gmane.linux.drivers.dvb

The mailing list linux-dvb< at >linuxtv is closed. use linux-media< at >vger.kernel.org instead

Mauro Carvalho Chehab — 2011-06-03T13:26:55

Dear linux-dvb users,

A long time ago, we've merged analog and digital ML's into just one list.
As result, a new mailing list were created, at kernel.org facilities, meant
to be used by those envolved on adding open source support on Linux for
all sorts of radio, analog TV, digital TV and webcam support. The traffic
at the video4linux and linux-dvb ML's were gradually moved to the new ML.

However, still today, people sometimes send useful messages to this ML, believing
that the list is still active. However, no developers are reading from this ML
anymore, and any comments send to this ML will probably be just not read.
The same were happening with video4linux ML.

To avoid frustating people that are sending messages to this ML, I'm removing all
subscribed users from this ML, and blocking and further subscriptions.

If you're interested on Linux DVB, please use linux-media< at >vger.kernel.org. 

To subscribe, all you need to do is to send a message to: majordomo< at >vger.kernel.org
with "subscribe linux-media" at t

Re: XC4000: added card_type

Devin Heitmueller — 2011-06-03T12:46:46

Hi Istan,

I understand what you're trying to do here, but this is not a good
approach.  We do not want to be littering tuner drivers with
card-specific if() statements.  Also, this is inconsistent with the
way all other tuner drivers work.

The approach you are attempting may seem easier at first, but it gets
very difficult to manage over time as the number of boards that use
the driver increases.

You should have the bridge driver be setting up the cfg structure and
passing it to the xc4000 driver, just like the xc5000 and xc3028 do.

Devin

Re: status of BaluTV / Digitelmo1 / Moditel1 driver? Joachim Steiger

Johannes Wünsche — 2011-05-31T09:22:57

searching Joachim Steiger because




  Want to use driver balutv_cs for moditel 1 it is 2011 and i think the
  driver now maybe done. but i don´t find the Driver od the man where made
  this driver. So please help me to contact this man. because i know he
  was in your system. but i´m german and i don`t understand your mail
  system

status of BaluTV / Digitelmo1 / Moditel1 driver?

Johannes Wünsche — 2011-05-31T09:21:08

Want to use driver balutv_cs for moditel 1 it is 2011 and i think the  
driver now maybe done. but i don´t find the Driver od the man where made  
this driver. So please help me to contact this man. because i know he was  
in your system. but i´m german and i don`t understand your mail system

Re: linux-dvb Digest, Vol 76, Issue 10

Dongjin Kim — 2011-05-29T07:05:44

  93 936
2011. 5. 28. 오후 7:00에 <linux-dvb-request< at >linuxtv.org>님이 작성:
got
network. I
Nederland

to
Terratec
that I

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media< at >vger.kernel.org
linux-dvb< at >linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Terratec Cinergy C HD - CAM support.... Need help?

Willem van Asperen — 2011-05-27T19:48:04

Hi All,

I need something but willing to help out!

I just got my Terratec Cinergy C HD card. After relatively minor issues I got 
the card running on my Mandriva 2010.2 (kernel 2.6.33) myth box.

But... I am getting my DVB-C signal from the Ziggo (former Casema) network. I 
found a post that claims that all channels are encrypted (except for Nederland 
1). Even though these are the standard channels that you also get when you 
just have an analog subscription.

So. I need CAM support. After a couple of nights swimming the net I come to 
the conclusion that

a) CAM support is currently not implemented
b) This support has been not implemented for quite some time
c) There are more people that would like it to work...

So, dear people, is anyone working on getting the CAM to work on the Terratec 
Cinergy C HD card, but having problems? Is there any way, shape or form that I 
can assist in getting this support done?

Or have we given up on this card and should I just take my loss and go for 
another card... If s

Re: build.sh fails on kernel 2.6.38

Nicholas Leahy — 2011-05-25T02:47:45

I had the same problems as well on ubuntu with kernel 2.6.38.8
       _______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media< at >vger.kernel.org
linux-dvb< at >linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: build.sh fails on kernel 2.6.38

Stu Fleming — 2011-05-24T11:55:18

I also see, compiling against 2.6.38:
   CC [M]  /usr/src/v4l-dvb/v4l/flexcop-i2c.o
/usr/src/v4l-dvb/v4l/flexcop-i2c.c: In function 'flexcop_i2c_init':
/usr/src/v4l-dvb/v4l/flexcop-i2c.c:253:39: error: 'I2C_CLASS_TV_DIGITAL' 
undeclared (first use in this function)
https://patchwork.kernel.org/patch/250451/ refers

