gmane.comp.mobile.mbuni.user

MBuni Applicability

Rajesh Kumar Kadle — 2013-05-17T04:48:18

Hi,

We are looking for options to integrate MMS feature with our enter prise
application. As part of this, users should be able to take pictures and
send to us as MMS.

For this use case, we were exploring "MBuni" to see if it meets our needs.

for service/content providers rather that such enterprise applications.

Wanted to check with user community on what will be good way to integrate
or expect incoming MMS.

Any inputs are much appreciated.

Thanks,
-Rajesh
_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

(no subject)

lamia krim — 2013-04-20T17:20:41

Hello
How I can send MMS from pc to mobile using mbuni with GPRS modem  .
_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Is it possible?

Adam Barrett — 2013-01-21T18:06:35

Hey guys,

First thanks for the information. The site has been really helpful. I am
completely new to MMS (and all things SMS, VoIP, etc) so I am grateful for
all the information so far.

I have a number setup through Google Voice. Which has zero MMS support. I
have all my SMS and Voice and Voicemail going through them right now.

I was wondering if it is possible to setup my own MMSC and supplement the
lack of MMS support from Google. I am not sure what lines are drawn where.

To give you an idea of what I have setup, and would like to support is as
follows:

I have a phone with Simple Mobile (a T-mobile MVNO) a 385 number. My number
is ported to Google Voice (a 801 number). So when someone calls me (801) it
goes to GV and then is redirected to my  (385) cell phone. In theory it
could go elsewhere as well. SMS also goes directly to GV and then I use
their app to retrieve messages. MMS just fails. I get no notifications etc.

Is it possible to have voice and voicemail handled through GV and setup my
own MMSC to handle SMS and MMS? Do I have to handle the entire suite (VoIP,
DID, SIP, SMS, MMS)?

Thanks!

Adam
_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Re: connect to operator MMS proxy

2012-12-13T12:52:46

I tried to setup mmsbox but it is giving me following error 


2012-12-13 13:46:54 [8034] [21] ERROR: bearerbox.c:1679 <process_send_res> [MM7] [n/a] Retry later MMSBox Outgoing Queue MMS Send: From 02256/TYPE=PLMN, to 003xxxxxx/TYPE=PLMN, msgsize=103: Failed to contact MMC[url=http://xxxxxxxxxxxxxxxx:84/mms/authenticate] => HTTP returned status=[400]!

any idea?


From: mozzee< at >gmail.com 
Sent: 11 December 2012 6:01 PM
To: Paul Bagyenda 
Cc: users< at >mbuni.org 
Subject: Re: [Users] connect to operator MMS proxy

OK, Thanks. I’ll check. One more question, do we need to configure something on kannel side like bearbox / smsbox / wapbox to make mmsbox working? 

- Ali  

From: Paul Bagyenda 
Sent: 11 December 2012 10:29 AM
To: mozzee< at >gmail.com 
Cc: users< at >mbuni.org 
Subject: Re: [Users] connect to operator MMS proxy

1. Only mmsbox.  
2. You need only configure the mmsc and mms-service group as a start 

 
On Dec 10, 2012, at 22:08, mozzee< at >gmail.com wrote:


  I am new to mbuni and want to know few things.

  1. to run mbuni in gateway mode do I need to  use both mmsbox and mmsc? 
  2. What configuration required to integrate mbuni to an operator MM7 proxy server using  proxy URL  

  - Ali
  _______________________________________________
  Users mailing list
  Users< at >mbuni.org
  http://lists.mbuni.org/mailman/listinfo/users

_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Re: Trouble with SSL

HARLOW Peter — 2012-12-12T07:04:53


 >  I haven't had much success getting mbuni working yet and was hoping someone could provide some help.

A *very* long shot Peter, I had all sorts of SSL trouble trying to compile Mbuni on Ubuntu, so when I did an install on a clean machine I used OpenSuse 12.1 (which I believe is the OS used for development) and the problems went away. (I used the SSL that came with the distribution).

