  Module Products.CMFFormController.FSControllerPageTemplate, line 91, in __call__
  Module Products.CMFFormController.BaseControllerPageTemplate, line 28, in _call
  Module Products.CMFFormController.ControllerBase, line 231, in getNext
  Module Products.CMFFormController.Actions.TraverseTo, line 38, in __call__
  Module ZPublisher.mapply, line 77, in mapply
  Module ZPublisher.Publish, line 47, in call_object
  Module Products.CMFFormController.FSControllerPythonScript, line 105, in __call__
  Module Products.CMFFormController.Script, line 145, in __call__
  Module Products.CMFCore.FSPythonScript, line 130, in __call__
  Module Shared.DC.Scripts.Bindings, line 324, in __call__
  Module Shared.DC.Scripts.Bindings, line 361, in _bindAndExec
  Module Products.PythonScripts.PythonScript, line 344, in _exec
  Module script, line 3, in bibfolder_flex_view_settings_delcategory
   - <FSControllerPythonScript at /nmi/bibfolder_flex_view_settings_delcategory used for /nmi/publications>
   - Line 3
  Module Products.BibfolderFlexibleView.tool.flexview_tool, line 604, in delete_category
ValueError: you've got to keep at least one category

****************

-alex

PDF file ID is not updated when 'Replace with a newfile' used

Alexander Maslov — 2011-05-02T12:19:48

When I first time upload 'Printable PDF File' for the reference item, 'PDF file' entry created in PDFs folder. 
URL for the uploaded PDF will be something like ..../pdfs/file_name.pdf

If I edit Reference Entry and use 'Replace with a new file' to upload new PDF, the content of the associated PDF file updated, but not the URL.
So even if I use file_name_2_.pdf the access URL still will be /pdfs/file_name.pdf

-alex

Fwd: bibliography_import disappear from trunk with respect to tag 1.1.1.1

Raphael Ritz — 2011-03-03T07:21:56

[Forwarding to list as I'm currently not into CMFBib dev]

Thanks for your feedback Andrea.
Much appreciated,

     Raphael

-------- Original Message --------
Subject: bibliography_import disappear from trunk with respect to tag 
1.1.1.1
Date: Wed, 02 Mar 2011 12:53:24 +0000
From: discard-L3KAqWRvItOmomBsMVY0kR2eb7JE58TQ< at >public.gmane.org
To: raphael.ritz-9CsCpNDeVy4< at >public.gmane.org



Hi Raphael,
I was trying to prepare a patch for your product that permit to use it with plone4.
I was working on a previous trunk release (but still 1.1.2)
I found  that it necessary to replace:

--- trunk/Products/CMFBibliographyAT/skins/bibliography/bibliography_view.pt    2010-08-23 07:53:32.299825000 +0200
+++ plone4/Products/CMFBibliographyAT/skins/bibliography/bibliography_view.pt   2011-01-19 16:42:14.525309000 +0100
< at >< at > -115,9 +115,9 < at >< at >
          There are no bibliographic entries on this site.
      &lt;/p&gt;

-&lt;div metal:use-macro="here/document_actions/macros/document_actions"&gt;
-        Document actions (print, sendto etc)
-&lt;/div&gt;
+&lt;tal:actions condition="nocall:context/document_actions|nothing"&gt;
+&lt;div metal:use-macro="context/document_actions/macros/document_actions"&gt;&lt;/div&gt;
+&lt;/tal:actions&gt;

I think by this patch the code will work well either with plone3 and with plone4.
By the way, during the patch generation i saw that some files disappear.
Only in plone4//Products/CMFBibliographyAT/skins/bibliography: bibliography_import.cpy
Only in plone4//Products/CMFBibliographyAT/skins/bibliography: bibliography_import.cpy.metadata
Only in plone4//Products/CMFBibliographyAT/skins/bibliography: bibliography_importForm.cpt
Only in plone4//Products/CMFBibliographyAT/skins/bibliography: bibliography_importForm.cpt.metadata

This is due to the fact that you really want to remove the import, or this is a mistake
or you are working to some code that will replace the import and actually it isn't
ready ... so you decided either to not put this new import code or the legacy one
into the trunk... or whatever?

I've to tell you that i was trying to use the import and it really worked great for me.

