gmane.linux.ubuntu.devel.kernel.general

[Quantal] linux kernel 3.4.0-3.8 uploaded

Leann Ogasawara — 2012-05-26T01:36:56

We have uploaded a new Quantal linux kernel.  The most notable changes 
are as follows:

  * Updated AppArmor patch set (LP:978038, LP:987371, LP:955892)
  * Build in CONFIG_XEN_ACPI_PROCESSOR=y
  * Enable CONFIG_NET_DSA=m (LP:1004148)
  *   dell-laptop: rfkill blacklist Dell XPS 13z, 15 (LP:901410)
  * async_populate_rootfs: fix build warnings (LP:1003417)
  * Include include/generated/compile.h (LP:942569)
  * Fix up postinst to ensure we know which error is which (LP: 1002388)


The full changelog can be seen at:

https://launchpad.net/ubuntu/+source/linux/3.4.0-3.8

Thanks,
Leann

[lucid] linux-ec2 2.6.32-345.49 uploaded

Luis Henriques — 2012-05-25T19:49:32

A new lucid kernel has been uploaded into proposed. 
The full changelog about all bug fixes contained in this upload can be found at:

https://launchpad.net/ubuntu/lucid/+source/linux-ec2/2.6.32-345.49

-Luis

[lucid] linux 2.6.32-41.90 uploaded

Luis Henriques — 2012-05-25T19:48:40

A new lucid kernel has been uploaded into proposed. 
The full changelog about all bug fixes contained in this upload can be found at:

https://launchpad.net/ubuntu/lucid/+source/linux/2.6.32-41.90

-Luis

[lucid] linux-lts-backport-natty 2.6.38-15.60~lucid1 uploaded

Luis Henriques — 2012-05-25T19:46:56

A new lucid kernel has been uploaded into proposed. 
The full changelog about all bug fixes contained in this upload can be found at:

https://launchpad.net/ubuntu/lucid/+source/linux-lts-backport-natty/2.6.38-15.60~lucid1

-Luis

[natty] linux 2.6.38-15.60 uploaded

Luis Henriques — 2012-05-25T19:45:07

A new natty kernel has been uploaded into proposed. 
The full changelog about all bug fixes contained in this upload can be found at:

https://launchpad.net/ubuntu/natty/+source/linux/2.6.38-15.60

-Luis

[precise] linux 3.2.0-25.40 uploaded (ABI bump)

Luis Henriques — 2012-05-25T19:43:50

A new precise kernel has been uploaded into proposed. Note the ABI bump. 
The full changelog about all bug fixes contained in this upload can be found at:

https://launchpad.net/ubuntu/precise/+source/linux/3.2.0-25.40

-Luis

APPLIED: [PATCH 0/1] LP#1002388 -- postinst symlink failures

Tim Gardner — 2012-05-25T17:58:07

ACK: [PATCH 1/1] UBUNTU: [Config] fix up postinst to ensure we knowwhich error is which

Brad Figg — 2012-05-25T17:34:43

ACK: [PATCH 1/1] UBUNTU: [Config] fix up postinst to ensure we knowwhich error is which

Tim Gardner — 2012-05-25T16:44:35

[PATCH 0/1] LP#1002388 -- postinst symlink failures

Andy Whitcroft — 2012-05-25T16:34:27

We have been seeing a number of postinst failures related to symlinks
not being handled correctly.  Sadly the postinst has the same messages in
multiple places so it is hard to even know which bits are being exercised.
Fix up all the errors so that they report their line number in the output
to make this more diagnosable.  Note this is _not_ a fix for the issue
mearly debug to try and help find the issue.

Proposing for SRU to precise.

-apw

Andy Whitcroft (1):
  UBUNTU: [Config] fix up postinst to ensure we know which error is
    which

 debian/control-scripts/postinst |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

[PATCH 1/1] UBUNTU: [Config] fix up postinst to ensure we know whicherror is which

Andy Whitcroft — 2012-05-25T16:34:28

We are seeing cases of errors from the postinst saying "Failed to
symbolic-link", but there are more than one of these in the script.
Convert all of these errors to errors without newline which will trigger
perl to add "at FILE line line NN.".  Also be consistant about format
and spaceing for error string ($!) printing.

BugLink: http://bugs.launchpad.net/bugs/1002388
Signed-off-by: Andy Whitcroft <apw< at >canonical.com>
---
 debian/control-scripts/postinst |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/debian/control-scripts/postinst b/debian/control-scripts/postinst
index ce5ae56..b6ed9f8 100644
--- a/debian/control-scripts/postinst
+++ b/debian/control-scripts/postinst
< at >< at > -332,7 +332,7 < at >< at > sub really_move_image {
                    " $target");
   if ($ret) {
     die("Failed to move " . $src_dir . "$target to "
-        . $dest_dir . "$target.\n");
+        . $dest_dir . "$target");
   }
   # Ok, now we may clobber the previous .old files
   if (-e "$target.$

Re: APPLIED: [Quantal] Built-in xen-acpi-processor

Stefan Bader — 2012-05-25T15:49:48

Doh! Yeah, should have done that... :/

APPLIED: [Quantal] Built-in xen-acpi-processor

Tim Gardner — 2012-05-25T15:45:04

I also jammed in a bit of patch that removes xen-acpi-processor from the
ABI files so we don't get a module check build failure.

rtg

Re: namespace attach (setns) patches

Bryan Wu — 2012-05-25T15:09:57

On Sat, May 19, 2012 at 3:44 AM, Serge Hallyn
<serge.hallyn< at >canonical.com> wrote:

Right, I saw Eric's patches were pulled by Linus during this merge
window. IIRC, it's from here:
http://git.kernel.org/?p=linux/kernel/git/ebiederm/user-namespace.git;a=shortlog
Totally 46 patches.