   CC [M]  /usr/src/v4l-dvb/v4l/bttv-i2c.o
/usr/src/v4l-dvb/v4l/bttv-i2c.c: In function 'init_bttv_i2c_ir':
/usr/src/v4l-dvb/v4l/bttv-i2c.c:437:3: error: too few arguments to 
function 'i2c_new_probed_device'
http://www.gossamer-threads.com/lists/linux/kernel/1282040 refers

and finally
   CC [M]  /usr/src/v4l-dvb/v4l/dmxdev.o
/usr/src/v4l-dvb/v4l/dmxdev.c: In function 'dvb_dmxdev_start_feed':
/usr/src/v4l-dvb/v4l/dmxdev.c:583:13: warning: comparison between 'enum 
dmx_ts_pes' and 'enum <anonymous>'
/usr/src/v4l-dvb/v4l/dmxdev.c: At top level:
/usr/src/v4l-dvb/v4l/dmxdev.c:1142:2: error: unknown field 'ioctl' 
specified in initializer
/usr/src/v4l-dvb/v4l/dmxdev.c:1142:2: warning: initialization f

build.sh fails on kernel 2.6.38

Giwrgos Panou — 2011-05-23T10:09:43

Hello,
I tried to build the v4l-dvb on an ubuntu machine with kernel 2.6.38.8 generic
and I get make error:
=========================================
/home/z/media_build/v4l/kinect.c:38:19: error: ‘D_ERR’ undeclared here (not in a function)
/home/z/media_build/v4l/kinect.c:38:27: error: ‘D_PROBE’ undeclared here (not in a function)
/home/z/media_build/v4l/kinect.c:38:37: error: ‘D_CONF’ undeclared here (not in a function)
/home/z/media_build/v4l/kinect.c:38:46: error: ‘D_STREAM’ undeclared here (not in a function)
/home/z/media_build/v4l/kinect.c:38:57: error: ‘D_FRAM’ undeclared here (not in a function)
/home/z/media_build/v4l/kinect.c:38:66: error: ‘D_PACK’ undeclared here (not in a function)
/home/z/media_build/v4l/kinect.c:39:2: error: ‘D_USBI’ undeclared here (not in a function)
/home//media_build/v4l/kinect.c:39:11: error: ‘D_USBO’ undeclared here (not in a function)
/home//media_build/v4l/kinect.c:39:20: error: ‘D_V4L2′ undeclared here (not in a function)
make[3]: *

Re: AverMedia A306 (cx23385, xc3028, af9013) (A577 too ?)

Nicholas Leahy — 2011-05-20T06:20:46

Hi Wallak 
How do you see the chips on the I2C bus? I have been trying to get a DiVCO card to work (it uses the same CX23885) 
I dont get the following parts
CX23885_BOARD_AVERMEDIA_A306:> + // ?? PIO0: 1:on 0:nothing work> + // ?? PIO1: demodulator address 1: 0x1c, 0:0x1d ??> + // ?? PIO2: tuner reset ?> + // ?? PIO3: demodulator reset ?> + printk(KERN_INFO "gpio...\n");


and GPIO stuff



Cheers Nick
 

       _______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media< at >vger.kernel.org
linux-dvb< at >linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

AverMedia A306 (cx23385, xc3028, af9013) (A577 too ?)

2011-05-19T20:48:48

Hello All,

I've tried to use my A306 board on my system. All the main chips are fully
supported by linux.

At this stage the CX23385 and the tuner: xc3028 seem to respond properly. But
the DVB-T chip (af9013) is silent. Nevertheless both chips are visible on the
I2C bus.

I've no full datasheet of theses chips. with exception of the af9013 where this
information is available:
http://wenku.baidu.com/view/42240f72f242336c1eb95e08.html

At this stage the CLK signal of the DVB-T chip may be missing or something is
wrong elsewhere.

If you have the datasheets... Any help will be appreciated.


Best Regards,
Wallak.




diff -u -r -b -B -w -x '*.o' -x '*.cmd' -x '*.ko' -x '*.mod.c' -x 'modules.*'
tmp/linux-2.6.37.6/drivers/media/common/tuners/tuner-xc2028.c
linux-2.6.37.6-mdf/drivers/media/common/tuners/tuner-xc2028.c
--- linux-2.6.37.6/drivers/media/common/tuners/tuner-xc2028.c2011-03-27
21:01:41.000000000 +0200
+++ linux-2.6.37.6-mdf/drivers/media/common/tuners/tuner-xc2028.c2011-05-07
23:30:20.000000000 +020

Re: Technisat Cablestar HD2 not automatically detected by kernel > 2.6.33?