Thanks in advance
Best Regards

Andrea Zauli




--
plone.org Administrator


You are receiving this mail because Andrea Zauli (andreazauli), andrea-wEU2nDwL2GfQT0dZR+AlfA< at >public.gmane.org is sending feedback about content you created at http://plone.org/products/cmfbibliographyat/issues.

bibliography list: pdf info

Minev Mihail — 2010-12-21T15:16:56

Hi,

I am using CMFBibliography 0.9.3.1 but my question applies also to the
recent version.

If a PDF is attached to a bibliography item, it's available under
"Printable file" (using zmi action). For a complete bibliography view
(list of all items) I would like to add this information either. Lets
say for every entry containing a PDF, an icon and a link is displayed.
It's more easy for the user not needed to select each entry to see if a
PDF is attached. I've tried using the plone catalog to add a key for it,
but it would not work. Can you give me some hint how to make this
possible?

Regards
Mihail Minev

bibliography list: pdf info

Minev Mihail — 2010-12-21T11:13:57

Hi,

I am using CMFBibliography 0.9.3.1 but my question applies also to the
recent version.

If a PDF is attached to a bibliography item, it's available under
"Printable file" (using zmi action). For a complete bibliography view
(list of all items) I would like to add this information either. Lets
say for every entry containing a PDF, an icon and a link is displayed.
It's more easy for the user not needed to select each entry to see if a
PDF is attached. I've tried using the plone catalog to add a key for it,
but it would not work. Can you give me some hint how to make this
possible?

Regards
Mihail Minev

bibliography list view - enable pdf info

Minev Mihail — 2011-01-03T11:01:13

Hi,

I am using CMFBibliography 0.9.3.1 but my question applies also to the
recent version.

If a PDF is attached to a bibliography item, it's available under
"Printable file" (using zmi action). For a complete bibliography view
(list of all items) I would like to add this information either. Let's
say for every entry containing a PDF, an icon and a link is displayed.
It's easier for the user to not select each entry to see if a PDF is
attached. I've tried using the plone catalog to add a key for it, but it
would not work. Can you give me some hint how to make this possible?

Regards
Mihail Minev

bibutils for import

Ralf Hemmecke — 2010-10-26T00:05:51

Hi,

where is CMFBib 1.1.1.1 looking for bib2xml?

it is under /usr/bin and also under the bin directory of my instance. No 
chance, I get

#bin/instance fg
2010-10-26 01:24:43 INFO ZServer HTTP server started at Tue Oct 26 
01:24:43 2010
         Hostname: 0.0.0.0
         Port: 8080
2010-10-26 01:24:43 INFO Zope Set effective user to "plone"
2010-10-26 01:24:45 WARNING CMFBibliographyAT ExternalStorage N/A, 
falling back to AnnotationStorage
2010-10-26 01:24:46 WARNING Products.CMFBibliographyAT Unable to 
determine Bibtutils version
2010-10-26 01:24:49 WARNING bibliograph.core Command bib2xml not found 
in search path!

Where do I have to put the files?

Furthermore when I import this

< at >TechReport{Bachmann+Graebe:Symbolicdata:2000,
   author = {Olaf Bachmann and Hans-Gert Gr{\"a}be},
   title = {The {S}ymbolic{D}ata Project},
   type = {Reports On Computer Algebra},
   year = 2000,
   number = {27 (2000)},
   institution = {Center for Computer Algebra, University of
                   Kaiserslautern},
}

I get the trace...

2010-10-26 01:59:09 ERROR Zope.SiteErrorLog 1288051149.940.55847793495 
https://test.dkcm.jku.at/dk/Members/hemmecke/mybib/mybib/bibliography_importForm
Traceback (innermost last):
   Module ZPublisher.Publish, line 127, in publish
   Module ZPublisher.mapply, line 77, in mapply
   Module ZPublisher.Publish, line 47, in call_object
   Module Products.CMFFormController.FSControllerPageTemplate, line 91, 
in __call__
   Module Products.CMFFormController.BaseControllerPageTemplate, line 
28, in _call
   Module Products.CMFFormController.ControllerBase, line 231, in getNext
   Module Products.CMFFormController.Actions.TraverseTo, line 38, in 
__call__
   Module ZPublisher.mapply, line 77, in mapply
   Module ZPublisher.Publish, line 47, in call_object
   Module Products.CMFFormController.FSControllerPythonScript, line 105, 
in __call__
   Module Products.CMFFormController.Script, line 145, in __call__
   Module Products.CMFCore.FSPythonScript, line 130, in __call__
   Module Shared.DC.Scripts.Bindings, line 324, in __call__
   Module Shared.DC.Scripts.Bindings, line 361, in _bindAndExec
   Module Products.PythonScripts.PythonScript, line 344, in _exec
   Module script, line 104, in bibliography_import
    - <FSControllerPythonScript at /dk/bibliography_import used for 
/dk/Members/hemmecke/mybib>
    - Line 104
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 33: 
ordinal not in range(128)

