http://blog.gmane.org/gmane.comp.handhelds.maemo.user hourly 1 1901-01-01T00:00+00:00 http://gmane.org/img/gmane-25t.png http://gmane.org http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17392 <pre>Hello, friends, I wrote a shell-script which changes the mac-address of my device (Nokia n900) on loading and put it in /etc/network/if-pre-up.d. It worked well with orginal Nokia's firmware but with CSSU firmware (testing and thumb) it doesn't work. With CSSU firmware it loads factory mac-address not indicated in my script. It needs to run that script manually for loading needed mac-address. Probably, something in SCCU firmware rewrite my new mac-address. I tried to put that script into /etc/network/if-up.d, but had the same result. How I can resolve my problem? </pre> James Brown 2013-05-24T12:32:23 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17384 <pre>I reflashed my n900 in the case of crashing it after installing the latest version of CSSU Thumb, I installed the latest version of the kernel power (including u-boot) and the latest CSSU testing. It worked well but after restoring packeges I used earlier my device does not load - after loading u-boot menu and choicing the kernel for loading it writes "malformed function" and does not want to load. I tried to reflash it but when I connect it to my PC instead reflashing it loads u-boot menu. What I need to do for restore my device? </pre> James Brown 2013-05-13T17:22:39 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17381 <pre>Hi, I have compiled my project, it uses :--- 1&gt; WX-widget base class (i.e uses socket, thread, string related classes..... no GUI stuff) 2&gt; Libwebsocket (http://libwebsockets.org/trac) When i run executable under sb2( scratchbox ). I get following error x$ sb2 -eR vscpd qemu: uncaught target signal 11 (Segmentation fault) - core dumped Exit reason and status: signal 11 (core dumped) Please suggest this error is because of what ? //Allan </pre> allan George 2013-04-07T06:14:35 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17378 <pre>Dear all, Did you hear about viber.com ? How can i install same thing under N900? --mohsen </pre> Mohsen Pahlevanzadeh 2013-01-09T16:26:41 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17376 <pre>Hello everybody, I have updated my N900 recently from testing or even devel sources. Then the PDF viewer stopped working. It says it doesn’t have enough memory to open that file. Just by any file I try to open. What package should I reinstall or downgrade? Or what else should I do? Thanks. </pre> Pavel Řezníček 2012-12-26T06:59:52 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17375 <pre>Hi, I am trying to use leiningen for Clojure development through a bash shell installed on my N900. The error tells me that the libssl is out of date, but libssl doesn't seem to be in a maemo repo. Could anyone tell me how I can install libssl? </pre> aidy lewis 2012-12-22T12:18:40 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17374 <pre>Hello, I needed to connect to WiFi WPA2 network which using EAP/TTLS+GTC authentification. Maemo5 has for these settings chechboxes in Control Panel, but it does not remember password for TTLS+GTC authentification. It is really annoing that user must enter password every time. I found which Maemo application is responsible for EAP authentification. It is daemon /usr/bin/eapd which is in Nokia non-free proprietary package osso-wlan-security. So fixing this bug is not possible :-( But I found string "EAP_GTC_passcode" in that daemon, so it should read password from some configuration. I stored wifi GTC password to gconf and it worked. So problem is that Maemo Control Panel Connections GUI does not have password field for TTLS+GTC authentification and eapd daemon does not store password automatically. *Here is manual solution how to store password for EAP/TTLS+GTC* 1. Find gconf dir for wifi network: This shell script will print all wifi networks with gconf dir: for line in `gconftool --all-dirs /system/osso/connectivity/IAP`; do gconftool -g $line/name; echo $line; echo; done 2. Set/Change password for wifi network specified by gconf dir: replace &lt;dir&gt; with gconf dir from step 1 and &lt;password&gt; for real gconftool -s '&lt;dir&gt;/EAP_GTC_passcode' -t string '&lt;password&gt;' </pre> Pali Rohár 2012-12-01T12:23:28 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17373 <pre>Hello everybody, excuse me for repost from here: http://maemo.org/community/maemo-users/double_screen/ but maybe someone here not reading forum. I'm having a problem with my N800, it starts appearing two screens folding one on another, second screen is about 15 pixels lower than the first. While there are two visual screens, touchscreen is working only on one, the first one. process list of just started system is here: http://pastebin.com/8tYvVHiK see pictures here: http://imgur.com/a/FFUzb#0 Also, note that these two screens appears right after system starts and remains till system shutdown (see horizontal line on starting and ending screens). And there are two xterms in process list, as if it's not just second view of system screen, but indeed two separate processes which starts two subprocesses. So, what is this and how do i remove second screen? I have latest OS for this tablet and i didn't install anything that could lead to such problem, it starts without a reason. </pre> Alexander Lunev 2012-11-24T18:08:02 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17369 <pre>Dear Maemo fellows, I am trying to use my N900 like an USB host. i bought an A-A USB connector so I could plug in devices using my Nokia USB cable. I installed h-e-n, the USB host mode enabler. I played around with it but every device connection ended up in a kernel driver segfault (reported by dmesg). Any clues what am I doing wrong? Thanks in advance for your future responses. </pre> Pavel Řezníček 2012-11-16T08:39:39 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17365 <pre>Interestingly N900 seems to have slip kernel module and commands like slattach to create a SLIP interface. Is this usable to create a USB network with other end being a SLIP interface. (In my case the other end is a NetBSD host.) Which tty device to use as argument to slattach? If I use ttyS* I get input/output error. Mayuresh. </pre> Mayuresh 2012-10-07T06:13:24 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17364 <pre>Hello, I am wondering if azimuth http://blog.desmottes.be/post/2010/04/25/Introducing-Azimuth-for-Maemo is only for me not working anymore or if it is broken for some reason (maybe the jabber.org server was upgraded, etc.) ? Is anybody using another service instead for location publishing? Thanks, Rainer </pre> Rainer Dorsch 2012-09-30T17:41:25 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17361 <pre>Some might be interrested in this blog entry I came across some time ago: http://rachelbythebay.com/w/2012/07/27/770/ I found it interresting because this is the opinion of a geek who's not involved in any way with any part of the product. She was right in the middle of the customer target. Yet, she did not liked the product because it was too slow (and troubles to get bluetooth to work). </pre> rixed< at >happyleptic.org 2012-09-17T07:44:55 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17360 <pre>I can't get syncing of contacts with gmail to work, neither with mail for exchange nor using the syncevolution client (https://m.google.com/syncml is 404). Is it still possible to sync the n900's contact database against gmail? </pre> Philipp Haselwarter 2012-09-11T22:34:27 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17359 <pre>Ciao a tutti, From some days I have a malfunction for osso-addressbook: a message in the desktop appears continously saying errore interno: Applicazione "Rubrica" chiusa (internal error: application "Addressbook" closed) and trying to run osso-addressbook from the terminal give this error: ~ $ osso-addressbook Init: 0x418f9330 ** ERROR:menu-extension.c:135:override_visible_func_idle_cb: assertion failed: (view != NULL) Aborted I have CSSU unstable. What could I do? </pre> Leandro Noferini 2012-09-10T21:29:25 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17357 <pre>I have a Nokia E71 phone, an N810 and a laptop running Fedora Core 9. The laptop has Bluetooth, also a USB cable to connect to the E71. If I have a good signal, I can use the packet data interface on the phone itself, or on the N810 via Bluetooth to get an Internet connection. But the laptop does not always work. Close to a tower, if I use the cable and select 'PC Suite' mode on the phone, the Gnome network app shows a wireless connection and syslog talks about ttyACM0 and activating my connection. Further away from a tower, the connection does not show in the app and syslog says 'ignoring due to lack of mobile broadband capability' I had naively thought the two devices used the same capability on the phone. Does anyone know what the problem is, and if it's possible to get a connection on the laptop at greater distance ? </pre> Andrew Daviel 2012-08-22T22:47:27 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17354 <pre>Ciao a tutti, today I found that my phone applications does not show any past calls: what could I look at to solve this issue? </pre> Leandro Noferini 2012-08-19T06:44:09 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17346 <pre>Ciao a tutti, I have a trouble with automatic upgrade: when it shows me the presence of upgrades and I try to install them I got always the message saying there is no sufficient space to install them. Instead if I try to install them with aptitude safe-upgrade it works normally. Where is the space lacking? </pre> Leandro Noferini 2012-08-11T21:56:05 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17345 <pre>Ciao a tutti, I have a problem with aptitude: if I try to use it "normally" in full screen mode it segfaults always. Instead it works fine if I use it with command-line options, like aptitude safe-upgrade and so on. What would I do? </pre> Leandro Noferini 2012-08-11T21:50:40 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17311 <pre>Dear comaemoers, I have recently read an article, a review of Nokia N900. The reviewer stated that his device lasts 3 days on battery when only sometimes calling or writing SMS. This is what I hardly can believe because my N900 lasts only 3, max. 6 hours on battery and then the battery gets discharged. Was the reviewer kidding or is something wrong with my mobile computer? I have recently bought a new battery and the effect is minimal. My device was in repair service already and they changed the motherboard. It helped a bit but I never made it to that 3 days on battery. Any ideas? :-) -- Pavel Řezníček vývojář a správce sítě Farní sbor Českobratrské církve evangelické – Korandův sbor Anglické nábřeží 13 301 50 Plzeň Odesláno z mého telefonu Nokia N900 s linuxovým operačním systémem Maemo 5 Fremantle. </pre> Pavel Řezníček 2012-08-05T08:52:29 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17302 <pre>Modrana was never really usable for me. A few days ago I decided to try it out again because it looks promising and I was hoping that with updated versions it will become useful. I let Modrana download more than 95000 tiles (for about 12 hours) and it just shows now map except on zoom level 1 (or 0?). When running it from the commandline I see this: mapTiles: exception while drawing the map layer: float division Traceback (most recent call last): File "/opt/modrana/modules/mod_mapTiles.py", line 498, in drawMap cx1,cy1 = (sw*(cx-px1)/pdx,sh*(cy-py1)/pdy) #this is basically the pxpy2xy function from mod_projection inlined ZeroDivisionError: float division Shutting-down modules Does anyone have success with Modrana on the N900? Regards Johann </pre> Johann Spies 2012-06-08T09:14:24 http://comments.gmane.org/gmane.comp.handhelds.maemo.user/17298 <pre>Hi, list It's my first post on the list, please pardon for my poor English ;p I'm using vim on maemo and like it, some inconvenients exist: 1. version for maemo is too old, the latest version of vim contains many important features and updates. 2. version for maemo doesn't have feature 'autochdir'. Please update it to the latest version. Thank you. </pre> Yue Wu 2012-05-28T00:47:50 Search the mailing list at Gmane query http://search.gmane.org/?group=$group=gmane.comp.handhelds.maemo.user