gmane.emacs.macintosh.osx

Re: Aquamacs Emacs 2.5 released

David Reitter — 2013-06-17T13:11:00


Time lag.  The Aquamacs 2.5 release took a while.  At the time when python mode was installed, version 6.0.8 was current.


No.  Nothing prevents you from installing it - and in fact, if you do it in a git checkout, you can send a merge request via Github (don't forget to update changelog.tex) and I'll accept it.

Best,
David


--
http://aquamacs.org -- Aquamacs: Emacs on Mac OS X
http://aquamacs.org/donate -- Could we help you? Return the favor and support the Aquamacs Project!

_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
https://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

Re: Aquamacs Emacs 2.5 released

David Poole — 2013-06-16T20:33:10

Thanks David!
Aquamacs is a much-appreciated contribution.

I have a question about the python-mode. Why was it upgraded only to 
6.0.8 when the latest version of python-mode is 6.1.1? Are there 
problems with integrating the later versions of python-mode into Aquamacs?

David


 > On 14.06.2013, at 13:33, David Reitter wrote:

Re: Aquamacs Emacs 2.5 released

Alex Hamann — 2013-06-15T20:07:21

Great, thanks David for the hard work you are putting into this. Currently not using Aquamacs very much but it is a great editor.

Alex


On 14.06.2013, at 13:33, David Reitter wrote:



_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
https://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

Re: skim crashes in 10.8.4

David Reitter — 2013-06-14T12:06:08


I'm not sure what evidence could support such a statement.


Possibly.



I can only offer the usual suspects - Preview, Adobe Reader.  Also, see here:

http://mactex-wiki.tug.org/wiki/index.php/Viewers


--
http://aquamacs.org -- Aquamacs: Emacs on Mac OS X
http://aquamacs.org/donate -- Could we help you? Return the favor and support the Aquamacs Project!

_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
https://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

skim crashes in 10.8.4

Johannes Brauer — 2013-06-14T06:28:23

Hi,

after having updated my Mac OS to 10.8.4 skim crashes always when it autoupdate or revert a pdf. I posted the problem to the skim list but Christiaan Hofman told me: "The problem is clearly in the system frameworks, not in our code. It may very well be a regression in 10.8.4. So it's not something we would be able to fix.".

Is there a good alternative to skim to be used in conjunction with aquamacs?

Johannes

________________________________


Staatlich anerkannte private Fachhochschule
NORDAKADEMIE
Gemeinnützige Aktiengesellschaft
Köllner Chaussee 11
25337 Elmshorn

Vorstand:
Prof. Dr. Georg Plate (Vorsitzender), Dipl.-Ing. Jörg Meier (stellv. Vorstand)

Vorsitzender des Aufsichtsrats:
Dr. h.c. Hans-Heinrich Bruns

Sitz:
Elmshorn, Amtsgericht Pinneberg, HRB 1682


_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
https://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

Re: aquamacs skim sync

Johannes Brauer — 2013-06-13T14:30:29

Hi David,

thanks for yout immediate answer!
Am 13.06.2013 um 15:37 schrieb David Reitter <david.reitter< at >gmail.com>
:

Aquamacs Emacs was chosen; that seemed to be the problem. After having changed it to Aquamacs, it's okay!



________________________________


Staatlich anerkannte private Fachhochschule
NORDAKADEMIE
Gemeinnützige Aktiengesellschaft
Köllner Chaussee 11
25337 Elmshorn

Vorstand:
Prof. Dr. Georg Plate (Vorsitzender), Dipl.-Ing. Jörg Meier (stellv. Vorstand)

Vorsitzender des Aufsichtsrats:
Dr. h.c. Hans-Heinrich Bruns

Sitz:
Elmshorn, Amtsgericht Pinneberg, HRB 1682


_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
https://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

Re: aquamacs skim sync

David Reitter — 2013-06-13T13:37:18

Hi Johannes,

On Jun 13, 2013, at 9:00 AM, Johannes Brauer <brauer< at >nordakademie.de> wrote:


Works for me in 2.5rc1.

In the Skim Preferences, under "Sync", the preset "Aquamacs" is chosen.
Maybe you have to install Command Line Tools from within Aquamacs (Tools menu).

Also, in Aquamacs:
Command->TeXing Options->Correlate I/O is turned on.  (Default)
The value of `TeX-source-correlate-method' is `auto' (the default).

I'm using a relatively recent TeXLive (MacTeX) installation.

I find '.synctex.gz' files after running LaTeX - these contain crucial information.