If I replace {\"a} by just a, the import goes through without any 
message. That's fine because it seems to show that the umlaut seems to 
reveal a bug. And it's bad, because, if I bibutils hasn't been found at 
startup, I shouldn't be offered to import bibtex or the import should 
shout instead of silently swallowing my input and producing nothing.

I cannot imagine that many people are using CMFBib, otherwise such 
problems would no longer be there. :-(

Ralf

bibexport bug

Ralf Hemmecke — 2010-10-25T23:48:34

I've just exported a techreport with CMFBib 1.1.1.1.

< at >Techreport{techreportreference.2010-10-26.7129410820,
   author = {Bachmann, Olaf and Gr{\"{a}}be, Hans-Gert},
   title = {The SymbolicData Project},
   year = {2000},
   institution = {Center for Computer Algebra, University of 
Kaiserslautern},
   publication\_type = {type},
   number = {27 (2000)}
}

"publication\_type" is clearly wrong as a bibentry field key.

In fact, while I have entered this TechReport, I've put

   Reports On Computer Algebra

into the "Type" field. But on export, it's seemingly gone. :-(

Ralf

Author--Member association

Martin Hagmueller — 2010-10-04T10:55:45

Hi,

We are currently considering using CMFbibliographyAT to manage the
Bibliography of our lab-website.
One feature that seems especially useful is the automatic reference of
authors to site members so we can link to the author homepage from the
publications.

Unfortunately, I have not managed to make this work. We get our member
data from an ldap server, which provides the attributes fullname,
firstnames and lastname.
The import report says: Inferred author references:  ... no
corresponding member found.
Of course, we could do this manually, but this would be a tedious task,
since we have 400+ Publications to import.

If I do the mapping by hand, another problem arises. Say, a publication
has multiple authors and the author belonging to the site is not the
first author. Then the link to the author homepage moves to the
preceeding author.

Has anyone made this work? Is there anything I have to know to make this
work?

Our System setup:

CMFBibliographyAT 1.1.1.1

    * Plone 3.3.5
    * CMF 2.1.2
    * Zope (unreleased version, python 2.4.6, linux2)
    * Python 2.4.6 (#1, Oct 4 2010, 11:15:47) [GCC 4.4.5 20100728
prerelease)]
    * PIL 1.1.6

I'd appreciate any help.

Best regards,
Martin

CMFBibAT 1.1 + Plone 4.0b5

Andreas Jung — 2010-07-24T14:26:01

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi there,

unfortunately Plone 4.0b5 has some incompatible changes that make it
impossible to run CMFBibAT 1.1.0 with Plone 4.0b5.

Those changes include:

- - removal of the IndexIterator support
- - obviously some template/CSS changes

Current problems that must be addressed:

- - overall removal of the tabindex/IndexIterator support in CMFBibAT and
  ATExtensions

- - adjustments of the preference templates to the new markup (tabs are
not rendered properly)

- - default view of the bibliography folder renders strange

Unfortunately the latest changes in Plone 4 make it impossible for
maintaining a common codebase for CMFBibAT both for Plone 3 and Plone 4.

So CMFBibAT 1.0.X will remain the version to be used for Plone 3.X and
CMFBibAT 1.1.X will feature support for Plone 4.X only - unfortunately.

Fixing those issues either requires a volunteer for dealing with the
Plone 4 specific issues or some further funding.

