gmane.comp.voip.wengophone.devel

Re: srtp support and asterisk

Dave Neary — 2008-05-05T09:56:41

Hi, Normally, SRTP should work with Asterisk. Cheers, Dave. Juraj Bednar wrote:

Réponse en cas d'absence

2008-05-01T10:00:05

_______________________________________________ Wengophone-devel mailing list Wengophone-devel-ZwoEplunGu1JKUZHOYzk1kEOCMrvLtNR< at >public.gmane.org http://dev.openwengo.com/mailman/listinfo/wengophone-devel

Réponse en cas d'absence

2008-05-01T10:00:05

Microphone volume control on Vista ...

Mauro Sérgio Ferreira Brasil — 2008-04-30T16:45:44

srtp support and asterisk

Juraj Bednar — 2008-04-25T23:52:18

Hello, is it possible to use SRTP support with Asterisk? Do I need to use anything special on Asterisk side? Does OpenWengo support SIP over TLS (over TCP)? How does the key exchange work and how do I know, that there is no man in the middle and I'm actually talking to the right party? Also, is anyone planning on implementing OTR support for chat protocols? Thanks, Juraj.

Réponse en cas d'absence

2008-04-21T10:00:06

Réponse en cas d'absence

2008-04-21T10:00:05

Encryption not Working in 2.1.2

2008-04-20T12:56:05

hello, i have a fresh install of wengophone version 2.1.2 (the binary-version) for linux. the counterpart also have a fresh install (same system). if we both activate encryption, it doesn't work, this means there is no encryption lock and the debug output says we're not encrypted. the debug-output looks like this: (debug) 12:35:10 virtual void PhApiWrapper::enableAEC(bool): AEC enabled (debug) 12:35:10 virtual void PhApiWrapper::enableHalfDuplex(bool): half-duplex disabled (info) 12:35:10 virtual void PhApiWrapper::setCallsEncryption(bool): Set call encryption to:1 (debug) 12:35:10 virtual void PhApiWrapper::init(): phApi successfully initialized and (info) 13:22:09 virtual bool PhApiWrapper::isCallEncrypted(int): Call with callId 1 has encryption mode 0 What can i do and why is this?

Réponse en cas d'absence

2008-04-15T19:30:36

Cross compiling libdbus-c++

maor — 2008-04-15T19:30:14

Hi, I was wondering if it possible to do cross compile dbus-c++, and if so how ? I was trying to build it using the following: CC,LD.CXX... to the cross compiler binaries and run /configure --prefix=$HOME/powerpc-target --host=powerpc-linux --with-build-li bdbus-cxx=$HOME/dbus-cpp/dbus-c++/ The issue is that this way the tools dbusxx-introspect and dbusxx-xml2cpp comp iled with the cross toolchain and trying to link with the native binary which obviously failing, anyway all the point is for these tools is to run on the ho st machine so they need to be compiled with "native" host compiler.I haven't s ucceed to figure the right way to do it, I'll appreciate any advice. Thanks, Maor.

Disable user interface (UI) items

Darshaka Pathirana — 2008-04-07T18:18:04

Hi! I've got a short question on customizing qutecom... Is it possible to disable some of the configuration items? [1] states this could possibly be done with some Qt-Stylesheets. [1] http://dev.openwengo.com/trac/openwengo/trac.cgi/wiki/WengoPhoneCobranding In particular I look for an option to hide the "Call Forward"-Option in Tools -> Configuration. I've looked in "WengoConfigDialog.ui", "QtWengoConfigDialog.cpp" and "QtCallforwardSettings.*" but could not find any way to disable it without touching the code... (if that would be the only way, I also would like here how this could be done that way). Thank you very much! Greetings, - Darsha

Re: Re: Re: WengoPhonereleasebuildissues(TaufikHidayat)

Darshaka Pathirana — 2008-04-07T09:46:36

Hi all! On 18.03.2008 22:59, Taufik Hidayat wrote: I checked the Code in OWCreateProjectBinary.cmake and tried to backtrace what is going on in there... Although I am not perfectly familiar with the CMake buildsystem I think this change will not work platform independently. Vadim, what do you think? My quick and dirty hack looks more like this (and worked for me): diff -r aedc121c37d3 wengophone/src/presentation/qt/CMakeLists.txt --- a/wengophone/src/presentation/qt/CMakeLists.txtFri Apr 04 15:28:03 2008 +0200 +++ b/wengophone/src/presentation/qt/CMakeLists.txtMon Apr 07 11:30:38 2008 +0200 < at >< at > -504,7 +504,11 < at >< at > ) endif (LINUX) -ow_create_project_binary(MACOSX_BUNDLE) +if (WIN32) +ow_create_project_binary(WIN32) +else (WIN32) +ow_create_project_binary(MACOSX_BUNDLE) +endif (WIN32) ow_locale_release( ${CMAKE_CURRENT_SOURCE_DIR}/lang As one can see the original line had "MACOSX_BUNDLE" as parameter for ow_create_project_binary; I just seperated WIN32 as I do not know what would happen to the

Thanks for help

Vadim Lebedev — 2008-04-07T09:35:35

Folks, I'd like to present and to thank Leonard Norrgard. Without his generous help I would be still struggling with mailng list and web site for qutecom Thanks a lot Leonard Vadim P.S. I'm going to inhibit posts to openwengo-devel list since tommorrow unless there is an objections.

