http://blog.gmane.org/gmane.os.openbsd.x11 hourly 1 1901-01-01T00:00+00:00 http://gmane.org/img/gmane-25t.png http://gmane.org http://permalink.gmane.org/gmane.os.openbsd.x11/474 <pre>Existe aussi en modhle 3x4 Impression HD et valise de transport incluses ! Idial pour la promotion (points de vente, stands,...) Installation aisie: 10 minutes ` 1 personne Dij` disponible 4 jours aprhs la commande ! Commandez-le en 5 minutes: facile &amp; rapide ! ROLLUP ORIGINAL Congu pour vos points de vente et salons commerciaux. 3 tailles disponibles. Doti d'un caisson rigide et de 2 pieds rotatifs renforcis. Usage allant jusqu'` 20 ivinements. Housse de transport incluse. A partir de 49 eur (htva) dhs le 1er acheti. COMPTOIRS Structures flexibles pour un montage aisi en moins de 2 minutes. Fournis avec sac de transport. Image au choix (vendue sipariment). A partir de 122 eur (prix htva) . PORTE- BROCHURES 5 modhles de stock. Finitions en acier chromi ou en alu. Ricepteurs rigides ou souples. Repliables. Sac de transport inclus. A partir de 39 eur (prix htva). VEDI express ) 2002-2012 Rollup, Pop Up, bbches, stands parapluie aux meilleurs prix et dans les meilleurs dilais. Powered by VEDI ne plus recevoir nos newsletters </pre> VEDI - Express 2012-05-19T10:26:13 http://permalink.gmane.org/gmane.os.openbsd.x11/473 <pre> Known issue. Normally your system should be able to run without a configuration file, so you don't need to run Xorg -configure. But xorg.conf.new has been written anyways, and it should be useable as a basis for further customization if needed. </pre> Matthieu Herrb 2012-05-04T15:53:29 http://permalink.gmane.org/gmane.os.openbsd.x11/472 <pre>Sorry for links. This is Xorg.0.log: [397841.462] X.Org X Server 1.11.4 Release Date: 2012-01-27 [397841.462] X Protocol Version 11, Revision 0 [397841.462] Build Operating System: OpenBSD 5.1 i386 [397841.462] Current Operating System: OpenBSD dimitry.my.domain 5.1 GENERIC.MP#188 i386 [397841.462] Build Date: 11 February 2012 10:00:22PM [397841.462] [397841.462] Current version of pixman: 0.22.2 [397841.462] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [397841.462] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [397841.463] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 4 13:57:50 2012 [397841.463] (II) Loader magic: 0x3c020020 [397841.463] (II) Module ABI versions: [397841.463] X.Org ANSI C Emulation: 0.4 [397841.463] X.Org Video Driver: 11.0 [397841.463] X.Org XInput driver : 13.0 [397841.463] X.Org Server Extension : 6.0 [397841.477] (--) checkDevMem: using aperture driver /dev/xf86 [397841.477] (--) PCI:*(0:1:0:0) 1002:9553:1025:0205 rev 0, Mem &lt; at &gt; 0xd0000000/268435456, 0xf4000000/65536, I/O &lt; at &gt; 0x00002000/256 [397841.478] List of video drivers: [397841.478] apm [397841.480] ark [397841.480] ati [397841.480] chips [397841.480] cirrus [397841.480] dummy [397841.480] geode [397841.480] glint [397841.480] i128 [397841.480] i740 [397841.480] intel [397841.480] mach64 [397841.480] mga [397841.480] neomagic [397841.480] nv [397841.480] openchrome [397841.480] r128 [397841.480] radeon [397841.480] radeonhd [397841.480] rendition [397841.480] s3 [397841.480] s3virge [397841.480] savage [397841.480] siliconmotion [397841.480] sis [397841.480] tdfx [397841.480] trident [397841.481] tseng [397841.481] wsudl [397841.481] vmware [397841.481] vmwlegacy [397841.481] voodoo [397841.481] vesa [397841.481] (II) LoadModule: "apm" [397841.481] (II) Loading /usr/X11R6/lib/modules/drivers/apm_drv.so [397841.481] (II) Module apm: vendor="X.Org Foundation" [397841.481] compiled for 1.11.4, module version = 1.2.3 [397841.481] Module class: X.Org Video Driver [397841.481] ABI class: X.Org Video Driver, version 11.0 [397841.481] (II) LoadModule: "ark" [397841.481] (II) Loading /usr/X11R6/lib/modules/drivers/ark_drv.so [397841.481] (II) Module ark: vendor="X.Org Foundation" [397841.481] compiled for 1.11.4, module version = 0.7.3 [397841.481] Module class: X.Org Video Driver [397841.481] ABI class: X.Org Video Driver, version 11.0 [397841.481] (II) LoadModule: "ati" [397841.481] (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so [397841.482] (II) Module ati: vendor="X.Org Foundation" [397841.482] compiled for 1.11.4, module version = 6.12.2 [397841.482] Module class: X.Org Video Driver [397841.482] ABI class: X.Org Video Driver, version 11.0 [397841.482] (II) LoadModule: "chips" [397841.482] (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.so [397841.482] (II) Module chips: vendor="X.Org Foundation" [397841.482] compiled for 1.11.4, module version = 1.2.4 [397841.482] Module class: X.Org Video Driver [397841.482] ABI class: X.Org Video Driver, version 11.0 [397841.482] (II) LoadModule: "cirrus" [397841.482] (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.so [397841.482] (II) Module cirrus: vendor="X.Org Foundation" [397841.482] compiled for 1.11.4, module version = 1.3.2 [397841.482] Module class: X.Org Video Driver [397841.482] ABI class: X.Org Video Driver, version 11.0 [397841.482] (II) LoadModule: "dummy" [397841.483] (II) Loading /usr/X11R6/lib/modules/drivers/dummy_drv.so [397841.483] (II) Module dummy: vendor="X.Org Foundation" [397841.483] compiled for 1.11.4, module version = 0.3.4 [397841.483] Module class: X.Org Video Driver [397841.483] ABI class: X.Org Video Driver, version 11.0 [397841.483] (II) LoadModule: "geode" [397841.483] (II) Loading /usr/X11R6/lib/modules/drivers/geode_drv.so [397841.483] (II) Module geode: vendor="X.Org Foundation" [397841.483] compiled for 1.11.4, module version = 2.11.12 [397841.483] Module class: X.Org Video Driver [397841.483] ABI class: X.Org Video Driver, version 11.0 [397841.483] (II) LoadModule: "glint" [397841.484] (II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.so [397841.484] (II) Module glint: vendor="X.Org Foundation" [397841.484] compiled for 1.11.4, module version = 1.2.4 [397841.484] Module class: X.Org Video Driver [397841.484] ABI class: X.Org Video Driver, version 11.0 [397841.484] (II) LoadModule: "i128" [397841.484] (II) Loading /usr/X11R6/lib/modules/drivers/i128_drv.so [397841.484] (II) Module i128: vendor="X.Org Foundation" [397841.484] compiled for 1.11.4, module version = 1.3.3 [397841.484] Module class: X.Org Video Driver [397841.484] ABI class: X.Org Video Driver, version 11.0 [397841.484] (II) LoadModule: "i740" [397841.485] (II) Loading /usr/X11R6/lib/modules/drivers/i740_drv.so [397841.485] (II) Module i740: vendor="X.Org Foundation" [397841.485] compiled for 1.11.4, module version = 1.3.2 [397841.485] Module class: X.Org Video Driver [397841.485] ABI class: X.Org Video Driver, version 11.0 [397841.485] (II) LoadModule: "intel" [397841.485] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so [397841.486] (II) Module intel: vendor="X.Org Foundation" [397841.487] compiled for 1.11.4, module version = 2.12.0 [397841.487] Module class: X.Org Video Driver [397841.487] ABI class: X.Org Video Driver, version 11.0 [397841.487] (II) LoadModule: "mach64" [397841.487] (II) Loading /usr/X11R6/lib/modules/drivers/mach64_drv.so [397841.487] (II) Module mach64: vendor="X.Org Foundation" [397841.487] compiled for 1.11.4, module version = 6.8.2 [397841.487] Module class: X.Org Video Driver [397841.487] ABI class: X.Org Video Driver, version 11.0 [397841.487] (II) LoadModule: "mga" [397841.487] (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.so [397841.488] (II) Module mga: vendor="X.Org Foundation" [397841.488] compiled for 1.11.4, module version = 1.4.13 [397841.488] Module class: X.Org Video Driver [397841.488] ABI class: X.Org Video Driver, version 11.0 [397841.488] (II) LoadModule: "neomagic" [397841.488] (II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.so [397841.488] (II) Module neomagic: vendor="X.Org Foundation" [397841.488] compiled for 1.11.4, module version = 1.2.5 [397841.488] Module class: X.Org Video Driver [397841.488] ABI class: X.Org Video Driver, version 11.0 [397841.488] (II) LoadModule: "nv" [397841.489] (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.so [397841.489] (II) Module nv: vendor="X.Org Foundation" [397841.489] compiled for 1.11.4, module version = 2.1.18 [397841.489] Module class: X.Org Video Driver [397841.489] ABI class: X.Org Video Driver, version 11.0 [397841.489] (II) LoadModule: "openchrome" [397841.489] (II) Loading /usr/X11R6/lib/modules/drivers/openchrome_drv.so [397841.490] (II) Module openchrome: vendor="http://openchrome.org/" [397841.490] compiled for 1.11.4, module version = 0.2.904 [397841.490] Module class: X.Org Video Driver [397841.490] ABI class: X.Org Video Driver, version 11.0 [397841.490] (II) LoadModule: "r128" [397841.490] (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.so [397841.490] (II) Module r128: vendor="X.Org Foundation" [397841.490] compiled for 1.11.4, module version = 6.8.1 [397841.490] Module class: X.Org Video Driver [397841.490] ABI class: X.Org Video Driver, version 11.0 [397841.490] (II) LoadModule: "radeon" [397841.491] (II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.so [397841.491] (II) Module radeon: vendor="X.Org Foundation" [397841.491] compiled for 1.11.4, module version = 6.12.2 [397841.491] Module class: X.Org Video Driver [397841.491] ABI class: X.Org Video Driver, version 11.0 [397841.491] (II) LoadModule: "radeonhd" [397841.492] (II) Loading /usr/X11R6/lib/modules/drivers/radeonhd_drv.so [397841.492] (II) Module radeonhd: vendor="AMD GPG" [397841.492] compiled for 1.11.4, module version = 1.3.0 [397841.492] Module class: X.Org Video Driver [397841.492] ABI class: X.Org Video Driver, version 11.0 [397841.492] (II) LoadModule: "rendition" [397841.493] (II) Loading /usr/X11R6/lib/modules/drivers/rendition_drv.so [397841.493] (II) Module rendition: vendor="X.Org Foundation" [397841.493] compiled for 1.11.4, module version = 4.2.4 [397841.493] Module class: X.Org Video Driver [397841.493] ABI class: X.Org Video Driver, version 11.0 [397841.493] (II) LoadModule: "s3" [397841.493] (II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.so [397841.494] (II) Module s3: vendor="X.Org Foundation" [397841.494] compiled for 1.11.4, module version = 0.6.3 [397841.494] Module class: X.Org Video Driver [397841.494] ABI class: X.Org Video Driver, version 11.0 [397841.494] (II) LoadModule: "s3virge" [397841.494] (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.so [397841.494] (II) Module s3virge: vendor="X.Org Foundation" [397841.494] compiled for 1.11.4, module version = 1.10.4 [397841.494] Module class: X.Org Video Driver [397841.494] ABI class: X.Org Video Driver, version 11.0 [397841.494] (II) LoadModule: "savage" [397841.495] (II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.so [397841.495] (II) Module savage: vendor="X.Org Foundation" [397841.495] compiled for 1.11.4, module version = 2.3.2 [397841.495] Module class: X.Org Video Driver [397841.495] ABI class: X.Org Video Driver, version 11.0 [397841.495] (II) LoadModule: "siliconmotion" [397841.496] (II) Loading /usr/X11R6/lib/modules/drivers/siliconmotion_drv.so [397841.496] (II) Module siliconmotion: vendor="X.Org Foundation" [397841.496] compiled for 1.11.4, module version = 1.7.5 [397841.496] Module class: X.Org Video Driver [397841.496] ABI class: X.Org Video Driver, version 11.0 [397841.496] (II) LoadModule: "sis" [397841.496] (II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.so [397841.497] (II) Module sis: vendor="X.Org Foundation" [397841.497] compiled for 1.11.4, module version = 0.10.3 [397841.497] Module class: X.Org Video Driver [397841.497] ABI class: X.Org Video Driver, version 11.0 [397841.497] (II) LoadModule: "tdfx" [397841.497] (II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.so [397841.497] (II) Module tdfx: vendor="X.Org Foundation" [397841.497] compiled for 1.11.4, module version = 1.4.3 [397841.497] Module class: X.Org Video Driver [397841.497] ABI class: X.Org Video Driver, version 11.0 [397841.497] (II) LoadModule: "trident" [397841.498] (II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.so [397841.498] (II) Module trident: vendor="X.Org Foundation" [397841.498] compiled for 1.11.4, module version = 1.3.4 [397841.498] Module class: X.Org Video Driver [397841.498] ABI class: X.Org Video Driver, version 11.0 [397841.498] (II) LoadModule: "tseng" [397841.499] (II) Loading /usr/X11R6/lib/modules/drivers/tseng_drv.so [397841.499] (II) Module tseng: vendor="X.Org Foundation" [397841.499] compiled for 1.11.4, module version = 1.1.0 [397841.499] Module class: X.Org Video Driver [397841.499] ABI class: X.Org Video Driver, version 11.0 [397841.499] (II) LoadModule: "wsudl" [397841.500] (II) Loading /usr/X11R6/lib/modules/drivers/wsudl_drv.so [397841.500] (II) Module wsudl: vendor="X.Org Foundation" [397841.500] compiled for 1.11.4, module version = 0.2.1 [397841.500] ABI class: X.Org Video Driver, version 11.0 [397841.500] (II) LoadModule: "vmware" [397841.500] (II) Loading /usr/X11R6/lib/modules/drivers/vmware_drv.so [397841.500] (II) Module vmware: vendor="X.Org Foundation" [397841.500] compiled for 1.11.4, module version = 11.0.3 [397841.500] Module class: X.Org Video Driver [397841.501] ABI class: X.Org Video Driver, version 11.0 [397841.501] (II) LoadModule: "vmwgfx" [397841.503] (WW) Warning, couldn't open module vmwgfx [397841.503] (II) UnloadModule: "vmwgfx" [397841.503] (II) Unloading vmwgfx [397841.503] (EE) Failed to load module "vmwgfx" (module does not exist, 0) [397841.503] (EE) vmware: Please ignore the above warnings about not being able to to load module/driver vmwgfx [397841.503] (II) vmware: Using vmwlegacy driver everything is fine. [397841.503] (II) LoadModule: "vmwlegacy" [397841.503] (II) Loading /usr/X11R6/lib/modules/drivers/vmwlegacy_drv.so [397841.503] (II) Module vmwlegacy: vendor="X.Org Foundation" [397841.503] compiled for 1.11.4, module version = 11.0.3 [397841.503] Module class: X.Org Video Driver [397841.503] ABI class: X.Org Video Driver, version 11.0 [397841.503] (II) LoadModule: "vmwlegacy" [397841.504] (II) Loading /usr/X11R6/lib/modules/drivers/vmwlegacy_drv.so [397841.504] (II) Module vmwlegacy: vendor="X.Org Foundation" [397841.504] compiled for 1.11.4, module version = 11.0.3 [397841.504] Module class: X.Org Video Driver [397841.504] ABI class: X.Org Video Driver, version 11.0 [397841.504] (II) UnloadModule: "vmwlegacy" [397841.504] (II) Unloading vmwlegacy [397841.504] (II) Failed to load module "vmwlegacy" (already loaded, 1006647142) [397841.504] (II) LoadModule: "voodoo" [397841.505] (II) Loading /usr/X11R6/lib/modules/drivers/voodoo_drv.so [397841.505] (II) Module voodoo: vendor="X.Org Foundation" [397841.505] compiled for 1.11.4, module version = 1.1.0 [397841.505] Module class: X.Org Video Driver [397841.505] ABI class: X.Org Video Driver, version 11.0 [397841.505] (II) LoadModule: "vesa" [397841.505] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so [397841.506] (II) Module vesa: vendor="X.Org Foundation" [397841.506] compiled for 1.11.4, module version = 2.3.0 [397841.506] Module class: X.Org Video Driver [397841.506] ABI class: X.Org Video Driver, version 11.0 [397841.506] (WW) Falling back to old probe method for apm [397841.506] (WW) Falling back to old probe method for ark [397841.506] (WW) Falling back to old probe method for cirrus [397841.506] (II) Loading sub module "cirrus_laguna" [397841.506] (II) LoadModule: "cirrus_laguna" [397841.506] (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_laguna.so [397841.506] (II) Module cirrus_laguna: vendor="X.Org Foundation" [397841.506] compiled for 1.11.4, module version = 1.0.0 [397841.506] ABI class: X.Org Video Driver, version 11.0 [397841.506] (II) Loading sub module "cirrus_alpine" [397841.506] (II) LoadModule: "cirrus_alpine" [397841.506] (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.so [397841.507] (II) Module cirrus_alpine: vendor="X.Org Foundation" [397841.507] compiled for 1.11.4, module version = 1.0.0 [397841.507] ABI class: X.Org Video Driver, version 11.0 [397841.507] (WW) Falling back to old probe method for dummy [397841.507] (WW) Falling back to old probe method for glint [397841.507] (WW) Falling back to old probe method for i128 [397841.507] (WW) Falling back to old probe method for i740 [397841.507] (WW) Falling back to old probe method for neomagic [397841.507] (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI), ATI Radeon Mobility X300 (M24) 3152 (PCIE), ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE), ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP), ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP), ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP), ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650, ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP), ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337, ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI), ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP), ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP), ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP), ATI Radeon Mobility 9800 (M18) JN (AGP), ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP), ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP), ATI Radeon Mobility M7 LW (AGP), ATI Mobility FireGL 7800 M7 LX (AGP), ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP), ATI FireGL Mobility 9000 (M9) Ld (AGP), ATI Radeon Mobility 9000 (M9) Lf (AGP), ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP), ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP), ATI Radeon Mobility 9600 (M10) NQ (AGP), ATI Radeon Mobility 9600 (M11) NR (AGP), ATI Radeon Mobility 9600 (M10) NS (AGP), ATI FireGL Mobility T2 (M10) NT (AGP), ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI), ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI), ATI Radeon Mobility X300 (M22) 5460 (PCIE), ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE), ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE), ATI Radeon X800PRO (R423) UI (PCIE), ATI Radeon X800LE (R423) UJ (PCIE), ATI Radeon X800SE (R423) UK (PCIE), ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE), ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE), ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE), ATI FireGL unknown (R423) UR (PCIE), ATI FireGL unknown (R423) UT (PCIE), ATI Mobility FireGL V5000 (M26) (PCIE), ATI Mobility FireGL V5000 (M26) (PCIE), ATI Mobility Radeon X700 XL (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834, ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon XPRESS 200 5954 (PCIE), ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP), ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI), ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE), ATI Radeon XPRESS 200M 5975 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE), ATI Radeon XPRESS 200M 5A42 (PCIE), ATI Radeon XPRESS 200 5A61 (PCIE), ATI Radeon XPRESS 200M 5A62 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE), ATI Radeon X600 (RV370) 5B62 (PCIE), ATI Radeon X550 (RV370) 5B63 (PCIE), ATI FireGL V3100 (RV370) 5B64 (PCIE), ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE), ATI Radeon Mobility 9200 (M9+) 5C61 (AGP), ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Mobility Radeon X800 XT (M28) (PCIE), ATI Mobility FireGL V5100 (M28) (PCIE), ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE), ATI Radeon X850 XT PE (R480) (PCIE), ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE), ATI unknown Radeon / FireGL (R480) 5D50 (PCIE), ATI Radeon X850 XT (R480) (PCIE), ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 PRO (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800, ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, ATI Mobility Radeon X1400, ATI Radeon X1300/X1550, ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300, ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350, ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550, ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450, ATI Radeon X1300/X1550, ATI Mobility Radeon X2300, ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, ATI Mobility Radeon X1350, ATI Mobility Radeon X1450, ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350, ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600, ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600, ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT, ATI FireGL V5200, ATI Mobility Radeon X1700, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300, ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950, ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560, ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400, ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560, ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740, ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2, ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98, ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98, ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670], ATI RADEON E4600, ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610, ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870, ATI Mobility Radeon HD 3850, ATI Radeon HD3850, ATI Mobility Radeon HD 3850 X2, ATI RV670, ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series, ATI RV630, ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Mobility FireGL Graphics Processor, ATI Radeon RV710, ATI Radeon HD 3470, ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700, ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics, ATI Radeon HD Graphics, ATI Radeon Graphics, ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics, ATI Radeon Graphics [397841.508] (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices: [397841.508] RV505 : Radeon X1550, X1550 64bit. RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350. RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250. R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350. RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200. RV535 : Radeon X1300, X1650. RV550 : Radeon X2300 HD. RV560 : Radeon X1650. RV570 : Radeon X1950, X1950 GT; FireGL V7400. R580 : Radeon X1900, X1950; AMD Stream Processor. [397841.508] R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650. RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000. RV620 : Radeon HD 3450, HD 3470. RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630; FireGL V3600/V5600. RV635 : Radeon HD 3650, HD 3670. RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170. R680 : Radeon HD 3870 X2. [397841.508] M52 : Mobility Radeon X1300. M54 : Mobility Radeon X1400; M54-GL. M56 : Mobility Radeon X1600; Mobility FireGL V5200. M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200. M62 : Mobility Radeon X1350. M64 : Mobility Radeon X1450, X2300. M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250. M68 : Mobility Radeon X1900. [397841.508] M71 : Mobility Radeon HD 2300. M72 : Mobility Radeon HD 2400; Radeon E2400. M74 : Mobility Radeon HD 2400 XT. M76 : Mobility Radeon HD 2600; (Gemini ATI) Mobility Radeon HD 2600 XT. [397841.508] M82 : Mobility Radeon HD 3400. M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700. M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2. [397841.508] RS600 : Radeon Xpress 1200, Xpress 1250. RS690 : Radeon X1200, X1250, X1270. RS740 : RS740, RS740M. RS780 : Radeon HD 3100/3200/3300 Series. [397841.508] R700 : Radeon R700. RV710 : Radeon HD4570, HD4350. RV730 : Radeon HD4670, HD4650. RV740 : Radeon HD4770. EXPERIMENTAL AND UNTESTED. RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro. RV790 : Radeon HD 4890. [397841.508] M92 : Mobility Radeon HD4330, HD4530, HD4570. EXPERIMENTAL. M93 : Mobility Radeon M93. EXPERIMENTAL AND UNTESTED. M96 : Mobility Radeon HD4600. M97 : Mobility Radeon HD4860. EXPERIMENTAL AND UNTESTED. M98 : Mobility Radeon HD4850, HD4870. [397841.508] [397841.508] (II) RADEONHD: version 1.3.0, built from dist of git branch master, commit 8cbff7bf [397841.508] (WW) Falling back to old probe method for s3 [397841.508] (WW) Falling back to old probe method for s3virge [397841.508] (WW) Falling back to old probe method for siliconmotion [397841.508] (WW) Falling back to old probe method for sis [397841.508] (WW) Falling back to old probe method for trident [397841.508] (WW) Falling back to old probe method for tseng [397841.508] (WW) Falling back to old probe method for wsudl [397841.508] (WW) Falling back to old probe method for voodoo [397841.508] (II) VESA: driver for VESA chipsets: vesa [397841.982] (++) Using config file: "/root/xorg.conf.new" [397841.982] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [397841.982] (==) ServerLayout "X.org Configured" [397841.982] (**) |--&gt;Screen "Screen0" (0) [397841.982] (**) | |--&gt;Monitor "Monitor0" [397841.983] (**) | |--&gt;Device "Card0" [397841.983] (**) |--&gt;Screen "Screen1" (1) [397841.983] (**) | |--&gt;Monitor "Monitor1" [397841.983] (**) | |--&gt;Device "Card1" [397841.983] (**) |--&gt;Screen "Screen2" (2) [397841.983] (**) | |--&gt;Monitor "Monitor2" [397841.983] (**) | |--&gt;Device "Card2" [397841.983] (**) |--&gt;Input Device "Mouse0" [397841.983] (**) |--&gt;Input Device "Keyboard0" [397841.983] (==) Disabling SIGIO handlers for input devices [397841.983] (==) Automatically adding devices [397841.983] (==) Automatically enabling devices [397841.983] (**) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/, /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [397841.983] (**) ModulePath set to "/usr/X11R6/lib/modules" [397841.983] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [397841.983] (WW) Disabling Mouse0 [397841.983] (WW) Disabling Keyboard0 [397841.983] (II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.so [397841.983] (WW) Falling back to old probe method for vesa [397841.983] Number of created screens does not match number of detected devices. Configuration failed. [397841.984] Server terminated with error (2). Closing log file. configuration </pre> Dimitry T 2012-05-04T15:04:42 http://permalink.gmane.org/gmane.os.openbsd.x11/471 <pre> I see no Xorg.0.log in the above URL. And it's a pain for me to open a browser to look at a text file from a potential unsafe site. Please try to include the log file inline (or attached as text/plain) in your message instead. Thanks. </pre> Matthieu Herrb 2012-05-04T14:55:04 http://permalink.gmane.org/gmane.os.openbsd.x11/470 <pre>Hi, I have problem with X -configure on OpenBSD 5.1, after all configuration failed. This is my dmesg http://pastebin.com/GhyAfiwY and Xorg.0.log http://pastebin.com/GhyAfiwY, if somebody can help me. </pre> Dimitry T 2012-05-04T14:31:09 http://permalink.gmane.org/gmane.os.openbsd.x11/469 <pre>Disponible en 3 jours Impression HD (risistance UV) 4 supports et 8 finitions au choix Fichiers: transfert online direct ou diffiri Commandez en 5 minutes: facile &amp; rapide! Igalement sur mesure: adhisifs, affiches papier, posters photo &amp; papier peint adhisif Pour toutes les applications * vitres et vitrines * points de vente, bureaux * adhisifs de sol * signalitique (intirieur/extirieur) * auto * micro-perfori ("One Way Vision") * etc... Associez-les ` un laminat pour optimiser la risistance et la tenue des couleurs. Papier peint personnalisi * impression HD optimisie * textile satin autocollant M1 * repositionnable * haut de gamme * dico d'intirieur, aminagement magasins, stands, etc... Affiches papier &amp; posters photo * impression HD * support laminable * profiles de supension en aluminium anodisi VEDI express ) 2002-2012 Rollup, Pop Up, bbches, stands parapluie aux meilleurs prix et dans les meilleurs dilais. Powered by VEDI ne plus recevoir nos newsletters Fichiers acceptis Taille des images : Pour Pop Up 3x3m : - Image 337,5x222cm : fichier 337,5x222cm Pour Pop Up 4x3m : - Image 405x222cm : fichier 405x222cm Risolutions conseillies: PDF: 80 dpi avec typo vectorisie TIFF ou JPEG: 120 dpi Format des fichiers acceptis : PDF HD, EPS (avec polices et images incorpories et vectorisies), TIFF, JPEG Respect des couleurs : De prifirence, fournir les fichiers en CMYK (noir quadri: C70 M70 Y70 K100). Les fichiers RGB seront convertis. Garanties de qualiti Qualiti d'impression : Impression HD : vos images sont toujours imprimies en haute difinition. Couleurs vivantes et respecties : La gestion des couleurs et la garantie de rendu sont assuriespar notre iquipe d'infographistes et d'imprimeurs professionnels expirimentis. Encres UV risistantes : Les encres utilisies pour l'impression de votre image sont toujours des encres risistantes aux rayons ultra violets. Ces encres de qualiti garantissent une bonne longiviti aux couleurs de votre visuel, pour une image toujours vive. Supports de qualiti : Vos images sont imprimies sur support satini, pour un meilleur rendu des couleurs et des contrastes. D'une ipaisseur de 170 5m ou supirieure, nos supports d'impression vous garantissent une image qui ne gondole pas et offrent une protection contre les griffes et les poussihres. Risistants aux dichirures et ` l'eau, ils peuvent se nettoyer. Images anti-feu : Vos images peuvent jtre imprimies sur support ignifugi B2 / M1 (en option), idial et mjme parfois obligatoire pour les foires et salons. Qualiti : Structure solide : iliments construits en acier peint de section 20cm x 20 cm. Simple ` monter : assemblage sans outil, montage en 30 minutes ` deux personnes. Idial pour la participation ` vos salons grand public ou professionnels. La structure Wave permet de construire des stands dune multitude de dimensions. Les images murales sont fournies roulies avec une barre de suspension intigri (Veclip). Elles se suspendent au montant horizontal supirieur du stand et se diroulent de haut en bas entre les piliers. Leur largeur est de maximum 2 mhtres afin de faciliter le stockage et le transport. Il existe 4 largeurs (50, 100, 150 et 200 cm) et 2 hauteurs (220 cm pour les stands de 2m50 et 290cm pour les stand de 3m20). Mises dos ` dos, elles permettent laffichage recto-verso. Vous choisissez vous-mjme les diffirentes largeurs de sorte de combler complhtement un ctti du stand ou de laisser un passage. La largeur disponible pour limage est igale ` la largeur du stand moins 50 cm. Par exemple: si la largeur du ctti du stand ` fermer est de 5 mhtres, la largeur disponible pour limage est de 450cm. Pour combler cette largeur, vous pouvez commander 2 images de 200cm et 1 image de 50cm. Si la hauteur de votre stand est de 320 cm, vous choisirez une hauteur dimage de 290 cm. Production et livraison : Livraison express : votre stand livri, prjt ` monter en 5 jours ouvrables. Conditions ginirales de ventes Giniralitis Seules les prisentes conditions de vente sont dapplication pour la vente. Ces conditions ginirales s'appliquent ` lexclusion de toutes autres conditions, mjme celles reprises sur des bons de commande imanant de lacheteur. Le vendeur se riserve le droit de modifier ` tout moment ces conditions ginirales. Nianmoins, les commandes en cours restent soumises aux conditions applicables au moment oy la vente a iti conclue. Les photos, illustrations, couleurs et textes associis aux produits repris sur ce site nont pas de caracthre contractuel et de ce fait ne sauraient engager la responsabiliti du vendeur. Toute commande donnera lieu ` une facturation 30 jours aprhs son acceptation dans le cas oy la commande ne peut jtre exicutie en raison d'un retard imputable au client. En cas d'annulation de sa commande, le client sera redevable d'un montant correspondant aux frais dij` exposi, augmenti d'une indemniti de 15 % du montant commandi. La facture sera itablie ` la sociiti de facturation introduite lors de la commande. En cas de demande de changement de sociiti de facturation postirieure ` la commande, une surcharge de EUR 25,HT - sera appliquie pour frais administratifs. Toute marchandise livrie reste la propriiti du vendeur jusqu'au paiement intigral de son prix par l'acheteur. Celui-ci supportera toutefois seul les risques de pertes, de digradations ou de destruction de la chose livrie, dhs le dipart de nos ateliers. La responsabiliti du vendeur est toujours limitie au remplacement de l'image. En cas de retard de livraison, la responsabiliti du vendeur est limitie ` une indemniti forfaitaire de 150 euros ou au montant du prijudice riel subi par le client si celui-ci est moindre. Prix Nos prix sentendent hors taxes et sont exprimis en euros. Les prix de vente des produits sur ce site sont ceux indiquis au moment de lenregistrement de la commande. Sauf avis contraire, les prix de nos produits ne comprennent pas les frais de livraison, qui sont calculis en suppliment ` la fin de la commande selon la destination et/ou le mode de livraison souhaiti. Commande Lors de lenregistrement de la commande, vous jtes tenus de fournir des donnies pricises et exactes notamment quant ` lidentiti du destinataire de la commande, aux informations relatives ` la TVA, ` ladresse de livraison, et ` ladresse email oy une confirmation de commande peut jtre adressie. Une fois le processus de commande achevi, vous navez plus la possibiliti de renoncer ` celle-ci. Paiement Les diffirents modes de paiement autorisis, ainsi que l'implication de ces modes sur le dilai de production est ditailli ` la page Conditions de Paiement. Livraisons Les dilais de livraisons sont toujours donnis ` titre indicatif et ne peuvent en aucun cas jtre considiris comme iliments contractuels. Ils sont exprimis en jours ouvrables. Propriiti intellectuelle Le client garantit possider les droits de propriiti intellectuelle des iliments (visuels, logo, slogans, etc.) quil nous transmet et qui sont nicessaires ` la reproduction de l'image ainsi que les iventuelles autorisations requises pour son placement. Il demeure seul responsable de l'acquittement des taxes iventuellement giniries par la rialisation de son projet. </pre> VEDI - Express 2012-04-06T22:21:47 http://permalink.gmane.org/gmane.os.openbsd.x11/468 <pre>Le rollup executive ` partir de 79 ht dhs le 1er rollup: Impression HD incluse Le rollup design pour votre communication professionnelle 2 tailles disponibles (85x200 et 100x200) Montage ultra rapide Dispositif garanti Housse de transport doublie et comprise dans le prix Jusqu'` 50 ivhnements en usage normal Dij` disponible 2 jours aprhs la commande Dicouvrez les autres gammes de rollups : ROLLUP ECO - Doti d'un caisson light et de pieds rotatifs - Privu pour une utilisation de courte durie - Idial pour vos promos et actions "one shot" - Disponible en format 85x200 cm - Housse de transport en nylon fournie A partir de 44 eur (htva) dhs le 1er acheti. ROLLUP ORIGINAL - Congu pour vos points de vente et salons commerciaux. - 3 tailles - Caisson rigide - 2 pieds rotatifs renforcis - Usage allant jusqu'` 20 ivhnements - Housse de transport incluse Apd 49 eur ( htva) dhs le 1er acheti. ROLLUP DELUXE - 3 modhles de stock - Durie de vie de plus de 50 ivhnements en usage normal - Design ipuri - Finition soignie - Pieds intigris dans le chbssis renforci - Sac de transport doubli fourni Apd 99 eur (htva) dhs le 1er acheti. VEDI express ) 2002-2012 Rollup, Pop Up, bbches, stands parapluie aux meilleurs prix et dans les meilleurs dilais. Powered by VEDI ne plus recevoir nos newsletters Fichiers acceptis Taille des images : Pour Pop Up 3x3m : - Image 337,5x222cm : fichier 337,5x222cm Pour Pop Up 4x3m : - Image 405x222cm : fichier 405x222cm Risolutions conseillies: PDF: 80 dpi avec typo vectorisie TIFF ou JPEG: 120 dpi Format des fichiers acceptis : PDF HD, EPS (avec polices et images incorpories et vectorisies), TIFF, JPEG Respect des couleurs : De prifirence, fournir les fichiers en CMYK (noir quadri: C70 M70 Y70 K100). Les fichiers RGB seront convertis. Garanties de qualiti Qualiti d'impression : Impression HD : vos images sont toujours imprimies en haute difinition. Couleurs vivantes et respecties : La gestion des couleurs et la garantie de rendu sont assuriespar notre iquipe d'infographistes et d'imprimeurs professionnels expirimentis. Encres UV risistantes : Les encres utilisies pour l'impression de votre image sont toujours des encres risistantes aux rayons ultra violets. Ces encres de qualiti garantissent une bonne longiviti aux couleurs de votre visuel, pour une image toujours vive. Supports de qualiti : Vos images sont imprimies sur support satini, pour un meilleur rendu des couleurs et des contrastes. D'une ipaisseur de 170 5m ou supirieure, nos supports d'impression vous garantissent une image qui ne gondole pas et offrent une protection contre les griffes et les poussihres. Risistants aux dichirures et ` l'eau, ils peuvent se nettoyer. Images anti-feu : Vos images peuvent jtre imprimies sur support ignifugi B2 / M1 (en option), idial et mjme parfois obligatoire pour les foires et salons. Qualiti : Structure solide : iliments construits en acier peint de section 20cm x 20 cm. Simple ` monter : assemblage sans outil, montage en 30 minutes ` deux personnes. Idial pour la participation ` vos salons grand public ou professionnels. La structure Wave permet de construire des stands dune multitude de dimensions. Les images murales sont fournies roulies avec une barre de suspension intigri (Veclip). Elles se suspendent au montant horizontal supirieur du stand et se diroulent de haut en bas entre les piliers. Leur largeur est de maximum 2 mhtres afin de faciliter le stockage et le transport. Il existe 4 largeurs (50, 100, 150 et 200 cm) et 2 hauteurs (220 cm pour les stands de 2m50 et 290cm pour les stand de 3m20). Mises dos ` dos, elles permettent laffichage recto-verso. Vous choisissez vous-mjme les diffirentes largeurs de sorte de combler complhtement un ctti du stand ou de laisser un passage. La largeur disponible pour limage est igale ` la largeur du stand moins 50 cm. Par exemple: si la largeur du ctti du stand ` fermer est de 5 mhtres, la largeur disponible pour limage est de 450cm. Pour combler cette largeur, vous pouvez commander 2 images de 200cm et 1 image de 50cm. Si la hauteur de votre stand est de 320 cm, vous choisirez une hauteur dimage de 290 cm. Production et livraison : Livraison express : votre stand livri, prjt ` monter en 5 jours ouvrables. Conditions ginirales de ventes Giniralitis Seules les prisentes conditions de vente sont dapplication pour la vente. Ces conditions ginirales s'appliquent ` lexclusion de toutes autres conditions, mjme celles reprises sur des bons de commande imanant de lacheteur. Le vendeur se riserve le droit de modifier ` tout moment ces conditions ginirales. Nianmoins, les commandes en cours restent soumises aux conditions applicables au moment oy la vente a iti conclue. Les photos, illustrations, couleurs et textes associis aux produits repris sur ce site nont pas de caracthre contractuel et de ce fait ne sauraient engager la responsabiliti du vendeur. Toute commande donnera lieu ` une facturation 30 jours aprhs son acceptation dans le cas oy la commande ne peut jtre exicutie en raison d'un retard imputable au client. En cas d'annulation de sa commande, le client sera redevable d'un montant correspondant aux frais dij` exposi, augmenti d'une indemniti de 15 % du montant commandi. La facture sera itablie ` la sociiti de facturation introduite lors de la commande. En cas de demande de changement de sociiti de facturation postirieure ` la commande, une surcharge de EUR 25,HT - sera appliquie pour frais administratifs. Toute marchandise livrie reste la propriiti du vendeur jusqu'au paiement intigral de son prix par l'acheteur. Celui-ci supportera toutefois seul les risques de pertes, de digradations ou de destruction de la chose livrie, dhs le dipart de nos ateliers. La responsabiliti du vendeur est toujours limitie au remplacement de l'image. En cas de retard de livraison, la responsabiliti du vendeur est limitie ` une indemniti forfaitaire de 150 euros ou au montant du prijudice riel subi par le client si celui-ci est moindre. Prix Nos prix sentendent hors taxes et sont exprimis en euros. Les prix de vente des produits sur ce site sont ceux indiquis au moment de lenregistrement de la commande. Sauf avis contraire, les prix de nos produits ne comprennent pas les frais de livraison, qui sont calculis en suppliment ` la fin de la commande selon la destination et/ou le mode de livraison souhaiti. Commande Lors de lenregistrement de la commande, vous jtes tenus de fournir des donnies pricises et exactes notamment quant ` lidentiti du destinataire de la commande, aux informations relatives ` la TVA, ` ladresse de livraison, et ` ladresse email oy une confirmation de commande peut jtre adressie. Une fois le processus de commande achevi, vous navez plus la possibiliti de renoncer ` celle-ci. Paiement Les diffirents modes de paiement autorisis, ainsi que l'implication de ces modes sur le dilai de production est ditailli ` la page Conditions de Paiement. Livraisons Les dilais de livraisons sont toujours donnis ` titre indicatif et ne peuvent en aucun cas jtre considiris comme iliments contractuels. Ils sont exprimis en jours ouvrables. Propriiti intellectuelle Le client garantit possider les droits de propriiti intellectuelle des iliments (visuels, logo, slogans, etc.) quil nous transmet et qui sont nicessaires ` la reproduction de l'image ainsi que les iventuelles autorisations requises pour son placement. Il demeure seul responsable de l'acquittement des taxes iventuellement giniries par la rialisation de son projet. </pre> VEDI - Express 2012-03-13T20:08:02 http://permalink.gmane.org/gmane.os.openbsd.x11/467 <pre>Dij` disponible 2 jours aprhs la commande Impression HD - encres risistantes aux UV 4 supports d'impression au choix 8 finitions (oeillets, renforts du bord, etc) Upload immidiat de vos fichiers ou transfert diffiri Commandez online en 5 minutes BILITE INDOOR/ BILITE OUTDOOR Structures auto-portantes de tension de toile destinies ` l'usage intirieur ou extirieur. Construction en aluminium. 14 modhles disponibles. Utilisation en recto ou en recto verso. Installation en 1 heure ` 1 personne en intirieur et ` 2 personnes en extirieur. STOP-TROTTOIRS Plusieurs modhles disponibles. Lestage du pied pour une grande risistance au vent. 2 roulettes sous le pied facilite le diplacement du dispositif. CHEVALETS Disponible en formats A2 et A1. Assure une communication recto verso. S'installe aisiment. Stabilisi par deux charnihres. VEDI express ) 2002-2012 Rollup, Pop Up, bbches, stands parapluie aux meilleurs prix et dans les meilleurs dilais. Powered by VEDI ne plus recevoir nos newsletters Fichiers acceptis Taille des images : Pour Pop Up 3x3m : - Image 337,5x222cm : fichier 337,5x222cm Pour Pop Up 4x3m : - Image 405x222cm : fichier 405x222cm Risolutions conseillies: PDF: 80 dpi avec typo vectorisie TIFF ou JPEG: 120 dpi Format des fichiers acceptis : PDF HD, EPS (avec polices et images incorpories et vectorisies), TIFF, JPEG Respect des couleurs : De prifirence, fournir les fichiers en CMYK (noir quadri: C70 M70 Y70 K100). Les fichiers RGB seront convertis. Garanties de qualiti Qualiti d'impression : Impression HD : vos images sont toujours imprimies en haute difinition. Couleurs vivantes et respecties : La gestion des couleurs et la garantie de rendu sont assuriespar notre iquipe d'infographistes et d'imprimeurs professionnels expirimentis. Encres UV risistantes : Les encres utilisies pour l'impression de votre image sont toujours des encres risistantes aux rayons ultra violets. Ces encres de qualiti garantissent une bonne longiviti aux couleurs de votre visuel, pour une image toujours vive. Supports de qualiti : Vos images sont imprimies sur support satini, pour un meilleur rendu des couleurs et des contrastes. D'une ipaisseur de 170 5m ou supirieure, nos supports d'impression vous garantissent une image qui ne gondole pas et offrent une protection contre les griffes et les poussihres. Risistants aux dichirures et ` l'eau, ils peuvent se nettoyer. Images anti-feu : Vos images peuvent jtre imprimies sur support ignifugi B2 / M1 (en option), idial et mjme parfois obligatoire pour les foires et salons. Qualiti : Structure solide : iliments construits en acier peint de section 20cm x 20 cm. Simple ` monter : assemblage sans outil, montage en 30 minutes ` deux personnes. Idial pour la participation ` vos salons grand public ou professionnels. La structure Wave permet de construire des stands dune multitude de dimensions. Les images murales sont fournies roulies avec une barre de suspension intigri (Veclip). Elles se suspendent au montant horizontal supirieur du stand et se diroulent de haut en bas entre les piliers. Leur largeur est de maximum 2 mhtres afin de faciliter le stockage et le transport. Il existe 4 largeurs (50, 100, 150 et 200 cm) et 2 hauteurs (220 cm pour les stands de 2m50 et 290cm pour les stand de 3m20). Mises dos ` dos, elles permettent laffichage recto-verso. Vous choisissez vous-mjme les diffirentes largeurs de sorte de combler complhtement un ctti du stand ou de laisser un passage. La largeur disponible pour limage est igale ` la largeur du stand moins 50 cm. Par exemple: si la largeur du ctti du stand ` fermer est de 5 mhtres, la largeur disponible pour limage est de 450cm. Pour combler cette largeur, vous pouvez commander 2 images de 200cm et 1 image de 50cm. Si la hauteur de votre stand est de 320 cm, vous choisirez une hauteur dimage de 290 cm. Production et livraison : Livraison express : votre stand livri, prjt ` monter en 5 jours ouvrables. Conditions ginirales de ventes Giniralitis Seules les prisentes conditions de vente sont dapplication pour la vente. Ces conditions ginirales s'appliquent ` lexclusion de toutes autres conditions, mjme celles reprises sur des bons de commande imanant de lacheteur. Le vendeur se riserve le droit de modifier ` tout moment ces conditions ginirales. Nianmoins, les commandes en cours restent soumises aux conditions applicables au moment oy la vente a iti conclue. Les photos, illustrations, couleurs et textes associis aux produits repris sur ce site nont pas de caracthre contractuel et de ce fait ne sauraient engager la responsabiliti du vendeur. Toute commande donnera lieu ` une facturation 30 jours aprhs son acceptation dans le cas oy la commande ne peut jtre exicutie en raison d'un retard imputable au client. En cas d'annulation de sa commande, le client sera redevable d'un montant correspondant aux frais dij` exposi, augmenti d'une indemniti de 15 % du montant commandi. La facture sera itablie ` la sociiti de facturation introduite lors de la commande. En cas de demande de changement de sociiti de facturation postirieure ` la commande, une surcharge de EUR 25,HT - sera appliquie pour frais administratifs. Toute marchandise livrie reste la propriiti du vendeur jusqu'au paiement intigral de son prix par l'acheteur. Celui-ci supportera toutefois seul les risques de pertes, de digradations ou de destruction de la chose livrie, dhs le dipart de nos ateliers. La responsabiliti du vendeur est toujours limitie au remplacement de l'image. En cas de retard de livraison, la responsabiliti du vendeur est limitie ` une indemniti forfaitaire de 150 euros ou au montant du prijudice riel subi par le client si celui-ci est moindre. Prix Nos prix sentendent hors taxes et sont exprimis en euros. Les prix de vente des produits sur ce site sont ceux indiquis au moment de lenregistrement de la commande. Sauf avis contraire, les prix de nos produits ne comprennent pas les frais de livraison, qui sont calculis en suppliment ` la fin de la commande selon la destination et/ou le mode de livraison souhaiti. Commande Lors de lenregistrement de la commande, vous jtes tenus de fournir des donnies pricises et exactes notamment quant ` lidentiti du destinataire de la commande, aux informations relatives ` la TVA, ` ladresse de livraison, et ` ladresse email oy une confirmation de commande peut jtre adressie. Une fois le processus de commande achevi, vous navez plus la possibiliti de renoncer ` celle-ci. Paiement Les diffirents modes de paiement autorisis, ainsi que l'implication de ces modes sur le dilai de production est ditailli ` la page Conditions de Paiement. Livraisons Les dilais de livraisons sont toujours donnis ` titre indicatif et ne peuvent en aucun cas jtre considiris comme iliments contractuels. Ils sont exprimis en jours ouvrables. Propriiti intellectuelle Le client garantit possider les droits de propriiti intellectuelle des iliments (visuels, logo, slogans, etc.) quil nous transmet et qui sont nicessaires ` la reproduction de l'image ainsi que les iventuelles autorisations requises pour son placement. Il demeure seul responsable de l'acquittement des taxes iventuellement giniries par la rialisation de son projet. </pre> VEDI - Express 2012-02-21T17:03:19 http://permalink.gmane.org/gmane.os.openbsd.x11/466 <pre>Hi, On my work desktop (amd64) I am seeing the following message printed several times a second on the console: (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Device busy I first noticed this about a week and a half ago. Yesterdy morning I upgraded my snapshot to the 2nd feb kernel + userland and the Jan 26th xenocara sets (from ftp.fr.openbsd.org) and the problem still exists here. What follows is a dmesg and Xorg.0.log: OpenBSD 5.1-beta (GENERIC.MP) #196: Thu Feb 2 02:20:47 MST 2012 deraadt&lt; at &gt;amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 11&lt;memory_size&gt; real mem = 4121948160 (3930MB) avail mem = 3998064640 (3812MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 &lt; at &gt; 0xf0450 (82 entries) bios0: vendor Dell Inc. version "A03" date 04/29/2009 bios0: Dell Inc. OptiPlex 760 acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET ____ SLIC SSDT SSDT SSDT acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI3(S5) PCI1(S5) PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU E8400 &lt; at &gt; 3.00GHz, 2992.86 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at 332MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU E8400 &lt; at &gt; 3.00GHz, 2992.50 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF cpu1: 6MB 64b/line 16-way L2 cache ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 8 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 3 (PCI4) acpiprt1 at acpi0: bus 1 (PCI2) acpiprt2 at acpi0: bus 2 (PCI3) acpiprt3 at acpi0: bus -1 (PCI1) acpiprt4 at acpi0: bus -1 (PCI5) acpiprt5 at acpi0: bus -1 (PCI6) acpiprt6 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C1, PSS acpicpu1 at acpi0: C1, PSS acpibtn0 at acpi0: VBTN cpu0: Enhanced SpeedStep 2992 MHz: speeds: 3000, 2667, 2333, 2000 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0 at vga1: apic 8 int 16 drm0 at inteldrm0 "Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured "Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 8 int 18 for native-PCI interrupt pciide0: channel 0 ignored (not responding; disabled or no drives?) pciide0: channel 1 ignored (not responding; disabled or no drives?) "Intel Q45 KT" rev 0x03 at pci0 dev 3 function 3 not configured em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: msi, address 00:23:ae:a4:86:04 uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 8 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 8 int 17 uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 8 int 22 ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 8 int 22 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: msi azalia0: codecs: Analog Devices AD1984A audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801JD