Arie van Dobben — 2011-05-19T09:12:37

In reply to Jos Hoekstra's Questions about the wiki:

As far as I know the wiki is still active and I think the last edit on that
card is done by me.

Please feel free to alter the information on the wiki to reflect your
success story.

I still have the card, however I never mangaged to get it working correctly.
Then (about a year ago) I decided to wait until kernel  2.6.33 would be
available, which is now.

Time to go back to it again, because I read from your message that it works
flawless in your configuration.

As a side note: Jos, I read from your name that you are Dutch, do you have
to use the CI interface in order to get all channels, or are you only
viewing FTA?
I have Caiway as provider and I was wondering if I could view all channels
if I get my system working.
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media< at >vger.kernel.org
linux-dvb< at >linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

New initial scanning data for Denmark:Aarhus_Antenneforening

Darren Black — 2011-05-14T17:00:50

Could somebody add this to the set of scan's initial scanning files? I'm
guessing the name of the file should be something along the lines of
dk-Aarhus-AarhusAntenneforening.

# freq sr fec mod
C 346000000 6900000 AUTO QAM64

Cheers
/Darren
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media< at >vger.kernel.org
linux-dvb< at >linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: TeVii S470 (cx23885 / ds3000) makes the machineunstable

Andrew Junev — 2011-05-05T21:00:09

Thursday, May 5, 2011, 11:56:07 PM, you wrote:








Hello Josu,

Thanks a lot for your response!

What kernel version do you have?
Do  you  see  your  card's  MAC  address in the /var/log/messages when
the    driver   is  loading?  I'm not sure if it matters, but I see my
old  TT S-1401 cards' MAC addresses in the logs, but I don't see the
MAC of S470 anywhere... Maybe it just a specific of the driver...


As Igor wrote earlier, I probably need to upgrade my kernel. Well, I'm
not   really   looking  forward  to   do  that,  since it is likely to
break  other things  for me. But if that's the only way - I guess I'll
have to give it a try.

Thanks again!


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media< at >vger.kernel.org
linux-dvb< at >linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

TeVii S470 (cx23885 / ds3000) makes the machine unstable

Andrew Junev — 2011-05-05T17:38:06

Hello All,

  I'm  trying  to set up a TeVii S470 DVB-S2 card for use in my MythTV
  system  running  on  Fedora 13. I already have a couple of TT S-1401
  cards in that machine, and it works fine.

  I  copied   the  firmware for my S470 as described on the Wiki page.
  The  card is detected  and seem to work. I am able to watch existing
  channels, and even found some DVB-S2 transponders.

  But  the  machine  is  very  unstable. After a while, I get a lot of
  errors in my /var/log/messages , like:

May  3 22:35:51 localhost kernel: ds3000_readreg: reg=0xd(error=-5)
May  3 22:35:51 localhost kernel: ds3000_readreg: reg=0xb2(error=-5)
May  3 22:35:51 localhost kernel: ds3000_writereg: writereg error(err == -5, reg == 0x03, value == 0x11)
May  3 22:35:51 localhost kernel: ds3000_tuner_writereg: writereg error(err == -5, reg == 0x42, value == 0x73)
May  3 22:35:51 localhost kernel: ds3000_writereg: writereg error(err == -5, reg == 0x03, value == 0x11)
May  3 22:35:51 localhost kernel: ds3000_tuner_writereg:

Re: linux-dvb Digest, Vol 76, Issue 1

Hikmet Ayrıksa — 2011-05-03T19:09:47

technisat skystar usb 2 hd cı linux driver?

       _______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media< at >vger.kernel.org
linux-dvb< at >linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Support to AverTV Volar Video Capture (H830D)

Manuel Carona — 2011-05-02T19:37:36

Hi,
How can I help (I'm not pro, It's only a hobby for me..:P) to get AverTV
Volar Video Capture (H830D) to work on linux?
Or can someone help me make it work? Is it necessary to make a module
for it from scratch? I can't find the firmware anywhere, is it
necessary? I can't find any .bin file to begin with...Is it even
possible for linux to support it?

Thanks in advance and keep the fantastic work you've done

Unkuiri


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media< at >vger.kernel.org
linux-dvb< at >linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

OK szap is looking good, but I feel so close...