Where is these remaining setns patches?


Nice, do you know where are these patches hosted? any git tree for pulling?


Exactly, these pid namespace patches look like quite old now. Probably
we should wait for Eric's new set.


If there is no git, please forward. Thanks.

Serge, my plan to setup lxc as test environment for our further
kernel, which should include Eric's or others' user namespace patches.
I tried your lxctest on my OMAP4 Panda board. I think some testing
failed, please find my log here: http://pastebin.ubuntu.com/1006351/

I really appreciate you can help to take a look at this.

Thanks a lot,

[Quantal] Built-in xen-acpi-processor

Stefan Bader — 2012-05-25T14:26:30

That probably needs some change somewhere to make it the
policy...

-Stefan

From 5b39c30d1f30b8874932f60747753057b2a3ca1e Mon Sep 17 00:00:00 2001
From: Stefan Bader <stefan.bader< at >canonical.com>
Date: Fri, 25 May 2012 16:22:28 +0200
Subject: [PATCH] UBUNTU: (config) Built-in xen-acpi-processor

The driver only activates when the kernel is run as dom0 and it
is non-autoloading.

Signed-off-by: Stefan Bader <stefan.bader< at >canonical.com>
---
 debian.master/config/config.common.ubuntu |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/debian.master/config/config.common.ubuntu b/debian.master/config/config.common.ubuntu
index 84f16c2..a52ea48 100644
--- a/debian.master/config/config.common.ubuntu
+++ b/debian.master/config/config.common.ubuntu
< at >< at > -6368,7 +6368,7 < at >< at > CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_XADD=y
 CONFIG_XEN=y
 CONFIG_XENFS=m
-CONFIG_XEN_ACPI_PROCESSOR=m
+CONFIG_XEN_ACPI_PROCESSOR=y
 CONFIG_XEN_BACKEND=y
 CONFIG_XEN_BALLOON=y
 CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y

APPLIED: [precise] SRU: UBUNTU: SAUCE: dell-laptop: rfkill blacklistDell XPS 13z, 15

Tim Gardner — 2012-05-25T12:19:49

APPLIED: [PATCH 01/12] dsa: Change dsa_uses_{dsa, trailer}_tags()into inline functions

Tim Gardner — 2012-05-25T12:07:58

PPA Kernel install and module compile error

Daniele Elia — 2012-05-24T17:48:02

Hi all,
I need to install kernel 3.3 or 3.4 because the default kernel in use by
ubuntu 12.04 doesn't work very well in my laptop; I've a big problem about
headphone jack; if I put the jack in, speaker and headphone sound both.

I've tried kernel 3.3.7 from mainline ppa, I've installed generic headers,
all headers and image (i386) and my headphone now work correctly but I
cant't compile nvidia module or virtualbox module or vmware module, always
it's end with kernel Ops (crash) ... I don't know why, I've tried also 3.4
or 3.3.6 and 3.3.5 and always in modprobe it finish with ops.

Am I missing something ?

Thank's

Daniele

RE: [PATCH] UBUNTU: [Upstream] ahci: Detect Marvell 88SE9172 SATAcontroller

Johnson, Matthew Robert — 2012-05-24T22:25:01

Sorry, I didn't file a bug, I originally just submitted the patch to
the mailing list at the same time I submitted it upstream.  The patch
has been upstreamed and will be in 3.4.  I didn't 'Cc: stable' when I
upstreamed the patch, so I took care of that last night.  The patch
is queued for the next 3.0 and 3.3 stable releases[1][2], and 3.2 should
be forthcoming.

If I understand correctly, the patch will automatically trickle down to the
12.04 kernel once 3.2.19 is released?  In that case, feel free to either
apply the patch now or wait until then.  I can also file a bug if necessary.

Thanks,
Matt

[1] http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git;a=commitdiff;h=e90c706efb694972f64409d25d09076ab7581f34
[2] http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git;a=commitdiff;h=898f26e7f5b166847e3157ceb7907580e2035e80

Re: Precise SRU, [PATCH 0/12] CONFIG_DSA=m, 12 patches

Herton Ronaldo Krzesinski — 2012-05-25T02:45:41

Seems there were a lot of shuffling in configs because of highbank where
CONFIG_PHYLIB turned to m. Perhaps it could be turned to y (if possible
and makes sense) as well to avoid other configs growing, but that is
just an observation. Ack on the patches.

Re: [PATCH] UBUNTU: [Upstream] ahci: Detect Marvell 88SE9172 SATAcontroller

Tim Gardner — 2012-05-25T01:47:42

Waiting until this patch trickles down via stable is just fine. Thanks 
for the follow up.

rtg