Hope that helps.


--
http://aquamacs.org -- Aquamacs: Emacs on Mac OS X
http://aquamacs.org/donate -- Could we help you? Return the favor and support the Aquamacs Project!

_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
https://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

aquamacs skim sync

Johannes Brauer — 2013-06-13T13:00:14

Hi,

cmd-shift-click in a latex doc in aquamacs (2.4) opens skim (1.4.3) at the corresponding position in the pdf, fine. But doing it in skim nothing happens, the focus remains in skim.

What can I do?

Johannes

________________________________


Staatlich anerkannte private Fachhochschule
NORDAKADEMIE
Gemeinnützige Aktiengesellschaft
Köllner Chaussee 11
25337 Elmshorn

Vorstand:
Prof. Dr. Georg Plate (Vorsitzender), Dipl.-Ing. Jörg Meier (stellv. Vorstand)

Vorsitzender des Aufsichtsrats:
Dr. h.c. Hans-Heinrich Bruns

Sitz:
Elmshorn, Amtsgericht Pinneberg, HRB 1682


_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
https://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

Re: Installing newer version of org-mode

David Reitter — 2013-06-07T17:12:47

Thank you.  

The 3.x development branch of Aquamacs contains a current version of org-mode.
The 2.x releases inherit their old Org from the Emacs 23 codebase.

--
http://aquamacs.org -- Aquamacs: Emacs on Mac OS X
http://aquamacs.org/donate -- Could we help you? Return the favor and support the Aquamacs Project!


On Jun 7, 2013, at 12:12 PM, Roland Whitehead <rolandw< at >mac.com> wrote:



_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
https://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

Re: Installing newer version of org-mode

Roland Whitehead — 2013-06-07T16:12:55

Way back in 2009, Stefan Vollmar very kindly gave a recipe for updating org mode with Aquamacs (Thanks, Stefan). Today I found that the Aquamacs install of org mode is 6.33 when the current version is 8.0.3. Unfortunately, Stefan's recipe needed some updating.

So this is what I did (in case someone else is looking to do the same).

I created a directory, let's call it src. Into src I cloned the git repository:

    git clone git://orgmode.org/org-mode.git

In the new directory ~/src/org-mode I created a file "local.mk" (in Aquamacs of course) whose contents were:

    up2::   # default target
    EMACS   = /Applications/Aquamacs.app/Contents/MacOS/Aquamacs
    prefix  = ~/Library/Application\ Support/Aquamacs\ Emacs

    lispdir = $(prefix)/org
    datadir = $(prefix)/org/data
    infodir = $(prefix)/org/info

And at the bottom of my .emacs file added:

    ;; org mode settings
    (defvar org-sys-directory "~/devel/org-mode/lisp"
       "The directory containing the org distribution.")
    (setq load-path (cons org-sys-directory load-path))

I created three directories in my Library via the terminal

    mkdir -pv ~/Library/Application\ Support/Aquamacs\ Emacs/org/data
    mkdir -pv ~/Library/Application\ Support/Aquamacs\ Emacs/org/info

I then simply ran "make install" in the terminal (eShell actually) from within my ~/src/org-mode directory.

Finally, I had to restart Aquamacs (because I'd edited my .emacs file as, after all these years I still don't know how to re-source .emacs from with emacs….) before loading org-mode with m-x org-reload which told me that 8.03 was now loaded.

The benefit of this is that if I update Aquamacs then I shouldn't have to re-do all this again as it is now all safely in my Library file and, as I have aliased "amacs" in my .profle, I can use these same settings from the terminal if I'm not using Aquamacs (alias amacs='/Applications/Aquamacs.app/Contents/MacOS/Aquamacs -nw') by entering 'amacs' rather than the built in 'emacs'.

NB. I take no responsibility for org mode 8.03 not working for you BTW!


Roland Whitehead

Aquamacs 2.5 release candidate available

David Reitter — 2013-05-28T22:58:35

I am making Aquamacs 2.5 release candidate 1 available here:

http://braeburn.aquamacs.org/Aquamacs-Emacs-2.5rc1.dmg

Please send me bug reports and other feedback via the official channels.

The changes are as follows.