Morgan Read — 2011-04-30T09:19:49

OK, think I might be getting somewhere...

I've been able to have szap put out something sensible looking:

[user< at >vortexbox ~]$ dvbtune -f 1183000 -s 22500 -p h -m
Using DVB card "Conexant CX24123/CX24109"
tuning DVB-S to L-Band:0, Pol:H Srate=22500000, 22kHz=off
ERROR setting tone
: Invalid argument
polling....
Getting frontend event
FE_STATUS:
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC
Bit error rate: 0
Signal strength: 61952
SNR: 58030
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC
FE READ UNCORRECTED BLOCKS: : Operation not supported
Signal=61952, Verror=0, SNR=57861dB, BlockErrors=0, (S|L|C|V|SY|)
FE READ UNCORRECTED BLOCKS: : Operation not supported
Signal=61952, Verror=0, SNR=57426dB, BlockErrors=0, (S|L|C|V|SY|)
FE READ UNCORRECTED BLOCKS: : Operation not supported
Signal=61952, Verror=0, SNR=57853dB, BlockErrors=0, (S|L|C|V|SY|)
^C
[user< at >v

Optus D1 tuning?

Morgan Read — 2011-04-30T09:05:24

Hello list

I've been trying to connect to the Optus D1 satellite from NZ, and I'm
tearing my hair out.

There is no config file dvb-apps/dvb-s so I've constructed the following from:
http://www.lyngsat.com/optusd1.html

# Optus D1 satellite 160E
# freq pol sr fec

### Freeview: DVB-S, Prime TV, Shine TV, C4, TV 3, Four, Stratos,
Parliament TV, Cue TV, Te Reo, TV 3 +1
S 12456000 H 22500000 3/4
### Freeview: DVB-S, Maori TV, TVNZ TV One Auckland, TVNZ TV 2, TVNZ7,
TVNZ U, TVNZ TV One Hamilton, TVNZ TV One Wellington, TVNZ TV One
Christchurch
S 12483000 H 22500000 3/4

### DVB-S2, Channel Nine, GEM, Go!
S 12398000 V 11909000 2/3
### SBS Tasmania: DVB-S, SBS One Tasmania, SBS Two Tasmania, SBS One
Tasmania HD, SBS Radio Tasmania AM, SBS Radio Tasmania FM
S 12648000 V 12600000 5/6

### Sky New Zealand: DVB-S2 Videoguard
S 12267000 H 22500000 2/3
S 12331000 H 22500000 2/3
S 12358000 H 22500000 2/3
### SkyNew Zealand: DVB-S Videoguard
S 12394000 H 22500000 3/4
S 12421000 H 22500000 3/4
### Sky New Zealand: DVB-S

Pach for Pinnacle PCTV 7010iX

Tomasz Knura — 2011-04-27T18:06:06

Hi
Please give me the Pach which the author used on the Wiki page http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_7010iX,
or show me where I can find it.

I compile SAA716x_hibrid driver but it not support my card.

---------------------------------------------------------------
Darmowy program do wypełniania PIT: http://linkint.pl/f2931


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media< at >vger.kernel.org
linux-dvb< at >linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

DViCO FusionHDTV DVB-T Dual Express2

Nicholas Leahy — 2011-04-27T01:13:00

I’m trying to get the DViCO FusionHDTV DVB-T
Dual Express2 http://linuxtv.org/wiki/index.php/DViCO_FusionHDTV_DVB-T_Dual_Express2 to work with v4l

I found what looks like most of the relevant
information in dib0700_devices.c at line /*DIB7070 generic*/ however im not
sure about the "dib7070p_tuner_attach" and
"dib7070_set_param_override" configs as they refer to a usb adaptor
dib0700

 

I have modified the following
modules to load the card cx23885.h, cx23885-dvb.c & cx23885-cards.c

 

nicholas< at >Trial-Backend:~$
dmesg | grep -i dib

[   30.930887] DiB0070: successfully
identified

[   30.930903] DVB: registering adapter 0
frontend 0 (DiBcom 7000PC)...

[   31.420874] DiB0070: successfully
identified

[   31.420890] DVB: registering adapter 1
frontend 0 (DiBcom 7000PC)...

nicholas< at >Trial-Backend:~$ dmesg | grep -i cx

[   29.869405] cx23885 driver version
0.0.2 loaded

[   29.881296] cx23885 0000:03:00.0: PCI
INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16

[   29.881552] CORE cx23885[0]:
subsystem: