gmane.comp.hardware.gps.gpsbabel.general

Synchronise my Sony GPS-CS1 with gpsbabel,how?

Tim Elliott — 2012-05-21T11:59:36

I do not know what system my Sony GPS-CS1 uses, and Sony wasn't listed 
on gpsbabel.  The log titles from the Sony are WG20110110223241, etc.  I 
want to transfer my track logs into Photoshop Lightroom 4 Map module, 
how?. Tim Elliott
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

AutoRoute .AXE files

Reg — 2012-05-20T21:16:29

AutoRoute 2012 only has an export to.gpx files.

Unfortunately it does not include all the information panel data.
Only the name and lat/long get exported.

Are there any plans to include .axe file import to GPSBabel?

Reg

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

garmin 62s real time works on desktop but not onlaptop

Steve Jones — 2012-05-18T17:15:30

Connecting the 62s in spanner mode enables me to get real time position information on my desktop, but there is some issue with the notebook. Could it be related to underpowered usb ports? 


running the command

sudo gpsbabel -T -i garmin -f /dev/ttyUSB0 


I usually get the following error:

[ERROR] GPS_Packet_Read: Timeout. No data received.
Garmin: Can't init /dev/ttyUSB0

however, the garmin is recognized as being a usb device.
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

File Coversion Issue

Studer, Byron — 2012-05-18T15:06:07

What am I missing... trying to convert a csv (Northing/Easting/Elevation/Desc.) to GPX... file attached, graphic below...

Thanks in advance!

[cid:image001.png< at >01CD34D5.75E62D70]

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

Brauniger IQ One+

Corneanu Dan — 2012-05-14T12:27:06

Hello,
I have a Brauniger IQ One+ and I want to be able to download the barograph on my linux machine.
After a quick inspection of the gpsbabel source code I saw that the baroiq feature is somehow unfinished/not working.
Can anybody tell me what is the state of this feature?

I am prepared to contribute to the project if possible.

I was able to download both the flight memory and device configuration memory from my vario to the computer (using the java serial port API) and did some reverse engineering on it.
Any help regarding the format of the memory would be appreciated.

Best regards,
Dan.------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

GPX conversion problem

Pewe — 2012-05-12T01:21:27

I have a .csv file from a gps tracker which contains the following 
information

----------------------------------------------------------------------

Latitude,Longitude,DateOccurred,ID,IconName,Comments,TripName,ImageURL,Angle,CellID,SignalStrength,SignalStrengthMin,SignalStrengthMax,BatteryStatus,Source,Speed,Altitude 

51.1920337833333,-3.10182991666667,11/05/2012 
12:49:13,7,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,21.9
51.19201865,-3.10177455,11/05/2012 
12:49:23,8,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,25.6
51.1920189,-3.10177426666667,11/05/2012 
12:49:34,9,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,25.6
51.1920190666667,-3.10177455,11/05/2012 
12:49:44,10,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,25.6
51.1920197333333,-3.10177415,11/05/2012 
12:49:54,11,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,25.5
51.1920893666667,-3.1018046,11/05/2012 
12:50:01,12,,,Auto_2012.05.11_12.48.29_PM,,23.2,,,,,,0,0.6687777772,18.9
51.1920924833333,-3.10178888333333,11/05/2012 
12:50:04,13,,,Auto_2012.05.11_12.48.29_PM,,53.8,,,,,,0,0.7202222216,24.5
51.1921275166667,-3.10154325,11/05/2012 
12:50:15,14,,,Auto_2012.05.11_12.48.29_PM,,69.3,,,,,,0,1.3889999988,23.6
51.1921447833333,-3.10150086666667,11/05/2012 
12:50:25,15,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,23.3
51.1921165166667,-3.10151545,11/05/2012 
12:50:29,16,,,Auto_2012.05.11_12.48.29_PM,,210,,,,,,0,0.771666666,23.1

------------------------------------------------------------------------------- 


In GPSBabel I have the input set to 'Universal csv with field structure 
in first line' and output set to 'GPS XML'.

The resulting GPX file has the following content

------------------------------------------------------------------------------ 


<?xml version="1.0" encoding="UTF-8"?>
<gpx
   version="1.0"
   creator="GPSBabel - http://www.gpsbabel.org"
   xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   xmlns="http://www.topografix.com/GPX/1/0"
   xsi:schemaLocation="http://www.topografix.com/GPX/1/0 
http://www.topografix.com/GPX/1/0/gpx.xsd">
<time>2012-05-11T23:28:41Z</time>
<bounds minlat="51.192018650" minlon="-3.101829917" 
maxlat="51.192144783" maxlon="-3.101500867"/>
<trk>
<trkseg>
<trkpt lat="51.192033783" lon="-3.101829917">
<ele>21.900000</ele>
<time>2012-11-05T00:00:00Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192018650" lon="-3.101774550">
<ele>25.600000</ele>
<time>2012-11-05T00:00:00Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192018900" lon="-3.101774267">
<ele>25.600000</ele>
<time>2012-11-05T00:00:00Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192019067" lon="-3.101774550">
<ele>25.600000</ele>
<time>2012-11-05T00:00:00Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192019733" lon="-3.101774150">
<ele>25.500000</ele>
<time>2012-11-05T00:00:00Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192089367" lon="-3.101804600">
<ele>18.900000</ele>
<time>2012-11-05T00:00:00Z</time>
<speed>0.668778</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192092483" lon="-3.101788883">
<ele>24.500000</ele>
<time>2012-11-05T00:00:00Z</time>
<speed>0.720222</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192127517" lon="-3.101543250">
<ele>23.600000</ele>
<time>2012-11-05T00:00:00Z</time>
<speed>1.389000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192144783" lon="-3.101500867">
<ele>23.300000</ele>
<time>2012-11-05T00:00:00Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192116517" lon="-3.101515450">
<ele>23.100000</ele>
<time>2012-11-05T00:00:00Z</time>
<speed>0.771667</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
</trkseg>
</trk>
</gpx>

--------------------------------------------------------------------------------------- 


As you can see, the '<time> is not correct for 2 reasons
- the month and day are reversed (11-05 instead of 05-11) and the time 
is blank.