- Aquamacs is now signed and will now execute with the default GateKeeper settings in OS X 10.8.
- Full-screen now supports the standard Mac OS X 10.7 ``Lion'' full-screen mode:  The frame takes up the full (main) display and uses its own screen.  Users may switch between screens as usual (mouse swipe or C-left/right, for instance).  The old-style fullscreen mode is still available, however.  To maximize a frame on the current space, allowing other frames on this space, type C-u A-S-Return, or prepend any of the commands that enter fullscreen mode with C-u.
Thanks for research: Sandy Patterson and Daisuke Murase.
- Retina displays are now supported (high-resolution artwork is included in most cases).  LaTeX Preview mode (AUCTeX) has been modified to show high-resolution previews.  (Technical note: other packages can be updated by providing TIFFs with multiple resolutions, or by generating high-DPI images, setting their DPI meta information correctly, and setting the new `ns-true-dpi-images-filename-string' variable while loading images.)
- S-tab no longer mapped to C-y (ASCII 25, end of medium). Now properly handled as backtab.  Patch by Gracjan Polak.
- Aquamacs now provides experimental session persistency:  you can load and save sessions.  Use the new Load Session, Save Session As menu entries in the File menu to use these new functions.  Note: Unlike the formerly available functions from the `desktop' package, all frames, windows, tabs, buffers and some customizations are saved.  Buffers not linked to a file, such as those showing processes, will not be restored, and frames may not end up on the same space at this time.  Aquamacs now includes an adapted version of the revive.el package by Hirose Yuuji.  We recommend that you do not load a different version of this package yourself.
- Colors are now displayed in the ``color space'' that is set by the user for the specific display.  A slight change in color shades may be noticed.
Suggested by Juan Jose Garcia Ripoll.
- Text search (isearch) now works better when using one of the Emulate-Mac-Keyboard-Modes.
Reported by Thomas Strathmann.
- Frames are now reliably moved inside the current display again when entering the minibuffer (and at other times).
- Switching applications while Aquamacs is in full-screen mode no longer creates unwanted empty frames.
Reported by Christian Holtje, Rory Kirchner and Milan Mitrovic.
- ESS upgraded to 13.05. (Previous version was 5.13 - no joke. The ESS version numbering changed.) See here for changes: http://ess.r-project.org/Manual/ess.html#New-features
- AUCTeX upgraded to 11.87. (Previous version was 11.86.) See here for changes: http://www.gnu.org/software/auctex/manual/auctex/Changes.html
- Python-mode upgraded to 6.0.8.  (Previous version was 6.0.2.)  See here for changes: https://launchpad.net/python-mode/+announcements
- Prolog-mode upgraded to 1.23. (Previous version was 1.19.)  (Added support for XSB.)


--
http://aquamacs.org -- Aquamacs: Emacs on Mac OS X
http://aquamacs.org/donate -- Could we help you? Return the favor and support the Aquamacs Project!
_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
http://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

Re: Put flyspell to work

Nathaniel Cunningham — 2013-05-13T15:19:21

Two things:
1) Check at the command line that aspell sees the installed dictionaries:
 run "aspell dicts" to get a list of available dictionaries

2) It appears that Emacs is attempting to use a "default" dictionary, and
your .emacs settings don't specify a specific dictionary.  You might try
setting a dictionary explicity:
  (setq ispell-dictionary "german")

Or for buffer-local settings:

  -*- ispell-dictionary: "english" -*-a

--Nathaniel

_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
http://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

RE: Put flyspell to work

Daniel Marcelino — 2013-05-13T13:44:30

Hi, I did install aspell and few dictionaires. Any advice?
Daniel

\begin{signature}Daniel Marcelino☁ dm.silva< at >umontreal.ca ☎ (514) 343 6111 #3799Skype: d.marcelino ✎ 3200 Jean Brillant,  Office C5071Montreal, QC; H3T 1N8Canada\end{signature}
"Small steps toward a much better world"

Date: Sun, 12 May 2013 20:30:35 -0500
Subject: Re: [OS X Emacs] Put flyspell to work
From: nathaniel.cunningham< at >gmail.com
To: macosx-emacs< at >email.esm.psu.edu

On Sun, May 12, 2013 at 6:36 PM, Daniel Marcelino <dmarcelino< at >live.com> wrote:

I've an issue with flyspell, the error message I receive is the following: 

Starting new Ispell process [/usr/local/bin/aspell::default] ...ispell-init-process: Error: No word lists can be found for the language "en_US".

Daniel, you didn't mention -- do you have aspell & associated dictionaries installed?  These must be installed separately from Emacs.

Re: Put flyspell to work

Nathaniel Cunningham — 2013-05-13T01:30:35

Daniel, you didn't mention -- do you have aspell & associated dictionaries
installed?  These must be installed separately from Emacs.

