gmane.editors.geany.general

Re: [Geany-Users] Reflow lines

Lex Trotman — 2013-05-18T01:58:41

Mike,

A PR which re-wrote reflow and corrected an off by one in line breaking (so
they are both now the same) was committed to git on Apr 20. It leaves the
cursor at the start of a line, so your problem should not occur.

Cheers
Lex


On 18 May 2013 10:11, Mike Miller <geany-users-9N9vo3BbZlHk1uMJSBkQmQ< at >public.gmane.org> wrote:

_______________________________________________
Users mailing list
Users-cnFmAm88PdhNzA81UIdiqw< at >public.gmane.org
https://lists.geany.org/cgi-bin/mailman/listinfo/users

[Geany-Users] Reflow lines

Mike Miller — 2013-05-18T00:11:50

Any developers on here?  I'd like to ask for a micro-enhancement.

I have geany open all the time (v1.22) and use the "reflow lines/block" (Ctrl+J) 
command often to wrap very long strings I've pasted in.

It works.  However when it does, it scrolls the viewport over to where the end 
of the line was.  This makes the document now invisible.  I have to then grab 
the mouse and move the scroll bar over.  Could be done hitting the home key too 
I suppose but I usually forget.

So the question is, could Ctrl+J Reflow scroll back to the first column when it 
is finished?

Re: [Geany-Users] Auto-close plugin for brackets

Pavel Roschin — 2013-05-15T13:12:49


Thanks you, this was a bug: I guess you use spaces for indentation,
but I tested it on tabs indentation.

I fixed it right now, check git please.

Re: [Geany-Users] Auto-close plugin for brackets

M Tian — 2013-05-15T12:32:12


Thanks Pavel. The auto completion of curly brackets and the "improved auto 
indentation" features are useful for me. I often write short (~100 lines) 
C++/Java programs in Geany, and the default auto completion feature does not 
work for my usage (e.g. nested curly brackets).

There is one suggestion. Right now, after hitting enter in-between curly 
brackets -> "{|}", the new cursor position seems a bit off. In line 241 of 
the source code, why is it this way?

sci_set_current_position(sci, pos + 2 + start_indent / indent_width, TRUE);

Why not shift to the position where typing normally starts?

sci_set_current_position(sci, pos + 1 + start_indent + indent_width, TRUE);

[Geany-Users] extending TKProE with geany

J.McNamara — 2013-05-15T05:05:17

Hi-

TKProE is an ide for TK. The creator said with an editor like notepad, 
you can save and close the editor file and it will update the proc 
window in TKProE. Is there a trick to that someone here may know of? I 
asked the question here because I'd like to use Geany for this. Right 
now, I edit my changes and save them in Geany. Then I shut down TKProE 
and start it up again and load my project to see the updated changes.

 From the user docs of TKProE...

"Editor
This option specifies the external editor that should be used for 
editing the application procedures.
This editor is run by pressing the Edit button on the
TKproE procedures dialog
. The currently
selected procedure will be opened using the external editor. The TKproE 
application itself will wait
until the external editor program is closed before TKproE will respond 
to any more user input. When
the editor is closed, TKproE will update the source code associated with 
the currently selected
procedure.
Remember to save the file before exiting

[Geany-Users] Auto-close plugin for brackets

Pavel — 2013-05-13T17:23:50

Hello!

I made new plugin that includes almost all possible features concerned
with brackets and quotes auto-closing. I just finished it and maybe you
want to test it. If it is useful and good enoough I will make pull
request.

Previously I made a patch for geany, but decided to put all code
together inside one small plugin.

Here is it:
https://github.com/scriptum/geany-plugins/tree/master/autoclose

Re: [Geany-Users] Tile windows in Windows

מתן הרשקוביץ — 2013-05-12T09:36:02

_______________________________________________
Users mailing list
Users-cnFmAm88PdhNzA81UIdiqw< at >public.gmane.org
https://lists.geany.org/cgi-bin/mailman/listinfo/users

Re: [Geany-Users] Tile windows in Windows

Pierre Joye — 2013-05-12T09:23:08

hi,

On Sun, May 12, 2013 at 9:43 AM, Lex Trotman <elextr< at >gmail.com> wrote:

I think he refers to tile a single window in tile (views or split) so
one can read or edit many parts of the same document within the same
window

Not an editor, but here is the idea:

http://en.wikipedia.org/wiki/Tiling_window_manager

Cheers,
--
Pierre

< at >pierrejoye |  http://www.libgd.org
_______________________________________________
Users mailing list
Users< at >lists.geany.org
https://lists.geany.org/cgi-bin/mailman/listinfo/users

Re: [Geany-Users] Tile windows in Windows

Lex Trotman — 2013-05-12T07:43:32


To get multiple windows you need to run multiple instances of Geany, just
be aware that the configuration is shared between them, the last one closed
will save its configuration over any others.

Cheers
Lex




_______________________________________________
Users mailing list
Users-cnFmAm88PdhNzA81UIdiqw< at >public.gmane.org
https://lists.geany.org/cgi-bin/mailman/listinfo/users

[Geany-Users] Tile windows in Windows

מתן הרשקוביץ — 2013-05-12T07:10:21

_______________________________________________
Users mailing list
Users-cnFmAm88PdhNzA81UIdiqw< at >public.gmane.org
https://lists.geany.org/cgi-bin/mailman/listinfo/users

Re: [Geany-Users] multiple, non-adjacent lines selection

Dimitar Zhekov — 2013-05-08T17:51:35

On Tue, 7 May 2013 21:11:26 +0200
Liviu Andronic <landronimirc-Re5JQEeQqe8AvxtiuMwx3w< at >public.gmane.org> wrote:


A lot of the extra select plugin deals with rectangular selections,
which are a bit of a mess in Scintilla, and incompatible with
multiply selections. So if you find some way to select multiply pieces
of text, you'd better _deactivate_ geanyextrasel to avoid collisions.
I have no plans to support multiply selections.


In X11, Ctrl+Mouse traditionally does rectangular selection, if
supported, and Alt+Mouse moves the current window (WM-dependent).

Re: [Geany-Users] multiple, non-adjacent lines selection

Lex Trotman — 2013-05-08T00:31:23


No you can't, Geany doesn't use scintilla multiple selections.  Note that
Scite doesn't either, wonder why?

Cheers
Lex


_______________________________________________
Users mailing list
Users-cnFmAm88PdhNzA81UIdiqw< at >public.gmane.org
https://lists.geany.org/cgi-bin/mailman/listinfo/users

[Geany-Users] multiple, non-adjacent lines selection

Liviu Andronic — 2013-05-07T19:11:26

Dear all,
Can I use Geany to select multiple, non-adjacent lines? I looked into
the extra selection plugin, but it doesn't seem to support this. For
example I want to select line 3, then hold ctrl and select line 7;
then press delete.

Regards,
Liviu

[Geany-Users] script to delete currently viewed document

2013-05-02T21:41:13

Re: [Geany-Users] setup custom server-side tags

Charles Johannisen — 2013-05-02T09:26:18

Thanks Lex

Just a pity it had to be in the source file and not in a config file so 
that you don't have to compile everything all over again. Especially 
since I installed it via apt-get. Anyway, it worked out fine.
_______________________________________________
Users mailing list
Users-cnFmAm88PdhNzA81UIdiqw< at >public.gmane.org
https://lists.geany.org/cgi-bin/mailman/listinfo/users

Re: [Geany-Users] setup custom server-side tags

Lex Trotman — 2013-05-02T06:37:12

On 2 May 2013 16:09, Charles Johannisen <
charles.johannisen-M9u284wInUQm1CrLE6IgnpGrwCMTu2Xy< at >public.gmane.org> wrote:


This is done in the HTML Lexer (LexHTML.cxx) from the Scintilla project,
which is written in C++, so you need to modify that to recognise your tags.

Cheers
Lex



_______________________________________________
Users mailing list
Users-cnFmAm88PdhNzA81UIdiqw< at >public.gmane.org
https://lists.geany.org/cgi-bin/mailman/listinfo/users

[Geany-Users] setup custom server-side tags

Charles Johannisen — 2013-05-02T06:09:52

Hi,

I would like to know how I can setup the syntax highlighter to recognize 
a custom server-side tag like the PHP <? ?> or ASP <% %>

Thanks
--------------------------------------------------
http://www.tray-international.com
--------------------------------------------------

[Geany-Users] File Saving options

Lex Trotman — 2013-05-02T03:05:20

There have been recent queries about file saving, backups etc.

I have just added a wiki article on how Geany file saving settings and the
save actions plugin works at
http://wiki.geany.org/config/all_you_never_wanted_to_know_about_file_saving

Everyone should read it or forever lose your data.

Cheers
Lex
_______________________________________________
Users mailing list
Users-cnFmAm88PdhNzA81UIdiqw< at >public.gmane.org
https://lists.geany.org/cgi-bin/mailman/listinfo/users

Re: [Geany-Users] Printing for all printers stopped after installing drivers for Canon printer.

Steve — 2013-05-01T19:16:26

I cleared the logs then tried to print again.

I'm guessing the log entry was created when I cancelled the print job
as geany print function never completes.. I tried to start and stop
the print spooler with no change.

thanks,

..steve

Event Viewer->Applications and Services->Microsoft->Windows->PrintService:

Admin:
The document Geany.exe job #1, owned by steve, failed to print on printer Office. Try to 
print the document again, or restart the print spooler.
Data type: NT EMF 1.008. Size of the spool file in bytes: 0. Number of bytes printed: 0. 
Total number of pages in the document: 0. Number of pages printed: 0. Client computer: 
\\SPARKS. Win32 error code returned by the print processor: 259. No more data is available.

Operational:

+ System

   - Provider

    [ Name]  Microsoft-Windows-PrintService
    [ Guid]  {747EF6FD-E535-4D16-B510-42C90F6873A1}

    EventID 372

    Version 0

    Level 2

    Task 26

    Opcode 12

    Keywords 0x8000000000000840

   - TimeCreated

    [ SystemTime]  2013-

Re: [Geany-Users] Printing for all printers stopped after installing drivers for Canon printer.

Frank Lanitz — 2013-05-01T17:56:11

Am 30.04.2013 15:11, schrieb Steve:

Do you see any entry inside the logs of Windows?

Cheers,
Frank


_______________________________________________
Users mailing list
Users-cnFmAm88PdhNzA81UIdiqw< at >public.gmane.org
https://lists.geany.org/cgi-bin/mailman/listinfo/users

Re: [Geany-Users] Is https://lists.geany.org/cgi-bin/mailman/listinfo/users safe.

Matthew Brush — 2013-05-01T14:19:28

According the bug report[1], CACert withdrew their request to have their 
certificate added. But it is funner and easier to bash Mozilla :)

Cheers,
Matthew Brush

[1] https://bugzilla.mozilla.org/show_bug.cgi?id=215243