So I modified the csv splitting out the 'date' and 'time' to read as 
follows

------------------------------------------------------------------------------------ 


Latitude,Longitude,Date,Time,ID,IconName,Comments,TripName,ImageURL,Angle,CellID,SignalStrength,SignalStrengthMin,SignalStrengthMax,BatteryStatus,Source,Speed,Altitude 

51.19203378,-3.101829917,11/05/2012,12:49:13,7,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,21.9 

51.19201865,-3.10177455,11/05/2012,12:49:23,8,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,25.6 

51.1920189,-3.101774267,11/05/2012,12:49:34,9,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,25.6 

51.19201907,-3.10177455,11/05/2012,12:49:44,10,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,25.6 

51.19201973,-3.10177415,11/05/2012,12:49:54,11,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,25.5 

51.19208937,-3.1018046,11/05/2012,12:50:01,12,,,Auto_2012.05.11_12.48.29_PM,,23.2,,,,,,0,0.668777777,18.9 

51.19209248,-3.101788883,11/05/2012,12:50:04,13,,,Auto_2012.05.11_12.48.29_PM,,53.8,,,,,,0,0.720222222,24.5 

51.19212752,-3.10154325,11/05/2012,12:50:15,14,,,Auto_2012.05.11_12.48.29_PM,,69.3,,,,,,0,1.388999999,23.6 

51.19214478,-3.101500867,11/05/2012,12:50:25,15,,,Auto_2012.05.11_12.48.29_PM,,,,,,,,0,0,23.3 

51.19211652,-3.10151545,11/05/2012,12:50:29,16,,,Auto_2012.05.11_12.48.29_PM,,210,,,,,,0,0.771666666,23.1 


--------------------------------------------------------------------------------- 


In the resulting GPX file the time was now correct, but the date was 
still wrong as seen here


------------------------------------------------------------------------------------------------ 


<?xml version="1.0" encoding="UTF-8"?>
<gpx
   version="1.0"
   creator="GPSBabel - http://www.gpsbabel.org"
   xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   xmlns="http://www.topografix.com/GPX/1/0"
   xsi:schemaLocation="http://www.topografix.com/GPX/1/0 
http://www.topografix.com/GPX/1/0/gpx.xsd">
<time>2012-05-12T00:27:42Z</time>
<bounds minlat="51.192018650" minlon="-3.101829917" 
maxlat="51.192144780" maxlon="-3.101500867"/>
<trk>
<trkseg>
<trkpt lat="51.192033780" lon="-3.101829917">
<ele>21.900000</ele>
<time>2012-11-05T12:49:13Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192018650" lon="-3.101774550">
<ele>25.600000</ele>
<time>2012-11-05T12:49:23Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192018900" lon="-3.101774267">
<ele>25.600000</ele>
<time>2012-11-05T12:49:34Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192019070" lon="-3.101774550">
<ele>25.600000</ele>
<time>2012-11-05T12:49:44Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192019730" lon="-3.101774150">
<ele>25.500000</ele>
<time>2012-11-05T12:49:54Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192089370" lon="-3.101804600">
<ele>18.900000</ele>
<time>2012-11-05T12:50:01Z</time>
<speed>0.668778</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192092480" lon="-3.101788883">
<ele>24.500000</ele>
<time>2012-11-05T12:50:04Z</time>
<speed>0.720222</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192127520" lon="-3.101543250">
<ele>23.600000</ele>
<time>2012-11-05T12:50:15Z</time>
<speed>1.389000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192144780" lon="-3.101500867">
<ele>23.300000</ele>
<time>2012-11-05T12:50:25Z</time>
<speed>0.000000</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
<trkpt lat="51.192116520" lon="-3.101515450">
<ele>23.100000</ele>
<time>2012-11-05T12:50:29Z</time>
<speed>0.771667</speed>
<name>Auto_2012.05.11_12.48.29_PM</name>
</trkpt>
</trkseg>
</trk>
</gpx>

------------------------------------------------------------------------------ 


I have a feeling this problem with the date may be because the date 
needs to be in the format yyyy/mm/dd and not as it is in the format 
dd/mm/yyyy.

If this is the case, is there any way to change this as I can't change 
the way the original gps data is formatted.

Thanks

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

Where to submit bug reports?

Dan Shumaker — 2012-05-11T18:11:24

Hi,

I am on Mac OSX Lion (10.7.3), 2.2 ghz intel core i7, 8 gig ram.  I try to convert the attached kml file to gpx format and the results are an almost empty file.  I have tried with the mac gui gpsbabel interface and on the command line.

The command line I tried is: gpsbabel -i kml -f "/Users/dan/Documents/Zigzag Loop.kml" -o gpx -F ~/zz.gpx

The command line version gave pretty much the same results as the gui (which follows here):

Here is a screen shot: 

 

This is what ends up in the zz.gpx file:

<?xml version="1.0" encoding="UTF-8"?>
<gpx
  version="1.0"
  creator="GPSBabel - http://www.gpsbabel.org"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xmlns="http://www.topografix.com/GPX/1/0"
  xsi:schemaLocation="http://www.topografix.com/GPX/1/0 http://www.topografix.com/GPX/1/0/gpx.xsd">
<time>2012-05-11T18:03:29Z</time>
</gpx>

and here is what is in the Zigzag Loop.kml file:

<?xml version="1.0" encoding="UTF-8"?>
<kml xmlns="http://www.opengis.net/kml/2.2" xmlns:gx="http://www.google.com/kml/ext/2.2" xmlns:kml="http://www.opengis.net/kml/2.2" xmlns:atom="http://www.w3.org/2005/Atom">
<Document>
<name>Zigzag Loop.kml</name>
<Style id="sh_cycling">
<IconStyle>
<color>ff1dff00</color>
<scale>1.2</scale>
<Icon>
<href>http://maps.google.com/mapfiles/kml/shapes/cycling.png</href>
</Icon>
<hotSpot x="0.5" y="0" xunits="fraction" yunits="fraction"/>
</IconStyle>
<LineStyle>
<color>ff1dff00</color>
<width>8</width>
</LineStyle>
</Style>
<Style id="sn_cycling3">
<IconStyle>
<color>ff1dff00</color>
<Icon>
<href>http://maps.google.com/mapfiles/kml/shapes/cycling.png</href>
</Icon>
<hotSpot x="0.5" y="0" xunits="fraction" yunits="fraction"/>
</IconStyle>
<LineStyle>
<color>ff1dff00</color>
<width>6</width>
</LineStyle>
</Style>
<StyleMap id="msn_cycling">
<Pair>
<key>normal</key>
<styleUrl>#sn_cycling3</styleUrl>
</Pair>
<Pair>
<key>highlight</key>
<styleUrl>#sh_cycling</styleUrl>
</Pair>
</StyleMap>
<Placemark>
<name>Zigzag Loop</name>
<styleUrl>#msn_cycling</styleUrl>
<gx:balloonVisibility>1</gx:balloonVisibility>
<gx:Track>
<when>2008-07-10T00:43:40Z</when>
<when>2008-07-10T00:44:09Z</when>
<when>2008-07-10T00:44:35Z</when>
<when>2008-07-10T00:45:53Z</when>
<when>2008-07-10T00:47:46Z</when>
<when>2008-07-10T00:48:44Z</when>
<when>2008-07-10T00:48:52Z</when>
<when>2008-07-10T00:49:20Z</when>
<when>2008-07-10T00:49:53Z</when>
<when>2008-07-10T00:52:40Z</when>
<when>2008-07-10T00:52:58Z</when>
<when>2008-07-10T00:53:12Z</when>
<when>2008-07-10T00:53:29Z</when>
<when>2008-07-10T00:53:46Z</when>
<when>2008-07-10T00:54:04Z</when>
<when>2008-07-10T00:54:22Z</when>
<when>2008-07-10T00:54:37Z</when>
<when>2008-07-10T00:55:16Z</when>
<when>2008-07-10T00:55:32Z</when>
<when>2008-07-10T00:55:52Z</when>
<when>2008-07-10T00:56:10Z</when>
<when>2008-07-10T00:56:24Z</when>
<when>2008-07-10T00:56:40Z</when>
<when>2008-07-10T00:56:57Z</when>
<when>2008-07-10T00:57:23Z</when>
<when>2008-07-10T00:57:36Z</when>
<when>2008-07-10T00:58:44Z</when>
<when>2008-07-10T00:58:59Z</when>
<when>2008-07-10T00:59:26Z</when>
<when>2008-07-10T00:59:46Z</when>
<when>2008-07-10T01:00:01Z</when>
<when>2008-07-10T01:00:14Z</when>
<when>2008-07-10T01:00:27Z</when>
<when>2008-07-10T01:00:42Z</when>
<when>2008-07-10T01:01:05Z</when>
<when>2008-07-10T01:01:21Z</when>
<when>2008-07-10T01:01:37Z</when>
<when>2008-07-10T01:02:00Z</when>
<when>2008-07-10T01:02:19Z</when>
<when>2008-07-10T01:02:33Z</when>
<when>2008-07-10T01:02:55Z</when>
<when>2008-07-10T01:03:08Z</when>
<when>2008-07-10T01:03:19Z</when>
<when>2008-07-10T01:03:43Z</when>
<when>2008-07-10T01:04:03Z</when>
<when>2008-07-10T01:04:19Z</when>
<when>2008-07-10T01:04:43Z</when>
<when>2008-07-10T01:05:06Z</when>
<when>2008-07-10T01:05:20Z</when>
<when>2008-07-10T01:05:48Z</when>
<when>2008-07-10T01:06:01Z</when>
<when>2008-07-10T01:06:13Z</when>
<when>2008-07-10T01:06:27Z</when>
<when>2008-07-10T01:06:43Z</when>
<when>2008-07-10T01:07:01Z</when>
<when>2008-07-10T01:07:19Z</when>
<when>2008-07-10T01:07:37Z</when>
<when>2008-07-10T01:07:58Z</when>
<when>2008-07-10T01:08:28Z</when>
<when>2008-07-10T01:08:45Z</when>
<when>2008-07-10T01:09:09Z</when>
<when>2008-07-10T01:09:30Z</when>
<when>2008-07-10T01:09:47Z</when>
<when>2008-07-10T01:10:05Z</when>
<when>2008-07-10T01:10:18Z</when>
<when>2008-07-10T01:10:38Z</when>
<when>2008-07-10T01:10:58Z</when>
<when>2008-07-10T01:11:18Z</when>
<when>2008-07-10T01:11:35Z</when>
<when>2008-07-10T01:11:52Z</when>
<when>2008-07-10T01:12:08Z</when>
<when>2008-07-10T01:12:28Z</when>
<when>2008-07-10T01:12:47Z</when>
<when>2008-07-10T01:13:10Z</when>
<when>2008-07-10T01:13:33Z</when>
<when>2008-07-10T01:13:48Z</when>
<when>2008-07-10T01:14:10Z</when>
<when>2008-07-10T01:14:37Z</when>
<when>2008-07-10T01:14:52Z</when>
<when>2008-07-10T01:15:09Z</when>
<when>2008-07-10T01:15:37Z</when>
<when>2008-07-10T01:15:55Z</when>
<when>2008-07-10T01:16:15Z</when>
<when>2008-07-10T01:16:41Z</when>
<when>2008-07-10T01:17:03Z</when>
<when>2008-07-10T01:17:26Z</when>
<when>2008-07-10T01:17:44Z</when>
<when>2008-07-10T01:18:04Z</when>
<when>2008-07-10T01:18:23Z</when>
<when>2008-07-10T01:18:43Z</when>
<when>2008-07-10T01:19:01Z</when>
<when>2008-07-10T01:19:25Z</when>
<when>2008-07-10T01:20:00Z</when>
<when>2008-07-10T01:20:15Z</when>
<when>2008-07-10T01:20:31Z</when>
<when>2008-07-10T01:21:25Z</when>
<when>2008-07-10T01:21:57Z</when>
<when>2008-07-10T01:22:13Z</when>
<when>2008-07-10T01:22:30Z</when>
<when>2008-07-10T01:22:50Z</when>
<when>2008-07-10T01:23:09Z</when>
<when>2008-07-10T01:23:34Z</when>
<when>2008-07-10T01:23:58Z</when>
<when>2008-07-10T01:24:24Z</when>
<when>2008-07-10T01:24:56Z</when>
<when>2008-07-10T01:25:14Z</when>
<when>2008-07-10T01:35:09Z</when>
<when>2008-07-10T01:35:38Z</when>
<when>2008-07-10T01:35:53Z</when>
<when>2008-07-10T01:36:12Z</when>
<when>2008-07-10T01:36:35Z</when>
<when>2008-07-10T01:37:05Z</when>
<when>2008-07-10T01:37:33Z</when>
<when>2008-07-10T01:37:54Z</when>
<when>2008-07-10T01:38:10Z</when>
<when>2008-07-10T01:38:29Z</when>
<when>2008-07-10T01:38:51Z</when>
<when>2008-07-10T01:39:10Z</when>
<when>2008-07-10T01:41:04Z</when>
<when>2008-07-10T01:41:11Z</when>
<when>2008-07-10T01:41:19Z</when>
<when>2008-07-10T01:41:41Z</when>
<when>2008-07-10T01:43:48Z</when>
<when>2008-07-10T01:44:05Z</when>
<when>2008-07-10T01:44:54Z</when>
<when>2008-07-10T01:45:16Z</when>
<when>2008-07-10T01:45:38Z</when>
<when>2008-07-10T01:45:55Z</when>
<when>2008-07-10T01:46:10Z</when>
<when>2008-07-10T01:46:33Z</when>
<when>2008-07-10T01:46:55Z</when>
<when>2008-07-10T01:47:13Z</when>
<when>2008-07-10T01:47:24Z</when>
<when>2008-07-10T01:47:44Z</when>
<when>2008-07-10T01:48:04Z</when>
<when>2008-07-10T01:48:12Z</when>
<when>2008-07-10T01:48:18Z</when>
<when>2008-07-10T01:48:28Z</when>
<when>2008-07-10T01:48:38Z</when>
<when>2008-07-10T01:48:43Z</when>
<when>2008-07-10T01:48:53Z</when>
<when>2008-07-10T01:49:04Z</when>