PCIE" rev 0x02: msi pci2 at ppb1 bus 2 uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 8 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 8 int 17 uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 8 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 8 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2 pci3 at ppb2 bus 3 bktr0 at pci3 dev 2 function 0 "Brooktree BT878" rev 0x02: apic 8 int 18 bktr0: Card has no configuration EEPROM. Cannot determine card make. bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner. radio0 at bktr0 "Brooktree BT878 Audio" rev 0x02 at pci3 dev 2 function 1 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801JD LPC" rev 0x02 pciide1 at pci0 dev 31 function 2 "Intel 82801JD SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 8 int 18 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: &lt;SAMSUNG HD161GJ&gt; wd0: 16-sector PIO, LBA48, 152587MB, 312500000 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 atapiscsi0 at pciide1 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: &lt;TSSTcorp, DVD+-RW TS-H653G, DW10&gt; ATAPI 5/cdrom removable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801JD SMBus" rev 0x02: apic 8 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 pciide2 at pci0 dev 31 function 5 "Intel 82801JD SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic 8 int 18 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec mtrr: Pentium Pro MTRR support uhidev0 at uhub2 port 1 configuration 1 interface 0 "Dell Dell USB Optical Mouse" rev 2.00/43.01 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 uhub8 at uhub7 port 2 "Dell Dell Multimedia Pro Keyboard Hub" rev 1.10/59.00 addr 2 uhidev1 at uhub8 port 1 configuration 1 interface 0 "Dell Dell Multimedia Pro Keyboard" rev 1.10/59.00 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev2 at uhub8 port 1 configuration 1 interface 1 "Dell Dell Multimedia Pro Keyboard" rev 1.10/59.00 addr 3 uhidev2: iclass 3/0, 3 report ids uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0 uhid2 at uhidev2 reportid 3: input=3, output=0, feature=0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (3aac5eaa9291f339.a) swap on wd0b dump on wd0b [1382756.203] (--) checkDevMem: using aperture driver /dev/xf86 [1382756.210] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32) [1382756.266] X.Org X Server 1.11.3 Release Date: 2011-12-16 [1382756.266] X Protocol Version 11, Revision 0 [1382756.266] Build Operating System: OpenBSD 5.1 amd64 [1382756.266] Current Operating System: OpenBSD edd-i386.kent.ac.uk 5.1 GENERIC.MP#196 amd64 [1382756.266] Build Date: 25 January 2012 06:37:40PM [1382756.266] [1382756.266] Current version of pixman: 0.22.2 [1382756.266] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [1382756.266] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [1382756.266] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 6 11:27:30 2012 [1382756.297] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [1382756.327] (==) No Layout section. Using the first Screen section. [1382756.327] (==) No screen section available. Using defaults. [1382756.327] (**) |--&gt;Screen "Default Screen Section" (0) [1382756.327] (**) | |--&gt;Monitor "&lt;default monitor&gt;" [1382756.327] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [1382756.327] (==) Disabling SIGIO handlers for input devices [1382756.327] (==) Automatically adding devices [1382756.327] (==) Automatically enabling devices [1382756.468] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [1382756.468] (==) ModulePath set to "/usr/X11R6/lib/modules" [1382756.468] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [1382756.468] (II) Loader magic: 0x79e020 [1382756.468] (II) Module ABI versions: [1382756.468] X.Org ANSI C Emulation: 0.4 [1382756.468] X.Org Video Driver: 11.0 [1382756.468] X.Org XInput driver : 13.0 [1382756.468] X.Org Server Extension : 6.0 [1382756.469] (--) PCI:*(0:0:2:0) 8086:2e12:1028:027f rev 3, Mem &lt; at &gt; 0xfe800000/4194304, 0xc0000000/268435456, I/O &lt; at &gt; 0x0000ec90/8 [1382756.469] (--) PCI: (0:0:2:1) 8086:2e13:1028:027f rev 3, Mem &lt; at &gt; 0xfe700000/1048576 [1382756.469] (--) PCI: (0:3:2:0) 109e:036e:0000:0000 rev 2, Mem &lt; at &gt; 0xd0001000/4096 [1382756.469] (II) LoadModule: "extmod" [1382756.493] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so [1382756.495] (II) Module extmod: vendor="X.Org Foundation" [1382756.495] compiled for 1.11.3, module version = 1.0.0 [1382756.495] Module class: X.Org Server Extension [1382756.495] ABI class: X.Org Server Extension, version 6.0 [1382756.495] (II) Loading extension MIT-SCREEN-SAVER [1382756.495] (II) Loading extension XFree86-VidModeExtension [1382756.495] (II) Loading extension XFree86-DGA [1382756.495] (II) Loading extension DPMS [1382756.495] (II) Loading extension XVideo [1382756.495] (II) Loading extension XVideo-MotionCompensation [1382756.495] (II) Loading extension X-Resource [1382756.495] (II) LoadModule: "dbe" [1382756.495] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so [1382756.515] (II) Module dbe: vendor="X.Org Foundation" [1382756.515] compiled for 1.11.3, module version = 1.0.0 [1382756.515] Module class: X.Org Server Extension [1382756.515] ABI class: X.Org Server Extension, version 6.0 [1382756.515] (II) Loading extension DOUBLE-BUFFER [1382756.515] (II) LoadModule: "glx" [1382756.515] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [1382756.524] (II) Module glx: vendor="X.Org Foundation" [1382756.524] compiled for 1.11.3, module version = 1.0.0 [1382756.524] ABI class: X.Org Server Extension, version 6.0 [1382756.525] (==) AIGLX enabled [1382756.525] (II) Loading extension GLX [1382756.525] (II) LoadModule: "record" [1382756.525] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so [1382756.547] (II) Module record: vendor="X.Org Foundation" [1382756.547] compiled for 1.11.3, module version = 1.13.0 [1382756.547] Module class: X.Org Server Extension [1382756.547] ABI class: X.Org Server Extension, version 6.0 [1382756.547] (II) Loading extension RECORD [1382756.547] (II) LoadModule: "dri" [1382756.548] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so [1382756.573] (II) Module dri: vendor="X.Org Foundation" [1382756.573] compiled for 1.11.3, module version = 1.0.0 [1382756.573] ABI class: X.Org Server Extension, version 6.0 [1382756.573] (II) Loading extension XFree86-DRI [1382756.574] (II) LoadModule: "dri2" [1382756.574] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so [1382756.586] (II) Module dri2: vendor="X.Org Foundation" [1382756.586] compiled for 1.11.3, module version = 1.2.0 [1382756.586] ABI class: X.Org Server Extension, version 6.0 [1382756.586] (II) Loading extension DRI2 [1382756.586] (==) Matched intel as autoconfigured driver 0 [1382756.586] (==) Matched vesa as autoconfigured driver 1 [1382756.586] (==) Assigned the driver to the xf86ConfigLayout [1382756.586] (II) LoadModule: "intel" [1382756.586] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so [1382756.596] (II) Module intel: vendor="X.Org Foundation" [1382756.597] compiled for 1.11.3, module version = 2.12.0 [1382756.597] Module class: X.Org Video Driver [1382756.597] ABI class: X.Org Video Driver, version 11.0 [1382756.609] (II) LoadModule: "vesa" [1382756.610] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so [1382756.624] (II) Module vesa: vendor="X.Org Foundation" [1382756.624] compiled for 1.11.3, module version = 2.3.0 [1382756.624] Module class: X.Org Video Driver [1382756.624] ABI class: X.Org Video Driver, version 11.0 [1382756.624] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server [1382756.624] (II) VESA: driver for VESA chipsets: vesa [1382756.624] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so [1382756.624] (WW) Falling back to old probe method for vesa [1382756.624] (II) Loading sub module "vgahw" [1382756.624] (II) LoadModule: "vgahw" [1382756.650] (II) Loading /usr/X11R6/lib/modules/libvgahw.so [1382756.665] (II) Module vgahw: vendor="X.Org Foundation" [1382756.665] compiled for 1.11.3, module version = 0.1.0 [1382756.665] ABI class: X.Org Video Driver, version 11.0 [1382756.665] (II) Loading sub module "ramdac" [1382756.665] (II) LoadModule: "ramdac" [1382756.665] (II) Module "ramdac" already built-in [1382756.665] drmOpenDevice: node name is /dev/drm0 [1382756.666] drmOpenDevice: open result is 10, (OK) [1382756.666] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [1382756.666] drmOpenDevice: node name is /dev/drm0 [1382756.666] drmOpenDevice: open result is 10, (OK) [1382756.666] drmOpenByBusid: drmOpenMinor returns 10 [1382756.666] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [1382756.666] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [1382756.666] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [1382756.666] (==) intel(0): RGB weight 888 [1382756.666] (==) intel(0): Default visual is TrueColor [1382756.666] (II) intel(0): Integrated Graphics Chipset: Intel(R) Q45/Q43 [1382756.666] (--) intel(0): Chipset: "Q45/Q43" [1382756.666] (--) intel(0): Linear framebuffer at 0xC0000000 [1382756.666] (--) intel(0): IO registers at addr 0xFE800000 size 4194304 [1382756.666] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB [1382756.667] (II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port [1382756.690] (II) intel(0): 2 display pipes available. [1382756.690] (II) Loading sub module "ddc" [1382756.690] (II) LoadModule: "ddc" [1382756.690] (II) Module "ddc" already built-in [1382756.690] (II) Loading sub module "i2c" [1382756.690] (II) LoadModule: "i2c" [1382756.690] (II) Module "i2c" already built-in [1382756.701] (II) intel(0): Output VGA has no monitor section [1382756.701] xf86TokenToOptinfo: table is NULL [1382756.711] (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. [1382756.711] (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. [1382756.839] (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. [1382756.867] (II) intel(0): Output TMDS-1 has no monitor section [1382756.884] (II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz [1382756.884] (II) intel(0): SDVOB: 1 input channel [1382756.884] (II) intel(0): SDVOB: TMDS0 output reported [1382756.884] xf86TokenToOptinfo: table is NULL [1382756.884] (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. [1382756.884] (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. [1382756.884] (II) intel(0): No SDVO device found on SDVOC [1382756.884] (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. [1382756.884] (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. [1382756.890] (II) intel(0): Current clock rate multiplier: 8 [1382756.989] (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear [1382757.040] (II) intel(0): I2C bus "CRTDDC_A" initialized. [1382757.051] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. [1382757.099] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. [1382757.099] (II) intel(0): I2C bus "CRTDDC_A" removed. [1382757.099] (II) intel(0): EDID for output VGA [1382757.099] (II) intel(0): Manufacturer: DEL Model: a028 Serial#: 809915987 [1382757.099] (II) intel(0): Year: 2007 Week: 21 [1382757.099] (II) intel(0): EDID Version: 1.3 [1382757.099] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [1382757.099] (II) intel(0): Sync: Separate [1382757.099] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30 [1382757.099] (II) intel(0): Gamma: 2.20 [1382757.099] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [1382757.099] (II) intel(0): Default color space is primary color space [1382757.099] (II) intel(0): First detailed timing is preferred mode [1382757.099] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [1382757.099] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 [1382757.099] (II) intel(0): Supported established timings: [1382757.099] (II) intel(0): 720x400&lt; at &gt;70Hz [1382757.099] (II) intel(0): 640x480&lt; at &gt;60Hz [1382757.099] (II) intel(0): 640x480&lt; at &gt;75Hz [1382757.099] (II) intel(0): 800x600&lt; at &gt;60Hz [1382757.099] (II) intel(0): 800x600&lt; at &gt;75Hz [1382757.099] (II) intel(0): 1024x768&lt; at &gt;60Hz [1382757.099] (II) intel(0): 1024x768&lt; at &gt;75Hz [1382757.099] (II) intel(0): 1280x1024&lt; at &gt;75Hz [1382757.099] (II) intel(0): Manufacturer's mask: 0 [1382757.099] (II) intel(0): Supported standard timings: [1382757.099] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [1382757.099] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [1382757.099] (II) intel(0): Supported detailed timing: [1382757.099] (II) intel(0): clock: 108.0 MHz Image Size: 376 x 301 mm [1382757.099] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [1382757.099] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [1382757.099] (II) intel(0): Serial No: HU18375P0FVS [1382757.099] (II) intel(0): Monitor name: DELL E198FP [1382757.099] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 145 MHz [1382757.099] (II) intel(0): EDID (in hex): [1382757.099] (II) intel(0): 00ffffffffffff0010ac28a053564630 [1382757.099] (II) intel(0): 1511010368261e78eeee91a3544c9926 [1382757.099] (II) intel(0): 0f5054a54b00714f8180010101010101 [1382757.099] (II) intel(0): 010101010101302a009851002a403070 [1382757.099] (II) intel(0): 1300782d1100001e000000ff00485531 [1382757.099] (II) intel(0): 3833373550304656530a000000fc0044 [1382757.099] (II) intel(0): 454c4c204531393846500a20000000fd [1382757.099] (II) intel(0): 00384c1f530e000a2020202020200036 [1382757.099] (II) intel(0): EDID vendor "DEL", prod id 41000 [1382757.116] (II) intel(0): Using EDID range info for horizontal sync [1382757.116] (II) intel(0): Using EDID range info for vertical refresh [1382757.116] (II) intel(0): Printing DDC gathered Modelines: [1382757.116] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [1382757.116] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [1382757.116] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [1382757.116] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [1382757.116] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [1382757.116] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [1382757.116] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [1382757.116] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [1382757.116] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [1382757.116] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [1382757.116] (II) intel(0): EDID vendor "DEL", prod id 41000 [1382757.116] (II) intel(0): Printing probed modes for output VGA [1382757.116] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [1382757.116] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [1382757.116] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [1382757.116] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [1382757.116] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [1382757.116] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [1382757.116] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [1382757.116] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [1382757.116] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [1382757.116] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [1382757.124] (II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0. [1382757.127] (II) intel(0): I2C device "SDVOB DDC Bus:E-EDID segment register" registered at address 0x60. [1382757.234] (II) intel(0): EDID for output TMDS-1 [1382757.234] (II) intel(0): Manufacturer: DEL Model: 404e Serial#: 858801219 [1382757.234] (II) intel(0): Year: 2009 Week: 23 [1382757.234] (II) intel(0): EDID Version: 1.3 [1382757.234] (II) intel(0): Digital Display Input [1382757.234] (II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30 [1382757.234] (II) intel(0): Gamma: 2.20 [1382757.234] (II) intel(0): DPMS capabilities: StandBy Suspend Off [1382757.234] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [1382757.234] (II) intel(0): Default color space is primary color space [1382757.234] (II) intel(0): First detailed timing is preferred mode [1382757.234] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [1382757.234] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [1382757.234] (II) intel(0): Supported established timings: [1382757.234] (II) intel(0): 720x400&lt; at &gt;70Hz [1382757.234] (II) intel(0): 640x480&lt; at &gt;60Hz [1382757.234] (II) intel(0): 640x480&lt; at &gt;75Hz [1382757.234] (II) intel(0): 800x600&lt; at &gt;60Hz [1382757.234] (II) intel(0): 800x600&lt; at &gt;75Hz [1382757.234] (II) intel(0): 1024x768&lt; at &gt;60Hz [1382757.234] (II) intel(0): 1024x768&lt; at &gt;75Hz [1382757.234] (II) intel(0): 1280x1024&lt; at &gt;75Hz [1382757.234] (II) intel(0): Manufacturer's mask: 0 [1382757.234] (II) intel(0): Supported standard timings: [1382757.234] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [1382757.234] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [1382757.234] (II) intel(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [1382757.234] (II) intel(0): Supported detailed timing: [1382757.234] (II) intel(0): clock: 119.0 MHz Image Size: 474 x 296 mm [1382757.234] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0 [1382757.234] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0 [1382757.234] (II) intel(0): Serial No: W416K96230DC [1382757.234] (II) intel(0): Monitor name: DELL P2210 [1382757.234] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz [1382757.234] (II) intel(0): EDID (in hex): [1382757.234] (II) intel(0): 00ffffffffffff0010ac4e4043443033 [1382757.234] (II) intel(0): 17130103802f1e78eeee95a3544c9926 [1382757.234] (II) intel(0): 0f5054a54b00714f8180b30001010101 [1382757.234] (II) intel(0): 0101010101017c2e90a0601a1e403020 [1382757.234] (II) intel(0): 3600da281100001a000000ff00573431 [1382757.234] (II) intel(0): 364b393632333044430a000000fc0044 [1382757.234] (II) intel(0): 454c4c2050323231300a2020000000fd [1382757.234] (II) intel(0): 00384b1e5310000a202020202020002e [1382757.234] (II) intel(0): EDID vendor "DEL", prod id 16462 [1382757.241] (II) intel(0): Printing probed modes for output TMDS-1 [1382757.242] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) [1382757.242] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [1382757.242] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [1382757.242] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [1382757.242] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [1382757.242] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [1382757.242] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [1382757.242] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [1382757.242] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [1382757.242] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [1382757.242] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [1382757.242] (II) intel(0): Output VGA connected [1382757.242] (II) intel(0): Output TMDS-1 connected [1382757.242] (II) intel(0): Using exact sizes for initial modes [1382757.242] (II) intel(0): Output VGA using initial mode 1280x1024 [1382757.242] (II) intel(0): Output TMDS-1 using initial mode 1280x1024 [1382757.242] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [1382757.923] (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear [1382757.946] (II) intel(0): detected 512 kB GTT. [1382757.946] (II) intel(0): detected 32764 kB stolen memory. [1382757.946] (==) intel(0): video overlay key set to 0x101fe [1382757.946] (**) intel(0): Display dimensions: (380, 300) mm [1382757.946] (**) intel(0): DPI set to (85, 86) [1382757.946] (II) Loading sub module "fb" [1382757.946] (II) LoadModule: "fb" [1382757.947] (II) Loading /usr/X11R6/lib/modules/libfb.so [1382757.971] (II) Module fb: vendor="X.Org Foundation" [1382757.971] compiled for 1.11.3, module version = 1.0.0 [1382757.971] ABI class: X.Org ANSI C Emulation, version 0.4 [1382757.971] (II) UnloadModule: "vesa" [1382757.971] (II) Unloading vesa [1382757.971] (==) Depth 24 pixmap format is 32 bpp [1382757.971] (II) intel(0): Kernel reported 1006592 total, 0 used [1382757.971] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available [1382757.971] (II) intel(0): [DRI2] Setup complete [1382757.971] (II) intel(0): [DRI2] DRI driver: i965 [1382757.971] (**) intel(0): Framebuffer tiled [1382757.971] (**) intel(0): Pixmaps tiled [1382757.971] (**) intel(0): 3D buffers tiled [1382757.971] (**) intel(0): SwapBuffers wait enabled [1382757.974] (==) intel(0): VideoRam: 262144 KB [1382757.975] (II) intel(0): Allocated new frame buffer 1280x1024 stride 5120, tiled [1382758.009] (II) intel(0): vgaHWGetIOBase: hwp-&gt;IOBase is 0x03d0, hwp-&gt;PIOOffset is 0x0000 [1382758.009] (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear [1382758.016] (II) UXA(0): Driver registered support for the following operations: [1382758.016] (II) solid [1382758.016] (II) copy [1382758.016] (II) composite (RENDER acceleration) [1382758.016] (II) put_image [1382758.016] (II) get_image [1382758.016] (==) intel(0): Backing store disabled [1382758.016] (==) intel(0): Silken mouse disabled [1382758.017] (II) intel(0): Initializing HW Cursor [1382758.022] (II) intel(0): Current clock rate multiplier: 8 [1382758.437] (II) intel(0): Fixed memory allocation layout: [1382758.437] (II) intel(0): 0x01fff000: end of stolen memory [1382758.437] (II) intel(0): 0x01fff000-0x0fffffff: DRI memory manager (229380 kB) [1382758.437] (II) intel(0): 0x10000000: end of aperture [1382758.437] (II) intel(0): BO memory allocation layout: [1382758.437] (II) intel(0): 0x01fff000: start of memory manager [1382758.437] (II) intel(0): 0x02776000-0x0277ffff: HW cursors (40 kB) [1382758.437] (II) intel(0): 0x10000000: end of memory manager [1382758.620] is crt [1382759.122] (II) intel(0): Output configuration: [1382759.122] (II) intel(0): Pipe A is on [1382759.122] (II) intel(0): Display plane A is now enabled and connected to pipe A. [1382759.122] (II) intel(0): Pipe B is on [1382759.122] (II) intel(0): Display plane B is now enabled and connected to pipe B. [1382759.122] (II) intel(0): Output VGA is connected to pipe A [1382759.122] (II) intel(0): Output TMDS-1 is connected to pipe B [1382759.122] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [1382759.124] (==) intel(0): DPMS enabled [1382759.124] (==) intel(0): Intel XvMC decoder enabled [1382759.124] (II) intel(0): Set up textured video [1382759.124] (II) intel(0): [XvMC] xvmc_vld driver initialized. [1382759.124] (II) intel(0): direct rendering: DRI2 Enabled [1382759.124] (--) RandR disabled [1382759.124] (II) Initializing built-in extension Generic Event Extension [1382759.124] (II) Initializing built-in extension SHAPE [1382759.124] (II) Initializing built-in extension MIT-SHM [1382759.124] (II) Initializing built-in extension XInputExtension [1382759.124] (II) Initializing built-in extension XTEST [1382759.124] (II) Initializing built-in extension BIG-REQUESTS [1382759.124] (II) Initializing built-in extension SYNC [1382759.124] (II) Initializing built-in extension XKEYBOARD [1382759.124] (II) Initializing built-in extension XC-MISC [1382759.124] (II) Initializing built-in extension SECURITY [1382759.124] (II) Initializing built-in extension XINERAMA [1382759.124] (II) Initializing built-in extension XFIXES [1382759.124] (II) Initializing built-in extension RENDER [1382759.124] (II) Initializing built-in extension RANDR [1382759.124] (II) Initializing built-in extension COMPOSITE [1382759.124] (II) Initializing built-in extension DAMAGE [1382759.289] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [1382759.289] (II) AIGLX: enabled GLX_INTEL_swap_event [1382759.289] (II) AIGLX: enabled GLX_SGI_make_current_read [1382759.289] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [1382759.289] (II) AIGLX: Loaded and initialized i965 [1382759.289] (II) GLX: Initialized DRI2 GL provider for screen 0 [1382759.304] (II) intel(0): Setting screen physical size to 338 x 270 [1382759.951] (II) config/wscons: checking input device /dev/wskbd [1382759.951] (II) wskbd: using layout gb [1382759.951] (II) LoadModule: "kbd" [1382759.951] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [1382759.966] (II) Module kbd: vendor="X.Org Foundation" [1382759.966] compiled for 1.11.3, module version = 1.6.1 [1382759.966] Module class: X.Org XInput Driver [1382759.966] ABI class: X.Org XInput driver, version 13.0 [1382759.966] (II) Using input driver 'kbd' for '/dev/wskbd' [1382759.966] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [1382759.967] (**) /dev/wskbd: always reports core events [1382759.967] (**) /dev/wskbd: always reports core events [1382759.967] (**) Option "Protocol" "standard" [1382759.967] (**) Option "XkbRules" "base" [1382759.967] (**) Option "XkbModel" "pc105" [1382759.967] (**) Option "XkbLayout" "gb" [1382759.967] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6) [1382760.238] (II) config/wscons: checking input device /dev/wsmouse [1382760.238] (II) LoadModule: "ws" [1382760.239] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [1382760.247] (II) Module ws: vendor="X.Org Foundation" [1382760.247] compiled for 1.11.3, module version = 1.3.0 [1382760.247] Module class: X.Org XInput Driver [1382760.247] ABI class: X.Org XInput driver, version 13.0 [1382760.247] (II) Using input driver 'ws' for '/dev/wsmouse' [1382760.247] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [1382760.247] (**) /dev/wsmouse: always reports core events [1382760.247] (II) ws: /dev/wsmouse: debuglevel 0 [1382760.247] (**) Option "Device" "/dev/wsmouse" [1382760.247] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 [1382760.247] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 [1382760.247] (**) ws: /dev/wsmouse: associated screen: 0 [1382760.247] (II) ws: /dev/wsmouse: minimum x position: 0 [1382760.247] (II) ws: /dev/wsmouse: maximum x position: 1279 [1382760.247] (II) ws: /dev/wsmouse: minimum y position: 0 [1382760.247] (II) ws: /dev/wsmouse: maximum y position: 1023 [1382760.247] (==) ws: /dev/wsmouse: Buttons: 7 [1382760.278] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 [1382760.278] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7) [1382760.278] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 [1382760.278] (**) /dev/wsmouse: (accel) acceleration profile 0 [1382760.278] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 [1382760.278] (**) /dev/wsmouse: (accel) acceleration threshold: 4 [1382767.927] (II) intel(0): I2C bus "CRTDDC_A" initialized. [1382767.927] (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. [1382767.976] (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. [1382767.976] (II) intel(0): I2C bus "CRTDDC_A" removed. [1382767.976] (II) intel(0): EDID vendor "DEL", prod id 41000 [1382767.976] (II) intel(0): Using hsync ranges from config file [1382767.976] (II) intel(0): Using vrefresh ranges from config file [1382767.976] (II) intel(0): Printing DDC gathered Modelines: [1382767.976] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [1382767.976] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [1382767.976] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [1382767.976] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [1382767.976] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [1382767.976] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [1382767.976] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [1382767.976] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [1382767.976] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [1382767.976] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [1382767.976] (II) intel(0): EDID vendor "DEL", prod id 41000 [1382768.094] (II) intel(0): EDID vendor "DEL", prod id 16462 [1382768.102] (II) intel(0): Allocated new frame buffer 3008x1050 stride 12288, tiled [1382768.148] (II) intel(0): New front buffer at 0x3398000 [1465077.231] (II) AIGLX: Suspending AIGLX clients for VT switch [1465078.061] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Device busy. [1465078.062] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Device busy. [1465078.111] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Device busy. [1465078.161] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Device busy. [1465078.211] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: Device busy. ... Hopefully that is enough info. PIng me for anything else you might need. Cheers </pre> Edd Barrett 2012-02-07T23:44:25 http://permalink.gmane.org/gmane.os.openbsd.x11/465 <pre>LE VRAI ROLLUP ORIGINAL &lt; at &gt; PARTIR DE 49 ht : IMPRESSION HD INCLUSE 7 MODHLES DISPONIBLES MONTAGE ULTRA RAPIDE DISPOSITIF GARANTI HOUSSE DE TRANSPORT DOUBLIE DIJ&lt; at &gt; DISPONIBLE 2 JOURS APRHS LA COMMANDE LE VRAI ROLLUP ! VOUS AUSSI, FAITES CONFIANCE &lt; at &gt; VEDI-EXPRESS ! POP-UP Stand parapluie courbe. Valise de transport rigide avec roulettes et personnalisable (tablette et image de comptoir en option). Idial pour la promotion sur point de vente, stands, showroom,... Installation par une personne (10 minutes chrono). A partir de 690 eur (prix htva). COMPTOIRS Structures flexibles pour un montage aisi en moins de 2 minutes. Fournis avec sac de transport. Image au choix (vendue siparement). A partir de 122 eur (prix htva) . PORTE-BROCHURES 5 modhles de stock. Finitions en acier chromi ou en alu. Ricepteurs rigides ou souples. Repliables. Sac de transport inclus. A partir de 39 eur (prix htva). VEDI express ) 2002-2012 Rollup, Pop Up, bbches, stands parapluie aux meilleurs prix et dans les meilleurs dilais. Powered by VEDI ne plus recevoir nos newsletters Fichiers acceptis Taille des images : Pour Pop Up 3x3m : - Image 337,5x222cm : fichier 337,5x222cm Pour Pop Up 4x3m : - Image 405x222cm : fichier 405x222cm Risolutions conseillies: PDF: 80 dpi avec typo vectorisie TIFF ou JPEG: 120 dpi Format des fichiers acceptis : PDF HD, EPS (avec polices et images incorpories et vectorisies), TIFF, JPEG Respect des couleurs : De prifirence, fournir les fichiers en CMYK (noir quadri: C70 M70 Y70 K100). Les fichiers RGB seront convertis. Garanties de qualiti Qualiti d'impression : Impression HD : vos images sont toujours imprimies en haute difinition. Couleurs vivantes et respecties : La gestion des couleurs et la garantie de rendu sont assuriespar notre iquipe d'infographistes et d'imprimeurs professionnels expirimentis. Encres UV risistantes : Les encres utilisies pour l'impression de votre image sont toujours des encres risistantes aux rayons ultra violets. Ces encres de qualiti garantissent une bonne longiviti aux couleurs de votre visuel, pour une image toujours vive. Supports de qualiti : Vos images sont imprimies sur support satini, pour un meilleur rendu des couleurs et des contrastes. D'une ipaisseur de 170 5m ou supirieure, nos supports d'impression vous garantissent une image qui ne gondole pas et offrent une protection contre les griffes et les poussihres. Risistants aux dichirures et ` l'eau, ils peuvent se nettoyer. Images anti-feu : Vos images peuvent jtre imprimies sur support ignifugi B2 / M1 (en option), idial et mjme parfois obligatoire pour les foires et salons. Qualiti : Structure solide : iliments construits en acier peint de section 20cm x 20 cm. Simple ` monter : assemblage sans outil, montage en 30 minutes ` deux personnes. Idial pour la participation ` vos salons grand public ou professionnels. La structure Wave permet de construire des stands dune multitude de dimensions. Les images murales sont fournies roulies avec une barre de suspension intigri (Veclip). Elles se suspendent au montant horizontal supirieur du stand et se diroulent de haut en bas entre les piliers. Leur largeur est de maximum 2 mhtres afin de faciliter le stockage et le transport. Il existe 4 largeurs (50, 100, 150 et 200 cm) et 2 hauteurs (220 cm pour les stands de 2m50 et 290cm pour les stand de 3m20). Mises dos ` dos, elles permettent laffichage recto-verso. Vous choisissez vous-mjme les diffirentes largeurs de sorte de combler complhtement un ctti du stand ou de laisser un passage. La largeur disponible pour limage est igale ` la largeur du stand moins 50 cm. Par exemple: si la largeur du ctti du stand ` fermer est de 5 mhtres, la largeur disponible pour limage est de 450cm. Pour combler cette largeur, vous pouvez commander 2 images de 200cm et 1 image de 50cm. Si la hauteur de votre stand est de 320 cm, vous choisirez une hauteur dimage de 290 cm. Production et livraison : Livraison express : votre stand livri, prjt ` monter en 5 jours ouvrables. Conditions ginirales de ventes Giniralitis Seules les prisentes conditions de vente sont dapplication pour la vente. Ces conditions ginirales s'appliquent ` lexclusion de toutes autres conditions, mjme celles reprises sur des bons de commande imanant de lacheteur. Le vendeur se riserve le droit de modifier ` tout moment ces conditions ginirales. Nianmoins, les commandes en cours restent soumises aux conditions applicables au moment oy la vente a iti conclue. Les photos, illustrations, couleurs et textes associis aux produits repris sur ce site nont pas de caracthre contractuel et de ce fait ne sauraient engager la responsabiliti du vendeur. Toute commande donnera lieu ` une facturation 30 jours aprhs son acceptation dans le cas oy la commande ne peut jtre exicutie en raison d'un retard imputable au client. En cas d'annulation de sa commande, le client sera redevable d'un montant correspondant aux frais dij` exposi, augmenti d'une indemniti de 15 % du montant commandi. La facture sera itablie ` la sociiti de facturation introduite lors de la commande. En cas de demande de changement de sociiti de facturation postirieure ` la commande, une surcharge de EUR 25,HT - sera appliquie pour frais administratifs. Toute marchandise livrie reste la propriiti du vendeur jusqu'au paiement intigral de son prix par l'acheteur. Celui-ci supportera toutefois seul les risques de pertes, de digradations ou de destruction de la chose livrie, dhs le dipart de nos ateliers. La responsabiliti du vendeur est toujours limitie au remplacement de l'image. En cas de retard de livraison, la responsabiliti du vendeur est limitie ` une indemniti forfaitaire de 150 euros ou au montant du prijudice riel subi par le client si celui-ci est moindre. Prix Nos prix sentendent hors taxes et sont exprimis en euros. Les prix de vente des produits sur ce site sont ceux indiquis au moment de lenregistrement de la commande. Sauf avis contraire, les prix de nos produits ne comprennent pas les frais de livraison, qui sont calculis en suppliment ` la fin de la commande selon la destination et/ou le mode de livraison souhaiti. Commande Lors de lenregistrement de la commande, vous jtes tenus de fournir des donnies pricises et exactes notamment quant ` lidentiti du destinataire de la commande, aux informations relatives ` la TVA, ` ladresse de livraison, et ` ladresse email oy une confirmation de commande peut jtre adressie. Une fois le processus de commande achevi, vous navez plus la possibiliti de renoncer ` celle-ci. Paiement Les diffirents modes de paiement autorisis, ainsi que l'implication de ces modes sur le dilai de production est ditailli ` la page Conditions de Paiement. Livraisons Les dilais de livraisons sont toujours donnis ` titre indicatif et ne peuvent en aucun cas jtre considiris comme iliments contractuels. Ils sont exprimis en jours ouvrables. Propriiti intellectuelle Le client garantit possider les droits de propriiti intellectuelle des iliments (visuels, logo, slogans, etc.) quil nous transmet et qui sont nicessaires ` la reproduction de l'image ainsi que les iventuelles autorisations requises pour son placement. Il demeure seul responsable de l'acquittement des taxes iventuellement giniries par la rialisation de son projet. </pre> VEDI - Express 2012-01-31T09:36:22 http://permalink.gmane.org/gmane.os.openbsd.x11/464 <pre>6 MODELES DE STOCK MONTAGE RAPIDE ET SIMPLE A UNE PERSONNE RECTO VERSO: CADRES V-CLIC EN ALUMINIUM ANODISE AFFICHES IMPRIMEES SUR POLYPROPYLENE (EN OPTION) FORMATS A2, A1, B1, A0 ENVOYE SOUS 24H Commandez avant le 31/01 et recevez 15% de riduction sur vos STOP-TROTTOIRS ! CODE (Bon de riduction): GOSTOP VOS BACHES SUR MESURE Vos bbches sur mesure imprimies en HD. Plusieurs finitions et supports d'impression au choix. A partir de 9,92 eur / m2 (prix htva). STANDS Optez pour une configuration standard POP-UP, ou criez votre stand WAVE. A partir de 690 eur (prix htva) . ROLLUP 8 modhles diffirents. Impression sur polypropylhne. Eclairage en option. A partir de 44 eur (prix htva). VEDI express ) 2002-2012 Rollup, Pop Up, bbches, stands parapluie aux meilleurs prix et dans les meilleurs dilais. Powered by VEDI ne plus recevoir nos newsletters </pre> VEDI - Express 2012-01-11T05:36:56 http://permalink.gmane.org/gmane.os.openbsd.x11/463 <pre>Come parte delle nostre misure di sicurezza, regolarmente l'attivit` dello schermo del sistema. Di recente abbiamo contattata dopo aver notato un problema sul vostro conto. Abbiamo chiesto informazioni su di voi per il seguente motivo: Abbiamo osservato l'attivit` in questo conto del fatto che h insolito o potenzialmente ad alto rischio. Cliente ID: 581-125-883-POS Si prega di scaricare il modulo allegato a questo messaggio e aprirlo in un browser web. Una volta aperto, vi verr` fornito con misure volte a ripristinare l'accesso all'account. Ti ringraziamo per la vostra comprensione mentre lavoriamo per garantire la sicurezza del conto. Cordiali saluti, Poste Italiane Conto Dipartimento. Tutti i diritti riservati. [demime 1.01d removed an attachment of type APPLICATION/DEFANGED which had a name of Poste Italiane - Misure Di Sicurezza.22499DEFANGED-html] </pre> Poste Italiane 2011-12-27T03:34:10 http://permalink.gmane.org/gmane.os.openbsd.x11/462 <pre>Aye ;) Thanks very much Antoine. Roy. On Thu, 2011-11-10 at 09:36 +0100, Antoine Jacoutot wrote: </pre> Roy Stuivenberg 2011-11-10T09:39:00 http://permalink.gmane.org/gmane.os.openbsd.x11/461 <pre> Don't do that, the rc script takes care of it. It's pkg_scripts, not rc_scripts. </pre> Antoine Jacoutot 2011-11-10T08:36:06 http://permalink.gmane.org/gmane.os.openbsd.x11/460 <pre>Hello, I'm having issues with my x-session It spontaneously restarted, and also killed my screen session (irssi) uname -a OpenBSD shadenet.roycs.nl 5.0 GENERIC#0 amd64 Hostname: shadenet.roycs.nl - OS: OpenBSD 5.0/amd64 - CPU: Intel(R) Core(TM)2 Quad CPU Q8200 &lt; at &gt; 2.33GHz, 2331.28 MHzcpu0 - Processes: 89 - Uptime: 7d 49m - Load Average: 0.11 - Memory Usage: 523.86MB/2046.50MB (25.60%) - Disk Usage: 53.58GB/1151.64GB (4.65%) In my /var/log/messages i found : Nov 9 22:50:05 shadenet gnome-session[26100]: WARNING: Could not connect to