Andreas

- -- 
ZOPYX Limited           | zopyx group
Charlottenstr. 37/1     | The full-service network for Zope & Plone
D-72070 Tübingen        | Produce & Publish
www.zopyx.com           | www.produce-and-publish.com
- ------------------------------------------------------------------------
E-Publishing, Python, Zope & Plone development, Consulting


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkxK9/kACgkQCJIWIbr9KYyVWACaAjBrtYX9HzVTsHzZUriDfekZ
OmcAn1MdemVELbKizfJBeu3VIAqxiqes
=Im1o
-----END PGP SIGNATURE-----
_______________________________________________
plone-biblio mailing list
plone-biblio-QcRmU36LScxyC2I0vPwN6RvVK+yQ3ZXh< at >public.gmane.org
https://mail.das-netzwerkteam.de/mailman/listinfo/plone-biblio

Fwd: Re: Can you do this with CMFBibliographyAT?

Felix Droste — 2010-07-12T06:48:22

hi,


I don't know anything about Reflecto, but if these files are in the
catalog, the addon BibfolderFlexibleView
(http://plone.org/products/bibfolderflexibleview/)  makes it possible to
link them to bibliographic entries without much administrative overhead


This is possible in BibfolderFlexibleView. See
http://www.physik.hu-berlin.de/pmm/pub, where the pdf-links are inactive
(semi-transparent) for non-logged in users (they could also be totally
hidden, layout details can be configured rather freely)


again, possible with Bibliography Smart Folders (ATBiblioTopic -
thought they were part of the basic product but maybe they're actually
from some add-on), possibly in combination with BibFlexView. This is
also what we do at http://www.physik.hu-berlin.de/pmm/pub, where we have
one central bibfolder and sub-collections like
https://www.physik.hu-berlin.de/pmm/rabe/bibtopic or
https://www.physik.hu-berlin.de/pmm/forschung/elektron/bibtopic that
filter it.

Hope that helps,

Felix

Can you do this with CMFBibliographyAT?

Jason Moore — 2010-07-10T20:06:15

Hi,

I have been playing around with CMFBibliographyAT to see if it can do some
of the things that I need for reference management. I have a collaborative
database of pdfs and a master .bib file with several of my colleagues on my
server that is synced with each of our databases on our personal computers.
I allow access to this folder for registered users on Plone via Reflecto. We
use a different piece of software (Jabref <http://jabref.sourceforge.net/>)
on our personal computers to manage our bibliographic data which I prefer to
Plone, so I just want basic import and export to Plone so that people
outside my collaboration circle to see our reference list. I currently do
this with some clunky scripts, bibtex2html, and Reflecto. This is what it
looks like: http://biosport.ucdavis.edu/research-projects/bicycle/references


These are the users I have in mind:

(a) Anonymous web user: surfs to our site and clicks our reference lists.
They can get the full citation information and links to journals but have no
access to our pdfs or reviews.

(b) Colleagues who we like to share pdfs with: They surf to the site, log in
and check out the references lists. They see the same thing as the Anonymous
users except they now see reviews and can download the document(s)
associated with that bib item.

(c) Colleagues who work on our projects: Same as (b) but they also can open
up their bib management software on their personal computer and edit/add bib
entries, add pdfs and sync their changes with the file system on our central
repository on our server. These changes then need to be populated to the
Plone site.

Here are my questions about CMFBibliographyAT's potential capabilities:

1. Can an bibliographic item link to a pdf that is served through Reflecto?

2. Is it possible to have a "private" bib item which links to the pdf and
shows our reviews and also a "public" bib item for anonymous users that
don't have access to the pdfs or our reviews?

3. Is it possible to set up a single master folder with all bib items on the
server and then set up collections based on keywords/tags to have sub biblio
folders?

4. If I have a master bib file on my filesystem, can I somehow sync the
plone bib items to the entries in the bib file?

3. How do you move the "bibliography search" to a subfolder or change its
order on the menu bar? From the ZMI?

Thanks,

Jason

P.S. I've been checking out Mendeley <http://www.mendeley.com/> and it seems
pretty cool for universal collaboration. Anyone use that for reference
management?

CMFBibliographyAT 1.1.0 released

Andreas Jung — 2010-07-05T07:36:24

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I am please to announce the release of CMFBibliography 1.1.0.

http://pypi.python.org/pypi/Products.CMFBibliographyAT/1.1.0

This release is feature-identical with the CMFBibliographyAT 1.0
but supports both Plone 3 and Plone 4.