If you are doing a clean install, it might be worth a try.

Peter Harlow
Systems Engineer
Thales Communications & Security S.A
T&S-Billetique/Projets & Systemes/I&A
Rue de la Mare aux Joncs
91229 Bretigny sur Orge Cedex
Tel: +33 (0) 1 69 88 59 41
Fax: +33 (0)1 69 88 57 35
Email :   peter.harlow< at >thalesgroup.com<mailto:peter.harlow< at >thalesgroup.com>
_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Re: connect to operator MMS proxy

2012-12-11T13:01:19

OK, Thanks. I’ll check. One more question, do we need to configure something on kannel side like bearbox / smsbox / wapbox to make mmsbox working? 

- Ali  

From: Paul Bagyenda 
Sent: 11 December 2012 10:29 AM
To: mozzee< at >gmail.com 
Cc: users< at >mbuni.org 
Subject: Re: [Users] connect to operator MMS proxy

1. Only mmsbox.  
2. You need only configure the mmsc and mms-service group as a start 

On Dec 10, 2012, at 22:08, mozzee< at >gmail.com wrote:

  I am new to mbuni and want to know few things.

  1. to run mbuni in gateway mode do I need to  use both mmsbox and mmsc? 
  2. What configuration required to integrate mbuni to an operator MM7 proxy server using  proxy URL  

  - Ali
  _______________________________________________
  Users mailing list
  Users< at >mbuni.org
  http://lists.mbuni.org/mailman/listinfo/users

_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Re: connect to operator MMS proxy

Paul Bagyenda — 2012-12-11T05:29:47

1. Only mmsbox. 
2. You need only configure the mmsc and mms-service group as a start 
On Dec 10, 2012, at 22:08, mozzee< at >gmail.com wrote:


_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Re: connect to operator MMS proxy

2012-12-10T19:08:38

I am new to mbuni and want to know few things.

1. to run mbuni in gateway mode do I need to  use both mmsbox and mmsc? 
2. What configuration required to integrate mbuni to an operator MM7 proxy server using  proxy URL  

- Ali_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Re: Limit mms size in mm1

Oltion Kola — 2012-11-02T11:37:05

Hi,

Anyone has ever tried something like this?

Thank you,
Olti

On 10/31/2012 09:44 AM, Oltion Kola wrote:

Limit mms size in mm1

Oltion Kola — 2012-10-31T08:44:36

Hi,

Is there a way to limit the MMS size in the mm1 interface through 
configuration? Which parameter is it as I can not find any in the 
documentation.

Thank you,
Olti

mmsproxy not installed with mbuni

Mohamed Ould Mohamed Salem — 2012-08-28T17:11:15

Hi,

I am trying to install and use mbuni.

I followed the installation instruction and all seems fine.

mmsc starts and so does mmsbox.

But the command mmsproxy is not installed.

If i issue the mmsproxy command it says command not found.


When i redid the installation, mmsproxy is still not installed along with mmsrelay.


Kannel and mbuni are installed on an Ubuntu Virtual Machine.



any ideas?
_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Problems with smil text elements and Unicode

HARLOW Peter — 2012-07-13T12:18:32

After getting my setup mostly working I had one annoying problem - non - ascii characters in text files (e. g. '£')  referenced by the smil file were not displaying correctly on the phone.

My application was writing the text to text files in a directory of an Apache web server. The smil file referenced the text file via http.

I checked my application was writing valid UTF-8 text files.

The problem appears to be that the web server is just serving the files as 'Content-Type: text/plain'.

Adding an .htaccess file to the appropriate directory on the web server to serve the text files as 'Content-Type: text/plain; charset=UTF-8' appears to have fixed the problem.

[< at >< at >THALES GROUP RESTRICTED< at >< at >]

_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Re: Connection to MMSC fails - MM1

Paul Bagyenda — 2012-07-13T05:50:35

Thanks for the heads-up.
On Jul 12, 2012, at 17:02, HARLOW Peter wrote:


_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Re: Connection to MMSC fails - MM1

HARLOW Peter — 2012-07-12T14:02:15

Further poking reveals that mbuni is trying to connect before the link is properly established and routing set up.

Using a 'fiddle' lockfile invoked by ip-up as described in :

http://www.mail-archive.com/users< at >mbuni.org/msg02098.html

(also need to remove it in ip-down)

and putting 'nodetach' in the pppd peers file vastly improves things.


[< at >< at >THALES GROUP RESTRICTED< at >< at >]

De : users-bounces< at >mbuni.org [mailto:users-bounces< at >mbuni.org] De la part de HARLOW Peter
Envoyé : 04 July 2012 15:29
À : users< at >mbuni.org
Objet : Re: [Users] Connection to MMSC fails - MM1

De : users-bounces< at >mbuni.org [mailto:users-bounces< at >mbuni.org] De la part de HARLOW Peter
Envoyé : 04 July 2012 13:53
À : users< at >mbuni.org
Objet : Re: [Users] Connection to MMSC fails - MM1


On turning off eth0, the problem now shifts to reaching the network. Starting the network with pon and then accessing the mmsc with a web browser with the proxy set appropriately works.

Mbuni frequently, but not always, fails to connect.

2012-07-04 15:16:37 [3118] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 15:16:37 [3118] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 15:16:37 [3118] [5] ERROR: mmsbox_mm1.c:681 <fetch_content> [mmsbox-mm1] [n/a] failed to fetch/post content to host http://mms.bouyguestelecom.fr/mms/wapenc [proxy: 62.201.129.226:8080] [http_status=7] : Failed to connect to 62.201.129.226: Network is unreachable
2012-07-04 15:16:38 [3118] [5] DEBUG: Octet string at 0x112ad4f8:
2012-07-04 15:16:38 [3118] [5] DEBUG:   len:  0
2012-07-04 15:16:38 [3118] [5] DEBUG:   size: 0
2012-07-04 15:16:38 [3118] [5] DEBUG:   immutable: 0
_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Putting Mbuni into a MVNO setup, possible?

Henrik Aagaard Sørensen — 2012-07-05T13:46:19

I have no experience with a MMS gateway / MMSC, but I'm looking for a
open source MMSC which can be integrated into a SIGTRAN MVNO setup.

Does anyone have any experience in this field?

Regards,
Henrik

Re: Connection to MMSC fails - MM1

HARLOW Peter — 2012-07-04T13:28:53

De : users-bounces< at >mbuni.org [mailto:users-bounces< at >mbuni.org] De la part de HARLOW Peter
Envoyé : 04 July 2012 13:53
À : users< at >mbuni.org
Objet : Re: [Users] Connection to MMSC fails - MM1


On turning off eth0, the problem now shifts to reaching the network. Starting the network with pon and then accessing the mmsc with a web browser with the proxy set appropriately works.

Mbuni frequently, but not always, fails to connect.

2012-07-04 15:16:37 [3118] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 15:16:37 [3118] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 15:16:37 [3118] [5] ERROR: mmsbox_mm1.c:681 <fetch_content> [mmsbox-mm1] [n/a] failed to fetch/post content to host http://mms.bouyguestelecom.fr/mms/wapenc [proxy: 62.201.129.226:8080] [http_status=7] : Failed to connect to 62.201.129.226: Network is unreachable
2012-07-04 15:16:38 [3118] [5] DEBUG: Octet string at 0x112ad4f8:
2012-07-04 15:16:38 [3118] [5] DEBUG:   len:  0
2012-07-04 15:16:38 [3118] [5] DEBUG:   size: 0
2012-07-04 15:16:38 [3118] [5] DEBUG:   immutable: 0
_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Re: Connection to MMSC fails - MM1

HARLOW Peter — 2012-07-04T11:52:49

On further investigation this appears to be a local routing problem - I think the data for http://mms.bouyguestelecom.fr/mms/wapenc is going through eth0<http://mms.bouyguestelecom.fr/mms/wapenc%20is%20going%20through%20eth0>, not ppp0.

[< at >< at >THALES GROUP RESTRICTED< at >< at >]

De : users-bounces< at >mbuni.org [mailto:users-bounces< at >mbuni.org] De la part de HARLOW Peter
Envoyé : 04 July 2012 10:58
À : users< at >mbuni.org
Objet : [Users] Connection to MMSC fails - MM1

Hello,

I have a partially working mmsbox setup. I am trying to send MMS messages via a mobile phone using the 'custom' mmsc type in mbuni.

Occasionally, it works. Mostly, however, the connection to the service provider mmsc fails.

Any ideas gratefully received.

Regards,

Pete.


   SMSC `nokiaphone' shut down


arg 0: pon
arg 1: gprs
2012-07-04 10:23:39 [3432] [5] INFO: mmsbox_mm1.c:391 <handle_mm1> [mmsbox-mm1] [n/a] start_gprs returned PID: 21670
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `application/vnd.wap.multipart.related', WSP 1.2 to 0x0033.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `type', WSP 1.2 to 0x0009.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `start', WSP 1.2 to 0x000a.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `image/jpeg', WSP 1.2 to 0x001e.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `Content-Location', WSP 1.3 to 0x000e.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `text/plain', WSP 1.2 to 0x0003.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Location', WSP 1.3 to 0x000e.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `application/smil', WSP 1.2 to 0xffffffff.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 10:24:20 [3432] [5] ERROR: mmsbox_mm1.c:681 <fetch_content> [mmsbox-mm1] [n/a] failed to fetch/post content to host http://mms.bouyguestelecom.fr/mms/wapenc [proxy: 62.201.137.017:8080] [http_status=28] : connect() timed out!
2012-07-04 10:24:20 [3432] [5] DEBUG: Octet string at 0x11b042f0:
2012-07-04 10:24:20 [3432] [5] DEBUG:   len:  0
2012-07-04 10:24:20 [3432] [5] DEBUG:   size: 0
2012-07-04 10:24:20 [3432] [5] DEBUG:   immutable: 0
2012-07-04 10:24:20 [3432] [5] DEBUG: Octet string dump ends.
2012-07-04 10:24:20 [3432] [5] ERROR: mmsbox_mm1.c:519 <handle_mm1> [mmsbox-mm1] [n/a] Sending failed: (none), (none)!
2012-07-04 10:24:20 [3432] [22] INFO: mmsbox_mm1.c:352 <send_msg> [mmsbox-mm1] [n/a] sent message, type=m-send-req, result=(none)
2012-07-04 10:24:20 [3432] [22] INFO: bearerbox.c:1652 <process_send_res> [MM7] [n/a] Retry later MMSBox Outgoing Queue MMS Send: From 100/TYPE=PLMN, to 0668288316/TYPE=PLMN, msgsize=7511: msgid=[N/A]
2012-07-04 10:24:22 [3432] [5] INFO: mmsbox_mm1.c:566 <handle_mm1> [mmsbox-mm1] [n/a] GPRS turned off returned: 0
   SMSC `nokiaphone' re-started


[< at >< at >THALES GROUP RESTRICTED< at >< at >]

_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Connection to MMSC fails - MM1

HARLOW Peter — 2012-07-04T08:58:21

Hello,

I have a partially working mmsbox setup. I am trying to send MMS messages via a mobile phone using the 'custom' mmsc type in mbuni.

Occasionally, it works. Mostly, however, the connection to the service provider mmsc fails.

Any ideas gratefully received.

Regards,

Pete.


   SMSC `nokiaphone' shut down


arg 0: pon
arg 1: gprs
2012-07-04 10:23:39 [3432] [5] INFO: mmsbox_mm1.c:391 <handle_mm1> [mmsbox-mm1] [n/a] start_gprs returned PID: 21670
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `application/vnd.wap.multipart.related', WSP 1.2 to 0x0033.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `type', WSP 1.2 to 0x0009.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `start', WSP 1.2 to 0x000a.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `image/jpeg', WSP 1.2 to 0x001e.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `Content-Location', WSP 1.3 to 0x000e.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `text/plain', WSP 1.2 to 0x0003.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Location', WSP 1.3 to 0x000e.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `application/smil', WSP 1.2 to 0xffffffff.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 10:24:20 [3432] [5] ERROR: mmsbox_mm1.c:681 <fetch_content> [mmsbox-mm1] [n/a] failed to fetch/post content to host http://mms.bouyguestelecom.fr/mms/wapenc [proxy: 62.201.137.017:8080] [http_status=28] : connect() timed out!
2012-07-04 10:24:20 [3432] [5] DEBUG: Octet string at 0x11b042f0:
2012-07-04 10:24:20 [3432] [5] DEBUG:   len:  0
2012-07-04 10:24:20 [3432] [5] DEBUG:   size: 0
2012-07-04 10:24:20 [3432] [5] DEBUG:   immutable: 0
2012-07-04 10:24:20 [3432] [5] DEBUG: Octet string dump ends.
2012-07-04 10:24:20 [3432] [5] ERROR: mmsbox_mm1.c:519 <handle_mm1> [mmsbox-mm1] [n/a] Sending failed: (none), (none)!
2012-07-04 10:24:20 [3432] [22] INFO: mmsbox_mm1.c:352 <send_msg> [mmsbox-mm1] [n/a] sent message, type=m-send-req, result=(none)
2012-07-04 10:24:20 [3432] [22] INFO: bearerbox.c:1652 <process_send_res> [MM7] [n/a] Retry later MMSBox Outgoing Queue MMS Send: From 100/TYPE=PLMN, to 0668288316/TYPE=PLMN, msgsize=7511: msgid=[N/A]
2012-07-04 10:24:22 [3432] [5] INFO: mmsbox_mm1.c:566 <handle_mm1> [mmsbox-mm1] [n/a] GPRS turned off returned: 0
   SMSC `nokiaphone' re-started


[< at >< at >THALES GROUP RESTRICTED< at >< at >]

_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Putting Mbuni into a MVNO setup, possible?

Henrik Aagaard Sørensen — 2012-07-05T13:46:19

I have no experience with a MMS gateway / MMSC, but I'm looking for a
open source MMSC which can be integrated into a SIGTRAN MVNO setup.

Does anyone have any experience in this field?

Regards,
Henrik

Re: Connection to MMSC fails - MM1

HARLOW Peter — 2012-07-04T13:28:53

De : users-bounces< at >mbuni.org [mailto:users-bounces< at >mbuni.org] De la part de HARLOW Peter
Envoyé : 04 July 2012 13:53
À : users< at >mbuni.org
Objet : Re: [Users] Connection to MMSC fails - MM1


On turning off eth0, the problem now shifts to reaching the network. Starting the network with pon and then accessing the mmsc with a web browser with the proxy set appropriately works.

Mbuni frequently, but not always, fails to connect.

2012-07-04 15:16:37 [3118] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 15:16:37 [3118] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 15:16:37 [3118] [5] ERROR: mmsbox_mm1.c:681 <fetch_content> [mmsbox-mm1] [n/a] failed to fetch/post content to host http://mms.bouyguestelecom.fr/mms/wapenc [proxy: 62.201.129.226:8080] [http_status=7] : Failed to connect to 62.201.129.226: Network is unreachable
2012-07-04 15:16:38 [3118] [5] DEBUG: Octet string at 0x112ad4f8:
2012-07-04 15:16:38 [3118] [5] DEBUG:   len:  0
2012-07-04 15:16:38 [3118] [5] DEBUG:   size: 0
2012-07-04 15:16:38 [3118] [5] DEBUG:   immutable: 0
_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Re: Connection to MMSC fails - MM1

HARLOW Peter — 2012-07-04T11:52:49

On further investigation this appears to be a local routing problem - I think the data for http://mms.bouyguestelecom.fr/mms/wapenc is going through eth0<http://mms.bouyguestelecom.fr/mms/wapenc%20is%20going%20through%20eth0>, not ppp0.

[< at >< at >THALES GROUP RESTRICTED< at >< at >]

De : users-bounces< at >mbuni.org [mailto:users-bounces< at >mbuni.org] De la part de HARLOW Peter
Envoyé : 04 July 2012 10:58
À : users< at >mbuni.org
Objet : [Users] Connection to MMSC fails - MM1

Hello,

I have a partially working mmsbox setup. I am trying to send MMS messages via a mobile phone using the 'custom' mmsc type in mbuni.

Occasionally, it works. Mostly, however, the connection to the service provider mmsc fails.

Any ideas gratefully received.

Regards,

Pete.


   SMSC `nokiaphone' shut down


arg 0: pon
arg 1: gprs
2012-07-04 10:23:39 [3432] [5] INFO: mmsbox_mm1.c:391 <handle_mm1> [mmsbox-mm1] [n/a] start_gprs returned PID: 21670
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `application/vnd.wap.multipart.related', WSP 1.2 to 0x0033.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `type', WSP 1.2 to 0x0009.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `start', WSP 1.2 to 0x000a.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `image/jpeg', WSP 1.2 to 0x001e.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 10:23:39 [3432] [5] DEBUG: WSP: Mapping `Content-Location', WSP 1.3 to 0x000e.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `text/plain', WSP 1.2 to 0x0003.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Location', WSP 1.3 to 0x000e.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `application/smil', WSP 1.2 to 0xffffffff.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-ID', WSP 1.3 to 0x0040.
2012-07-04 10:23:40 [3432] [5] DEBUG: WSP: Mapping `Content-Type', WSP 1.3 to 0x0011.
2012-07-04 10:24:20 [3432] [5] ERROR: mmsbox_mm1.c:681 <fetch_content> [mmsbox-mm1] [n/a] failed to fetch/post content to host http://mms.bouyguestelecom.fr/mms/wapenc [proxy: 62.201.137.017:8080] [http_status=28] : connect() timed out!
2012-07-04 10:24:20 [3432] [5] DEBUG: Octet string at 0x11b042f0:
2012-07-04 10:24:20 [3432] [5] DEBUG:   len:  0
2012-07-04 10:24:20 [3432] [5] DEBUG:   size: 0
2012-07-04 10:24:20 [3432] [5] DEBUG:   immutable: 0
2012-07-04 10:24:20 [3432] [5] DEBUG: Octet string dump ends.
2012-07-04 10:24:20 [3432] [5] ERROR: mmsbox_mm1.c:519 <handle_mm1> [mmsbox-mm1] [n/a] Sending failed: (none), (none)!
2012-07-04 10:24:20 [3432] [22] INFO: mmsbox_mm1.c:352 <send_msg> [mmsbox-mm1] [n/a] sent message, type=m-send-req, result=(none)
2012-07-04 10:24:20 [3432] [22] INFO: bearerbox.c:1652 <process_send_res> [MM7] [n/a] Retry later MMSBox Outgoing Queue MMS Send: From 100/TYPE=PLMN, to 0668288316/TYPE=PLMN, msgsize=7511: msgid=[N/A]
2012-07-04 10:24:22 [3432] [5] INFO: mmsbox_mm1.c:566 <handle_mm1> [mmsbox-mm1] [n/a] GPRS turned off returned: 0
   SMSC `nokiaphone' re-started


[< at >< at >THALES GROUP RESTRICTED< at >< at >]

_______________________________________________
Users mailing list
Users< at >mbuni.org
http://lists.mbuni.org/mailman/listinfo/users