Re: New list and and web home are active

Jerome WAGNER — 2008-04-04T10:33:06

Hello, Thumbs up vadim for managing the mailing list transfer to qutecom. What do you think we should do of the archives ? I was thinking about stopping the openwengo mailman as all the archives are on gmane at http://blog.gmane.org/gmane.comp.voip.wengophone.devel what do you think ? maybe gmane could transfer the subscription from openwengo-devel to qutecom-devel and the history would flow with both archives on it. In any case, now that the new lists are active, I strongly suggest you to subscribe on http://gmane.org/subscribe.php Jérôme --- Andreas Schneider wrote:

Re: New list and and web home are active

Andreas Schneider — 2008-04-03T13:44:29

New list and and web home are active

Vadim Lebedev — 2008-04-03T13:38:01

Folks, The subejcts says it all. Take a look to www.qutecom.org i've subscribed all existing subscribes to the new list You you didnt't receive a welcome message in couple of hours it means i've goofed so please go to http://lists.qutecom.org/mailman/listinfo/qutecom-dev and subscribe manually Thanks Vadim

Re: Wengo ActiveX/OCX/DLL etc

Vadim Lebedev — 2008-03-31T18:00:00

Re: Question on customizing Wengo

Vadim Lebedev — 2008-03-31T17:58:54

[PATCH 12 of 12] fix prototypes,includes and compiler warnings

2008-03-29T01:40:40

# HG changeset patch # User cavedon-gAmJrWFzCps< at >public.gmane.org # Date 1206754011 -3600 # Branch noext # Node ID 5f57d76fe0baae472037101d0d9f7b841348a8a2 # Parent 85eb91a757ae2ec9d7866e96b23740277986eb78 fix prototypes, includes and compiler warnings diff -r 85eb91a757ae -r 5f57d76fe0ba wifo/libosip2/src/osip2/osip.c --- a/wifo/libosip2/src/osip2/osip.cSat Mar 29 00:42:07 2008 +0100 +++ b/wifo/libosip2/src/osip2/osip.cSat Mar 29 02:26:51 2008 +0100 < at >< at > -133,7 +133,7 < at >< at > osip_response_get_destination (osip_mess } -int +static int osip_ixt_lock (osip_t * osip) { #ifdef OSIP_MT < at >< at > -143,7 +143,7 < at >< at > osip_ixt_lock (osip_t * osip) #endif } -int +static int osip_ixt_unlock (osip_t * osip) { #ifdef OSIP_MT < at >< at > -154,7 +154,7 < at >< at > osip_ixt_unlock (osip_t * osip) } /* these are for transactions that would need retransmission not handled by state machines */ -void +static void osip_add_ixt (osip_t * osip, ixt_t * ixt) { /* add in list osip_t->ixt */ < at >< at > -163,7 +163,7 < at >< at > osip_add_ixt (osip_t * osip,

[PATCH 10 of 12] fix prototypes and include files

2008-03-29T01:40:38

# HG changeset patch # User cavedon-gAmJrWFzCps< at >public.gmane.org # Date 1206747479 -3600 # Node ID d56062e64d5b134459d7e25e0cbe8aca28cd321a # Parent 312b968780884c180786147e70a8b677a29a41ff fix prototypes and include files diff -r 312b96878088 -r d56062e64d5b wifo/sVoIP/include/crypto.h --- a/wifo/sVoIP/include/crypto.hSat Mar 29 00:31:21 2008 +0100 +++ b/wifo/sVoIP/include/crypto.hSat Mar 29 00:37:59 2008 +0100 < at >< at > -34,7 +34,7 < at >< at > #ifndef _CRYPTO_H_ #define _CRYPTO_H_ -extern int evrb_crypto_init(); +extern int evrb_crypto_init(void); extern int evrb_decrypt(void* distant_ctx, void* data, size_t* len); extern int evrb_encrypt(void* local_ctx, void* data, size_t* len); extern char* evrb_cryptokey_get(void* ctx); < at >< at > -43,5 +43,6 < at >< at > extern void evrb_crypto_clean_exchanged_ extern void evrb_crypto_clean_exchanged_key(void* ctx); extern char* evrb_cryptokey_gen(); extern int evrb_crypto_keys_compute(void* local_ctx, void* distant_ctx, int caller); +extern int evrb_cryptokey_set_gen(void** ctx); #en

[PATCH 09 of 12] add missing compilation defines

2008-03-29T01:40:37

# HG changeset patch # User cavedon-gAmJrWFzCps< at >public.gmane.org # Date 1206747081 -3600 # Node ID 312b968780884c180786147e70a8b677a29a41ff # Parent df8df4e42c4ae83706317431a80039df12a1ef57 add missing compilation defines diff -r df8df4e42c4a -r 312b96878088 wifo/libosip2/CMakeLists-internal.txt --- a/wifo/libosip2/CMakeLists-internal.txtSat Mar 29 00:28:58 2008 +0100 +++ b/wifo/libosip2/CMakeLists-internal.txtSat Mar 29 00:31:21 2008 +0100 < at >< at > -34,6 +34,8 < at >< at > if (UNIX) -DHAVE_FCNTL_H -DHAVE_SYS_TIME_H -DHAVE_SYS_TYPES_H +-DHAVE_UNISTD_H +-DSTDC_HEADERS ) if (APPLE)