Thanks to the folks at Jarn for doing the majority of the Plone 4
port and cleanup. Thanks to the Humboldt University of Berlin for
supporting this release.

Andreas

- -- 
ZOPYX Limited           | zopyx group
Charlottenstr. 37/1     | The full-service network for Zope & Plone
D-72070 Tübingen        | Produce & Publish
www.zopyx.com           | www.produce-and-publish.com
- ------------------------------------------------------------------------
E-Publishing, Python, Zope & Plone development, Consulting


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkwxi3cACgkQCJIWIbr9KYzb1wCff2oZL7n2daC+04rGinPLjnpJ
MXAAnRAx1evpekiRVOM17yJcYXg5PWqo
=qJe7
-----END PGP SIGNATURE-----
_______________________________________________
plone-biblio mailing list
plone-biblio-QcRmU36LScxyC2I0vPwN6RvVK+yQ3ZXh< at >public.gmane.org
https://mail.das-netzwerkteam.de/mailman/listinfo/plone-biblio

CMFbibAT and ExternalStorage

Andreas Jung — 2010-05-21T05:56:41

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi there,

CMFBibAT supports storing PDFFiles on the filesystem using the optional
ExternalStorage extension. Since ExternalStorage is old and unmainainted
and the availability of blob support in Plone 4 I would consider kicking
ExternalStorage support at some point.

Questions:

 - actually anyone using ExternalStorage?
 - anyone having an idea how to migrate away from ExternalStorage?

Andreas


- -- 
ZOPYX Limited           | zopyx group
Charlottenstr. 37/1     | The full-service network for Zope & Plone
D-72070 Tübingen        | Produce & Publish
www.zopyx.com           | www.produce-and-publish.com
- ------------------------------------------------------------------------
E-Publishing, Python, Zope & Plone development, Consulting


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkv2IJkACgkQCJIWIbr9KYynMgCgoew9JnDEvW/hBIg4qGb2Id9f
3BkAnitNe4tHYWNEITRmIHdRL3nHyTUm
=g7QA
-----END PGP SIGNATURE-----
_______________________________________________
plone-biblio mailing list
plone-biblio-QcRmU36LScxyC2I0vPwN6RvVK+yQ3ZXh< at >public.gmane.org
https://mail.das-netzwerkteam.de/mailman/listinfo/plone-biblio

CMFBibliographyAT 1.1.0b1 release w/ Plone 4compatiblity

Andreas Jung — 2010-05-10T11:52:07

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi there,

I just released CMFBibAT 1.1.0b1:

http://pypi.python.org/pypi/Products.CMFBibliographyAT/1.1.0b1

This version provides the same functionality as V 1.0.X but it is now
compatible with both Plone 3 and Plone 4 on top of the same codebase.

Andreas

- -- 
ZOPYX Limited           | zopyx group
Charlottenstr. 37/1     | The full-service network for Zope & Plone
D-72070 Tübingen        | Produce & Publish
www.zopyx.com           | www.produce-and-publish.com
- ------------------------------------------------------------------------
E-Publishing, Python, Zope & Plone development, Consulting


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkvn82cACgkQCJIWIbr9KYzUFwCfXM7rvnDspOzfmIksoRkH2NaE
lV8AnjwfVGa5n/jHqD3LDYe2BOSBZgVe
=gOu/
-----END PGP SIGNATURE-----
_______________________________________________
plone-biblio mailing list
plone-biblio-QcRmU36LScxyC2I0vPwN6RvVK+yQ3ZXh< at >public.gmane.org
https://mail.das-netzwerkteam.de/mailman/listinfo/plone-biblio

[CMFBibAT] SVN changes/Plone 4 compatibility

Andreas Jung — 2010-05-03T09:50:56

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi there,

due to ongoing development I made the following SVN change for
Products.CMFBibliographyAT:

The current trunk moved to its own branch:

https://svn.plone.org/svn/collective/Products.CMFBibliographyAT/branches/1.0

The current buildout of the trunk moved to its own branch:

https://svn.plone.org/svn/collective/Products.CMFBibliographyAT/buildout/branches/1.0

The codebase on the 1.0 branch in now in maintenance mode and not open
for further development - but open for bug fixes.