<when>2008-07-10T01:49:13Z</when>
<when>2008-07-10T01:49:20Z</when>
<when>2008-07-10T01:49:28Z</when>
<when>2008-07-10T01:49:32Z</when>
<when>2008-07-10T01:49:40Z</when>
<when>2008-07-10T01:49:48Z</when>
<when>2008-07-10T01:49:55Z</when>
<when>2008-07-10T01:50:12Z</when>
<when>2008-07-10T01:50:18Z</when>
<when>2008-07-10T01:50:26Z</when>
<when>2008-07-10T01:50:41Z</when>
<when>2008-07-10T01:50:50Z</when>
<when>2008-07-10T01:51:01Z</when>
<when>2008-07-10T01:51:17Z</when>
<when>2008-07-10T01:51:37Z</when>
<when>2008-07-10T01:51:59Z</when>
<when>2008-07-10T01:52:13Z</when>
<when>2008-07-10T01:52:56Z</when>
<when>2008-07-10T01:53:14Z</when>
<when>2008-07-10T01:53:30Z</when>
<when>2008-07-10T01:54:29Z</when>
<when>2008-07-10T01:54:51Z</when>
<when>2008-07-10T01:55:44Z</when>
<when>2008-07-10T01:56:22Z</when>
<when>2008-07-10T01:56:37Z</when>
<when>2008-07-10T01:56:49Z</when>
<when>2008-07-10T01:56:57Z</when>
<when>2008-07-10T01:57:07Z</when>
<when>2008-07-10T01:57:36Z</when>
<when>2008-07-10T01:58:11Z</when>
<when>2008-07-10T01:59:52Z</when>
<when>2008-07-10T02:01:48Z</when>
<when>2008-07-10T02:03:47Z</when>
<when>2008-07-10T02:04:24Z</when>
<when>2008-07-10T02:04:37Z</when>
<when>2008-07-10T02:04:43Z</when>
<when>2008-07-10T02:04:52Z</when>
<when>2008-07-10T02:05:01Z</when>
<when>2008-07-10T02:05:13Z</when>
<when>2008-07-10T02:05:19Z</when>
<when>2008-07-10T02:05:30Z</when>
<when>2008-07-10T02:05:40Z</when>
<when>2008-07-10T02:05:54Z</when>
<when>2008-07-10T02:06:02Z</when>
<when>2008-07-10T02:06:12Z</when>
<when>2008-07-10T02:06:24Z</when>
<when>2008-07-10T02:06:36Z</when>
<when>2008-07-10T02:06:46Z</when>
<when>2008-07-10T02:06:58Z</when>
<when>2008-07-10T02:07:16Z</when>
<when>2008-07-10T02:07:30Z</when>
<when>2008-07-10T02:07:38Z</when>
<when>2008-07-10T02:07:50Z</when>
<when>2008-07-10T02:08:11Z</when>
<when>2008-07-10T02:08:25Z</when>
<when>2008-07-10T02:08:52Z</when>
<when>2008-07-10T02:09:04Z</when>
<when>2008-07-10T02:09:15Z</when>
<when>2008-07-10T02:09:26Z</when>
<when>2008-07-10T02:09:32Z</when>
<when>2008-07-10T02:09:41Z</when>
<when>2008-07-10T02:09:58Z</when>
<when>2008-07-10T02:10:06Z</when>
<when>2008-07-10T02:10:19Z</when>
<when>2008-07-10T02:10:34Z</when>
<when>2008-07-10T02:10:45Z</when>
<when>2008-07-10T02:10:56Z</when>
<when>2008-07-10T02:11:07Z</when>
<when>2008-07-10T02:11:29Z</when>
<when>2008-07-10T02:11:40Z</when>
<when>2008-07-10T02:12:03Z</when>
<when>2008-07-10T02:12:22Z</when>
<when>2008-07-10T02:12:34Z</when>
<when>2008-07-10T02:12:55Z</when>
<when>2008-07-10T02:13:11Z</when>
<when>2008-07-10T02:13:27Z</when>
<when>2008-07-10T02:13:45Z</when>
<when>2008-07-10T02:14:08Z</when>
<when>2008-07-10T02:14:17Z</when>
<when>2008-07-10T02:14:33Z</when>
<when>2008-07-10T02:14:51Z</when>
<when>2008-07-10T02:15:38Z</when>
<when>2008-07-10T02:15:52Z</when>
<when>2008-07-10T02:16:05Z</when>
<when>2008-07-10T02:16:26Z</when>
<when>2008-07-10T02:16:44Z</when>
<when>2008-07-10T02:17:00Z</when>
<when>2008-07-10T02:17:14Z</when>
<when>2008-07-10T02:17:33Z</when>
<when>2008-07-10T02:17:41Z</when>
<when>2008-07-10T02:18:01Z</when>
<when>2008-07-10T02:18:37Z</when>
<when>2008-07-10T02:18:51Z</when>
<when>2008-07-10T02:19:02Z</when>
<when>2008-07-10T02:19:16Z</when>
<when>2008-07-10T02:19:26Z</when>
<when>2008-07-10T02:19:40Z</when>
<when>2008-07-10T02:19:48Z</when>
<when>2008-07-10T02:20:22Z</when>
<when>2008-07-10T02:20:27Z</when>
<when>2008-07-10T02:20:37Z</when>
<when>2008-07-10T02:20:51Z</when>
<when>2008-07-10T02:20:56Z</when>
<when>2008-07-10T02:21:00Z</when>
<when>2008-07-10T02:21:17Z</when>
<when>2008-07-10T02:21:23Z</when>
<when>2008-07-10T02:21:28Z</when>
<when>2008-07-10T02:21:33Z</when>
<when>2008-07-10T02:21:37Z</when>
<when>2008-07-10T02:22:48Z</when>
<when>2008-07-10T02:23:59Z</when>
<gx:coord>-122.547896 37.90728 20.805664</gx:coord>
<gx:coord>-122.548253 37.907962 23.208984</gx:coord>
<gx:coord>-122.548479 37.908499 29.45752</gx:coord>
<gx:coord>-122.54946 37.910077 26.092896</gx:coord>
<gx:coord>-122.551764 37.911861 31.38012700000001</gx:coord>
<gx:coord>-122.552238 37.914121 34.26416</gx:coord>
<gx:coord>-122.552924 37.91409 33.783447</gx:coord>
<gx:coord>-122.553076 37.915335 38.109375</gx:coord>
<gx:coord>-122.553168 37.916624 37.62866200000001</gx:coord>
<gx:coord>-122.554864 37.921357 54.93237300000003</gx:coord>
<gx:coord>-122.555574 37.921239 59.73913600000001</gx:coord>
<gx:coord>-122.555641 37.921599 67.429688</gx:coord>
<gx:coord>-122.555733 37.92192 70.31347700000002</gx:coord>
<gx:coord>-122.55592 37.922185 72.23620600000001</gx:coord>
<gx:coord>-122.556078 37.922517 70.794189</gx:coord>
<gx:coord>-122.556345 37.922823 72.716919</gx:coord>
<gx:coord>-122.556804 37.922947 79.92663600000002</gx:coord>
<gx:coord>-122.55722 37.923724 86.175293</gx:coord>
<gx:coord>-122.55719 37.92406 91.462524</gx:coord>
<gx:coord>-122.557398 37.924473 95.78845200000001</gx:coord>
<gx:coord>-122.557664 37.924779 98.67248499999999</gx:coord>
<gx:coord>-122.557848 37.925084 100.114502</gx:coord>
<gx:coord>-122.557978 37.925428 107.324341</gx:coord>
<gx:coord>-122.558491 37.92548 104.921021</gx:coord>
<gx:coord>-122.559042 37.925834 116.456787</gx:coord>
<gx:coord>-122.55906 37.926197 118.860107</gx:coord>
<gx:coord>-122.559452 37.927871 123.186157</gx:coord>
<gx:coord>-122.559833 37.928098 127.511963</gx:coord>
<gx:coord>-122.560039 37.928644 135.202515</gx:coord>
<gx:coord>-122.560048 37.929127 134.241211</gx:coord>
<gx:coord>-122.560038 37.929467 130.395996</gx:coord>
<gx:coord>-122.560394 37.929172 131.3573</gx:coord>
<gx:coord>-122.560476 37.928811 127.511963</gx:coord>
<gx:coord>-122.560529 37.928412 127.992554</gx:coord>
<gx:coord>-122.560755 37.927899 131.3573</gx:coord>
<gx:coord>-122.560617 37.927538 134.721924</gx:coord>
<gx:coord>-122.560189 37.927268 139.047852</gx:coord>
<gx:coord>-122.560104 37.926681 149.141602</gx:coord>
<gx:coord>-122.560436 37.926273 153.467651</gx:coord>
<gx:coord>-122.560237 37.92597 155.390259</gx:coord>
<gx:coord>-122.560017 37.925447 157.793579</gx:coord>
<gx:coord>-122.560219 37.925183 159.235474</gx:coord>
<gx:coord>-122.560643 37.92525 163.080811</gx:coord>
<gx:coord>-122.561422 37.925178 167.406738</gx:coord>
<gx:coord>-122.562046 37.925184 170.290649</gx:coord>
<gx:coord>-122.562528 37.925246 175.09729</gx:coord>
<gx:coord>-122.563081 37.925372 182.787842</gx:coord>
<gx:coord>-122.563237 37.924863 183.749023</gx:coord>
<gx:coord>-122.563557 37.924591 184.229858</gx:coord>
<gx:coord>-122.563093 37.924356 189.516968</gx:coord>
<gx:coord>-122.562652 37.924318 195.284912</gx:coord>
<gx:coord>-122.562354 37.924136 195.765625</gx:coord>
<gx:coord>-122.562108 37.923818 198.649536</gx:coord>
<gx:coord>-122.562057 37.923447 201.533569</gx:coord>
<gx:coord>-122.562536 37.923292 202.014282</gx:coord>
<gx:coord>-122.563041 37.923229 204.898071</gx:coord>
<gx:coord>-122.563578 37.923365 206.340088</gx:coord>
<gx:coord>-122.56413 37.923183 214.03064</gx:coord>
<gx:coord>-122.564603 37.922679 210.666016</gx:coord>
<gx:coord>-122.564816 37.922359 212.588623</gx:coord>
<gx:coord>-122.564562 37.921827 220.759888</gx:coord>
<gx:coord>-122.564086 37.921422 227.008545</gx:coord>
<gx:coord>-122.563555 37.921372 228.931152</gx:coord>
<gx:coord>-122.563044 37.921496 232.776489</gx:coord>
<gx:coord>-122.562618 37.921421 237.102295</gx:coord>
<gx:coord>-122.56205 37.92117 242.870239</gx:coord>
<gx:coord>-122.562094 37.920803 243.831543</gx:coord>
<gx:coord>-122.562315 37.920382 246.715454</gx:coord>
<gx:coord>-122.562578 37.920061 249.599487</gx:coord>
<gx:coord>-122.563075 37.920176 251.041382</gx:coord>
<gx:coord>-122.563433 37.920016 252.963989</gx:coord>
<gx:coord>-122.563055 37.919607 256.809326</gx:coord>
<gx:coord>-122.562892 37.919171 260.17395</gx:coord>
<gx:coord>-122.562625 37.918858 262.577148</gx:coord>
<gx:coord>-122.562281 37.918633 261.135254</gx:coord>
<gx:coord>-122.562514 37.91839 260.6545410000001</gx:coord>
<gx:coord>-122.56308 37.918348 262.577148</gx:coord>
<gx:coord>-122.563376 37.918847 262.577148</gx:coord>
<gx:coord>-122.563471 37.919162 263.538574</gx:coord>
<gx:coord>-122.563586 37.919486 264.9805910000001</gx:coord>
<gx:coord>-122.563924 37.920002 268.3450930000001</gx:coord>
<gx:coord>-122.564341 37.920075 273.632446</gx:coord>
<gx:coord>-122.564738 37.919926 276.035645</gx:coord>
<gx:coord>-122.565224 37.920006 279.880859</gx:coord>
<gx:coord>-122.565501 37.920351 281.803589</gx:coord>
<gx:coord>-122.56594 37.920595 288.0522460000001</gx:coord>
<gx:coord>-122.566306 37.920595 289.494141</gx:coord>
<gx:coord>-122.566748 37.920498 292.858765</gx:coord>
<gx:coord>-122.567173 37.920479 295.7426760000001</gx:coord>
<gx:coord>-122.567503 37.920765 298.1461180000001</gx:coord>
<gx:coord>-122.567832 37.920958 299.1073000000001</gx:coord>
<gx:coord>-122.568254 37.921254 301.5106200000001</gx:coord>
<gx:coord>-122.568907 37.921262 300.0687260000001</gx:coord>
<gx:coord>-122.569275 37.921376 302.4719240000001</gx:coord>
<gx:coord>-122.56962 37.921535 307.2785640000001</gx:coord>
<gx:coord>-122.570259 37.921147 299.1073000000001</gx:coord>
<gx:coord>-122.570236 37.920756 309.201172</gx:coord>
<gx:coord>-122.570062 37.920473 314.488403</gx:coord>
<gx:coord>-122.569767 37.920216 318.814331</gx:coord>
<gx:coord>-122.569634 37.91983 320.2563480000001</gx:coord>
<gx:coord>-122.569995 37.919592 324.582275</gx:coord>
<gx:coord>-122.57061 37.919505 329.3889160000001</gx:coord>
<gx:coord>-122.571222 37.919477 329.869507</gx:coord>
<gx:coord>-122.571885 37.919446 334.676147</gx:coord>
<gx:coord>-122.572426 37.919072 339.963379</gx:coord>
<gx:coord>-122.572832 37.91909 341.8859860000001</gx:coord>
<gx:coord>-122.572765 37.919401 346.212036</gx:coord>
<gx:coord>-122.572226 37.919677 346.212036</gx:coord>
<gx:coord>-122.571786 37.919704 346.212036</gx:coord>
<gx:coord>-122.571426 37.919988 348.615234</gx:coord>
<gx:coord>-122.571941 37.920114 351.0184330000001</gx:coord>
<gx:coord>-122.572706 37.919741 354.383179</gx:coord>
<gx:coord>-122.573347 37.919487 357.747803</gx:coord>
<gx:coord>-122.573883 37.919402 362.07373</gx:coord>
<gx:coord>-122.574173 37.91964 363.515747</gx:coord>
<gx:coord>-122.573816 37.919908 365.9189450000001</gx:coord>
<gx:coord>-122.573245 37.919981 369.764282</gx:coord>
<gx:coord>-122.572984 37.920186 369.764282</gx:coord>
<gx:coord>-122.571534 37.920736 363.515747</gx:coord>
<gx:coord>-122.571176 37.920906 358.228394</gx:coord>
<gx:coord>-122.570782 37.92104 354.383179</gx:coord>
<gx:coord>-122.570327 37.921127 347.173218</gx:coord>
<gx:coord>-122.569906 37.921542 326.0241700000001</gx:coord>
<gx:coord>-122.570213 37.92134 317.853027</gx:coord>
<gx:coord>-122.569647 37.919853 320.737061</gx:coord>
<gx:coord>-122.570018 37.919571 323.6209720000001</gx:coord>
<gx:coord>-122.570572 37.919524 329.3889160000001</gx:coord>
<gx:coord>-122.570971 37.919495 332.272827</gx:coord>
<gx:coord>-122.571376 37.919458 332.272827</gx:coord>
<gx:coord>-122.572034 37.91948 333.234131</gx:coord>
<gx:coord>-122.572464 37.919056 339.963379</gx:coord>
<gx:coord>-122.573013 37.918675 341.8859860000001</gx:coord>
<gx:coord>-122.573524 37.918583 342.84729</gx:coord>
<gx:coord>-122.574507 37.918922 339.963379</gx:coord>
<gx:coord>-122.575082 37.918277 343.327881</gx:coord>
<gx:coord>-122.575503 37.917904 340.9246830000001</gx:coord>
<gx:coord>-122.575483 37.917465 339.4826660000001</gx:coord>
<gx:coord>-122.575542 37.917011 337.079468</gx:coord>
<gx:coord>-122.576108 37.917317 336.118164</gx:coord>
<gx:coord>-122.576692 37.917103 335.1567380000001</gx:coord>
<gx:coord>-122.577262 37.917462 334.195435</gx:coord>
<gx:coord>-122.578089 37.917731 333.7147220000001</gx:coord>
<gx:coord>-122.57821 37.917373 332.75354</gx:coord>
<gx:coord>-122.57854 37.917014 329.869507</gx:coord>
<gx:coord>-122.579002 37.916758 326.504883</gx:coord>
<gx:coord>-122.578937 37.916464 326.504883</gx:coord>
<gx:coord>-122.579008 37.915814 326.985596</gx:coord>
<gx:coord>-122.579183 37.915224 325.543579</gx:coord>
<gx:coord>-122.579031 37.914891 325.543579</gx:coord>
<gx:coord>-122.57852 37.913787 316.8917240000001</gx:coord>
<gx:coord>-122.578668 37.913348 314.969116</gx:coord>
<gx:coord>-122.578411 37.912743 310.1624760000001</gx:coord>
<gx:coord>-122.578026 37.911852 302.952515</gx:coord>
<gx:coord>-122.577617 37.911448 303.433228</gx:coord>
<gx:coord>-122.576928 37.911192 301.5106200000001</gx:coord>
<gx:coord>-122.576255 37.911494 290.455566</gx:coord>
<gx:coord>-122.575617 37.911655 287.09082</gx:coord>
<gx:coord>-122.574303 37.911801 278.919678</gx:coord>
<gx:coord>-122.574559 37.911972 224.124512</gx:coord>
<gx:coord>-122.574174 37.911835 217.395386</gx:coord>
<gx:coord>-122.574055 37.911777 212.588623</gx:coord>
<gx:coord>-122.573825 37.911732 173.655273</gx:coord>
<gx:coord>-122.573187 37.911988 178.461914</gx:coord>
<gx:coord>-122.571957 37.91199 177.981201</gx:coord>
<gx:coord>-122.571086 37.911724 173.655273</gx:coord>
<gx:coord>-122.570407 37.91205 105.401733</gx:coord>
<gx:coord>-122.569706 37.912693 103.959717</gx:coord>
<gx:coord>-122.568647 37.912186 104.44043</gx:coord>
<gx:coord>-122.567733 37.911502 104.921021</gx:coord>
<gx:coord>-122.566637 37.910921 104.921021</gx:coord>
<gx:coord>-122.564066 37.9117 102.998291</gx:coord>
<gx:coord>-122.562495 37.911624 94.82714799999999</gx:coord>
<gx:coord>-122.560036 37.908411 93.385132</gx:coord>
<gx:coord>-122.560147 37.90823 86.175293</gx:coord>
<gx:coord>-122.554389 37.905087 9.750610000000002</gx:coord>
<gx:coord>-122.551604 37.904829 14.557007</gx:coord>
<gx:coord>-122.550361 37.905031 15.999023</gx:coord>
<gx:coord>-122.549766 37.905174 15.999023</gx:coord>
<gx:coord>-122.549077 37.905725 16.479736</gx:coord>
<gx:coord>-122.548473 37.906112 16.479736</gx:coord>
<gx:coord>-122.547984 37.906442 17.441162</gx:coord>
<gx:coord>-122.547644 37.906632 18.402344</gx:coord>
<gx:coord>-122.546908 37.906578 18.402344</gx:coord>
<gx:coord>-122.546356 37.906634 22.247559</gx:coord>
<gx:coord>-122.545673 37.906275 24.170288</gx:coord>
<gx:coord>-122.545221 37.905967 22.728271</gx:coord>
<gx:coord>-122.544523 37.905542 21.766968</gx:coord>
<gx:coord>-122.543655 37.905028 21.286377</gx:coord>
<gx:coord>-122.542759 37.904549 20.805664</gx:coord>
<gx:coord>-122.541978 37.904183 20.805664</gx:coord>
<gx:coord>-122.541053 37.903772 17.921753</gx:coord>
<gx:coord>-122.539448 37.903744 14.557007</gx:coord>
<gx:coord>-122.538182 37.903734 12.153809</gx:coord>
<gx:coord>-122.537656 37.903731 15.03772</gx:coord>
<gx:coord>-122.536922 37.903726 17.441162</gx:coord>
<gx:coord>-122.535779 37.903198 19.84436</gx:coord>
<gx:coord>-122.534965 37.902782 18.402344</gx:coord>
<gx:coord>-122.533044 37.901905 13.595825</gx:coord>
<gx:coord>-122.531996 37.901456 11.673218</gx:coord>
<gx:coord>-122.530982 37.901007 9.269897000000002</gx:coord>
<gx:coord>-122.529964 37.900689 8.308593999999999</gx:coord>
<gx:coord>-122.529454 37.900553 7.347168000000001</gx:coord>
<gx:coord>-122.528775 37.900585 6.866455000000001</gx:coord>
<gx:coord>-122.528364 37.901288 6.866455000000001</gx:coord>
<gx:coord>-122.528166 37.901653 5.424561</gx:coord>
<gx:coord>-122.527927 37.902265 5.905273000000001</gx:coord>
<gx:coord>-122.527653 37.902716 8.789185</gx:coord>
<gx:coord>-122.527376 37.902955 12.153809</gx:coord>
<gx:coord>-122.527137 37.903188 15.03772</gx:coord>
<gx:coord>-122.526978 37.903499 17.441162</gx:coord>
<gx:coord>-122.526859 37.904058 20.805664</gx:coord>
<gx:coord>-122.52694 37.904339 21.766968</gx:coord>
<gx:coord>-122.527517 37.904793 23.689575</gx:coord>
<gx:coord>-122.52751 37.90541 29.45752</gx:coord>
<gx:coord>-122.527579 37.905741 30.418823</gx:coord>
<gx:coord>-122.528124 37.906076 35.22546400000001</gx:coord>
<gx:coord>-122.528276 37.906436 38.109375</gx:coord>
<gx:coord>-122.528527 37.906762 37.62866200000001</gx:coord>
<gx:coord>-122.528828 37.907132 37.148071</gx:coord>
<gx:coord>-122.52823 37.907499 43.87731900000001</gx:coord>
<gx:coord>-122.528022 37.907753 44.358032</gx:coord>
<gx:coord>-122.528097 37.908205 46.28064000000001</gx:coord>
<gx:coord>-122.528405 37.908674 47.72253400000001</gx:coord>
<gx:coord>-122.528463 37.910168 55.893799</gx:coord>
<gx:coord>-122.528115 37.910523 59.25842300000001</gx:coord>
<gx:coord>-122.527544 37.91062 63.103638</gx:coord>
<gx:coord>-122.52786 37.911174 65.98767100000002</gx:coord>
<gx:coord>-122.52799 37.911784 65.50708000000002</gx:coord>
<gx:coord>-122.52736 37.911968 71.274902</gx:coord>
<gx:coord>-122.527076 37.912435 74.15881299999999</gx:coord>
<gx:coord>-122.527094 37.913204 76.562134</gx:coord>
<gx:coord>-122.526751 37.913354 77.04284699999999</gx:coord>
<gx:coord>-122.5261 37.913919 80.88818400000002</gx:coord>
<gx:coord>-122.526811 37.915037 84.73339799999999</gx:coord>
<gx:coord>-122.526613 37.915516 86.65600600000003</gx:coord>
<gx:coord>-122.526213 37.915853 90.02063000000003</gx:coord>
<gx:coord>-122.52574 37.91627 93.86584499999999</gx:coord>
<gx:coord>-122.525525 37.916613 95.307739</gx:coord>
<gx:coord>-122.525481 37.917134 96.74987800000001</gx:coord>
<gx:coord>-122.526005 37.917359 95.307739</gx:coord>
<gx:coord>-122.529331 37.919432 95.307739</gx:coord>
<gx:coord>-122.529734 37.919983 95.307739</gx:coord>
<gx:coord>-122.531076 37.919437 92.42395000000002</gx:coord>
<gx:coord>-122.529855 37.921532 74.15881299999999</gx:coord>
<gx:coord>-122.530174 37.921967 73.678223</gx:coord>
<gx:coord>-122.530389 37.922343 68.87158200000002</gx:coord>
<gx:coord>-122.530767 37.923492 54.451782</gx:coord>
<gx:coord>-122.530172 37.9239 48.203369</gx:coord>
<gx:coord>-122.529648 37.924075 45.31921400000001</gx:coord>
<gx:coord>-122.529241 37.924322 42.916016</gx:coord>
<gx:coord>-122.529183 37.924657 40.032104</gx:coord>
<gx:coord>-122.530001 37.92541 30.899536</gx:coord>
<gx:coord>-122.530208 37.925308 27.534912</gx:coord>
<ExtendedData>
<SchemaData schemaUrl="#schema">
<gx:SimpleArrayData kml:name="depth">
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
<gx:value>0.0</gx:value>
</gx:SimpleArrayData>
</SchemaData>
</ExtendedData>
</gx:Track>
</Placemark>
</Document>
</kml>

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

GPSBabel error while trying to connect to DG-200

Ofir Shemesh — 2012-05-10T23:05:32

hi,
i'm trying to connect GPSBabel (version 1.4.3) to GlobalSat *DG-200 -* it
is on the device list.
bu i'm getting an error!
the error say: Unsupported serial speed: 230400

here is the full log:

gpsbabel -D9 -t -i dg-200,erase=0,erase_only=0 -f COM7 -o
gpx,suppresswhite=0,logpoint=0,humminbirdextensions=0,garminextensions=0 -F
C:/Users/Admin/Desktop/wpt11.gpx -o gpx -F
C:/Users/Admin/AppData/Local/Temp/qt_temp.jl2192

options: module/option=value: dg-200/erase="0" (=default)

options: module/option=value: dg-200/erase_only="0" (=default)

Translated port name: "COM7"

GPSBabel Version: 1.4.3

Unsupported serial speed: 230400

Error running gpsbabel: Process exited unsucessfully with code 1


???

why can't i connect

???


tnx.
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

Realtime updates on Mac giving Bus error: 10

Mark Drayton — 2012-05-10T08:02:10

I would really appreciate some help with this problem.

A little background - I bought a Garmin Rino 650 after researching that it
will output NMEA data via the USB port. I checked the manual - there are
options on the device to output a location stream in a number of formats
(Garmin Spanner, Garmin Serial, NMEA in/out, Text out, RTCM). So I take the
plunge...

However it seems that when using a Mac it is only possible through using a
piece of middleware like GPSBabel to capture this data. I am not even able
to get Google Earth to recognise the device to show realtime updates. GE
just scans /dev for serial ports and will not see anything it understands
on 'usb:' on either NMEA or Garmin PVT protocols.

My principal objective here is to capture the NMEA stream, parse it and
write it to a MySQL database, so I either need a text stream or an output
file I can pick up

GPSBabel is working fine when I use the gui to make a request such as:

gpsbabel -w -r -t -i
garmin,snwhite=0,get_posn=0,power_off=0,erase_t=0,resettime=0 -f usb: -o
unicsv,format=0,filename=0 -F /tmp/garminout.csv

However when I try to use the terminal to run something like:

*gpsbabel -T -i garmin -f usb: -o kml -F xxx.kml*
*
*
I get Bus error: 10. Same with any other attempt i've tried with the -T
switch. No output is created at all.

Could anyone suggest why I am able to use GPSBabel OK but not able to use
the -T suffix ? Other commands from the terminal work fine. The firmware on
the Garmin is the latest; i'm running Lion 10.7.4

It would also be helpful to know which of the output formats are supported
with realtime output.

thanks very much
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

Conversion issue - 0 Bytes output

tojesky — 2012-05-01T21:28:54

I tried to use GPSBabel to convert from a GoogleEarth file (.kml; extracted from the .kmx file) to a 
TomTom itinerary file (.itn) which are valid options in the application.  The 
conversion appears to have run and even gave me the preview of the conversion (I 
assume) and it said it completed.  When I closed the conversion, I checked the 
output file and it had 0 bytes. 

Do I have to do another step or option to get the itinerary file? Am I missing something?

More information.  The .kml file has a route, tracks, and POIs.  This is the link to the .kmz file that I used.

http://www.raceacrossamerica.org/userfiles/file/2012/RAAM%202012.kmz 


Tim
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

Filter out low speed

Harry Matthiesen Jensen — 2012-04-28T09:44:38

Can someone tell me how to filter out records with a speed lower than
for example 2km/h?

I am working on a Garmin Dakota 20 "Current.gpx" file, and the filter
options are = -x track,pack,speed,course,split=300s,title=%Y-%m-%dT%T

Everything working perfectly ;-)
..except that I want to remove all records with speed below 2 km/h

Thank you in advance.

Canmore GT-730FL-S

Andrew Malota — 2012-04-23T19:17:02

Howdy All -
Having some trouble with gpsbabel and my GT-730FL-S unit.

If I grab my track log from the unit with:
gpsbabel -i skytraq,baud=230400 -f /dev/ttyUSB0 -o gpx -F /tmp/poop.gpx

the first point in the track is:
<trkpt lat="0.030309890" lon="44.968534372">
  <ele>6063243649.881560</ele>
  <time>2012-04-23T16:23:20Z</time>
  <speed>0.000000</speed>
  <name>TP0001</name>
</trkpt>

elevation, lat, and long are all way way off, and time is just a bit
off, compared to the first point in the track when extracted via the
stupid windows tool:
WNO TOW Time Date DECEF_X DECEF_Y DECEF_Z ECEF_X ECEF_Y ECEF_Z Speed
Longitude Latitude Altitude Mode
1685 145413 16:23:18 4/23/2012 0 0 0 -740815 -5454823 3210852 0
-97.733975 30.421571 184.224399 1

what additional information will help troubleshoot this?

Thanks!
Andrew

------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2
_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

Unable to import waypoints from Datalogger

ALT SHN — 2012-04-22T12:34:39

Hello list!

I recently bought a Blumax GPS 4044 Datalogger. (I already use GPS Babel
GUI on Windows with Garmin GPS devices)

Although I import tracks to .gpx without any problem, I've been unable to
import waypoints (the device as push button just for waypoints). In fact
the "Waypoint" option isn't available when using these configs:

Input - MTK Logger
Output - GPX XML

I've tried other Input options, but the only option that communicates with
this data logger is "MTK Logger".

Any suggestion on how to work arround this issue?

Thanks in advance

(Win7 Home; GPS Babel 1.4.3 GUI)

GPS IGoTU GT-800 Pro

Guillaume — 2012-04-19T12:44:37

Hello,

I have a GPS Mobile Action : IGoTU GT-800 Pro : http://global.mobileaction.com/product/product_i-gotU_GT-800pro.jsp and I would like to make it work on linux (Fedora 16 or debian SID). I tried GPSBabel but I didn't see the format in the list so I don't know wich command I have to use to communicate with my GPS.

My question is :is there a format compatible with my GPS ? and if not, is there a chance to have it in the next version of GPSBabel ?

Thank you 


Guillaume------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

Mac Version documentation

Richard Rasch — 2012-04-18T14:02:33

The Mac version "GPSBabelFE" does not seem to have a debug window as outlined here:
http://www.gpsbabel.org/os/OSX_debug.html

Apple-Option-v does nothing. Is there another way to access this window?

Also, using the terminal to issue direct commands the directory path should be
"Contents/MacOS" and not "Contents/Resources"

In my case the full path is:
Applications/GPSBabelFE.app/Contents/MacOS/gpsbabel

-Richard
------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second 
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev
_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

Download Tracks from Garmin device

Richard Rasch — 2012-04-17T14:20:23

I am able to download tracks from my Garmin GPS 76 using GPSBabel 1.3.5 but I am NOT able to do the same using the latest version 1.4.3. The track check box is not clickable.
I am using a Mac with Snow Leopard, 10.6.8
I need to upgrade to Lion and can't run GPSBabel 1.3.5 in the future.
Any Ideas?

-Richard
------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second 
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev
_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

bloating instead of simplifying a track

Andreas Loeffler — 2012-04-17T05:32:20

Hi

I'm browsing through the current filter documentation but could not find
what I would need right now.
The question is if it would be possible to add additional trackpoints to
an gps track on sections that would extend a given length?
Usually a recored gps track would have sufficient trackpoints.
But if you have manually crafted a course (eg as gpx) and you have some
straight paths in there, where you only have the two endpoints and the
length for this straight is 1000m I would want to have one extra point
every 100 meter for example.

Or maybe simpler something like the opposite of the simplify filter
where you specify the minimum no of trackpoints (ignoring the length
between the points). So if a given gps track has 1000 trackpoints you
specify min=3000 you get two more trackpoints between each existing
ones.

Someone has an idea if/how gspbabel could be used to help with this
task?
or some other way (I'm trying to put together some perl at the moment)


andreas



------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second 
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev
_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

Garmin Edge 800 FIT format won't convert afterfirmware upgrade

Nils — 2012-04-12T14:42:24

Hello,

I have a Garmin Edge 800, and since upgrading the unit to the latest
firmware, the .fit format seems to have changed, I can't convert to GPX
anymore.

gpsbabel -D9 -i garmin_fit -f 2012-04-12-14-53-58.fit -o gpx -F
2012-04-12-14-53-58.fit.gpx
GPSBabel Version: 1.4.3
fit: record truncated

...and that's it. Attached are a file that works (with the older date
and converted gpx), and one that doesn't.

gpsbabel is compiled from todays SVN sources, Firmware in the unit is
2.40, I'm not sure what the old version was, but it wasn't too old as I
bought the unit just last summer.

Any ideas?

Thanks
Nils

------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

removing waypoints from gps

Tyler Smith — 2012-04-11T17:20:08

Hi,

I am using gpsbabel to transfer waypoints back and forth between my
computer and my GPSmap76Cx. This works fine, and is pretty easy. I was
wondering if there's anyway to remove the waypoints from the GPS? So
far the only option I have found is to manually select and delete each
waypoint from the GPS menu, which is quite tedious. Does gpsbabel
provide any way to do this more automatically?

Thank you,

Tyler

------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second 
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev
_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

documentation bug

Tyler Smith — 2012-04-10T20:08:00

Hi,

I'm just getting started with gpsbabel on Debian Wheezy. There is a
small bug in the documentation at:
http://www.gpsbabel.org/os/Linux_Hotplug.html

For Debian at least, udev rules should use 'ATTR' instead of 'SYSFS'.
So the recommended udev rule:

  SYSFS{idVendor}=="091e", SYSFS{idProduct}=="0003", MODE="666",
GROUP="plugdev"

should be:

  ATTR{idVendor}=="091e", ATTR{idProduct}=="0003", MODE="666", GROUP="plugdev"

Thanks,

Tyler

------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second 
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev
_______________________________________________
Gpsbabel-misc mailing list http://www.gpsbabel.org
Gpsbabel-misc< at >lists.sourceforge.net
To unsubscribe, change list options, or see archives, visit:
https://lists.sourceforge.net/lists/listinfo/gpsbabel-misc

problem converting from kml

Chip Ziering — 2012-04-05T19:35:02

I'm trying to convert several kml files (one attached) to gpx.  I downloaded garmin gps tracks to Google Earth, and then saved it as kml.  The file is about 50K, and has many trackpoints, which come up fine in Google Earth.  But when I use GPSBabel (1.4.3 on Windows Vista) to convert to gpx, the resulting file is only 357 bytes, clearly missing all trackpoints, even though it reports, "Translation successful".  I tried playing with various options, but always with the same result.  I also tried running from a command prompt, using only defaults, and that did the same thing.  Is there something I'm doing wrong?

Many thanks,
Chip Ziering