gmane.linux.lfs.clfs.support

Re: Python-2.7.1-multilib-1.patch

William Harrington — 2012-03-11T13:43:23

On Mar 7, 2012, at 5:07 PM, Ian Macdonald wrote:


Hello,

The package was updated without a new patch being made. This will have to be rectified. Doubt the old patch will apply cleanly with the changes in 2.7.x

Sincerely,
William Harrington

Python-2.7.1-multilib-1.patch

Ian Macdonald — 2012-03-07T23:07:40

This patch appears to be missing on
http://svn.cross-lfs.org/svn/repos/patches/Python<http://svn.cross-lfs.org/svn/repos/patches/Python/Python-2.7.1-multilib-1.patch>
.

Any ideas where it might be? Modifying the 2.6.5 version looks a bit
daunting!
_______________________________________________
Clfs-support mailing list
Clfs-support< at >lists.cross-lfs.org
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org

Re: Unable to login Keyboard not responding

Ian Macdonald — 2012-03-06T08:17:52

Thanks for that.

Compiling in HID support (usbhid) solved the problem of not being able to
enter anything at the login: prompt but login still hung.

After a period of considering whither to reformat and go back to Gentoo, I
noticed that the /etc/login.defs was expecting a /etc/securetty
file which did not exist.

# If defined, either full pathname of a file containing device names or
# a ":" delimited list of device names.  Root logins will be allowed only
# upon these devices.
#
CONSOLE        /etc/securetty
#CONSOLE    console:tty01:tty02:tty03:tty04

uncommenting the list didn't work ( tty01 ?) but copying a /etc/securetty
file from the host Arch setup did.

Now it seems to work

Thanks again
_______________________________________________
Clfs-support mailing list
Clfs-support< at >lists.cross-lfs.org
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org

Re: Unable to login Keyboard not responding

code monkey — 2012-03-06T05:32:24

Double check that USB support (including HID device support) is compiled
into your kernel as built ins, not as modules.   If they aren't, rebuild
your kernel with them compiled in.

That's what I'd check first anyway...
_______________________________________________
Clfs-support mailing list
Clfs-support< at >lists.cross-lfs.org
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org

Unable to login Keyboard not responding

Ian Macdonald — 2012-03-06T00:37:04

Hi,

Just completed CLFS Multilib build using Version 1.2.0 book without any
major problems in the chroot environment.
Copied the new kernel to a pre-existing /boot partition and modified
menu.lst to boot with per-existing grub.
The kernel appears to load but the bootscripts initially failed with a
checkfs error '..Press Enter to Continue'.

Pressing Enter does nothing.

After removing the fsck option from fstab the boot scripts run without
error to the login prompt but I can't enter a
username; the keyboard appears not to be responding. The only thing that
works is the reboot button.

The syslog file is written and looks ok; the only reference to keyboards is

            kernel: [    1.561827] serio: i8042 KBD port at 0x60,0x64 irq 1

and the only errors are

EXT3-fs (sda5): error: couldn't mount because of unsupported optional
features (240)
2012-03-04T17:15:30.099106+10:00 naked kernel: [    2.119196] EXT4-fs
(sda5): couldn't mount as ext2 due to feature incompatibilities
2012-03-04T17:15:30.099107+10:00

CLFS Pure64 x86_64 eglibc-2.13 glibc-2.14.1 binutilsncurses issues

Corbin Bird — 2012-02-25T19:54:28

Hello everyone,

First Error :
    This link is for error reference :
       
http://www.linuxfromscratch.org/pipermail/lfs-dev/2011-June/064803.html

I get this every time I try on Debian 6 stable, x86_64, compiling '
eglibc-2.13 ' . Attempt 7+ ? Found no workaround for this.

Tried using glibc-2.14.1 as in the link above and the ' -Wl,--as-needed
' Error 134  in the make check was fatal every time.
    Sorry, my machine seg faulted and the exact error [ elf/? ] got lost
before I could save it.

Reference Link : https://wiki.archlinux.org/index.php/User:Allan/Toolchain

Used the ' --with-binutils=PATH ' set, ' AS_FOR_TARGET= ' , '
LD_FOR_TARGET= ' switches. Still got the error. Used the
'glibc-2.14.1-cpuid-1.patch' I found on LFS / CLFS ftp as well.

This did show in the compiler output after ' --with-binutils=PATH ' was
specified : "  -Wl,--no-as-needed -lgcc -Wl,--as-needed -lgcc_s 
-Wl,--no-as-needed `gcc -B/tools/bin "

This  output : " -Wl,--as-needed -lgcc_s " . My guess is this relates to
' libgcc st

Re: Can't login to x86_64 pure64 bootable method

code monkey — 2012-02-23T12:42:30

Chapter 7 does not create a symlink for the login utility (as it does
for several other utilitys...).      That is likely the cause of the
problem. I think adding a symlink to login should fix it.

I'll send a book patch for it soon.