ConsoleKit: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Nov 10 00:43:53 shadenet gnome-session[26100]: WARNING: Could not connect to ConsoleKit: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Nov 10 00:49:27 shadenet gnome-session[26100]: WARNING: Could not connect to ConsoleKit: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Nov 10 03:36:57 shadenet gnome-session[26100]: WARNING: Could not connect to ConsoleKit: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Nov 10 03:42:31 shadenet gnome-session[26100]: WARNING: Could not connect to ConsoleKit: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Nov 10 03:42:39 shadenet gdm-binary[27565]: WARNING: gdm_slave_xioerror_handler: Fatal X error - Restarting :0 Nov 10 07:17:09 shadenet gdmgreeter[23364]: Gtk-CRITICAL: IA__gtk_tree_model_get_iter_first: assertion `GTK_IS_TREE_MODEL (tree_model)' failed Nov 10 07:17:15 shadenet gdmgreeter[23364]: Gtk-CRITICAL: IA__gtk_tree_model_get_iter_first: assertion `GTK_IS_TREE_MODEL (tree_model)' failed Nov 10 07:17:18 shadenet ck-launch-session: error connecting to ConsoleKit Nov 10 07:17:18 shadenet gnome-session[20415]: libupower-glib-WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory So i did : # mkdir /var/run/dbus # /etc/rc.d/dbus-daemon start but i believe i did that earlier too. My /etc/rc.local : if [ -x /usr/local/sbin/gdm ]; then echo -n ' gdm'; (sleep 5; /usr/local/sbin/gdm) &amp; fi my /etc/rc.conf.local : ntpd_flags= # enabled during install rc_scripts="dbus_daemon avahi_daemon cupsd gdm" root&lt; at &gt;shadenet dhondub # ls -l /var/run/dbus/system_bus_socket srwxrwxrwx 1 root _dbus 0 Nov 10 07:42 /var/run/dbus/system_bus_socket And # dmesg root&lt; at &gt;shadenet dhondub # dmesg OpenBSD 5.0-stable (GENERIC) #0: Wed Nov 2 13:36:48 CET 2011 dhondub&lt; at &gt;shadenet.roycs.nl:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 2145910784 (2046MB) avail mem = 2074763264 (1978MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 &lt; at &gt; 0xf0710 (62 entries) bios0: vendor American Megatrends Inc. version "1004" date 07/01/2009 bios0: ASUSTeK Computer INC. P5QL PRO acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG OEMB HPET OSFR SSDT acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) PS2K(S4) PS2M(S4) UAR1(S4) EUSB(S4) USBE(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) GBEC(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4) P0P4(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Quad CPU Q8200 &lt; at &gt; 2.33GHz, 2331.28 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 333MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P2) acpiprt2 at acpi0: bus -1 (P0P3) acpiprt3 at acpi0: bus 5 (P0P1) acpiprt4 at acpi0: bus -1 (P0P5) acpiprt5 at acpi0: bus 3 (P0P8) acpiprt6 at acpi0: bus 2 (P0P9) acpiprt7 at acpi0: bus 4 (P0P4) acpicpu0 at acpi0: PSS aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM acpibtn0 at acpi0: PWRB cpu0: Enhanced SpeedStep 2331 MHz: speeds: 2336, 2003 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel G45 Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel G45 PCIE" rev 0x03: msi pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0163 rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 4 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 4 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 4 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 4 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801JI HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC888 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: msi pci2 at ppb1 bus 4 ppb2 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00: msi pci3 at ppb2 bus 3 pciide0 at pci3 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb2: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 4 int 16 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: &lt;ASUS, DRW-1608P3S, 1.19&gt; ATAPI 5/cdrom removable pciide0: channel 1 ignored (not responding; disabled or no drives?) ppb3 at pci0 dev 28 function 5 "Intel 82801JI PCIE" rev 0x00: msi pci4 at ppb3 bus 2 ale0 at pci4 dev 0 function 0 "Attansic Technology L1E" rev 0xb0: AR8121, apic 4 int 17, address 00:24:8c:02:ea:83 atphy0 at ale0 phy 0: F1 10/100/1000 PHY, rev. 9 uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 4 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 4 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 4 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 4 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 pci5 at ppb4 bus 5 rl0 at pci5 dev 0 function 0 "Realtek 8139" rev 0x10: apic 4 int 16, address 00:10:a7:07:ca:98 rlphy0 at rl0 phy 0: RTL internal PHY pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00 pciide1 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 4 int 19 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: &lt;SAMSUNG HD103UJ&gt; wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 wd1 at pciide1 channel 1 drive 0: &lt;WDC WD2500AAJS-22RYA0&gt; wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 4 int 18 iic0 at ichiic0 iic0: addr 0x20 01=80 02=17 03=7f 10=00 19=b0 20=20 21=00 25=20 26=b2 38=74 39=03 4a=64 6a=2c 78=02 79=08 7a=00 7b=00 7e=82 80=00 8b=41 8c=3e 96=e4 99=41 9a=98 9b=01 d0=00 d1=03 d2=72 d3=72 d4=03 d5=02 d6=01 d7=67 d8=61 d9=00 da=00 db=00 dc=00 dd=00 de=00 df=19 e0=00 e1=00 e2=10 e3=10 e4=10 e5=10 e6=10 e7=10 e8=10 e9=10 ea=10 ec=07 ee=00 f1=0b f5=02 f6=02 f9=00 fa=00 fb=50 fc=0f words 00=ffff 01=8037 02=1766 03=7fff 04=ffff 05=ffff 06=ffff 07=ffff spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 pciide2 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic 4 int 19 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lm0 at isa0 port 0x290/8: W83627DHG fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 mtrr: Pentium Pro MTRR support uhidev0 at uhub5 port 2 configuration 1 interface 0 "B16_b_02 USB-PS/2 Optical Mouse" rev 2.00/98.02 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 4 buttons, Z dir wsmouse0 at ums0 mux 0 uhub8 at uhub6 port 1 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (5bf0f103751d986f.a) swap on wd0b dump on wd0b umass0 at uhub8 port 2 configuration 1 interface 0 "LaCie XtremKey" rev 2.00/1.00 addr 3 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd0 at scsibus3 targ 1 lun 0: &lt;LaCie, XtremKey, Dev&gt; SCSI0 0/direct removable serial.059f1038201010261648 sd0: 7478MB, 512 bytes/sector, 15316320 sectors ale0: watchdog timeout ale0: watchdog timeout ale0: watchdog timeout umass1 at uhub1 port 6 configuration 1 interface 0 "Nokia Nokia E75" rev 2.00/1.00 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Nokia, S60, 1.0&gt; SCSI0 0/direct removable serial.0421010d557017443637 sd1 detached scsibus4 detached umass1 detached ale0: watchdog timeout ale0: watchdog timeout ale0: watchdog timeout ale0: watchdog timeout ale0: watchdog timeout umass1 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. iPod" rev 2.00/0.01 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Apple, iPod, 1.62&gt; SCSI0 0/direct removable serial.05ac126227001BBADEB2 sd1: 7583MB, 4096 bytes/sector, 1941441 sectors sd1 detached scsibus4 detached umass1 detached umass1 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. iPod" rev 2.00/0.01 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Apple, iPod, 1.62&gt; SCSI0 0/direct removable serial.05ac126227001BBADEB2 sd1: 7583MB, 4096 bytes/sector, 1941441 sectors sd1 detached scsibus4 detached umass1 detached umass1 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. iPod" rev 2.00/0.01 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Apple, iPod, 1.62&gt; SCSI0 0/direct removable serial.05ac126227001BBADEB2 sd1: 7583MB, 4096 bytes/sector, 1941441 sectors sd1 detached scsibus4 detached umass1 detached umass1 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. iPod" rev 2.00/0.01 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Apple, iPod, 1.62&gt; SCSI0 0/direct removable serial.05ac126227001BBADEB2 sd1: 7583MB, 4096 bytes/sector, 1941441 sectors sd1 detached scsibus4 detached umass1 detached umass1 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. iPod" rev 2.00/0.01 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Apple, iPod, 1.62&gt; SCSI0 0/direct removable serial.05ac126227001BBADEB2 sd1: 7583MB, 4096 bytes/sector, 1941441 sectors sd1 detached scsibus4 detached umass1 detached umass1 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. iPod" rev 2.00/0.01 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Apple, iPod, 1.62&gt; SCSI0 0/direct removable serial.05ac126227001BBADEB2 sd1: 7583MB, 4096 bytes/sector, 1941441 sectors sd1 detached scsibus4 detached umass1 detached umass1 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. iPod" rev 2.00/0.01 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Apple, iPod, 1.62&gt; SCSI0 0/direct removable serial.05ac126227001BBADEB2 sd1: 7583MB, 4096 bytes/sector, 1941441 sectors sd1 detached scsibus4 detached umass1 detached umass1 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. iPod" rev 2.00/0.01 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Apple, iPod, 1.62&gt; SCSI0 0/direct removable serial.05ac126227001BBADEB2 sd1: 7583MB, 4096 bytes/sector, 1941441 sectors sd1 detached scsibus4 detached umass1 detached umass1 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. iPod" rev 2.00/0.01 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Apple, iPod, 1.62&gt; SCSI0 0/direct removable serial.05ac126227001BBADEB2 sd1: 7583MB, 4096 bytes/sector, 1941441 sectors sd1 detached scsibus4 detached umass1 detached umass1 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. iPod" rev 2.00/0.01 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Apple, iPod, 1.62&gt; SCSI0 0/direct removable serial.05ac126227001BBADEB2 sd1: 7583MB, 4096 bytes/sector, 1941441 sectors sd1 detached scsibus4 detached umass1 detached umass1 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. iPod" rev 2.00/0.01 addr 2 umass1: using SCSI over Bulk-Only scsibus4 at umass1: 2 targets, initiator 0 sd1 at scsibus4 targ 1 lun 0: &lt;Apple, iPod, 1.62&gt; SCSI0 0/direct removable serial.05ac126227001BBADEB2 sd1: 7583MB, 4096 bytes/sector, 1941441 sectors sd1 detached scsibus4 detached umass1 detached Any help appreciated. Kind regards, Roy Stuivenberg. Amsterdam. </pre> Roy Stuivenberg 2011-11-10T07:35:20 http://permalink.gmane.org/gmane.os.openbsd.x11/459 <pre>Thanks, Matthieu. I solved this by switching to a different mirror. Even downloading from anoncvs.usa.openbsd.org many hours after you had made the last check-in resulted in the same error. On Sun, Nov 6, 2011 at 6:00 AM, Matthieu Herrb &lt;matthieu.herrb&lt; at &gt;laas.fr&gt;wrote: </pre> James Hartley 2011-11-07T19:28:50 http://permalink.gmane.org/gmane.os.openbsd.x11/458 <pre>Yes, and also an update for the X server, which is required if you want to rebuild most of the drivers that I updated after that: http://marc.info/?l=openbsd-cvs&amp;m=132050070928826&amp;w=2 </pre> Matthieu Herrb 2011-11-06T14:00:39 http://permalink.gmane.org/gmane.os.openbsd.x11/457 <pre>After downloading the 3 Nov i386 snapshot, &amp; fetching the CVS trees, building xenocara stopped when compiling xf86-input-void with the error: checking for XORG... configure: error: Package requirments (xorg-server &gt;= 1.9.99.1 xproto) were not met: Requested 'xorg-server &gt;= 1.9.99.1 but version of xorg-server is 1.9.5 Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables XORG_CFLAGS and XORG_LIBS to avoid the need to call pkg_config. See the pkg-config man page for more details. I there was a check-in for xf86-input-void on 5 Nov: http://marc.info/?l=openbsd-cvs&amp;m=132050065428812&amp;w=2 </pre> James Hartley 2011-11-06T13:01:26 http://permalink.gmane.org/gmane.os.openbsd.x11/456 <pre>back when i still had time to tinker with openbsd, i bought a slightly slower (pci), yet slightly higher capacity (more ram), ati graphics card; that replaced the nvidia card that came with the g4 mac; just so i could run blender3d on my system. it was hard to obtain in yucatan, too. i had to get it through the mail and everything. it was definetly worth it, though. since then, i have always favored ati over nvidia. besides, ati is owned by amd, a company which i personally tend to like (for various off-topic reasons). saludos! -carlos On Sun, Oct 16, 2011 at 4:55 AM, Matthieu Herrb &lt;matthieu.herrb&lt; at &gt;laas.fr&gt; wrote: of </pre> carlos duarte 2011-11-02T03:21:01 http://permalink.gmane.org/gmane.os.openbsd.x11/455 <pre> No. </pre> Antoine Jacoutot 2011-10-16T20:25:02 http://permalink.gmane.org/gmane.os.openbsd.x11/454 <pre>is there any way to install Gnome3 that run well? Zantgo </pre> Zantgo 2011-10-16T19:53:54 Search the mailing list at Gmane query http://search.gmane.org/?group=$group=gmane.os.openbsd.x11