gmane.comp.handhelds.blackberry.barry.devel

Re: Error on "bjavaloader dir"

Eddy Castillo — 2013-05-20T12:44:50

Hi Chris,

I also have another 9800 that has no issues, but I don't have access right
now to it to check the OS version. The one I have here has 6.0 Bundle 2949
(v6.0.0.668, Platform 6.6.0.236). Do you think it has to do with a change
in the OS?

Regards,



2013/5/17 Chris Frey <cdfrey-4/nNOD19pEMY+eTVAdjFZg< at >public.gmane.org>

Re: Error on "bjavaloader dir"

Chris Frey — 2013-05-17T21:34:45

Hi Eddy,

I just tested here with a 9800 device, and it worked fine.  Perhaps it is
a device firmware issue?

The device I'm using has the following version:

6.0 Bundle 2921 (v6.0.0.666, Platform 6.6.0.241)

If yours is older, you might try upgrading.  If mine is older, then
perhaps I should. :-)

- Chris


------------------------------------------------------------------------------
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities. Easily and
efficiently configure, manage, and operate all of your security controls
from a single console and one unified framework. Download a free trial.
http://p.sf.net/sfu/alienvault_d2d

Re: Error on "bjavaloader dir"

Eddy Castillo — 2013-05-17T15:05:26

Hi Chris,

Thanks for the answer. I'm not sure if this is a change in the protocol in
the 9800 alone. I'm testing different phones and already saw the same
problem with bjavaloader in the 9900 model also.

The output in "javaloader -v dir" using the 9800 is:

----------------------------------------------------------------------
./bjavaloader -v dir
...
SocketZero::RawReceive: Endpoint 2
Received:
    00000000: 03 00 fc 07 00 03 00 06 00 09 00 0c 00 0f 00 12
 ................
    00000010: 00 15 00 18 00 1b 00 1e 00 21 00 24 00 27 00 2a
 .........!.$.'.*
    00000020: 00 2d 00 30 00 33 00 36 00 39 00 3c 00 3f 00 42
 .-.0.3.6.9.<.?.B
    00000030: 00 45 00 48 00 4b 00 5d 00 60 00 63 00 7b 00 7e
 .E.H.K.].`.c.{.~
    00000040: 00 81 00 9c 00 9f 00 a2 00 de 01 28 01 2b 01 2f
 ...........(.+./
    00000050: 01 33 01 36 01 39 01 3c 01 3f 01 42 01 45 01 48
 .3.6.9.<.?.B.E.H
    00000060: 01 4b 01 4e 01 51 01 54 01 57 01 5a 01 5d 01 60
 .K.N.Q.T.W.Z.].`
    00000070: 01 63 01 66 01 69 01 6c 01 6f 01 72 01 75 01 78

Re: Error on "bjavaloader dir"

Chris Frey — 2013-05-17T02:36:12

Hi Eddy,

Thanks for sending the output.  It looks like Barry is expecting an ACK
response, but is receiving the data right away instead.  Perhaps this
is a change in the 9800 protocol behaviour.

Could you post the tail end of a 'dir' command with verbose turned on
with the -v option?

If you feel like compiling (again?), you might try this patch to see if
this makes any difference in how far it gets.

Thanks,
- Chris


diff --git a/src/m_javaloader.cc b/src/m_javaloader.cc
index ce354c8..df2439f 100644
--- a/src/m_javaloader.cc
+++ b/src/m_javaloader.cc
< at >< at > -596,20 +596,15 < at >< at > void JavaLoader::GetDir(JLPacket &packet,
 bool include_subdirs)
 {
 m_socket->Packet(packet);
-if( packet.Command() != SB_COMMAND_JL_ACK ) {
-ThrowJLError("JavaLoader::GetDir", packet.Command());
-}
-
-// ack response will contain length of module ID array in next packet
-unsigned int expect = packet.Size();
+Data &response = packet.GetReceive();
 
-if( expect > 0 ) {
-Data &response = packet.GetReceive();
+if( packet.C

Error on "bjavaloader dir"

Eddy Castillo — 2013-05-16T16:27:54

Hi all,

I'am trying to get the list of installed modules on a Blackberry 9800 using
bjavaloader with the "dir" command, but the response I get from bjavaloader
is the following:

=============================================================
Packet command: 110Expected: 100Packet:
    00000000: 03 00 08 00 64 00 6c 02                          ....d.l.


Barry::Error caught: JavaLoader::GetDir: unexpected packet command code:
0x6e
=============================================================

The phone model is 9800 with OS 6.0 Bundle 2949.

I tried using barry 0.18.2 and barry 0.18.4 on Ubuntu 12.04.

All other commands in javaloader seem to be working ok. I don't know if
this is a bug with barry or I am missing something here. Any comment will
be appreciated .


Best Regards,

Re: USB Tether on 9930BoldgivesTimeoutinusb_bulk_read

Eddie Atherton — 2013-04-12T02:21:48

Chris Frey <cdfrey-4/nNOD19pEMY+eTVAdjFZg< at >public.gmane.org> wrote on 04/11/2013 05:37:24 PM:

:-)

I already have that, and it does indeed return 2 DNS IPs back to me.  The 
issue is that the scripts that are supposed to take those values and 
update /etc/resolv.conf are all borked.  :-)

Cheers,
Eddie------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter_______________________________________________
Barry-devel mailing list
Barry-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f< at >public.gmane.org
https://lists.sourceforge.net/lists/listinfo/barry-devel

Re: USB Tether on 9930 BoldgivesTimeoutinusb_bulk_read

Chris Frey — 2013-04-12T00:37:24

Glad to hear it's working!



I think that's the "usepeerdns" pppd option.

- Chris


------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter

Re: USB Tether on 9930 BoldgivesTimeoutinusb_bulk_read

Eddie Atherton — 2013-04-10T01:13:41

Chris Frey <cdfrey-4/nNOD19pEMY+eTVAdjFZg< at >public.gmane.org> wrote on 04/09/2013 11:57:00 AM:

<barry-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f< at >public.gmane.org>, 
added 

Well, who said rules weren't meant to be broken.

I downloaded and compiled the latest version and that seems to have solved 
my issues.

Now all I have to do is get it so the DNS is automatically assigned.  :-)

Cheers,
Eddie
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter_______________________________________________
Barry-devel mailing list
Barry-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f< at >public.gmane.org
https://lists.sourceforge.net/lists/listinfo/barry-devel

Re: USB Tether on 9930 Bold givesTimeoutinusb_bulk_read

Chris Frey — 2013-04-09T18:57:00

If it helps, note that my release builds available on SourceForge are
available in repository form, and are signed, as noted in the release
announcement.

- Chris


------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter

Re: USB Tether on 9930 Bold givesTimeoutinusb_bulk_read

Eddie Atherton — 2013-04-09T14:25:46

Chris Frey <cdfrey-4/nNOD19pEMY+eTVAdjFZg< at >public.gmane.org> wrote on 04/08/2013 06:45:00 PM:

<barry-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f< at >public.gmane.org>, 
available 

Chris,

Sorry, I wasn't clear that I only have access to pre-built code.  I do not 
have have the tool chain to be able to compile from source.

Let me see what is involved to see if I can get the latest version added 
to our repository.

Cheers,
Eddie
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter_______________________________________________
Barry-devel mailing list
Barry-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f< at >public.gmane.org
https://lists.sourceforge.net/lists/listinfo/ba

Re: USB Tether on 9930 Bold gives Timeoutinusb_bulk_read

Chris Frey — 2013-04-09T01:45:00

Well, I can give you a patch and you can rebuild your
0.17.1 packages instead I suppose.  What distro
are you using?

- Chris


------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter

Re: USB Tether on 9930 Bold gives Timeoutinusb_bulk_read

Eddie Atherton — 2013-04-08T23:10:55

Chris Frey <cdfrey-4/nNOD19pEMY+eTVAdjFZg< at >public.gmane.org> wrote on 04/08/2013 03:59:26 PM:

<barry-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f< at >public.gmane.org>, 
timeout
differently.

The repository I have to use for my company laptop only has 17.1 available 
at the moment, sorry.

Same result with barry-minimal:

sudo pppd call barry-minimal
exception caught in main(): (-110, No error): Timeout in usb_bulk_read
Script /usr/sbin/chat -f /etc/chatscripts/barry-minimal.chat finished (pid 
2441), status = 0x2
Connect script failed
Script /usr/sbin/pppob -P <removed> finished (pid 2440), status = 0x1

Cheers,
Eddie
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdot

Re: USB Tether on 9930 Bold gives Timeout inusb_bulk_read

Chris Frey — 2013-04-08T22:59:26

Hi Eddie,

Are you able to try the latest 0.18.4 version?  There was a pppob timeout
fix that may affect you.

If not, try the barry-minimal script, and see if that works any differently.

Thanks,
- Chris


------------------------------------------------------------------------------
Minimize network downtime and maximize team effectiveness.
Reduce network management and security costs.Learn how to hire 
the most talented Cisco Certified professionals. Visit the 
Employer Resources Portal
http://www.cisco.com/web/learning/employer_resources/index.html

USB Tether on 9930 Bold gives Timeout in usb_bulk_read

Eddie Atherton — 2013-04-08T22:55:54

Hi,

I'm trying to tether a 9930 Bold using USB, and get a Timeout in 
usb_bulk_read error:

exception caught in main(): (-110, No error): Timeout in usb_bulk_read
Script /usr/sbin/chat -f /etc/chatscripts/barry-verizon.chat finished (pid 
27733), status = 0x2
Connect script failed
Script /usr/sbin/pppob -P <removed> -l /tmp/pppob.log -v finished (pid 
27732), status = 0x1

Here's the last part of the pppob.log file:

IPModem: Password request packet:
    00000000: 02 00 00 00 b2 c9 e0 6b 0a 00 00 00 0a 00 00 00 
.......k........
    00000010: 04 bf 1d 33 1c 00 00 00 78 56 34 12 ...3....xV4.

BulkWrite to endpoint 0x3:
    00000000: 03 00 00 00 a8 51 5f 1c e9 a5 f2 5e d7 64 77 f3 
.....Q_....^.dw.
    00000010: 7d ef e2 3e 75 87 b9 58 78 56 34 12 }..>u..XxV4.