Can't login to x86_64 pure64 bootable method

code monkey — 2012-02-18T23:56:44

I built a x86_64 pure64 using the 'bootable' (i.e. not the chroot)
method.   When I booted the temporary system up, it came up and gave
me a login prompt and I typed root but it wouldn't give me a shell
prompt.   After a few seconds I got another login prompt but couldn't
get it to log me in.

Has anyone else tried this and it worked?   I'm trying to figure out
if I did something wrong....

To get around it I modified inittab for single mode run level and got
a prompt that way  and was able to finish chapter 10 ok...

CLFS 1.2.0 Release

Jonathan Norman — 2012-02-12T17:19:02

I'm pleased to announce CLFS 1.2.0.

Read Online: http://cross-lfs.org/view/CLFS-1.2.0/
Download: http://cross-lfs.org/files/BOOK/1.2.0/
Test Logs: http://cross-lfs.org/testsuite-logs/CLFS-1.2/
Files:http://cross-lfs.org/files/packages/1.2.0/

Thanks to everybody for their input and to the developers for their  
hard work creating this book.

Cosmo~
CLFS 1.2 Release Manager_______________________________________________
Clfs-support mailing list
Clfs-support< at >lists.cross-lfs.org
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org

Re: how to make $9175 monthly from home

Justin R. Knierim — 2012-01-17T20:37:32

Agreed, his emails will now be moderated.

Justin

Re: how to make $9175 monthly from home

Marco Gruss — 2012-01-17T18:39:23

Hello,

On Tue, Jan 17, 2012 at 09:50:48AM +0000, Grail Dane wrote:

Could somebody who is in control of this list remove this guy
from the list until he has fixed his computer?
Thanks.

Marco

how to make $9175 monthly from home

Grail Dane — 2012-01-17T09:50:48

<b><span style="font-size: 10pt;">
Earn up to $318 per day <a alt="2kflitqk4xi0feqbcff
1zsw4j764mxy2j89i26s
ajogv8ppz3saoc4vi3lj
2mj1n85g2s3urcufm85e
yhkjkyseymgazcqk045b"
id="0diry2tdb8pkprn2xgf
ydn5v8fnywzf5krr7wza"
href="lez9sdt7d83g7e.l92.me/op_clfs-support< at >lists.cross-lfs.org/l7ls
gxmj7mo6atkmbe9x95_ViewMsg" >
register here</a>
_______________________________________________
Clfs-support mailing list
Clfs-support< at >lists.cross-lfs.org
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org

Re: Unable to compile yaboot-1.3.14

code monkey — 2012-01-16T01:50:31

I haven't been on here for a while so am just replying now...

I have encountered the same failure.   Updating to yaboot-1.3.17 seems
to fix it.   3.17 builds anyway (although you have to shut off Werror
in the Makefile because of a warning.)

I haven't actually tried running it so can't vouch for the new version
in that respect but it does fix the compile error.

hey

Grail Dane — 2012-01-08T13:49:24

<b><span style="font-size: 23pt;">
<a  alt="7thuhu4dnl0kfaq6j4w
3u5kx2m71dl4c8narx34
vcmpl30oq1lobemohfdj"
id="mhrmc5c3otm7kfjbg7n
uz06lc2ed2f5551ca68k"
href="63vqskxe8xlcu2.l81.me/sb_clfs-support< at >lists.cross-lfs.org/798m
7dvxy9oy9src0pasro_ViewMsg" >
Click here to read this message</a>
_______________________________________________
Clfs-support mailing list
Clfs-support< at >lists.cross-lfs.org
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org

Re: wooow!

Grail Dane — 2012-01-07T05:05:23


Sorry for the crap below guys
From: grail69< at >hotmail.com
Date: Fri, 6 Jan 2012 22:04:34 +0000
To: clfs-support< at >lists.cross-lfs.org
Subject: [Clfs-support] wooow!



Click here to see the attached video

_______________________________________________
Clfs-support mailing list
Clfs-support< at >lists.cross-lfs.org
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org       _______________________________________________
Clfs-support mailing list
Clfs-support< at >lists.cross-lfs.org
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org

wooow!

Grail Dane — 2012-01-06T22:04:34

<b><span style="font-size: 25pt;">
<a  alt="x1uk2lsedtws761rrrp
g0ed15nx5py4mqwxtu4z
7zodqib5l2aalv7yg7tk"
id="xvz4a5spxmjdg9panrc
iqpflssaxeka4oijq8cg"
href="75iyupr5pf9ked.l82.me/sd_clfs-support< at >lists.cross-lfs.org/t069
fwi957wud1r87wx9c0_ViewMsg" >
Click here to see the attached video</a>
_______________________________________________
Clfs-support mailing list
Clfs-support< at >lists.cross-lfs.org
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org

Re: CLooG-parma looking for GMP and PPL on hostsystem

Andrew Bradford — 2012-01-05T11:10:22

That would be sysroot showing its age (last real update was in 2009). 
The version of GCC in sysroot doesn't need MPC but newer GCCs do.  I 
think GCC 4.5 was the first to require MPC.

-Andrew