Put flyspell to work

Daniel Marcelino — 2013-05-12T23:36:29

Dear all,I've an issue with flyspell, the error message I receive is the following: 
Starting new Ispell process [/usr/local/bin/aspell::default] ...ispell-init-process: Error: No word lists can be found for the language "en_US".
I'm not using Aquamacs, which seems to provide this facility by default. Does anyone already solved something like this? 
In my emacs file, flyspell is supposedly fine. 
;; Spelling ---------------------------------------------(setq-default ispell-program-name "aspell") (autoload 'flyspell-mode "flyspell" "On-the-fly spelling checker." t) (dolist (hook '(text-mode-hook))       (add-hook hook (lambda () (flyspell-mode 1))))   (add-hook 'tex-mode-hook (lambda ()  (flyspell-mode 1)))    (add-hook 'LaTeX-mode-hook (lambda () (flyspell-mode 1)))      (dolist (hook '(change-log-mode-hook log-edit-mode-hook))       (add-hook hook (lambda () (flyspell-mode -1))))    (add-hook 'c++-mode-hook (lambda () (flyspell-prog-mode)))
\begin{signature}Daniel Marcelino☁ dm.silva< at >umontreal.ca ☎ (514) 343 6111 #3799Skype: d.marcelino ✎ 3200 Jean Brillant,  Office C5071Montreal, QC; H3T 1N8Canada\end{signature}
"Small steps toward a much better world"       
_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
http://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

Re: MacOSX-Emacs Digest, Vol 65, Issue 4

Ryan Brown — 2013-03-25T20:06:38

That seems to fix it but my erlang-mode is gone.


On Mon, Mar 25, 2013 at 1:00 PM, <macosx-emacs-request< at >email.esm.psu.edu>wrote:

Re: Question about keyboard shortcuts in Aquamacs

David Reitter — 2013-03-25T16:44:11

This should not be, and I have never seen it.
I have insufficient information to give advice.

Could you please give us a list of step-by-step instructions, starting with "Start Aquamacs without customizations" from the "Help/Diagnose and Report Bug" menu?

Thanks
- David


--
http://aquamacs.org -- Aquamacs: Emacs on Mac OS X
http://aquamacs.org/donate -- Could we help you? Return the favor and support the Aquamacs Project!
_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
http://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

Question about keyboard shortcuts in Aquamacs

Ryan Brown — 2013-03-25T15:33:31

Hello all,

I am new to this group and to Aquamacs so excuse me if this is a simplistic
question. I have recently installed Aquamacs on my macbook and included my
required erlang-mode tools as well. Erlang mode seems to work great.
However, I am having an issue wit6h some of the keyboard shortcuts I'm used
to. Could someone tell me what it means when the shortcut from the menu
starts with question marks?

For example, my "New buffer in new tab" shortcut displays as ???T. If I
could map this to Command-T it would be perfectly intuitive to me. Or
really, just understanding what this means I can probably work with the
defaults.

Thanks in advance.

Cannot open load file "tramp-loaddefs"

Peter Salazar — 2013-03-12T10:17:48

I'm getting this error when I try to open anything in tramp-mode. Any ideas?


Debugger entered--Lisp error: (file-error "Cannot open load file"
"tramp-loaddefs")
  require(tramp-loaddefs)
  (progn (when (featurep ...) (require ...) (require ...) (require ...)
(require ...) (require ...) (require ...) (require ...)) (require (quote
advice)) (require (quote custom)) (require (quote format-spec)) (require
(quote shell)) (require (quote trampver)) (require (quote tramp-loaddefs))
(if (featurep ...) (load "password" ...) (or ... ...)) (if (featurep ...)
(load "auth-source" ...) (require ... nil ...)) (if (featurep ...) (require
...) (require ...)) (when (featurep ...) (unless ... ...) (delq ...
byte-compile-default-warnings)) (unless (boundp ...) (defvar
last-coding-system-used nil)) (when (boundp ...) (defvar
byte-compile-not-obsolete-var nil) (setq byte-compile-not-obsolete-var ...)
(defvar byte-compile-not-obsolete-vars nil) (setq
byte-compile-not-obsolete-vars ...)) (unless (boundp ...) (defvar
remote-file-name-inhibit-cache nil)) (defmacro tramp-compat-funcall
(function &rest arguments) (if ... ... ...)) (unless (fboundp ...)
(defalias ... ...)) (unless (fboundp ...) (defalias ... ...)) (unless
(fboundp ...) (defalias ... ...)) (unless (fboundp ...) (defalias ... ...))
(unless (fboundp ...) (defalias ... ...)) (unless (or ... ...) (defadvice
file-expand-wildcards ... ...) (add-hook ... ...)))
  (eval-and-compile (when (featurep ...) (require ...) (require ...)
(require ...) (require ...) (require ...) (require ...) (require ...))
(require (quote advice)) (require (quote custom)) (require (quote
format-spec)) (require (quote shell)) (require (quote trampver)) (require
(quote tramp-loaddefs)) (if (featurep ...) (load "password" ...) (or ...
...)) (if (featurep ...) (load "auth-source" ...) (require ... nil ...))
(if (featurep ...) (require ...) (require ...)) (when (featurep ...)
(unless ... ...) (delq ... byte-compile-default-warnings)) (unless (boundp
...) (defvar last-coding-system-used nil)) (when (boundp ...) (defvar
byte-compile-not-obsolete-var nil) (setq byte-compile-not-obsolete-var ...)
(defvar byte-compile-not-obsolete-vars nil) (setq
byte-compile-not-obsolete-vars ...)) (unless (boundp ...) (defvar
remote-file-name-inhibit-cache nil)) (defmacro tramp-compat-funcall
(function &rest arguments) (if ... ... ...)) (unless (fboundp ...)
(defalias ... ...)) (unless (fboundp ...) (defalias ... ...)) (unless
(fboundp ...) (defalias ... ...)) (unless (fboundp ...) (defalias ... ...))
(unless (fboundp ...) (defalias ... ...)) (unless (or ... ...) (defadvice
file-expand-wildcards ... ...) (add-hook ... ...)))
  eval-buffer(#<buffer  *load*<2>> nil
"/Users/peter/Library/Preferences/Aquamacs
Emacs/tramp/lisp/tramp-compat.el" nil t)  ; Reading at buffer position 6641
  load-with-code-conversion("/Users/peter/Library/Preferences/Aquamacs
Emacs/tramp/lisp/tramp-compat.el"
"/Users/peter/Library/Preferences/Aquamacs
Emacs/tramp/lisp/tramp-compat.el" nil t)
  require(tramp-compat)
  eval-buffer(#<buffer  *load*> nil
"/Users/peter/Library/Preferences/Aquamacs Emacs/tramp/lisp/tramp.el" nil
t)  ; Reading at buffer position 2293
  load-with-code-conversion("/Users/peter/Library/Preferences/Aquamacs
Emacs/tramp/lisp/tramp.el" "/Users/peter/Library/Preferences/Aquamacs
Emacs/tramp/lisp/tramp.el" t t)
  require(tramp nil t)

ido-file-name-all-completions-1("/Users/peter/Dropbox/writing/notationaldata/")

ido-file-name-all-completions("/Users/peter/Dropbox/writing/notationaldata/")
  ido-make-file-list-1("/Users/peter/Dropbox/writing/notationaldata/")
  ido-make-file-list(nil)
  ido-read-internal(file "Find file: " ido-file-history nil nil nil)
  ido-file-internal(raise-frame)
  ido-find-file()
  call-interactively(ido-find-file nil nil)

_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
http://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

playing sounds in Aquamacs

Peter Salazar — 2013-03-12T04:11:40

Anyone know about playing system sounds in Aquamacs?

I'm trying to implement the below, but I get "This Emacs binary lacks sound
support."

(add-hook 'org-after-todo-state-change-hook 'my-org-after-todo)
(defun my-org-after-todo ()
  (org-clock-out-if-current)
  (play-sound-file "~/Library/Sounds/InkSoundStroke3.aif"))

_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
http://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx

Re: I somehow broke color-theme-select

David Reitter — 2013-03-08T02:16:01

Do you have your own color-theme library installed?

That's when the official bug reports via the Help menu come in handy.


--
http://aquamacs.org -- Aquamacs: Emacs on Mac OS X
http://aquamacs.org/donate -- Could we help you? Return the favor and support the Aquamacs Project!



On Mar 7, 2013, at 9:12 PM, Peter Salazar <cycleofsong< at >gmail.com> wrote:



_____________________________________________________________
MacOSX-Emacs mailing list
MacOSX-Emacs< at >email.esm.psu.edu
http://email.esm.psu.edu/mailman/listinfo/macosx-emacs
List Archives: http://dir.gmane.org/gmane.emacs.macintosh.osx