IPModem: Read password response.
    00000000: 04 00 00 00 b3 c9 e0 6b 0a 00 00 00 0a 00 00 00 
.......k........
    00000010: 01 00 00 00 1c 00 00 00 78 56 34 12 ........xV4.

IPModem: Password accepted.

IPModem: Re-sending Start Response:

BulkWrite

Branch 0.19.0 merged, 0.18.x created

Chris Frey — 2013-04-05T21:25:51

Now that 0.18.4 is out, I've merged the v0.19.0 development branch into
master, which includes all of Toby Gray's changes from a few months ago.

I've also opened branch v0.18.x for bugfixes on the 0.18 tree, which I
hope will be minor.

Enjoy,
- Chris


------------------------------------------------------------------------------
Minimize network downtime and maximize team effectiveness.
Reduce network management and security costs.Learn how to hire 
the most talented Cisco Certified professionals. Visit the 
Employer Resources Portal
http://www.cisco.com/web/learning/employer_resources/index.html

Barry Desktop version 0.18.4 released

Chris Frey — 2013-04-05T20:45:36

The Barry development team is pleased to announce the release of
version 0.18.4.  Source and binary packages are available for immediate
download at the URLs below.

Barry is an Open Source application that provides a Desktop GUI,
synchronization, backup, restore, program management, and raw channel
support for BlackBerry devices.  Unfortunately, Barry does not yet
support the new Z10 devices.

Barry is primarily developed on Linux, but is intended as a cross platform
library and application set, targeting Linux, BSD, 32/64bit, and
big/little endian systems.  The command line utilities have been reported
to work on Mac OSX and Windows using Cygwin and libusb.


What's New?
-----------

This is mostly a maintenance release, which includes:

        * New barry-doc package which includes the html user docs

        * Improvements in translation support: French and partial Spanish

        * Fixes to pppob (modem support), fixing potential hangs on shutdown,
          and including a fix from Kurt for Bold 9930

Re: Can't tether 9600 Blackberry

2013-03-30T01:57:23

I got it to work by building from source with no changes.  Maybe I was missing a library?
------Original Message------
From: Chris Frey
To: William J Campbell
Cc: barry-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f< at >public.gmane.org
Subject: Re: Can't tether 9600 Blackberry
Sent: Mar 29, 2013 20:38

On Tue, Mar 26, 2013 at 03:00:37PM -0500, William Campbell wrote:

Just a quick response until I get a chance to look at it more closely.
I'd give the barry-minimal scripts a try as well, and see if they work
any better.  Sometimes the special settings we had on various providers
are not needed anymore.

- Chris


God bless you,

William

------------------------------------------------------------------------------
Own the Future-Intel(R) Level Up Game Demo Contest 2013
Rise to greatness in Intel's independent game demo contest. Compete 
for recognition, cash, and the chance to get your game on Steam. 
$5K grand prize plus 10 genre and skill prizes. Submit your demo 
by 6/6/13. http://altfarm.mediaplex.com/ad/ck/12124-1

Re: Can't tether 9600 Blackberry

Chris Frey — 2013-03-30T01:38:52

Just a quick response until I get a chance to look at it more closely.
I'd give the barry-minimal scripts a try as well, and see if they work
any better.  Sometimes the special settings we had on various providers
are not needed anymore.

- Chris


------------------------------------------------------------------------------
Own the Future-Intel(R) Level Up Game Demo Contest 2013
Rise to greatness in Intel's independent game demo contest. Compete 
for recognition, cash, and the chance to get your game on Steam. 
$5K grand prize plus 10 genre and skill prizes. Submit your demo 
by 6/6/13. http://altfarm.mediaplex.com/ad/ck/12124-176961-30367-2

Can't tether 9600 Blackberry

William Campbell — 2013-03-26T20:00:37

Any suggestions would be helpful.  I have included the logs.  It seems to
die in IPModem right after accepting the password on the first re-try to
send the Start Response.

I'm running linuxmint 14 (ubuntu 12.10) and using the latest 64bit binaries
for barry.

Attached are the logs.

Thanks!

Re: bio tool & calendar - all & mime

Chris Frey — 2013-03-11T20:22:48

Thanks Nicolas!  Applied.

- Chris


------------------------------------------------------------------------------
Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester  
Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the  
endpoint security space. For insight on selecting the right partner to 
tackle endpoint security challenges, access the full report. 
http://p.sf.net/sfu/symantec-dev2dev

bio tool & calendar - all & mime

Nicolas — 2013-03-11T13:22:31

Hi,

A small patch to permit to convert "Calendar - All" to mime file with
bio command line tool.

Regards,

Nicolas


------------------------------------------------------------------------------
Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester  
Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the  
endpoint security space. For insight on selecting the right partner to 
tackle endpoint security challenges, access the full report. 
http://p.sf.net/sfu/symantec-dev2dev_______________________________________________
Barry-devel mailing list
Barry-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f< at >public.gmane.org
https://lists.sourceforge.net/lists/listinfo/barry-devel