The new trunk

https://svn.plone.org/svn/collective/Products.CMFBibliographyAT/trunk

and its buildout

https://svn.plone.org/svn/collective/Products.CMFBibliographyAT/buildout/trunk


are now open for new development.

As a first step I merged the 'martior-plone4' branch (by Jarn?).

By doing this CMFBibliographyAT/trunk is now compatible with Plone 4!

As far as I can see there are no big issues with the Plone 4
compatibility. There is only one issue with the idcookers/normalizers
due to some incompatible change/cleanup related to normalizeString() in
Plone 4. I will have to check if the trunk will also work with Plone 4.

If yes: the new CMFBibAT 1.1 will feature support for Plone 3/4 -
otherwise Plone 4 only - I would like to avoid having to maintain V 1.0
for Plone 3 and V 1.1 for Plone 4....hopefully 1.1 will work with Plone
3 and 4 all together.

Andreas




- -- 
ZOPYX Limited           | zopyx group
Charlottenstr. 37/1     | The full-service network for Zope & Plone
D-72070 Tübingen        | Produce & Publish
www.zopyx.com           | www.produce-and-publish.com
- ------------------------------------------------------------------------
E-Publishing, Python, Zope & Plone development, Consulting


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkvenH8ACgkQCJIWIbr9KYyc6ACgzsolD6/4v/sOJLAvVnij9PDg
7hEAn2/LQz6bZ9RSSbVxK9uudCo74fbI
=PTfD
-----END PGP SIGNATURE-----
_______________________________________________
plone-biblio mailing list
plone-biblio-QcRmU36LScxyC2I0vPwN6RvVK+yQ3ZXh< at >public.gmane.org
https://mail.das-netzwerkteam.de/mailman/listinfo/plone-biblio

question about authors field

Anne Bowtell — 2010-04-30T11:30:19

Hi all

I'm feeling a bit dim! I'd like to get a list of author dicts from the 
authors field. Something like:

[{firstname:John, lastname:Smith},
  {firstname:Alice, lastname:Brown}]

I've tried the getAuthors() and getAuthorsList() methods, but both seem 
to return a nicely formatted string, rather than the raw values.  
Although looking through other code there's a suggestion that 
getAuthors() *ought* to do what I want.

I'm using CMFBibAT 1.0 and ATExtensions 0.9.6. The CMFBibAT version, 
unfortunately, is the unreleased version prior to that released after 
Andreas had worked his magic.  The reason I want to do this is to export 
and import via quintagroup.transmogrifier - I can get export to work 
fine, but can't import, so I'm trying to use an adapter in the 
datacorrector pipeline to write the raw author values into the XML.

Thanks

Anne
_______________________________________________
plone-biblio mailing list
plone-biblio-QcRmU36LScxyC2I0vPwN6RvVK+yQ3ZXh< at >public.gmane.org
https://mail.das-netzwerkteam.de/mailman/listinfo/plone-biblio

note/annote field in ATBiblioStyles/CMFBibliographyAT

stefanx — 2010-04-26T10:03:49

Hello,

sorry for nerving, perhaps there is a easy way to
show the note and the annote field with ATBiblioStyles
or with CMFBibliographyAT itsself ?

Please could you tell me where where I can find the
relevant code ?

Sorry, I really don't understand why these products omit
these fields, is there a special reason ?

Stefan

problems exporting umlauts in note field

Stefan — 2010-04-24T22:34:53

Hello,

there seems to be a problem when exporting a
note field with german umlauts:

* Import:

< at >Book{aaa:bbb,
author="{\"U} {\"u}",
title="eee",
year="2000",
publisher="ffff",
note="{\"U} {\"u}"
}


* HTML-Output:

Ü ü  (2000)
eee
ffff.
Notiz
Ü ü


* Exported bibtex
("author" is exported correct, "note" only as reference):

< at >Book{aaa-bbc,
  author = {{\"{u}}, {\"{U}}},
  title = {eee},
  year = {2000},
  publisher = {ffff},
  note = {<BaseUnit at /Plone/aaa-bbb/note>}
}


Btw, how is it possible to show the note field in the list output
(please tell me where in the code) ?

Stefan